RESUMEN
We updated the chemical mechanism of the GEOS-Chem global 3-D model of atmospheric chemistry to include new recommendations from the NASA Jet Propulsion Laboratory (JPL) chemical kinetics Data Evaluation 19-5 and from the International Union of Pure and Applied Chemistry (IUPAC) and to balance carbon and nitrogen. We examined the impact of these updates on the GEOS-Chem version 14.0.1 simulation. Notable changes include 11 updates to reactions of reactive nitrogen species, resulting in a 7% net increase in the stratospheric NOx (NO + NO2) burden; an updated CO + OH rate formula leading to a 2.7% reduction in total tropospheric CO; adjustments to the rate coefficient and branching ratios of propane + OH, leading to reduced tropospheric propane (-17%) and increased acetone (+3.5%) burdens; a 41% increase in the tropospheric burden of peroxyacetic acid due to a decrease in the rate coefficient for its reaction with OH, further contributing to reductions in peroxyacetyl nitrate (PAN; -3.8%) and acetic acid (-3.4%); and a number of minor adjustments to halogen radical cycling. Changes to the global tropospheric burdens of other species include -0.7% for ozone, +0.3% for OH (-0.4% for methane lifetime against oxidation by tropospheric OH), +0.8% for formaldehyde, and -1.7% for NOx. The updated mechanism reflects the current state of the science, including complex chemical dependencies of key atmospheric species on temperature, pressure, and concentrations of other compounds. The improved conservation of carbon and nitrogen will facilitate future studies of their overall atmospheric budgets.
RESUMEN
Despite improvements in ambient air quality in the US in recent decades, many people still experience unhealthy levels of pollution. At present, national-level alert-day identification relies predominately on surface monitor networks and forecasters. Satellite-based estimates of surface air quality have rapidly advanced and have the capability to inform exposure-reducing actions to protect public health. At present, we lack a robust framework to quantify public health benefits of these advances in applications of satellite-based atmospheric composition data. Here, we assess possible health benefits of using geostationary satellite data, over polar orbiting satellite data, for identifying particulate air quality alert days (24hr PM2.5 > 35 µg m-3) in 2020. We find the more extensive spatiotemporal coverage of geostationary satellite data leads to a 60% increase in identification of person-alerts (alert days × population) in 2020 over polar-orbiting satellite data. We apply pre-existing estimates of PM2.5 exposure reduction by individual behavior modification and find these additional person-alerts may lead to 1,200 (800-1,500) or 54% more averted PM2.5-attributable premature deaths per year, if geostationary, instead of polar orbiting, satellite data alone are used to identify alert days. These health benefits have an associated economic value of 13 (8.8-17) billion dollars ($2019) per year. Our results highlight one of many potential applications of atmospheric composition data from geostationary satellites for improving public health. Identifying these applications has important implications for guiding use of current satellite data and planning future geostationary satellite missions.
RESUMEN
We use the Community Multiscale Air Quality (CMAQv5.4) model to examine the potential impact of particulate nitrate (pNO3-) photolysis on air quality over the Northern Hemisphere. We estimate the photolysis frequency of pNO3- by scaling the photolysis frequency of nitric acid (HNO3) with an enhancement factor that varies between 10 and 100 depending on pNO3- and sea-salt aerosol concentrations and then perform CMAQ simulations without and with pNO3- photolysis to quantify the range of impacts on tropospheric composition. The photolysis of pNO3- produces gaseous nitrous acid (HONO) and nitrogen dioxide (NO2) over seawater thereby increasing atmospheric HONO and NO2 mixing ratios. HONO subsequently undergoes photolysis, producing hydroxyl radicals (OH). The increase in NO2 and OH alters atmospheric chemistry and enhances the atmospheric ozone (O3) mixing ratio over seawater, which is subsequently transported to downwind continental regions. Seasonal mean model O3 vertical column densities without pNO3- photolysis are lower than the Ozone Monitoring Instrument (OMI) retrievals, while the column densities with the pNO3- photolysis agree better with the OMI retrievals of tropospheric O3 burden. We compare model O3 mixing ratios with available surface observed data from the U.S., Japan, the Tropospheric Ozone Assessment Report - Phase II, and OpenAQ; and find that the model without pNO3- photolysis underestimates the observed data in winter and spring seasons and the model with pNO3- photolysis improves the comparison in both seasons, largely rectifying the pronounced underestimation in spring. Compared to measurements from the western U.S., model O3 mixing ratios with pNO3- photolysis agree better with observed data in all months due to the persistent underestimation of O3 without pNO3- photolysis. Compared to the ozonesonde measurements, model O3 mixing ratios with pNO3- photolysis also agree better with observed data than the model O3 without pNO3- photolysis.
