Understanding Excipient-Induced Crystallization of Spray-Dried Amorphous Solid Dispersion.

This study investigates the compatibility of excipients with the model system SDI-X and their role in the induced crystallization of the amorphous compound-X in tablet formulations. We aimed to establish a straightforward and practical screening approach for evaluating excipient-induced crystallization of SDI in tablet matrices. Three methodologies-binary powder mixture, binary compact, and bilayer tablets-were employed to qualitatively and quantitatively evaluate the recrystallization of SDI-X with various excipients under accelerated storage conditions. The results demonstrated that binary compacts, providing direct physical contact between SDI-X and excipients, are superior in reflecting realistic drug-excipient contact within pharmaceutical tablets, enabling a more accurate assessment of excipient-induced crystallization for SDI-X. In contrast, the broadly used conventional binary blends can significantly underestimate this risk due to insufficient proximity. In addition, the bilayer tablets further confirmed that crystallization initiates at the contact surface between SDI-X and the excipients. The study highlighted that not only hygroscopicity but also the type of excipient and its physical contact with SDI-X significantly influence the recrystallization extent and rate of SDI-X. Interestingly, less hygroscopic diluents such as mannitol and lactose induced much higher levels of crystallization of SDIs, contrary to expectations based on moisture content alone. This suggests that the excipient type and contact surface are more critical in inducing recrystallization than just the level of moisture. The findings emphasize the need for careful excipient selection, study design, and sample preparation to enable appropriate assessments of SDI-excipient compatibility.

The Use of Systemically Absorbed Drugs to Explore An In Vitro Bioequivalence Approach For Comparing Non-Systemically Absorbed Active Pharmaceutical Ingredients in Drug Products For Use in Dogs.

PURPOSE: Currently, for veterinary oral formulations containing one or more active pharmaceutical ingredient (API) that are not systemically absorbed and act locally within the gastrointestinal (GI) tract, the use of terminal clinical endpoint bioequivalence (BE) studies is the only option for evaluating product BE. This investigation explored the use of a totality of evidence approach as an alternative to these terminal studies. METHODS: Three formulations of tablets containing ivermectin plus praziquantel were manufactured to exhibit distinctly different in vitro release characteristics. Because these APIs are highly permeable, plasma drug concentrations served as a biomarker of in vivo dissolution. Tablets were administered to 27 healthy Beagle dogs (3-way crossover) and the rate and extent of exposure of each API for each formulation was compared in a pairwise manner. These results were compared to product relative in vitro dissolution profiles in 3 media. In vivo and in vitro BE predictions were compared. RESULTS: In vivo/in vitro inconsistencies in product relative performance were observed with both compounds when considering product performance across the 3 dissolution media. Formulation comparisons flagged major differences that could explain this outcome. CONCLUSIONS: The finding of an inconsistent in vivo/in vitro relationship confirmed that in vitro dissolution alone cannot assure product BE for veterinary locally acting GI products. However, when combined with a comparison of product composition and manufacturing method, this totality of evidence approach can successfully alert scientists to potential therapeutic inequivalence, thereby supporting FDA's efforts to Replace, Reduce, and/or Refine terminal animal studies.

TOWARD CONTROLLED-RELEASE DRUG DELIVERY MICROCARRIERS ENABLED BY DIRECT LASER WRITING 3D PRINTING.

Controlled-release, and especially long-acting, drug delivery systems hold promise for improving treatments for numerous medical conditions. Previously, we reported an additive manufacturing or "three-dimensional (3D) printing" approach for fabricating liquid-core-shell-cap microcarriers comprising standard photoresists. Here we explore the potential to extend this strategy to achieve microcarriers comprising biodegradable materials as a new pathway to controlled-release drug delivery options. Specifically, we investigate the use of "Two-Photon Direct Laser Writing (DLW)" as a means to 3D print microcarriers composed of: (i) a bottle-shaped "shell" with an orifice, (ii) an aqueous liquid "core", and (iii) a biodegradable "cap". The cap, which is DLW-printed directly onto the shell's orifice, is designed to degrade over time in the body-e.g., with degradation time proportional to cap thickness-to ultimately facilitate release of the liquid core at desired time points. Fabrication results based on the use of a biodegradable poly(ethylene glycol) diacrylate (PEGDA) photomaterial for the cap revealed that shell designs incorporating microfluidic obstruction structures appeared to limit undesired entry of the liquid-phase PEGDA into the shell (i.e., directly preceding cap printing), thereby resulting in improved retention of the liquid core after completion of the cap printing process. These results mark an important first step toward evaluating the utility of the presented DLW 3D printing strategy for possible drug delivery applications.

