Rapid warming has resulted in more wildfires in northeastern Australia.

Wildfires, or bushfires, are one of the most destructive natural disasters in Australia, which can cause many deaths of stock, native animals, sometimes humans, and huge impacts on infrastructure. Reconstructing past wildfires and exploring the links between wildfires and climate are essential for understanding the dynamics of wildfires and for predicting future risks. In this study, the frequency of wildfires in northeastern Australia over the past 25,000 years was reconstructed from the charcoal records preserved in peat and lake sediments. The results showed that the frequency of wildfires were relatively low during the cool last glacial period and the warm mid Holocene, indicating that the stable mean climate conditions, whether cool or warm, would not independently initiate increased wildfires in northeastern Australia. The most frequent wildfires occurred during the last deglaciation period, when Earth's climate warmed and the warming rate was the highest over the last 25,000 years, before recent anthropogenic warming. It suggested that the rapid global warming may greatly increase the likelihood of dangerous wildfires in northeastern Australia during the last deglaciation. The wildfires reactivated over the most recent 4000 years, coinciding with amplified climate variability and probably an expansion of human activity. The rapid warming of global climate during the last deglaciation period is an ideal analogue for current anthropogenic global warming. The comparison between fire count and temperature changes in Australia since 2003 also showed that the fire frequency in Australia in recent years is more closely correlated with the warming amplitude, rather than mean temperature. Our results implied that the wildfire risk in northeastern Australia may increase further under the expected accelerating global warming, if human management systems does not intrude. Wildfire modeling could benefit greatly by considering the relationship of fires with climate variability rather than only with stable climate scenarios.

Impacts of land reclamation on tidal marsh 'blue carbon' stocks.

Tidal marsh ecosystems are among earth's most efficient natural organic carbon (C) sinks and provide myriad ecosystem services. However, approximately half have been 'reclaimed' - i.e. converted to other land uses - potentially turning them into sources of greenhouse gas emissions. In this study, we applied C stock measurements and paleoanalytical techniques to sediments from reclaimed and intact tidal marshes in southeast Australia. We aimed to assess the impacts of reclamation on: 1) the magnitude of existing sediment C stocks; 2) ongoing C sequestration and storage; and 3) C quality. Differences in sediment horizon depths (indicated by Itrax-XRF scanning) and ages (indicated by lead-210 and radiocarbon dating) suggest a physical loss of sediments following reclamation, as well as slowing of sediment accumulation rates. Sediments at one meter depth were between ~2000 and ~5300 years older in reclaimed cores compared to intact marsh cores. We estimate a 70% loss of sediment C in reclaimed sites (equal to 73 Mg C ha-1), relative to stocks in intact tidal marshes during a comparable time period. Following reclamation, sediment C was characterized by coarse particulate organic matter with lower alkyl-o-alkyl ratios and higher amounts of aromatic C, suggesting a lower extent of decomposition and therefore lower likelihood of being incorporated into long-term C stocks compared to that of intact tidal marshes. We conclude that reclamation of tidal marshes can diminish C stocks that have accumulated over millennial time scales, and these losses may go undetected if additional analyses are not employed in conjunction with C stock estimates.

How significant is atmospheric metal contamination from mining activity adjacent to the Tasmanian Wilderness World Heritage Area? A spatial analysis of metal concentrations using air trajectories models.

This study investigated metal contamination from historical mining in lakes in the Tasmanian Wilderness World Heritage Area (TWWHA) and surrounding region. The largest increase in sedimentation and metal contamination occurred ca. 1930 when open-cut mining commenced and new mining technology was introduced into the region. The geochemical signal of lake sediments changed from reflecting the underlying geology and lithology to that reflecting mining activities. The HYSPLIT air particle trajectory model explains metal distribution in the lakes, with those in the northwest region closest to the mines having the highest metal contamination. Lake metal concentrations since mining activities commenced are in the order: Owen Tarn > Basin Lake > Perched Lake > Lake Dove > Lake Dobson > Lake Cygnus, with Perched Lake and Lakes Dove, Dobson and Cygnus in the TWWHA. Metal contamination affected centres up to 130 km down-wind of mining sites. Enrichment factors (EF) for Pb, Cu, As and Cd are >1 for all lakes, with Owen Tarn and Basin Lake having very high EFs for Cu and Pb (98 and 91, respectively). Pb, Cu, As and Cd concentrations are above the Australia/New Zealand lower sediment guidelines, with Pb, Cu and As above the high guidelines in Owen Tarn and Basin Lake. This study demonstrated the legacy of metal contamination in the TWWHA by mining activities and the consequences of a lack of execution of environmental regulations by past governments in Tasmania.