RESUMEN
In the United States (U.S.), studies on nitrogen dioxide (NO2) trends and pollution-attributable health effects have historically used measurements from in situ monitors, which have limited geographical coverage and leave 66% of urban areas unmonitored. Novel tools, including remotely sensed NO2 measurements and estimates of NO2 estimates from land-use regression and photochemical models, can aid in assessing NO2 exposure gradients, leveraging their complete spatial coverage. Using these data sets, we find that Black, Hispanic, Asian, and multiracial populations experience NO2 levels 15-50% higher than the national average in 2019, whereas the non-Hispanic White population is consistently exposed to levels that are 5-15% lower than the national average. By contrast, the in situ monitoring network indicates more moderate ethnoracial NO2 disparities and different rankings of the least- to most-exposed ethnoracial population subgroup. Validating these spatially complete data sets against in situ observations reveals similar performance, indicating that all these data sets can be used to understand spatial variations in NO2. Integrating in situ monitoring, satellite data, statistical models, and photochemical models can provide a semiobservational record, complete geospatial coverage, and increasingly high spatial resolution, enhancing future efforts to characterize, map, and track exposure and inequality for highly spatially heterogeneous pollutants like NO2.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Estados Unidos , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Dióxido de Nitrógeno/análisis , Monitoreo del Ambiente , Exposición a Riesgos Ambientales , Material Particulado/análisisRESUMEN
Atmospheric methane directly affects surface temperatures and indirectly affects ozone, impacting human welfare, the economy, and environment. The social cost of methane (SC-CH4) metric estimates the costs associated with an additional marginal metric ton of emissions. Current SC-CH4 estimates do not consider the indirect impacts associated with ozone production from changes in methane. We use global model simulations and a new BenMAP webtool to estimate respiratory-related deaths associated with increases in ozone from a pulse of methane emissions in 2020. By using an approach consistent with the current SC-CH4 framework, we monetize and discount annual damages back to present day values. We estimate that the methane-ozone mechanism is attributable to 760 (95% CI: 330-1200) respiratory-related deaths per million metric tons of methane globally, for a global net present damage of $1800/mT (95% CI: $760-$2800/Mt CH4; 2% Ramsey discount rate); this would double the current SC-CH4 if included. These physical impacts are consistent with recent studies, but comparing direct costs is challenging. Economic damages are sensitive to uncertainties in the exposure and health risks associated with tropospheric ozone, assumptions about future projections of NOx emissions, socioeconomic conditions, and mortality rates, monetization parameters, and other factors. Our estimates are highly sensitive to uncertainties in ozone health risks. We also develop a reduced form model to test sensitivities to other parameters. The reduced form tool runs with a user-supplied emissions pulse, as well as socioeconomic and precursor projections, enabling future integration of the methane-ozone mechanism into the SC-CH4 modeling framework.
RESUMEN
We analyze hourly PM2.5 (particles with an aerodynamic diameter of ≤ 2.5 µm) concentrations measured at the U.S. Embassy in Dhaka over the 2016 - 2021 time period and find that concentrations are seasonally dependent with the highest occurring in winter and the lowest in monsoon seasons. Mean winter PM2.5 concentrations reached ~165-175 µg/m3 while monsoon concentrations remained ~30-35 µg/m3. Annual mean PM2.5 concentration reached ~5-6 times greater than the Bangladesh annual PM2.5 standard of 15 µg/m3. The number of days exceeding the daily PM2.5 standard of 65 µg/m3 in a year approached nearly 50%. Daily-mean PM2.5 concentrations remained elevated (>65 µg/m3) for more than 80 consecutive days. Night-time concentrations were greater than daytime concentrations. The comparison of results obtained from the Community Multiscale Air Quality (CMAQ) model simulations over the Northern Hemisphere using 108-km horizontal grids with observed data suggests that the model can reproduce the seasonal variation of observed data but underpredicts observed PM2.5 in winter months with a normalized mean bias of 13-32%. In the model, organic aerosol is the largest component of PM2.5, of which secondary organic aerosol plays a dominant role. Transboundary pollution has a large impact on the PM2.5 concentration in Dhaka, with an annual mean contribution of ~40 µg/m3.