The impact of diluents on the compaction, dissolution, and physical stability of amorphous solid dispersion tablets.

Amorphous solid dispersion (ASD) is an effective approach for enhancing the solubility, dissolution, and bioavailability of poorly water-soluble drugs. However, these metastable forms can transform into more thermodynamically stable but less soluble crystalline forms. Despite this challenge, research on processing ASDs into solid dosage forms, such as tablets, is lacking. This work aims to fill this gap by investigating the impact of common diluents on the tableting behavior, dissolution, and physical stability of ASDs composed of itraconazole and hypromellose acetate succinate. Four widely used diluents found in commercially available ASD tablets were selected for the study: microcrystalline cellulose (MCC), anhydrous lactose, starch, and mannitol. The performance of ASD tablets varied significantly depending on the diluent used. Tablets prepared with MCC exhibited higher mechanical strength than those formulated using other diluents. ASD tablets containing mannitol and lactose revealed a faster release rate than those composed of MCC or starch. Notably, the study highlighted that the physical stability of ASDs within a tablet is not solely dependent on the amount of sorbed water; crystalline diluents like lactose and mannitol were found to facilitate ASD recrystallization within a tablet. In summary, the study underscores the importance of excipient selection, considering factors such as mechanical strength, dissolution rate, and physical stability of ASD tablets. These findings offer valuable insights into the selection of excipients for downstream ASD tablet development, leading to improved manufacturability, physical stability, and the overall quality of ASD drug products.

Comprehensive evaluation of polymer types and ratios in Spray-Dried Dispersions: Compaction, Dissolution, and physical stability.

Amorphous solid dispersion (ASD) is a well-established strategy for enhancing the solubility and bioavailability of poorly soluble drugs. A significant portion of ASD products are in tablet form. However, the influence of common polymers and drug loading on the manufacturability of ASD tablets remains underexplored. This study focuses on investigating spray-dried ASDs from a tableting perspective by evaluating their physiochemical and mechanical properties. Itraconazole (ITZ) and indomethacin (IND), at the drug loadings ranging from 10% to 50%, were prepared with two polymers, hydroxypropyl methylcellulose acetate succinate (HPMCAS) and polyvinylpyrrolidone (PVP), serving as representative systems. Our findings revealed that increasing the drug loading resulted in a decreased surface area in ITZ-HPMCAS, IND-HPMCAS, and IND-PVP ASDs. However, this trend was not observed in ITZ-PVP dispersions, possibly due to the morphological disparities. Compaction results demonstrated that tabletability improved with decreasing drug loadings, except for ITZ-PVP dispersions. A partial least square analysis underscored particle surface area as the key factor influencing the tensile strength of ASD tablets. Additionally, our study disclosed that ITZ-PVP ASDs exhibited the worst release profiles and stability performance. The comprehensive journey from characterizing ASD particles to analyzing their compaction behavior and investigating drug release and physical stability offered profound insights into the attributes crucial for the downstream processing of amorphous pharmaceuticals.

Development and Validation of a Stability-indicating UPLC-DAD Method for the Simultaneous Determination of Ivermectin and Praziquantel in Pharmaceutical Tablets and Dissolution Media.

