Validation of a fully automatic three-dimensional assessment of orthognathic surgery.

The aim of the present study was to propose and validate FAST3D: a fully automatic three-dimensional (3D) assessment of the surgical accuracy and the long-term skeletal stability of orthognathic surgery. To validate FAST3D, the agreement between FAST3D and a validated state-of-the-art semi-automatic method was calculated by intra-class correlation coefficients (ICC) at a 95 % confidence interval. A one-sided hypothesis test was performed to evaluate whether the absolute discrepancy between the measurements produced by the two methods was statistically significantly below a clinically relevant error margin of 0.5 mm. Ten subjects (six male, four female; mean age 24.4 years), class II and III, who underwent a combined three-piece Le Fort I osteotomy, bilateral sagittal split osteotomy and genioplasty, were included in the validation study. The agreement between the two methods was excellent for all measurements, ICC range (0.85-1.00), and fair for the rotational stability of the chin, ICC = 0.54. The absolute discrepancy for all measurements was statistically significantly lower than the clinical relevant error margin (p < 0.008). Within the limitations of the present validation study, FAST3D demonstrated to be reliable and may be adopted whenever appropriate in order to reduce the work load of the medical staff.

A Semi-Automatic Approach for Holistic 3D Assessment of Temporomandibular Joint Changes.

The literature lacks a reliable holistic approach for the three-dimensional (3D) assessment of the temporomandibular joint (TMJ) including all three adaptive processes, which are believed to contribute to the position of the mandible: (1) adaptive condylar changes, (2) glenoid fossa changes, and (3) condylar positional changes within the fossa. Hence, the purpose of the present study was to propose and assess the reliability of a semi-automatic approach for a 3D assessment of the TMJ from cone-beam computed tomography (CBCT) following orthognathic surgery. The TMJs were 3D reconstructed from a pair of superimposed pre- and postoperative (two years) CBCT scans, and spatially divided into sub-regions. The changes in the TMJ were calculated and quantified by morphovolumetrical measurements. To evaluate the reliability, intra-class correlation coefficients (ICC) were calculated at a 95% confidence interval on the measurements of two observers. The approach was deemed reliable if the ICC was good (>0.60). Pre- and postoperative CBCT scans of ten subjects (nine female; one male; mean age 25.6 years) with class II malocclusion and maxillomandibular retrognathia, who underwent bimaxillary surgery, were assessed. The inter-observer reliability of the measurements on the sample of the twenty TMJs was good to excellent, ICC range (0.71-1.00). The range of the mean absolute difference of the repeated inter-observer condylar volumetric and distance measurements, glenoid fossa surface distance measurements, and change in minimum joint space distance measurements were (1.68% (1.58)-5.01% (3.85)), (0.09 mm (0.12)-0.25 mm (0.46)), (0.05 mm (0.05)-0.08 mm (0.06)) and (0.12 mm (0.09)-0.19 mm (0.18)), respectively. The proposed semi-automatic approach demonstrated good to excellent reliability for the holistic 3D assessment of the TMJ including all three adaptive processes.

Three-Dimensional Accuracy and Stability of Personalized Implants in Orthognathic Surgery: A Systematic Review and a Meta-Analysis.

This systematic review aimed to determine the accuracy/stability of patient-specific osteosynthesis (PSI) in orthognathic surgery according to three-dimensional (3D) outcome analysis and in comparison to conventional osteosynthesis and computer-aided designed and manufactured (CAD/CAM) splints or wafers. The PRISMA guidelines were followed and six academic databases and Google Scholar were searched. Records reporting 3D accuracy/stability measurements of bony segments fixated with PSI were included. Of 485 initial records, 21 met the eligibility (566 subjects), nine of which also qualified for a meta-analysis (164 subjects). Six studies had a high risk of bias (29%), and the rest were of low or moderate risk. Procedures comprised either single-piece or segmental Le Fort I and/or mandibular osteotomy and/or genioplasty. A stratified meta-analysis including 115 subjects with single-piece Le Fort I PSI showed that the largest absolute mean deviations were 0.5 mm antero-posteriorly and 0.65° in pitch. PSIs were up to 0.85 mm and 2.35° more accurate than conventional osteosynthesis with CAD/CAM splint or wafer (p < 0.0001). However, the clinical relevance of the improved accuracy has not been shown. The literature on PSI for multi-piece Le Fort I, mandibular osteotomies and genioplasty procedure is characterized by high methodological heterogeneity and a lack of randomized controlled trials. The literature is lacking on the 3D stability of bony segments fixated with PSI.

Pharyngeal airway changes five years after bimaxillary surgery - A retrospective study.