RESUMEN
We examine the impact of dimethylsulfide (DMS) emissions on sulfate concentrations over the continental U.S. by using the Community Multiscale Air Quality (CMAQ) model version 5.4 and performing annual simulations without and with DMS emissions for 2018. DMS emissions enhance sulfate not only over seawater but also over land, although to a lesser extent. On an annual basis, the inclusion of DMS emissions increase sulfate concentrations by 36% over seawater and 9% over land. The largest impacts over land occur in California, Oregon, Washington, and Florida, where the annual mean sulfate concentrations increase by ~25%. The increase in sulfate causes a decrease in nitrate concentration due to limited ammonia concentration especially over seawater and an increase in ammonium concentration with a net effect of increased inorganic particles. The largest sulfate enhancement occurs near the surface (over seawater) and the enhancement decreases with altitude, diminishing to 10-20% at an altitude of ~5 km. Seasonally, the largest enhancement of sulfate over seawater occurs in summer, and the lowest in winter. In contrast, the largest enhancements over land occur in spring and fall due to higher wind speeds that can transport more sulfate from seawater into land.
RESUMEN
The United States Environmental Protection Agency (US EPA) has developed a set of annual North American emissions data for multiple air pollutants across 18 broad source categories for 2002 through 2017. The sixteen new annual emissions inventories were developed using consistent input data and methods across all years. When a consistent method or tool was not available for a source category, emissions were estimated by scaling data from the EPA's 2017 National Emissions Inventory with scaling factors based on activity data and/or emissions control information. The emissions datasets are designed to support regional air quality modeling for a wide variety of human health and ecological applications. The data were developed to support simulations of the EPA's Community Multiscale Air Quality model but can also be used by other regional scale air quality models. The emissions data are one component of EPA's Air Quality Time Series Project which also includes air quality modeling inputs (meteorology, initial conditions, boundary conditions) and outputs (e.g., ozone, PM2.5 and constituent species, wet and dry deposition) for the Conterminous US at a 12 km horizontal grid spacing.
RESUMEN
Several locations across the United States in non-compliance with the national standard for ground-level ozone (O3) are thought to have sizeable influences from distant extra-regional emission sources or natural stratospheric O3, which complicates design of local emission control measures. To quantify the amount of long-range transported O3 (LRT O3), its origin, and change over time, we conduct and analyze detailed sensitivity calculations characterizing the response of O3 to emissions from different source regions across the Northern Hemisphere in conjunction with multi-decadal simulations of tropospheric O3 distributions and changes. Model calculations show that the amount of O3 at any location attributable to sources outside North America varies both spatially and seasonally. On a seasonal-mean basis, during 1990-2010, LRT O3 attributable to international sources steadily increased by 0.06-0.2 ppb yr-1 at locations across the United States and arose from superposition of unequal and contrasting trends in individual source-region contributions, which help inform attribution of the trend evident in O3 measurements. Contributions of emissions from Europe steadily declined through 2010, while those from Asian emissions increased and remained dominant. Steadily rising NOx emissions from international shipping resulted in increasing contributions to LRT O3, comparable to those from Asian emissions in recent years. Central American emissions contribute a significant fraction of LRT O3 in southwestern United States. In addition to the LRT O3 attributable to emissions outside of North America, background O3 across the continental United States is comprised of a sizeable and spatially variable fraction that is of stratospheric origin (29-78%).