Currently, there is no single rapid and accurate stability-indicating quantitative method that can simultaneously determine both ivermectin and praziquantel and their related compounds. Thus, the goal of this research is to develop and validate a new rapid, accurate, and stability-indicating ultra-performance liquid chromatography (UPLC) method. The method uses a water, acetonitrile, and methanol gradient. The chromatographic separation was achieved on a C18 (1.7 µm, 2.1 × 50 mm) column with a flow rate of 0.7 mL/min, and the column temperature was maintained at 40°C. Analytes are detected at 245 nm. The method was validated in accordance with ICH Q2R1 guidelines. The linearity (R2) was >0.9987 and 0.9997 for praziquantel and ivermectin, respectively. The corresponding accuracy ranged between 98.0 and 102.0%. Intermediate precision (assessed as inter-day precision) was determined by calculating the cumulative %CV of eighteen assay preparations and was less than 2.0% for both praziquantel and ivermectin. The specificity of the method was shown by the resolution of the two active pharmaceutical ingredients (APIs) from any interfering excipients, impurities, or degradation products. The limit of detection and quantitation for ivermectin was 26.80 ng/mL and 81.22 ng/mL, respectively. The limit of detection and quantitation for praziquantel was 1.39 µg/mL and 4.22 µg/mL, respectively. The robustness study proved that method performance is stable against small variations in sample processing parameters (shaking, sonication time, and acetonitrile % in solvent solution) and also against small variations in the initial % of mobile phase components and gradient slope. Using ICH Q2R2 criteria, the method was demonstrated to be specific, accurate, stability indicating, and robust to small variations of chromatographic variables.

ART714 is a best-in-class antileukemic 2-carbon-linked dimeric artemisinin derivative.

PURPOSE: It has become increasingly clear that new multiagent combination regimens are required to improve survival rates in acute myeloid leukemia (AML). We recently reported that ART631, a first-in-class 2-carbon-linked artemisinin-derived dimer (2C-ART), was not only efficacious as a component of a novel three-drug combination regimen to treat AML, but, like other synthetic artemisinin derivatives, demonstrated low clinical toxicity. However, we ultimately found ART631 to have suboptimal solubility and stability properties, thus limiting its potential for clinical development. METHODS: We assessed 22 additional 2C-ARTs with documented in vivo antimalarial activity for antileukemic efficacy and physicochemical properties. Our strategy involved culling out 2C-ARTs inferior to ART631 with respect to potency, stability, and solubility in vitro, and then validating in vivo pharmacokinetics, pharmacodynamics, and efficacy of one 2C-ART lead compound. RESULTS: Of the 22 2C-ARTs, ART714 was found to have the most optimal in vitro solubility, stability, and antileukemic efficacy, both alone and in combination with the BCL2 inhibitor venetoclax (VEN) and the kinase inhibitor sorafenib (SOR). ART714 was also highly effective in combination with VEN and the FMS-like tyrosine kinase 3 inhibitor gilteritinib (GILT) against MOLM14 AML xenografts. CONCLUSION: We identified ART714 as our best-in-class antileukemic 2C-ART, based on in vitro potency and pharmacologic properties. We established its in vivo pharmacokinetics and demonstrated its in vitro cooperativity with VEN and SOR and in vivo activities of combinations of ART714, VEN, and GILT. Additional research is indicated to define the optimal niche for the use of ART714 in treatment of AML.

Effectiveness of Conditioned Open-label Placebo With Methadone in Treatment of Opioid Use Disorder: A Randomized Clinical Trial.

