3D-printed wound dressing platform for protein administration based on alginate and zinc oxide tetrapods.

Wound treatment requires a plethora of independent properties. Hydration, anti-bacterial properties, oxygenation and patient-specific drug delivery all contribute to the best possible wound healing. Three-dimensional (3D) printing has emerged as a set of techniques to realize individually adapted wound dressings with open porous structure from biomedically optimized materials. To include all the desired properties into the so-called bioinks is still challenging. In this work, a bioink system based on anti-bacterial zinc oxide tetrapods (t-ZnO) and biocompatible sodium alginate is presented. Additive manufacturing of these hydrogels with high t-ZnO content (up to 15 wt.%) could be realized. Additionally, protein adsorption on the t-ZnO particles was evaluated to test their suitability as carriers for active pharmaceutical ingredients (APIs). Open porous and closed cell printed wound dressings were tested for their cell and skin compatibility and anti-bacterial properties. In these categories, the open porous constructs exhibited protruding t-ZnO arms and proved to be anti-bacterial. Dermatological tests on ex vivo skin showed no negative influence of the alginate wound dressing on the skin, making this bioink an ideal carrier and evaluation platform for APIs in wound treatment and healing.

Reconstituted dry powder formulations of ZnO-adjuvanted ovalbumin induce equivalent antigen specific antibodies but lower T cell responses than ovalbumin adjuvanted with Alhydrogel® or cationic adjuvant formulation 01 (CAF®01).

Most licensed human vaccines are based on liquid dosage forms but have poor storage stability and require continuous and expensive cold-chain storage. In contrast, the use of solid vaccine dosage forms produced by for example spray drying, extends shelf life and eliminates the need for a cold chain. Zinc oxide (ZnO)-based nanoparticles display immunomodulatory properties, but their adjuvant effect as a dry powder formulation is unknown. Here, we show that reconstituted dry powder formulations of ZnO particles containing the model antigen ovalbumin (OVA) induce antigen-specific CD8+ T-cell and humoral responses. By systematically varying the ratio between ZnO and mannitol during spray drying, we manufactured dry powder formulations of OVA-containing ZnO particles that displayed: (i) a spherical or wrinkled surface morphology, (ii) an aerodynamic diameter and particle size distribution optimal for deep lung deposition, and (iii) aerosolization properties suitable for lung delivery. Reconstituted dry powder formulations of ZnO particles were well-tolerated by Calu-3 lung epithelial cells. Furthermore, almost equivalent OVA-specific serum antibody responses were stimulated by reconstituted ZnO particles, OVA adjuvanted with Alhydrogel®, and OVA adjuvanted with the cationic adjuvant formulation 01 (CAF®01). However, reconstituted dry powder ZnO particles and OVA adjuvanted with Alhydrogel® induced significantly lower OVA-specific CD8+CD44+ T-cell responses in the spleen than OVA adjuvanted with CAF®01. Similarly, reconstituted dry powder ZnO particles activated significantly lower percentages of follicular helper T cells and germinal center B cells in the draining lymph nodes than OVA adjuvanted with CAF®01. Overall, our results show that reconstituted dry powder formulations of ZnO nanoparticles can induce antigen-specific antibodies and can be used in vaccines to enhance antigen-specific humoral immune responses against subunit protein antigens.

Lipobiotin-capture magnetic bead assay for isolation, enrichment and detection of Mycobacterium tuberculosis from saliva.

BACKGROUND: Pulmonary Tuberculosis (TB) is diagnosed through sputum samples. As sputum sampling is challenging in children and cachexic patients, the development of diagnostic tests using saliva appears promising but has been discouraged due to low bacterial load and poor sensitivity. Here, we present a novel and rapid method to enrich Mycobacterium tuberculosis (Mtb) from saliva, which may serve as a basis for a diagnostic saliva test. METHODS: Lipobiotin-functionalized magnetic beads (LMBs) were incubated with Mtb-spiked PBS and saliva from healthy donors as well as with saliva from TB patients. Flow cytometry was used to evaluate the capacity of the beads to bind Mtb, while real-time quantitative polymerase chain reaction (qPCR) was utilized to detect Mtb and determine the amount of mycobacterial DNA in different sample types. RESULTS: We found that LMBs bind Mtb efficiently when compared to non-functionalized beads. The development of an qPCR assay based on the use of LMBs (LMB assay) allowed us to enrich mycobacterial DNA in spiked sample types, including PBS and saliva from healthy donors (enrichment of up to ~8.7 fold). In Mtb-spiked saliva samples, we found that the LMB assay improved the detection rate of 102 bacteria in a volume of 5 ml from 0 out of 15 (0%) to 6 out of 15 (40%). Consistent with that, the LMB assay increased the rate of correctly identified saliva samples from TB patients in two independent cohorts. CONCLUSIONS: Implementation of the principle of the LMB-based assay may improve the sensitivity of existing diagnostic techniques, e.g. by functionalizing materials that facilitate Mtb sampling from the oral cavity.