The aim of this study was to retrospectively evaluate pharyngeal airway (PA) changes after bimaxillary surgery (BMS). Preoperative, immediate- and 5-year postoperative cone-beam computed tomography images of subjects who underwent BMS were assessed. The primary outcome variable was the PA volume. The secondary outcome variables were the retropalatal and oropharyngeal volumes, cross-sectional area, minimal hydraulic diameter, soft tissue, skeletal movements and sleep-disordered breathing (SDB). A total of 50 patients were included, 33 female and 17 male, with a mean age of 26.5 years. A significant increase in the PA volume was seen immediately after surgery (40%), and this increase was still present at 5-year follow-up (34%) (P < 0.001). A linear mixed model regression analysis revealed that a mandibular advancement of ≥5 mm (P = 0.025) and every 1-mm upward movement of epiglottis (P = 0.016) was associated with a volume increase of the oropharyngeal compartment. Moreover, ≥5-mm upward movement of hyoid bone (P = 0.034) and every 1-mm increase in minimal hydraulic diameter (P < 0.001) correlated with an increase of the PA volume. A total of 30 subjects reported improvement in the SDB at 5-year follow-up. This study demonstrated that BMS led to an increase in PA dimensions in non-OSA patients, and these changes were still present at 5-year follow-up. BMS seemed to induce clinical improvement in SDB.

Comparison of surface- and voxel-based registration on the mandibular ramus for long-term three-dimensional assessment of condylar remodelling following orthognathic surgery.

OBJECTIVES: The purpose of the present study was to validate and compare the accuracy and reliability of surface- and voxel-based registration on the mandibular rami for long-term three-dimensional (3D) evaluation of condylar remodelling following Orthognathic Surgery. METHODS: The mandible was 3D reconstructed from a pair of superimposed pre- and postoperative (two years) cone-beam computerized tomography scans and divided into the condyle, and 21 ramal regions. The accuracy of surface- and voxel-based registration was measured by the absolute mean surface distance of each region after alignment of the pre- and postoperative rami. To evaluate the reliability, mean absolute differences and intraclass correlation coefficients (ICC) were calculated at a 95% confidence interval on volumetric and surface distance measurements of two observers. Paired t-tests were applied to statistically evaluate whether the accuracy and reliability of surface- and voxel-based registration were significantly different (p < 0.05). RESULTS: A total of twenty subjects (sixteen female; four male; mean age 27.6 years) with class II malocclusion and maxillomandibular retrognathia, who underwent bimaxillary surgery, were included. Surface-based registration was more accurate and reliable than voxel-based registration on the mandibular ramus two years post-surgery (p < 0.05). The interobserver reliability of using surface-based registration was excellent, ICC range [0.82-1.00]. For voxel-based registration, the interobserver reliability ranged from poor to excellent [0.00-0.98]. The measurement error introduced by applying surface-based registration for assessment of condylar remodelling was considered clinical irrelevant (1.83% and 0.18 mm), while the measurement error introduced by voxel-based registration was considered clinical relevant (5.44% and 0.52 mm). CONCLUSIONS: Surface-based registration was proven more accurate and reliable compared to voxel-based registration on the mandibular ramus for long-term 3D assessment of condylar remodelling following Orthognathic Surgery. However, importantly, the performance difference may be caused by an inappropriate reference structure, proposed in the literature, and applied in this study.

[Assessment of nasal function by computational fluid dynamics].

This review summarises the knowledge of computational fluid dynamics (CFD) which combines fluid mechanics, mathematics and computer simulation to analyse airflow and air conditioning of the nasal airway. Traditional objective measures are hampered by low correlation to subjective outcome, whereas CFD variables such as heat flux and nasal middle airflow show good correlation. Studies also show great potential for virtual surgery, when the nasal procedure is simulated, and CFD analyse the impact on airflow and conditioning to optimize surgical planning. CFD could be of great value in rhinology and improve nasal surgery.

Does the Glenoid Fossa Change Following Orthognathic Surgery?

PURPOSE: Glenoid fossa morphology may change following orthognathic surgery and may subsequently affect skeletal stability and functionality, however hardly documented. Hence, the purpose of this study was to evaluate the morphological change of the glenoid fossa 2 years after bimaxillary surgery. METHODS: A case series was performed including subjects diagnosed with maxillary and/or mandibular growth disturbances, who underwent bimaxillary surgery between March 2012 and November 2017 at the Department of Oral and Maxillofacial Surgery, University Hospital of Southern Denmark, Esbjerg, Denmark. The study variables were gender, age, and postoperative condylar resorption. Subjects were sampled evenly within subgroups with and without postoperative condylar resorption. The outcome variable, three-dimensional morphological change of the glenoid fossa, was calculated as surface distance in mm between superimposed preoperative and postoperative (2 years) cone-beam computed tomography scans, and the glenoid fossa was spatially divided into 4 regions. Evaluation of glenoid fossa changes of more than one voxel (>0.3 mm) and comparison of subjects with and without postoperative condylar resorption were performed by one-sample and unpaired t tests, respectively. RESULTS: Twenty subjects (16 women; 4 men; mean age = 27.6 years) with Class II malocclusion and maxillomandibular retrognathia were included. The glenoid fossa changes (0.36 mm) were significant (P = .021) and significantly larger in subjects with condylar resorption than in those without condylar resorption in the anterior-lateral (0.40 mm vs 0.27 mm, P = .021) and anterior-medial fossa region (0.48 mm vs 0.26 mm, P = .015). CONCLUSIONS: Significant morphological fossa changes were found 2 years after orthognathic surgery, and subjects with postoperative condylar resorption showed a significantly higher degree of morphological change in the anterior glenoid fossa than subjects without postoperative condylar resorption.