Importance: Methadone treatment is the most effective evidence-based treatment for opioid use disorder (OUD), but challenges related to dosing and premature treatment dropout argue for adjunct interventions to improve outcomes. One potential behavioral intervention with low risk involves harnessing placebo effects. Objective: To determine the effect of a pharmacologically conditioned open-label placebo (C-OLP) on 90-day methadone dose, retention, drug use, withdrawal, craving, quality of life, and sleep. Design, Setting, and Participants: This 2-arm, open-label, single-blind randomized clinical trial was conducted between December 5, 2017, and August 2, 2019, in an academically affiliated community opioid treatment program. Analyses were conducted between October 1, 2019, and April 30, 2020. A total of 320 newly enrolled adults seeking treatment for moderate to severe OUD were assessed for study eligibility; 131 met eligibility criteria, provided informed consent, and were randomized to either C-OLP or treatment as usual (TAU) in an unequal-block (3:2) manner. Exclusion criteria were pregnancy, hospital/program transfers, and court-ordered treatment. Interventions: Participants randomized to C-OLP received pharmacologic conditioning and a placebo pill and methadone, and participants randomized to TAU were given methadone only. Participants met with the study team 5 times: at baseline (treatment intake) and 2, 4, 8, and 12 weeks postbaseline. Interactions were balanced between the 2 groups. Main Outcomes and Measures: Outcomes included 90-day methadone dose (primary) and treatment retention, drug use, withdrawal, craving, quality of life, and sleep quality (secondary). Analyses were conducted as intention-to-treat. Results: Of the 131 people enrolled in the study, 54 were randomized to TAU and 77 to C-OLP. Mean (SD) age was 45.9 (11.2) years; most of the participants were Black or African American (83 [63.4%]) and male (84 [64.1%]). No significant group differences were observed in the mean (SD) 90-day methadone dose (83.1 [25.1] mg for group TAU, 79.4 [19.6] mg for group C-OLP; t = 0.621991; P = .43), but the groups differed significantly in their retention rates: 33 (61.1%) for TAU and 60 (77.9%) for C-OLP (χ21 = 4.356; P = .04; number needed to treat for the beneficial outcome of 3-month treatment retention, 6; 95% CI, 4-119). C-OLP participants also reported significantly better sleep quality. Conclusions and Relevance: In this randomized clinical trial, C-OLP had no effect on the primary outcome of 90-day methadone dose. However, C-OLP participants were significantly more likely to remain in treatment. These findings support the use of C-OLP as a methadone treatment adjunct, but larger trials are needed to further examine the use of C-OLP. Trial Registration: ClinicalTrials.gov Identifier: NCT02941809.

Delivery of a therapeutic antibody to the lower gastrointestinal tract for the treatment of Clostridium difficile infection (CDI).

The colonic delivery system of toxin neutralizing antibody is a promising method for treating Clostridium difficile infection (CDI) and has some advantages over the parental administration of a neutralizing antibody. However, colonic delivery of biologics presents several challenges, including instability of biologics during encapsulation into the delivery system and harsh conditions in the upper GI tract. In this work, we described a multi-particulate delivery system encapsulating a tetra-valent antibody ABAB-IgG1 with the potential to treat CDI. This work first approved that the cecum injection of ABAB-IgG1 into the lower GI tract of mice could relieve the symptoms, enhance the clinical score, and improve the survival rate of mice during CDI. Then, the antibody was spray layered onto mannitol beads and then enteric coated with pH-sensitive polymers to achieve colon-targeting release. The in vitro release of antibody from the multi-particulate system and the pH-sensitive release of antibody was monitored. The in vivo efficacy of this system was further examined and confirmed in mice and hamsters. In summary, the findings of this study should provide practical information and potential treatment options for CDI through colonic delivery of antibody therapeutics to the lower GI tract using a multi-particulate delivery system.

FDA/M-CERSI Co-Processed API Workshop Proceedings.

These proceedings contain presentation summaries and discussion highlights from the University of Maryland Center of Excellence in Regulatory Science and Innovation (M-CERSI) Workshop on Co-processed API, held on July 13 and 14, 2022. This workshop examined recent advances in the use of co-processed active pharmaceutical ingredients as a technology to improve drug substance physicochemical properties and drug product manufacturing process robustness, and explored proposals for enabling commercialization of these transformative technologies. Regulatory considerations were discussed with a focus on the classification, CMC strategies, and CMC documentation supporting the use of this class of materials from clinical studies through commercialization. The workshop format was split between presentations from industry, academia and the FDA, followed by breakout sessions structured to facilitate discussion. Given co-processed API is a relatively new concept, the authors felt it prudent to compile these proceedings to gain further visibility to topics discussed and perspectives raised during the workshop, particularly during breakout discussions. Disclaimer: This paper reflects discussions that occurred among stakeholder groups, including FDA, on various topics. The topics covered in the paper, including recommendations, therefore, are intended to capture key discussion points. The paper should not be interpreted to reflect alignment on the different topics by the participants, and the recommendations provided should not be used in lieu of FDA published guidance or direct conversations with the Agency about a specific development program. This paper should not be construed to represent FDA's views or policies.