RESUMEN
In Latin America, atmospheric deposition is a major vector of nitrogen (N) input to urban systems. Yet, measurements of N deposition are sparse, precluding analysis of spatial patterns, temporal trends, and ecosystem impacts. Chemical transport models can be used to fill these gaps in the absence of dense measurements. Here, we evaluate the performance of a global 3-D chemical transport model in simulating spatial and interannual variation in wet inorganic N (NH4-N + NO3-N) deposition across urban areas in Latin America. Monthly wet and dry inorganic N deposition to Latin America were simulated for the period 2006-2010 using the GEOS-Chem Chemical Transport Model. Published estimates of observed wet or bulk inorganic N deposition measured between 2006-2010 were compiled for 16 urban areas and then compared with model output from GEOS-Chem. Observed mean annual inorganic N deposition to the urban study sites ranged from 5.7-14.2 kg ha-1 yr-1, with NH4-N comprising 48-90% of the total. Results show that simulated N deposition was highly correlated with observed N deposition across sites (R2 = 0.83, NMB = -50%). However, GEOS-Chem generally underestimated N deposition to urban areas in Latin America compared to observations. Underestimation due to bulk sampler dry deposition artifacts was considered and improved bias without improving correlation. In contrast to spatial variation, the model did not capture year-to-year variation well. Discrepancies between modeled and observed values exist, in part, because of uncertainties in Latin American N emissions inventories. Our findings indicate that even at coarse spatial resolution, GEOS-Chem can be used to simulate N deposition to urban Latin America, improving understanding of regional deposition patterns and potential ecological effects.
RESUMEN
Gaseous and particulate chlorine species play an important role in modulating tropospheric oxidation capacity, aerosol water uptake, visibility degradation, and human health. The lack of recent global continental chlorine emissions has hindered modeling studies of the role of chlorine in the atmosphere. Here, we develop a comprehensive global emission inventory of gaseous HCl and particulate Cl- (pCl), including 35 sources categorized in six source sectors based on published up-to-date activity data and emission factors. These emissions are gridded at a spatial resolution of 0.1° × 0.1° for the years 1960 to 2014. The estimated emissions of HCl and pCl in 2014 are 2354 (1661-3201) and 2321 (930-3264) Gg Cl a-1, respectively. Emissions of HCl are mostly from open waste burning (38%), open biomass burning (19%), energy (19%), and residential (13%) sectors, and the major sources classified by fuel type are combustion of waste (43%), biomass (32%), and coal (25%). Emissions of pCl are mostly from biofuel (29%) and open biomass burning processes (44%). The sectoral and spatial distributions of HCl and pCl emissions are very heterogeneous along the study period, and the temporal trends are mainly driven by the changes in emission factors, energy intensity, economy, and population.
Asunto(s)
Contaminantes Atmosféricos , Aerosoles/análisis , Contaminantes Atmosféricos/análisis , Biomasa , Cloruros , Carbón Mineral , Monitoreo del Ambiente , Humanos , Ácido Clorhídrico , Material Particulado/análisisRESUMEN
The mass concentration of fine particulate matter (PM2.5; diameters less than 2.5 µm) estimated from geostationary satellite aerosol optical depth (AOD) data can supplement the network of ground monitors with high temporal (hourly) resolution. Estimates of PM2.5 over the United States (US) were derived from NOAA's operational geostationary satellites Advanced Baseline Imager (ABI) AOD data using a geographically weighted regression with hourly and daily temporal resolution. Validation versus ground observations shows a mean bias of -21.4% and -15.3% for hourly and daily PM2.5 estimates, respectively, for concentrations ranging from 0 to 1000 µg/m3. Because satellites only observe AOD in the daytime, the relation between observed daytime PM2.5 and daily mean PM2.5 was evaluated using ground measurements; PM2.5 estimated from ABI AODs were also examined to study this relationship. The ground measurements show that daytime mean PM2.5 has good correlation (r > 0.8) with daily mean PM2.5 in most areas of the US, but with pronounced differences in the western US due to temporal variations caused by wildfire smoke; the relation between the daytime and daily PM2.5 estimated from the ABI AODs has a similar pattern. While daily or daytime estimated PM2.5 provides exposure information in the context of the PM2.5 standard (> 35 µg/m3), the hourly estimates of PM2.5 used in Nowcasting show promise for alerts and warnings of harmful air quality. The geostationary satellite based PM2.5 estimates inform the public of harmful air quality ten times more than standard ground observations (1.8 vs. 0.17 million people per hour).