Identifying heavy metal levels in historical flood water deposits using sediment cores.

When designing mitigation and restoration strategies for aquatic systems affected by heavy metal contamination, we must first understand the sources of these pollutants. In this study, we introduce a methodology that identifies the heavy metal levels in floodplain lake sediments deposited by one source; fluvial floods. This is done by comparing sediment core heavy metal profiles (i.e., historical pollution trends) to physical and chemical properties of sediments in these cores (i.e., historical flooding trends). This methodology is applied to Willsmere and Bolin Billabongs, two urban floodplain lakes (billabongs) of the Yarra River (South-East Australia). Both billabongs are periodically inundated by flooding of the Yarra River and one billabong (Willsmere Billabong) is connected to an urban stormwater drainage network. 1-2-m long sediment cores (containing sediment deposits up to 500 years old) were taken from the billabongs and analysed for heavy metal concentrations (arsenic, chromium, copper, lead, nickel, zinc). In cores from both billabongs, arsenic concentrations are high in the flood-borne sediments. In Bolin Billabong, absolute metal levels are similar in flood and non-flood deposits. In Willsmere Billabong, absolute copper, lead and zinc levels were generally lower in fluvial flood-borne sediments in the core compared to non-fluvial sediments. This suggests that heavy metal concentrations in Bolin Billabong sediments are relatively similar regardless of whether or not fluvial flooding is occurring. However for Willsmere Billabong, heavy metal concentrations are high when overland runoff, direct urban stormwater discharges or atmospheric deposition is occurring. As such, reducing the heavy metal concentrations in these transport pathways will be of great importance when trying to reduce heavy metal concentrations in Willsmere Billabong sediments. This study presents a proof-of-concept that can be applied to other polluted aquatic systems, to understand the importance of river floods in the contamination of the bed sediments of aquatic systems. As a cost effective and less time consuming alternative to extensive field monitoring, our proposed method can be used to identify the key sources of pollution and therefore support the development of effective management strategies.

History of human impact on Lake Kutubu, Papua New Guinea: The geochemical signatures of oil and gas mining activities in sediments.

Lake Kutubu, a large tropical lake in Papua New Guinea, is well known for its ecological importance; however, there have been recent changes to the pristine nature of this lake due to activities associated with the largest oil and gas project in PNG. The aim of this study was to determine the geochemical profile of sediment cores of Lake Kutubu and to comprehend the contamination changes undergone in this lake due to mining activities utilising the hydraulic fracturing method. Sediment core profiles of Na, Mg, Al, Si, P, Ca, Ti, Cr, Fe, Mn, Ni, Cu, Zn, As, Se, Sr, Cd, Ba, Ce, Pb and U, grain size and dating analyses were conducted for five sites in the lake. Grain size and dating demonstrated that the northwest side of Lake Kutubu has sediments of allocthonous origin while the southeast sediments are of autochthonous origin. Ba was the element with the largest changes in concentrations since 1990 and the best tracer of mining activities near the lake. Sites KTB 02 and KTB 10 northwest of the lake showed the most distinct changes in element concentrations. Element enrichment factors (EF = 2.8, 4.2 and 3.2 respectively) demonstrated that Mn, Se and Ba have undergone a moderate enrichment in the lake since mining activities started. Ni, Cd and Se concentrations exceed sediment guidelines in some samples. No guideline is available for Ba, and special attention should be given to this element in this lake. This study demonstrated that Lake Kutubu oil/gas extraction activities are significant sources of elements to this lake and highlights the need for studies on the partitioning and speciation of elements to understand organism metal exposure.

Sediment cores as archives of historical changes in floodplain lake hydrology.

Anthropogenic activities are contributing to the changing hydrology of rivers, often resulting in their degradation. Understanding the drivers and nature of these changes is critical for the design and implementation of effective mitigation strategies for these systems. However, this can be hindered by gaps in historical measured flow data. This study therefore aims to use sediment cores to identify historical hydrological changes within a river catchment. Sediment cores from two floodplain lakes (billabongs) in the urbanised Yarra River catchment (Melbourne, South-East Australia) were collected and high resolution images, trends in magnetic susceptibility and trends in elemental composition through the sedimentary records were obtained. These were used to infer historical changes in river hydrology to determine both average trends in hydrology (i.e., coarse temporal resolution) as well as discrete flood layers in the sediment cores (i.e., fine temporal resolution). Through the 20th century, both billabongs became increasingly disconnected from the river, as demonstrated by the decreasing trends in magnetic susceptibility, particle size and inorganic matter in the cores. Additionally the number of discrete flood layers decreased up the cores. These reconstructed trends correlate with measured flow records of the river through the 20th century, which validates the methodology that has been used in this study. Not only does this study provide evidence on how natural catchments can be affected by land-use intensification and urbanisation, but it also introduces a general analytical framework that could be applied to other river systems to assist in the design of hydrological management strategies.

