Unveiling the therapeutic potential: Evaluation of anti-inflammatory and antineoplastic activity of Magnolia champaca Linn's stem bark isolate through molecular docking insights.

Magnolia champaca Linn. has traditionally been used for medicinal activity in Asia for treating various chronic diseases as well as a source of food, medicines, and other commodities. Due to the long-used history of this plant, the present study was designed to explore the in vitro, in vivo and in silico anti-inflammatory and antineoplastic properties of the methanolic extract and fractions and the pure compound isolated from the most active chloroform fraction (CHF) of the stem bark of the plant. The isolated compound from the most active CHF was characterized and identified as a glycoside, trans-syringin, through chromatographic and spectroscopic (1H-NMR and 13C-NMR) analyses. In the in vitro anti-inflammatory assay, CHF was most effective in inhibiting inflammation and hemolysis of RBCs by 73.91 ± 1.70% and 75.92 ± 0.14%, respectively, induced by heat and hypotonicity compared to standard acetylsalicylic acid. In the egg albumin denaturation assay, CME and CHF showed the highest inhibition by 56.25 ± 0.82% and 65.82 ± 3.52%, respectively, contrasted with acetylsalicylic acid by 80.14 ± 2.44%. In an in vivo anti-inflammatory assay, statistically significant (p < 0.05) decreases in the parameters of inflammation, such as paw edema, leukocyte migration and vascular permeability, were recorded in a dose-dependent manner in the treated groups. In the antineoplastic assay, 45.26 ± 2.24% and 68.31 ± 3.26% inhibition of tumor cell growth for pure compound were observed compared to 73.26 ± 3.41% for standard vincristine. Apoptotic morphologic alterations, such as membrane and nuclear condensation and fragmentation, were also found in EAC cells after treatment with the isolated bioactive pure compound. Such treatment also reversed the increased WBC count and decreased RBC count to normal values compared to the untreated EAC cell-bearing mice and the standard vincristine-treated mice. Subsequently, in silico molecular docking studies substantiated the current findings, and the isolated pure compound and standard vincristine exhibited -6.4 kcal/mol and -7.3 kcal/mol binding affinities with topoisomerase-II. Additionally, isolated pure compound and standard diclofenac showed -8.2 kcal/mol and -7.6 kcal/mol binding affinities with the COX-2 enzyme, respectively. The analysis of this research suggests that the isolated bioactive pure compound possesses moderate to potent anti-inflammatory and antineoplastic activity and justifies the traditional uses of the stem bark of M. champaca. However, further investigations are necessary to analyze its bioactivity, proper mechanism of action and clinical trials for the revelation of new drug formulations.

Advancements in adsorption based carbon dioxide capture technologies- A comprehensive review.

The significant increase in energy consumption has facilitated a rapid increase in offensive greenhouse gas (GHG) and CO2 emissions. The consequences of such emissions are one of the most pivotal concerns of environmental scientists. To protect the environment, they are conducting the necessary research to protect the environment from the greenhouse effect. Among the different sources of CO2 emission, power plants contribute the largest amount of CO2 and as the number of power plants around the world is rising gradually due to increasing energy demand, the amount of CO2 emission is also rising subsequently. Researchers have developed different potential technologies to capture post-combustion CO2 capture from powerplants among which membrane-based, cryogenic, absorption and adsorption-based CO2 processes have gained much attention due to their applicability at the industrial level. In this work, adsorption-based CO2 technologies are comprehensively reviewed and discussed to understand the recent advancements in different adsorption technologies and several adsorbent materials. Researchers and scientists have developed and advanced different adsorption technologies including vacuum swing adsorption, temperature swing adsorption, pressure swing adsorption, and electric swing adsorption, etc. To further improve the CO2 adsorption capacity with a compact CO2 adsorption unit, researchers have integrated different adsorption technologies to investigate their performance, such as temperature vacuum swing adsorption, pressure vacuum swing adsorption, electric temperature pressure swing adsorption, etc. Different adsorbent materials have been tested to evaluate their applicability for CO2 adsorption and among these adsorbents, advanced carbonaceous, non-carbonaceous, polymeric, and nanomaterials have achieved much attention due to their suitable characteristics that are required for adsorbing CO2. Researchers have reported that higher CO2 adsorption capacity can be achieved by integrating different adsorption technologies and employing suitable adsorbent material for that system. This comprehensive review also provides future directions that may assist researchers in developing novel adsorbent materials and gaining a proper understanding of the selection criteria for effective CO2 adsorption processes with suitable adsorbents.