RESUMEN
US background (US-B) ozone (O3) is the O3 that would be present in the absence of US anthropogenic (US-A) emissions. US-B O3 varies by location and season and can make up a large, sometimes dominant, portion of total O3. Typically, US-B O3 is quantified using a chemical transport model (CTM) though results are uncertain due to potential errors in model process descriptions and inputs, and there are significant differences in various model estimates of US-B O3. We develop and apply a method to fuse observed O3 with US-B O3 simulated by a regional CTM (CMAQ). We apportion the model bias as a function of space and time to US-B and US-A O3. Trends in O3 bias are explored across different simulation years and varying model scales. We found that the CTM US-B O3 estimate was typically biased low in spring and high in fall across years (2016-2017) and model scales. US-A O3 was biased high on average, with bias increasing for coarser resolution simulations. With the application of our data fusion bias adjustment method, we estimate a 28% improvement in the agreement of adjusted US-B O3. Across the four estimates, we found annual mean CTM-simulated US-B O3 ranging from 30 to 37 ppb with the spring mean ranging from 32 to 39 ppb. After applying the bias adjustment, we found annual mean US-B O3 ranging from 32 to 33 ppb with the spring mean ranging from 37 to 39 ppb.
Asunto(s)
Contaminantes Atmosféricos , Ozono , Contaminantes Atmosféricos/análisis , Simulación por Computador , Modelos Químicos , Ozono/análisis , Estaciones del AñoRESUMEN
We implement oceanic dimethylsulfide (DMS) emissions and its atmospheric chemical reactions into the Community Multiscale Air Quality (CMAQv53) model and perform annual simulations without and with DMS chemistry to quantify its impact on tropospheric composition and air quality over the Northern Hemisphere. DMS chemistry enhances both sulfur dioxide (SO2) and sulfate ( S O 4 2 - ) over seawater and coastal areas. It enhances annual mean surface SO2 concentration by +46 pptv and S O 4 2 - by +0.33 µg/m3 and decreases aerosol nitrate concentration by -0.07 µg/m3 over seawater compared to the simulation without DMS chemistry. The changes decrease with altitude and are limited to the lower atmosphere. Impacts of DMS chemistry on S O 4 2 - are largest in the summer and lowest in the fall due to the seasonality of DMS emissions, atmospheric photochemistry and resultant oxidant levels. Hydroxyl and nitrate radical-initiated pathways oxidize 75% of the DMS while halogen-initiated pathways oxidize 25%. DMS chemistry leads to more acidic particles over seawater by decreasing aerosol pH. Increased S O 4 2 - from DMS enhances atmospheric extinction while lower aerosol nitrate reduces the extinction so that the net effect of DMS chemistry on visibility tends to remain unchanged over most of the seawater.
RESUMEN
A newly developed dataset from the Interagency Monitoring of PROtected Visual Environments (IMPROVE) observation network, combined with a 3-D chemical transport model, is used to evaluate the spatial and temporal variability of brown carbon (BrC) in the United States. The model with BrC emitted from biomass burning and biofuel emissions agrees with the seasonal and spatial variability of BrC planetary boundary layer (PBL) absorption aerosol optical depth (AAOD) observations within a factor of 2. The model without whitening, the tendency for absorption to decrease with aerosol aging, overestimates the observed BrC PBL AAOD, and does not reflect the measured BrC PBL AAOD spatial variability. The model shows higher absorption direct radiative effects (DRE) from BrC at northern high latitudes than at mid-latitudes in spring and summer, due to boreal fire emissions, long whitening lifetimes and high surface albedos. These findings highlight the need to study BrC over the Arctic region.