History of metal contamination in Lake Illawarra, NSW, Australia.

Lake Illawarra has a long history of sediment contamination, particularly by metals, as a result of past and current industrial operations and land uses within the catchment. In this study, we examined the history of metal contamination in sediments using metal analysis and (210)Pb and (137)Cs dating. The distributions of copper, zinc, arsenic, selenium, cadmium and lead concentrations within sediment cores were in agreement with historical events in the lake, and indicated that metal contamination had been occurring since the start of industrial activities in Port Kembla in the late 1800 s. Most metal contamination, however, has occurred since the 1960s. Sedimentation rates were found to be 0.2 cm year(-1) in Griffins Bay and 0.3 cm year(-1) in the centre of the lake. Inputs from creeks bringing metals from Port Kembla in the northeast of the lake and a copper slag emplacement from a former copper refinery on the Windang Peninsula were the main sources of metal inputs to Lake Illawarra. The metals of highest concern were zinc and copper, which exceeded the Australian and New Zealand sediment quality guideline values at some sites. Results showed that while historical contamination persists, current management practices have resulted in reduced metal concentrations in surface sediments in the depositional zones in the centre of the lake.

A landscape-scale approach to examining the fate of atmospherically derived industrial metals in the surficial environment.

Industrial metals are now ubiquitous within the atmosphere and their deposition represents a potential source of contamination to surficial environments. Few studies, however, have examined the environmental fate of atmospheric industrial metals within different surface environments. In this study, patterns of accumulation of atmospherically transported industrial metals were investigated within the surface environments of the Snowy Mountains, Australia. Metals, including Pb, Sb, Cr and Mo, were enriched in aerosols collected in the Snowy Mountains by 3.5-50 times pre-industrial concentrations. In sedimentary environments (soils, lakes and reservoirs) metals showed varying degrees of enrichment. Differences were attributed to the relative degree of atmospheric input, metal sensitivity to enrichment, catchment area and metal behaviour following deposition. In settings where atmospheric deposition dominated (ombrotrophic peat mires in the upper parts of catchments), metal enrichment patterns most closely resembled those in collected aerosols. However, even in these environments significant dilution (by 5-7 times) occurred. The most sensitive industrial metals (those with the lowest natural concentration; Cd, Ag, Sb and Mo) were enriched throughout the studied environments. However, in alpine tarn-lakes no other metals were enriched, due to the dilution of pollutant-metals by catchment derived sediment. In reservoirs, which were located lower within catchments, industrial metals exhibited more complex patterns. Particle reactive metals (e.g. Pb) displayed little enrichment, implying that they were retained up catchment, whereas more soluble metals (e.g., Cu and Zn) showed evidence of concentration. These same metals (Cu and Zn) were depleted in soils, implying that they are preferentially transported through catchments. Enrichment of other metals (e.g. Cd) varied between reservoirs as a function of contributing catchment area. Overall this study showed that the fate of atmospherically derived metals is complex, and depends upon metal behaviour and geomorphic processes operating at landscape scales.

Recent history of sediment metal contamination in Lake Macquarie, Australia, and an assessment of ash handling procedure effectiveness in mitigating metal contamination from coal-fired power stations.

This study assessed historical changes in metal concentrations in sediments of southern Lake Macquarie resulting from the activities of coal-fired power stations, using a multi-proxy approach which combines (210)Pb, (137)Cs and metal concentrations in sediment cores. Metal concentrations in the lake were on average, Zn: 67 mg/kg, Cu: 15 mg/kg, As: 8 mg/kg, Se: 2mg/kg, Cd: 1.5 mg/kg, Pb: 8 mg/kg with a maximum of Zn: 280 mg/kg, Cu: 80 mg/kg, As: 21 mg/kg, Se: 5 mg/kg, Cd: 4 mg/kg, Pb: 48 mg/kg. The ratios of measured concentrations in sediment cores to their sediment guidelines were Cd 1.8, As 1.0, Cu 0.5, Pb 0.2 and Zn 0.2, with the highest concern being for cadmium. Of special interest was assessment of the effects of changes in ash handling procedures by the Vales Point power station on the metal concentrations in the sediments. Comparing sediment layers before and after ash handling procedures were implemented, zinc concentrations have decreased 10%, arsenic 37%, selenium 20%, cadmium 38% and lead 14%. An analysis of contaminant depth profiles showed that, after implementation of new ash handling procedures in 1995, selenium and cadmium, the main contaminants in Australian black coal had decreased significantly in this estuary.