A consensus research agenda for optimising nasal drug delivery.

Nasal drug delivery has specific challenges which are distinct from oral inhalation, alongside which it is often considered. The next generation of nasal products will be required to deliver new classes of molecule, e.g. vaccines, biologics and drugs with action in the brain or sinuses, to local and systemic therapeutic targets. Innovations and new tools/knowledge are required to design products to deliver these therapeutic agents to the right target at the right time in the right patients. We report the outcomes of an expert meeting convened to consider gaps in knowledge and unmet research needs in terms of (i) formulation and devices, (ii) meaningful product characterization and modeling, (iii) opportunities to modify absorption and clearance. Important research questions were identified in the areas of device and formulation innovation, critical quality attributes for different nasal products, development of nasal casts for drug deposition studies, improved experimental models, the use of simulations and nasal delivery in special populations. We offer these questions as a stimulus to research and suggest that they might be addressed most effectively by collaborative research endeavors.

Mucoadhesive buccal films based on a graft co-polymer - A mucin-retentive hydrogel scaffold.

From a patient-centric perspective, oromucosal drug delivery is highly attractive due to the ease of administration without the need of swallowing, and improved patient safety. The aim of the presented work was to prepare a buccal film using a self-forming micellar drug solubiliser as the film matrix, combining it with a mucoadhesive polymer for an enhanced retention on the buccal mucosa. Specifically, we propose the use of a graft co-polymer (Soluplus®), as a solubiliser and film former, supplemented with polymers with more hydrophilic properties and known mucoadhesive properties; hydroxypropyl methylcellulose (HPMC) or modified hydroxypropyl pea starch (Lycoat®). The film was manufactured by the solvent casting method. The resulting dual polymer film containing HPMC exhibited resistance to erosion and mucoadhesive properties superior to the control films of single polymers. In an in vitro oral cavity model, these properties were shown to correlate with increased residence time on simulated oral mucosa. Furthermore, all films containing the graft co-polymer showed similar permeability characteristics of furosemide towards buccal TR146 epithelial cells. This work illustrated that it is possible to manufacture dry, solid, dual polymer films containing an advanced drug delivery system with a cheap and simple method. The combination of a graft co-polymer with a mucoadhesive polymer transform into drug solubilising micelles in a mucin-retentive hydrogel scaffold with longer retention time on buccal mucosa for safe and enhanced advanced formulation.

Mucosal Vaccination via the Respiratory Tract.

Vaccine delivery via mucosal surfaces is an interesting alternative to parenteral vaccine administration, as it avoids the use of a needle and syringe. Mucosal vaccine administration also targets the mucosal immune system, which is the largest lymphoid tissue in the human body. The mucosal immune response involves systemic, antigen-specific humoral and cellular immune response in addition to a local response which is characterised by a predominantly cytotoxic T cell response in combination with secreted IgA. This antibody facilitates pathogen recognition and deletion prior to entrance into the body. Hence, administration via the respiratory mucosa can be favoured for all pathogens which use the respiratory tract as entry to the body, such as influenza and for all diseases directly affecting the respiratory tract such as pneumonia. Additionally, the different mucosal tissues of the human body are interconnected via the so-called "common mucosal immune system", which allows induction of an antigen-specific immune response in distant mucosal sites. Finally, mucosal administration is also interesting in the area of therapeutic vaccination, in which a predominant cellular immune response is required, as this can efficiently be induced by this route of delivery. The review gives an introduction to respiratory vaccination, formulation approaches and application strategies.