Development of protein-polymer conjugate nanoparticles for modulation of dendritic cell phenotype and antigen-specific CD4 T cell responses.

Polymeric nanoparticles (NPs) comprised of poly(lactic-co-glycolic acid) (PLGA) have found success in modulating antigen (Ag)-specific T cell responses for the treatment multiple immunological diseases. Common methods by which Ags are associated with NPs are through encapsulation and surface conjugation; however, these methods suffer from several limitations, including uncontrolled Ag loading, burst release, and potential immune recognition. To overcome these limitations and study the relationship between NP design parameters and modulation of innate and Ag-specific adaptive immune cell responses, we developed ovalbumin (OVA) protein-PLGA bioconjugate NPs (acNP-OVA). OVA was first modified by conjugation with multiple PLGA polymers to synthesize OVA-PLGA conjugates, followed by precise combination with unmodified PLGA to form acNP-OVA with well-defined Ag loadings, reduced burst release, and reduced antibody recognition. Expression of MHC II, CD80, and CD86 on bone marrow-derived dendritic cells (BMDCs) increased as a function of acNP-OVA Ag loading. NanoString studies using BMDCs showed that PLGA NPs generally induced anti-inflammatory gene expression profiles independent of the Ag delivery method, where S100a9, Sell, and Ppbp were most significantly reduced. Co-culture studies using acNP-OVA-treated BMDCs and OT-II CD4+ T cells revealed that Ag-specific T cell activation, expansion, and differentiation were dependent on Ag loading and formulation parameters. CD25 expression was induced using acNP-OVA with the lowest Ag loading; however, the induction of robust CD4+ T cell proliferative and cytokine responses required acNP-OVA formulations with higher Ag loading, which was supported using a regulatory T cell (Treg) induction assay. The distinct differences in Ag loading required to achieve various T cell responses supported the concept of an Ag loading threshold for Ag-specific immunotherapy. We anticipate this work will help guide NP designs and aid in the future development of NP-based immunotherapies for Ag-specific immunomodulation.

Surface Characterization as a Tool for Identifying the Factors Affecting the Dissolution Rate of Amorphous Solid Dispersion Tablets.

An amorphous solid dispersion (ASD) is a commonly used approach to enhancing the dissolution of poorly aqueous soluble drugs. Selecting the desired polymer and drug loading can be time-consuming. Surface properties, such as surface composition and wetting behavior, are essential factors controlling the dissolution of ASD tablets. Thus, our study aims to use surface characterization to understand the factors that affect the dissolution rate of ASD tablets. In this work, we prepared ASDs with itraconazole and hypromellose acetate succinate (HPMCAS) using spray drying. ASDs were prepared using three grades of HPMCAS and different drug loading levels (10%, 30%, and 50%). We prepared ASD tablets with two porosities. For each tablet, contact angles were measured using the Drop Shape Analyzer; surface free energies, disperse, and polar fractions were calculated based on the contact angles. We conducted near-infrared (NIR) and dissolution measurements of ASD tablets. Principal component analysis (PCA) was carried out to investigate the NIR spectra further. The relative PCA scores were reported with other sample properties. A partial least square (PLS) model using NIR scores, tablets' wetting properties, and dissolution rates revealed that water and buffer contact angles, surface free energy, and polar fraction are the most significant factors attributing to the dissolution rate of ASD tablets. This work understood the interplay between the surface properties and the dissolution rate of ASD tablets. Moreover, surface characterization can be the tool to screen the formulation and compaction process of ASD tablets in early development.

Formulation of smokeless tobacco products with a wide range of pH to study nicotine pharmacokinetics and pharmacodynamics.