Diatom community response to climate variability over the past 37,000 years in the sub-tropics of the Southern Hemisphere.

Climate change is impacting global surface water resources, increasing the need for a deeper understanding of the interaction between climate and biological diversity. This is particularly the case in the Southern Hemisphere sub-tropics, where little information exists on the aquatic biota response to climate variations. Palaeolimnological techniques, in particular the use of diatoms, are well established and can significantly contribute to the understanding of climatic variability and the impacts that change in climate have on aquatic ecosystems. A sediment core from Lake McKenzie, Fraser Island (Australia), was used to investigate interactions between climate influences and aquatic ecosystems. This study utilises a combination of proxies including biological (diatom), geochemical and chronological techniques to investigate long-term aquatic changes within the perched-dune lake. A combination of (210)Pb and AMS (14)C dates showed that the retrieved sediment represented a history of ca. 37,000 cal.yBP. The sedimentation rate in Lake McKenzie is very low, ranging on average from 0.11 mm to 0.26 mm per year. A sediment hiatus was observed between ca. 18,300 and 14,000 cal.yBP suggesting a period of dry conditions at the site. The diatom record shows little variability over the period of record, with benthic, freshwater acidic tolerant species dominating. Relative abundance of planktonic species and geochemical results indicates a period of increased water depth and lake productivity in the early Holocene and a gradual decrease in effective precipitation throughout the Holocene. Results from this study not only support earlier work conducted on Fraser Island using pollen reconstructions but also demonstrate that diatom community diversity has been relatively consistent throughout the Holocene and late Pleistocene with only minor cyclical fluctuation evident. This record is consistent with the few other aquatic palaeoecological records from the Southern Hemisphere sub-tropics.

Use of 210Pb and 137Cs to simultaneously constrain ages and sources of post-dam sediments in the Cordeaux reservoir, Sydney, Australia.

Environmental radionuclides can be employed as tracers of sediment movement and delivery to water bodies such as lakes and reservoirs. The chronologies of sediments that have accumulated in the Cordeaux reservoir in Sydney, Australia, were determined by the rate of change of (210)Pb(ex) with depth and indicate slow accretion in the reservoir. The ratio of enrichment of radionuclides in sediment cores to (210)Pb(ex) and (137)Cs concentrations in a reference soil sample within the Cordeaux catchment indicates that the dominant source of sediment in the Cordeaux reservoir is surface erosion (detachment and removal of sediment at depths less than 30 cm). However, in the Kembla Creek arm of the reservoir a mixture of sources was detected and includes sheet and rill erosion together with sub-soil contributions. Implications for the utility of these radionuclide sedimentation assessments, especially where samples are limited, are that well-constrained chronologies and sources of soil erosion are facilitated.

Vertical distributions of 210Pb excess, 7Be and 137Cs in selected grass covered soils in Southeast Queensland, Australia.

Net accumulated areal activity densities and profiles of (210)Pb(ex), (7)Be and (137)Cs in the surface 10 cm of the soil are reported for eight sites in Southeast Queensland, Australia. Areal activity densities of (210)Pb(ex) and (7)Be varied from 1,080 to 4,100 Bqm(-2) and from 176 to 778 Bqm(-2), respectively. A significant (p < 0.001) portion of the variance (R(2) > 0.99) in their vertical distributions was explained by depth in the profile using an exponential function. Around 85% of accumulated (210)Pb(ex) was present in the surface 10 cm of the soil. Beryllium-7 was mainly confined to the grass and surface 2 cm of the soil. Average penetration half-depths of 3.6 +/- 0.2 and 0.3 +/- 0.1cm were determined for (210)Pb(ex) and (7)Be, respectively. Areal activity densities of global fallout (137)Cs varied from 10 to 361 Bqm(-2). Its signal was well mixed within the surface 10 cm. Comparison of the measured (137)Cs values to the estimated input value for the region ( approximately 490 Bqm(-2)) and profiling of a 1m deep soil core suggests a vertical migration of (137)Cs over the past decades. The paleo-radon activity flux determined from the (210)Pb(ex) areal activity density (5.1 +/- 0.9 mBqm(-2) s(-1)) was not statistically different to that measured using activated charcoal cups (5.5 +/- 0.4 mBqm(-2) s(-1)), tending to suggest that Southeast Queensland is neither a net source nor a net sink of (210)Pb-bearing aerosols.