Sensomics-assisted analysis unravels the formation of the Fungus Aroma of Fu Brick Tea.

Fu Brick Tea (FBT) is characterized by Fungus Aroma (FA), which determines the quality of FBT products. However, the aroma constituents and their interactive mechanism for FA remain unclear. In this study, the FBT sample with the optimal FA characteristics was selected from 29 FBTs. Then, 19 components with OAV ≥ 1 were identified as the odorants involved in the FA formation. The aroma recombination test suggested that the FA was potentially produced by the synergistic interplay among the 15 key odorants, including (E,E)-2,4-heptadienal, (E,E)-2,4-nonadienal, (E)-2-nonenal, (E,Z)-2,6-nonadienal, (E)-2-octenal, (E)-ß-ionone, 4-ketoisophorone, dihydroactinidiolide, (E)-ß-damascenone, 1-octen-3-ol, linalool, geraniol, heptanal, hexanal, and phenylacetaldehyde. And, the synergistic effects between them were preliminarily studied by aroma omissions, such as modulatory effects, masking effects, compensatory effects, and novelty effects, ultimately contributing to the FA. In all, this work helps us better understand the formation of the FA and provides a basis for the improvement of FBT production technology.

Effects of different aging methods on the ability of biochar to adsorb heavy metal cadmium and its physical and chemical properties.

The aging process can affect the physical and chemical properties as well as adsorption capacity of biochar. This study focuses on the heavy metal cadmium (Cd) as the research object, and artificially ages biochar prepared from rice straw and corn straw through accelerated freeze-thaw cycles, alternating dry wet cycles, and ultraviolet light treatment, in order to evaluate the effects of different aging conditions on the physical and chemical properties of the two different types of biochar and on their adsorption capacities for Cd. After aging, the pH of rice and corn biochar decreased to varying degrees, respectively. The surface structure was ruptured, the average pore diameter was decreased, and the specific surface area was increased by 27.3%, 21.9%, and 9.8% (rice) and 95.4%, 27.7%, and 13.4% (corn). Ultraviolet light aging has the most significant impact on the elemental content of biochar, and the C content was decreased by 12.4% (rice) and 9.3% (corn). The O content was increased by 11.2% (rice) and 44.1% (corn), and the numbers of O/C, H/C, (O + N)/C, and oxygen-containing functional groups were increased. These results demonstrate that the aging process reduces the degree of aromatization of biochar, while enhancing its polarity and Cd adsorption capacity. Rice straw biochar (RSB) has a greater ability to adsorb Cd than corn straw biochar (CSB). In addition, ultraviolet light aging is particularly effective in increasing heavy metal adsorption.

Widely targeted volatileomics analysis reveals the typical aroma formation of Xinyang black tea during fermentation.

Xinyang black tea (XYBT) is characterized by the honey sugar-like aroma which is produced during the fermentation process. However, the formation of this typical aroma is still unclear. We here performed widely targeted volatileomics analysis combined with GC-MS and detected 116 aroma active compounds (AACs) with OAV > 1. These AACs were mainly divided into terpenoids, pyrazine, volatile sulfur compounds, esters, and aldehydes. Among them, 25 significant differences AACs (SDAACs) with significant differences in fermentation processes were identified, comprising phenylacetaldehyde, dihydroactinidiolide, α-damascenone, ß-ionone, methyl salicylate, and so forth. In addition, sensory descriptions and partial least squares discriminant analysis demonstrated that phenylacetaldehyde was identified as the key volatile for the honey sugar-like aroma. We further speculated that phenylacetaldehyde responsible for the aroma of XYBT was probably produced from the degradation of L-phenylalanine and styrene. In conclusion, this study helps us better understand the components and formation mechanism of the honey sugar-like aroma of XYBT, providing new insight into improving the processing techniques for black tea quality.

Effects of microplastics and cadmium on the soil-wheat system as single and combined contaminants.