Integration of ion transport membrane with conventional powerplant to enhance the plant capacity with improved power production.

Ion Transport Membrane (ITM) is an emerging technology for producing O2 by separating air in its membrane. To decrease energy loss in air separation unit and to increase the overall efficiency of a power generation unit ITM is added with the gasification unit in this model. Ceramic materials are generally used to make the ion transport membrane that produces oxygen by conducting oxygen ions at a specified temperature. Potential advantages can be gained by integrating ITM technology with power generation units as 99% pure oxygen is produced from ITM. Using ITM air separator is more beneficial compared to cryogenic air separation as ITM technology helps to improve IGCC overall efficiency and also reduces plant auxiliaries than that of power generation systems integrated with cryogenic. This paper proposed a novel and effective integration of ITM, gas turbine, HRSG system, gas clean up system and gasification unit to produce sustainable energy. Environmental impacts are considered to design this integrated power generation unit. The proposed model achieved a high gross electric efficiency of 47.58% and high net power of 296730 kW which revealed its potentiality compared to available cryogenic ASU-based combine cycle power plants.

Metal Oxide Nanosheet: Synthesis Approaches and Applications in Energy Storage Devices (Batteries, Fuel Cells, and Supercapacitors).

In recent years, the increasing energy requirement and consumption necessitates further improvement in energy storage technologies to obtain high cycling stability, power and energy density, and specific capacitance. Two-dimensional metal oxide nanosheets have gained much interest due to their attractive features, such as composition, tunable structure, and large surface area which make them potential materials for energy storage applications. This review focuses on the establishment of synthesis approaches of metal oxide nanosheets (MO nanosheets) and their advancements over time, as well as their applicability in several electrochemical energy storage systems, such as fuel cells, batteries, and supercapacitors. This review provides a comprehensive comparison of different synthesis approaches of MO nanosheets, as well their suitability in several energy storage applications. Among recent improvements in energy storage systems, micro-supercapacitors, and several hybrid storage systems are rapidly emerging. MO nanosheets can be employed as electrode and catalyst material to improve the performance parameters of energy storage devices. Finally, this review outlines and discusses the prospects, future challenges, and further direction for research and applications of metal oxide nanosheets.

A flavone from the ethyl acetate extract of Leea rubra leaves with DNA damage protection and antineoplastic activity.

Among the major constituents of Leea rubra (Family Vitaceae) leaves, phenolic and flavonoind compounds are most important for therapeutic purposes and the plant parts have been used in traditional medicine to treat several diseases for long. Thus, in order to scientifically confirm the traditional uses of the L. rubra leaves, the present study was designed to investigate the efficacy of the isolated flavones against AAPH induced oxidative damage to pUC19 DNA by gel electrophoresis and antineoplastic activity was evaluated on Ehrlich ascites carcinoma (EAC) bearing Swiss albino mice by evaluating percentage inhibition of cell growth, morphological changes of EAC cells and hematological parameters of the mice. The isolation was carried out by column chromatography and structure was revealed by 1H-NMR and 13C NMR. The result shows that, the isolated compound was identified as myricetin 4'-methoxy-3-O-α-l-rhamnopyranoside based on previously reported data. The isolated flavone effectively inhibited AAPH-induced oxidative damage to DNA; because it could inhibit the formation of circular and linear forms of the DNA. In anti-proliferative assay, 76% growth inhibition of EAC cells was observed as compare to the control mice (p<0.05) at a dose 100 mg/kg body weight. Thus the isolated flavone showed great importance as a possible therapeutic agent in preventing oxidative damage to DNA and the chronic diseases caused by such DNA damage, and can also become important in cancer chemotherapy.