The rate of nicotine absorption from tobacco products is a determinant of addiction potential and other detrimental health effects. Oral nicotine bioavailability from moist snuff smokeless tobacco (ST) is influenced by nicotine content, pH, flavors, and tobacco cut. For use in a clinical study testing the effect of pH on nicotine pharmacokinetics, four investigational ST products that differed only in pH were produced. A commercial ST product (Copenhagen Long Cut Original, pH 7.7) was modified with citric acid monohydrate (23 mg/g tobacco) or sodium carbonate (4.6 and 11 mg/g) to create products with pH 5.0, 8.2, and 8.6, respectively. All products - including the original product with pH 7.7 - were individually packaged (approximately 2 g) in aluminum foil pouches and stored frozen (-20 °C); pH, nicotine, tobacco-specific nitrosamines, moisture content, and mold and yeast counts were tested for up to 19 months to verify stability. Remarkable stability was demonstrated in this packaging/storage combination. For example, pH from all products were within 0.1 pH units and never exceeded 0.2 units. Nicotine concentration averaged 9.07 mg/g at baseline, maximal deviations from baseline in the four products averaged 0.30 mg/g. Similarly, TSNA, moisture content, yeast, and mold did not materially change. This study illustrates a method of investigational tobacco products formulation by manipulating a single design feature (or component) with the purpose of independently and systematically assessing its influence on nicotine bioavailability in a clinical study.

A method for the tribological assessment of oral pharmaceutical liquids.

OBJECTIVE: Patient acceptance of pediatric formulations is critical to compliance and consequently therapeutic outcomes; thus, having an in vitro method to evaluate sensory perception of pharmaceutical products would be beneficial. The objective of this research is to develop a sensitive and reproducible tribological method to characterize pharmaceutical suspensions at low force and sliding speeds. METHODS: The discriminating potential of the method was examined using tribology profiles (coefficient of friction (COF) vs. sliding speed) for commercially available products and products made for this study with widely varying sweetness, thickness, and grittiness; these formulations were used to judge the sensitivity of the method. Samples were measured using 3M Transpore™ surgical tape to simulate the tongue surface, steel half ring geometry, constant gap setting, target axial force of 2 N in a 600 s exponential ramp for rotation speed. RESULTS: The COF ranged from 0.1 to 0.6. For the speeds studied, the high viscosity commercial suspension ibuprofen drops and acetaminophen suspension show a classic Stribeck curve with an increasing COF at the higher rotation speeds, which indicates these formulations entered the hydrodynamic lubrication phase, while the lower viscosity suspensions only reached the mixed lubrication phase. CONCLUSION: The contribution of particles affects the COF in a dynamic tribologic pattern compared to products that are categorized as either low gritty or high viscosity. These results are important as they provide a potentially rapid in vitro method for screening pediatric medications and help to identify the factors that affect the palatability of pediatric formulations.

Lack of an Effect of Polysorbate 80 on Intestinal Drug Permeability in Humans.

PURPOSE: Despite no broad, direct evidence in humans, there is a potential concern that surfactants alter active or passive drug intestinal permeation to modulate oral drug absorption. The purpose of this study was to investigate the impact of the surfactant polysorbate 80 on active and passive intestinal drug absorption in humans. METHODS: The human (n = 12) pharmacokinetics (PK) of three probe substrates of intestinal absorption, valacyclovir, chenodeoxycholic acid (CDCA), and enalaprilat, were assessed. Endogenous bile acid levels were assessed as a secondary measure of transporter and microbiota impact. RESULTS: Polysorbate 80 did not inhibit peptide transporter 1 (PepT1)- or apical sodium bile acid transporter (ASBT)-mediated PK of valacyclovir and CDCA, respectively. Polysorbate 80 did not increase enalaprilat absorption. Modest increases in unconjugated secondary bile acid Cmax ratios suggest a potential alteration of the in vivo intestinal microbiota by polysorbate 80. CONCLUSIONS: Polysorbate 80 did not alter intestinal membrane fluidity or cause intestinal membrane disruption. This finding supports regulatory relief of excipient restrictions for Biopharmaceutics Classification System-based biowaivers.