RESUMEN
This study uses Las Vegas near-road measurements of carbon monoxide (CO) and nitrogen oxides (NOx) to test the consistency of onroad emission constraint methodologies. We derive commonly used CO to NOx ratios (ΔCO:ΔNOx) from cross-road gradients and from linear regression using ordinary least squares (OLS) regression and orthogonal regression. The CO to NOx ratios are used to infer NOx emission adjustments for a priori emissions estimates from EPA's MOtor Vehicle Emissions Simulator (MOVES) model assuming unbiased CO. The assumption of unbiased CO emissions may not be appropriate in many circumstances but was implemented in this analysis to illustrate the range of NOx scaling factors that can be inferred based on choice of methods and monitor distance alone. For the nearest road estimates (25m), the cross-road gradient and ordinary least squares (OLS) agree with each other and are not statistically different from the MOVES-based emission estimate while ΔCO:ΔNOx from orthogonal regression is significantly higher than the emitted ratio from MOVES. Using further downwind measurements (i.e., 115m and 300m) increases OLS and orthogonal regression estimates of ΔCO:ΔNOx but not cross-road gradient ΔCO:ΔNOx. The inferred NOx emissions depend on the observation-based method, as well as the distance of the measurements from the roadway and can suggest either that MOVES NOx emissions are unbiased or that they should be adjusted downward by between 10% and 47%. The sensitivity of observation-based ΔCO:ΔNOx estimates to the selected monitor location and to the calculation method characterize the inherent uncertainty of these methods that cannot be derived from traditional standard-error based uncertainty metrics.
RESUMEN
Previous studies have proposed that model performance statistics from earlier photochemical grid model (PGM) applications can be used to benchmark performance in new PGM applications. A challenge in implementing this approach is that limited information is available on consistently calculated model performance statistics that vary spatially and temporally over the U.S. Here, a consistent set of model performance statistics are calculated by year, season, region, and monitoring network for PM2.5 and its major components using simulations from versions 4.7.1-5.2.1 of the Community Multiscale Air Quality (CMAQ) model for years 2007-2015. The multi-year set of statistics is then used to provide quantitative context for model performance results from the 2015 simulation. Model performance for PM2.5 organic carbon in the 2015 simulation ranked high (i.e., favorable performance) in the multi-year dataset, due to factors including recent improvements in biogenic secondary organic aerosol and atmospheric mixing parameterizations in CMAQ. Model performance statistics for the Northwest region in 2015 ranked low (i.e., unfavorable performance) for many species in comparison to the 2007-2015 dataset. This finding motivated additional investigation that suggests a need for improved speciation of wildfire PM2.5emissions and modeling of boundary layer dynamics near water bodies. Several limitations were identified in the approach of benchmarking new model performance results with previous results. Since performance statistics vary widely by region and season, a simple set of national performance benchmarks (e.g., one or two targets per species and statistic) as proposed previously are inadequate to assess model performance throughout the U.S. Also, trends in model performance statistics for sulfate over the 2007 to 2015 period suggest that model performance for earlier years may not be a useful reference for assessing model performance for recent years in some cases. Comparisons of results from the 2015 base case with results from five sensitivity simulations demonstrated the importance of parameterizations of NH3 surface exchange, organic aerosol volatility and production, and emissions of crustal cations for predicting PM2.5 species concentrations.
RESUMEN
Metropolitan areas may suffer with increase of air pollution due to the growth of urbanization, transportation, and industrial sectors. The Metropolitan Area of Vitória (MAV) in Brazil is facing air pollution problems, especially because of the urbanization of past years and of having many industries inside the metropolitan area. Developing air quality system is crucial to understand the air pollution mechanism over these areas. However, having a good input dataset for applying on photochemical models is hard and requires quite of research. One input file for air quality modeling which can play a key role on results is the lateral boundary conditions (LBC). This study aimed to investigate the influence of LBC over CMAQ simulation for particulate matter and ozone over MAV by applying four different methods as LBC during August 2010. The first scenario (M1) is based on a fixed, time-independent boundary conditions with zero concentrations for all pollutants; the second scenario (M2) used a fixed, time-independent concentration values, with average values from local monitoring stations; the third CMAQ nesting scenario (M3) used the nested boundary conditions varying with time from a previous simulation with CMAQ over a larger modeling domain, centered on MAV; and finally, the fourth GEOS-Chem scenario (M4) used the boundary conditions varying with time from simulations of global model GEOS-Chem. All scenarios runs are based on the same meteorology conditions and pollutant emissions. The air quality simulations were made over a domain 61 × 79 km centered on coordinates - 20.25° S, - 40.28° W with a resolution of 1 km. The results were evaluated with the measured data from the local monitoring stations. Overall, significant differences on concentrations and number of chemical species between the LBC scenarios are shown across all LBC scenarios. The M3 and M4 dynamic LBC scenarios showed the best performances over ozone estimates while M1 and M2 had poor performance. Although no LBC scenarios do not seem to have a great influence on total PM10 and PM2.5 concentrations, individual PM2.5 species like Na, NO3-, and NH4+concentrations are influenced by the dynamic LBC approach, since those hourly individual PM2.5 species from CMAQ nesting approach (M3) and GEOS-Chem model (M4) were used as an input to LBC.