A semi-automatic approach for longitudinal 3D upper airway analysis using voxel-based registration.

OBJECTIVES: To propose and validate a reliable semi-automatic approach for three-dimensional (3D) analysis of the upper airway (UA) based on voxel-based registration (VBR). METHODS: Post-operative cone beam computed tomography (CBCT) scans of 10 orthognathic surgery patients were superimposed to the pre-operative CBCT scans by VBR using the anterior cranial base as reference. Anatomic landmarks were used to automatically cut the UA and calculate volumes and cross-sectional areas (CSA). The 3D analysis was performed by two observers twice, at an interval of two weeks. Intraclass correlations and Bland-Altman plots were used to quantify the measurement error and reliability of the method. The relative Dahlberg error was calculated and compared with a similar method based on landmark re-identification and manual measurements. RESULTS: Intraclass correlation coefficient (ICC) showed excellent intra- and inter-observer reliability (ICC ≥ 0.995). Bland-Altman plots showed good observer agreement, low bias and no systematic errors. The relative Dahlberg error ranged between 0.51 and 4.30% for volume and 0.24 and 2.90% for CSA. This was lower when compared with a similar, manual method. Voxel-based registration introduced 0.05-1.44% method error. CONCLUSIONS: The proposed method was shown to have excellent reliability and high observer agreement. The method is feasible for longitudinal clinical trials on large cohorts due to being semi-automatic.

Virtual Analysis of Segmental Bimaxillary Surgery: A Validation Study.

PURPOSE: Three-dimensional (3D) assessment of orthognathic surgery is often time consuming, relies on manual re-identification of anatomical landmarks or is limited to non-segmental osteotomies. The purpose of the present study was to propose and validate an automated approach for 3D assessment of the accuracy and postoperative outcome of segmental bimaxillary surgery. METHODS: A semi-automatic approach was developed and validated for virtual surgical analysis (VSA) of segmental bimaxillary surgery using a pair of pre- and postoperative (2 weeks) cone-beam computerized tomography (CBCT) scans. The output of the VSA, the accuracy of the surgical outcome, was calculated as 3D translational and rotational differences between the planned and postoperative movements of the individual bone segments. To evaluate the reliability of the proposed VSA, intra-class correlation coefficients (ICC) were calculated at a 95% confidence interval on measurements of 2 observers. The VSA was deemed reliable if the ICC was excellent (> 0.80) and the absolute difference of the repeated intra- and inter-observer translational and rotational measurements were significantly lower (p < 0.05) than a hypothesized clinical relevant threshold of 1 voxel (0.45 mm) and 1 degree, respectively. RESULTS: A total of 10 subjects (6 male; 4 women; mean age 24.4 years) with skeletal class 2 and 3, who underwent segmental bimaxillary surgery, 3-piece Le Fort I, bilateral sagittal split osteotomy and genioplasty, were recruited. The intra- and inter-observer reliability was excellent, ICC range [0.96 - 1.00]. The range of the mean absolute difference of the repeated intra- and inter-observer translational and rotational measurements were [0.07 mm (0.05) - 0.20 mm (0.19)] and [0.11˚ (0.08) - 0.63˚ (0.42)], respectively. This was significantly lower than the hypothesized clinical relevant thresholds (P < .001). CONCLUSION: The validation showed that the VSA has excellent reliability for quantitative assessment of the postoperative outcome and accuracy of segmental bimaxillary surgery.

Clinically relevant results of reverse total shoulder arthroplasty for patients younger than 65 years compared to the older patients.

BACKGROUND: Reverse total shoulder arthroplasty was originally designed for older patients with rotator cuff arthropathy and produces good results. The main objective of this retrospective study was to compare the patients younger than 65 years vs. the older patients in terms of the complications of reverse total shoulder arthroplasty and the functional recovery. METHODS: From January 2014 to January 2020, 566 patients who underwent the reverse total shoulder arthroplasty were divided into two groups (group A, ≥ 65 years, n = 506; group B, < 65 years, n = 60). The patients reported the quality of life using the patient-reported Western Ontario Osteoarthritis of the Shoulder index. The Constant score was obtained preoperatively and 3 months postoperatively. The complications and reoperations were compared. Statistical significance was set at P < 0.05. RESULTS: Clinically relevant improvements were found in group A and B. There was a multivariate statistically-significant but not clinically relevant difference in the change over time between group A and B. The mean 12-month Western Ontario Osteoarthritis of the Shoulder indexes were 58 in group B and 71 in group A. The mean Constant scores were 44 in group B vs. 43 in group A. Compared to group A, group B had a non-significant odds ratio of 1.9, which did not reach the clinically relevant Western Ontario Osteoarthritis of the Shoulder index of group A. CONCLUSION: In patients younger than 65 years of age, RTSA seems to be a safe procedure in short term follow-up. After 1 year, we found no increased risk of complications, revision, or inferior outcomes compared to patients older than 65 years of age. Consequently, after one-year, RTSA provided clinically relevant improvements in the patients' quality of life and shoulder strength regardless of age.