Cholecalciferol complexation with hydroxypropyl-ß-cyclodextrin (HPBCD) and its molecular dynamics simulation.

The focus of the current study is to investigate cholecalciferol (vitamin D3) solubilization by hydroxypropyl-ß-cyclodextrin (HPBCD) complexation through experimental and computational studies. Phase solubility diagram of vitamin D3 (completely insoluble in water) has an AP profile revealing a deviation from a linear regression with HPBCD concentration increase. Differential scanning calorimetry (DSC) is the best tool to confirm complex formation by disappearance of cholecalciferol exothermic peak in cholecalciferol-HPBCD complex thermogram, due to its amorphous state by entering HPBCD inner hydrophobic cavity, similarly validated by Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). AP solubility diagram profile can be associated with cholecalciferol-HPBCD complex instability in liquid phase requiring spray drying to bring it to a solid dispersion state (always more stable) illustrated by scanning electron microscopy (SEM). Computational studies led to a deeper understanding and clarification, at molecular level, of the interactions within cholecalciferol-HPBCD complex. Thermodynamics and geometry of the complex were investigated by molecular dynamics (MD) simulation.

Spray layering of human immunoglobulin G: Optimization of formulation and process parameters.

Spray layering is a technique used to apply drug or functional polymers onto carrier beads; in addition, it can be used as an alternative method for protein drying and to layer protein on a multiparticulate delivery system. In this study, the effects of formulation variables and process parameters on human immunoglobulin G (IgG) properties during spray layering were studied. Excipients including polyvinylpyrrolidone (PVP), trehalose, sucrose, L-arginine monohydrochloride were studied for their effects on improving IgG stability during spray layering. Process parameters including protein solution feed rate, inlet air temperature, inlet air flow rate, and atomization pressure of spray solution were studied using 24 full factorial design with three replicated center points. Adding PVP into the formulation significantly decreased the turbidity of the reconstitution solution and increased the IgG recovery. Adding trehalose, sucrose, or arginine further improved protein recovery after reconstitution and decreased the percentage of IgG aggregation. The Design of Experiments (DOE) results showed no significant effects from the four process factors on the process yield and IgG protein recovery in the range of parameters studied. All main factors except atomization pressure had significant effects on monomer percentage, among which air flow represented the most significant influence. In addition, the inlet air temperature had significant effects on the in vitro binding activity of IgG after spray layering. By optimizing the formulation, we were able to recover the most spray layered IgG and reduce the IgG aggregation during the process. The DOE studies gave insight into how process variables affect the spray layered products.

An Extract of Taro (Colocasia esculenta) Mediates Potent Inhibitory Actions on Metastatic and Cancer Stem Cells by Tumor Cell-Autonomous and Immune-Dependent Mechanisms.