Asunto(s)
Contaminación del Aire/análisis , Modelos Teóricos , Ozono/análisis , Contaminantes Atmosféricos/análisis , Brasil , Ciudades , Monitoreo del Ambiente/métodos , Desarrollo Industrial , Meteorología/métodos , Material Particulado/análisis , Procesos FotoquímicosRESUMEN
Trace metal distributions are of relevance to understand sources of fine particulate matter (PM2.5), PM2.5-related health effects, and atmospheric chemistry. However, knowledge of trace metal distributions is lacking due to limited ground-based measurements and model simulations. This study develops a simulation of 12 trace metal concentrations (Si, Ca, Al, Fe, Ti, Mn, K, Mg, As, Cd, Ni and Pb) over continental North America for 2013 using the GEOS-Chem chemical transport model. Evaluation of modeled trace metal concentrations with observations indicates a spatial consistency within a factor of 2, an improvement over previous studies that were within a factor of 3-6. The spatial distribution of trace metal concentrations reflects their primary emission sources. Crustal element (Si, Ca, Al, Fe, Ti, Mn, K) concentrations are enhanced over the central US from anthropogenic fugitive dust and over the southwestern U.S. due to natural mineral dust. Heavy metal (As, Cd, Ni and Pb) concentrations are high over the eastern U.S. from industry. K is abundance in the southeast from biomass burning and high concentrations of Mg is observed along the coast from sea spray. The spatial pattern of PM2.5 mass is most strongly correlated with Pb, Ni, As and K due to their signature emission sources. Challenges remain in accurately simulating observed trace metal concentrations. Halving anthropogenic fugitive dust emissions in the 2011 National Air Toxic Assessment (NATA) inventory and doubling natural dust emissions in the default GEOS-Chem simulation was necessary to reduce biases in crustal element concentrations. A fivefold increase of anthropogenic emissions of As and Pb was necessary in the NATA inventory to reduce the national-scale bias versus observations by more than 80 %, potentially reflecting missing sources.
RESUMEN
Ozone (O3) is a key air pollutant that is produced from precursor emissions and has adverse impacts on human health and ecosystems. In the U.S., the Clean Air Act (CAA) regulates O3 levels to protect public health and welfare, but unraveling the origins of surface O3 is complicated by the presence of contributions from multiple sources including background sources like stratospheric transport, wildfies, biogenic precursors, and international anthropogenic pollution, in addition to U.S. anthropogenic sources. In this report, we consider more than 100 published studies and assess current knowledge on the spatial and temporal distribution, trends, and sources of background O3 over the continental U.S., and evaluate how it inflattainment of the air quality standards. We conclude that spring and summer seasonal mean U.S. background O3 (USB O3), or O3 formed from natural sources plus anthropogenic sources in countries outside the U.S., is greatest at high elevation locations in the western U.S., with monthly mean maximum daily 8-hour average (MDA8) mole fractions approaching 50 parts per billion (ppb) and annual 4th highest MDA8s exceeding 60 ppb, at some locations. At lower elevation sites, e.g., along the West and East Coasts, seasonal mean MDA8 USB O3 is in the range of 20-40 ppb, with generally smaller contributions on the highest O3 days. The uncertainty in U.S. background O3 is around ±10 ppb for seasonal mean values and higher for individual days. Noncontrollable O3 sources, such as stratospheric intrusions or precursors from wildfires, can make significant contributions to O3 on some days, but it is challenging to quantify accurately these contributions. We recommend enhanced routine observations, focused fi studies, process-oriented modeling studies, and greater emphasis on the complex photochemistry in smoke plumes as key steps to reduce the uncertainty associated with background O3 in the U.S.