The taro plant, Colocasia esculenta, contains bioactive proteins with potential as cancer therapeutics. Several groups have reported anti-cancer activity in vitro and in vivo of taro-derived extracts (TEs). We reported that TE inhibits metastasis in a syngeneic murine model of Triple-Negative Breast Cancer (TNBC). PURPOSE: We sought to confirm our earlier studies in additional models and to identify novel mechanisms by which efficacy is achieved. METHODS: We employed a panel of murine and human breast and ovarian cancer cell lines to determine the effect of TE on tumor cell viability, migration, and the ability to support cancer stem cells. Two syngeneic models of TNBC were employed to confirm our earlier report that TE potently inhibits metastasis. Cancer stem cell assays were employed to determine the ability of TE to inhibit tumorsphere-forming ability and to inhibit aldehyde dehydrogenase activity. To determine if host immunity contributes to the mechanism of metastasis inhibition, efficacy was assessed in immune-compromised mice. RESULTS: We demonstrate that viability of some, but not all cell lines is inhibited by TE. Likewise, tumor cell migration is inhibited by TE. Using 2 immune competent, syngeneic models of TNBC, we confirm our earlier findings that tumor metastasis is potently inhibited by TE. We also demonstrate, for the first time, that TE directly inhibits breast cancer stem cells. Administration of TE to mice elicits expansion of several spleen cell populations but it was not known if host immune cells contribute to the mechanism by which TE inhibits tumor cell dissemination. In novel findings, we now show that the ability of TE to inhibit metastasis relies on immune T-cell-dependent, but not B cell or Natural Killer (NK)-cell-dependent mechanisms. Thus, both tumor cell-autonomous and host immune factors contribute to the mechanisms underlying TE efficacy. Our long-term goal is to evaluate TE efficacy in clinical trials. Most of our past studies as well as many of the results reported in this report were carried out using an isolation protocol described earlier (TE). In preparation for a near future clinical trial, we have now developed a strategy to isolate an enriched taro fraction, TE-method 2, (TE-M2) as well as a more purified subfraction (TE-M2F1) which can be scaled up under Good Manufacturing Practice (GMP) conditions for evaluation in human subjects. We demonstrate that TE-M2 and TE-M2F1 retain the anti-metastatic properties of TE. CONCLUSIONS: These studies provide further support for the continued examination of biologically active components of Colocasia esculenta as potential new therapeutic entities and identify a method to isolate sufficient quantities under GMP conditions to conduct early phase clinical studies.

Effects of compaction and storage conditions on stability of intravenous immunoglobulin - Implication on developing oral tablets of biologics.

Biological products, such as therapeutic proteins, vaccines and cell - based therapeutics have a rapidly growing global market. Monoclonal antibody represents a major portion of the biologics market. For biologics that target gastrointestinal tract, the oral delivery route offers many advantages, such as better patient compliance, easy administration and increased stability, over the parental route of administration. To lay the ground work for the oral delivery of biologics, we studied the solid state properties and effects of compaction pressure, particle size, and storage relative humidity on the stability of immunoglobulin G (IVIG). We employed complementary analytical and biophysical techniques, such as size exclusion chromatography and Dynamic light scattering to characterize the aggregates, circular dichroism and solid state Fourier-transform infrared spectroscopy to evaluate protein secondary structure and nano-DSC to probe thermal stability of protein conformations. Our results showed storage relative humidity could induce conformational changes and aggregation of IVIG. However, the IVIG binding activity did not significantly change with relative humidity. The commonly used compaction pressures did not promote protein aggregation, but noticeably reduced binding activity.

Pediatric formulation development - Challenges of today and strategies for tomorrow: Summary report from M-CERSI workshop 2019.

A workshop on "Pediatric Formulation Development: Challenges of Today and Strategies for Tomorrow" was organized jointly by the University of Maryland's Center of Excellence in Regulatory Science and Innovation (M-CERSI), the U.S. Food and Drug Administration (FDA) and the International Consortium for Innovation and Quality in Pharmaceutical Development (IQ) Drug Product Pediatric Working Group (PWG). This multi-disciplinary, pediatric focused workshop was held over a two-day period (18-19 Jun 2019) and consisted of participants from industry, regulatory agencies, academia and other organizations from both US and Europe. The workshop consisted of sequential sessions on formulation, analytical, clinical, and regulatory and industry lessons learned and future landscape. Each session began with a series of short framing presentations, followed by facilitated breakout sessions and panel discussion. The formulation session was dedicated to three main topics pertaining to drug product acceptability, excipients in pediatrics and oral administration device considerations. The analytical session discussed key considerations for dosing vehicle selection and analytical strategies for testing of different dosage forms, specifically mini-tablets (multiparticulates). The clinical session highlighted the influence of pediatric pharmacokinetics prediction on formulation design, pediatric drug development strategies and clinical considerations to support pediatric formulation design. The regulatory and industry lessons learned and future landscape session explored the regional differences that exist in regulatory expectations, requirements for pediatric formulation development, and key patient-centric factors to consider when developing novel pediatric formulations. This session also discussed potential collaboration opportunities and tools for pediatric formulation development. This manuscript summarizes the key discussions and outcomes of all the sessions in the workshop with a broadened review and discussion of the topics that were covered.