Two types of microplastics (MPs) (micro polyethylene (mPE) and micro polypropylene (mPP)) were studied alongside and cadmium (Cd) to determine how they affected soil-wheat systems, both individually and in mixed combinations. This was accomplished by carrying out a pot experiment to reveal their respective interaction effects. Results showed that in different Cd pollution levels soils (0, 1, and 5 mg kg-1), chlorophyll concentrations in wheat leaves decreased markedly with rising levels of mPE/mPP. In the single mPE treatment, as the mPE content in the soil increased, the aboveground and root biomass improved. By contrast, in the single mPP treatment, when the mPP content was low, the aboveground biomass of wheat increased and with the mPP content increased, the aboveground biomass of wheat decreased. This result was also shown in the combined contamination of mPE/mPP and Cd (1 mg kg-1) in the root biomass. With an increase in Cd concentration (that is, at 5 mg kg-1) in the combined contamination, this phenomenon continued in the aboveground biomass while in the roots, there was a promotion effect. At Cd contaminated soil (1 mg kg-1), MPs inhibited Cd enrichment in aboveground wheat, but at 5 mg kg-1, Cd enrichment was promoted instead, in both aboveground and roots. Adding mPE/mPP diminished pH and the Cd effective state concentration in soil. The combined contamination of mPE/mPP and Cd affected the Cd biological enrichment in the wheat to some extent, which was influenced by the types of MP and pollution levels of Cd in the soil.

Effect of Microplastics on the Adsorption and Desorption Properties of Cadmium in Soil.

This study analyzed the role of micro polyethylene (mPE) and micro polypropylene (mPP) on cadmium (Cd) adsorption and desorption in soil. Cd adsorption in soils reached equilibrium within 240 min with or without mPP/mPE. The largest Cd adsorption amount was 923.88 mg kg-1 in the control treatment (no MPs). The Cd adsorption amount in the mPP treatment was 872.21 mg kg-1, greater than that in the mPE treatment (780.21 mg kg-1). MPs reduced the soil adsorption of Cd to some extent. Soils supplemented with mPE were more inhibitory to Cd adsorption than mPP. The pseudo-second-order model equation proved to be the most optimal equation for describing Cd adsorption dynamics in the presence of different MPs, while the Freundlich equation was best for describing isothermal adsorption of Cd in the presence of MPs. MPs facilitate the desorption of metals from the soil.

Role of particle aggregates in herbal medicine decoction showing they are not useless: considering Coptis chinensis decoction as an example.

A large number of plants and fungi are homologs of medicine and food, and are used in the form of decoctions for complementary foods, dietary cures, and disease therapy in traditional medicine. Besides the widespread concern around the physiological and pharmacological actions of the active ingredients, the phase change in decoction and its influences on the active ingredients' absorption should not be ignored. Lots of particle aggregates are generated during the decoction of herbal medicine and then end up being taken together with the active ingredients. The question arises, "Is the absorption of active ingredients associated with the particle aggregates in decoction?" The present study takes the Coptis chinensis decoction (CCD), the particle aggregates in CCD (CCD-Ps), and the water-insoluble active ingredient of Berberine (Ber) as typical examples to investigate the effects of particle aggregates in herbal medicine decoction on the active ingredient absorption in the intestine and the underlying mechanisms. The CCD-Ps are mainly composed of polysaccharide, with commonly features of a hundred-nanometers size and negatively charged. A series of Coptis chinensis polysaccharide (CCP) composed particle aggregates (CCP-Ps) were self-assembled to mimic the CCD-Ps. In situ single-pass intestinal perfusion experiments exhibited that, both the CCD-Ps and CCP-Ps exhibited charge-dependent promotion on Ber absorption in the intestine, through regulating the tight junctions (TJs) between intestinal epithelia cells. Caco-2 cell monolayer model experiments revealed that the particle aggregates not only promoted paracellular Ber transport through TJs regulation but also improved the transcellular Ber transport through active transport and endocytosis. The present study provides a novel viewpoint to explain the scientific implications of herbal medicine decoction, in which the particles aggregated in decoction are not useless but rather act as an effective and important enhancer for adsorption of the active ingredients through multiple mechanisms.

In situ eNOS/NO up-regulation-a simple and effective therapeutic strategy for diabetic skin ulcer.

Decreased nitric oxide (NO) synthesis and increased NO consumption in diabetes induces the inadequate blood flow to tissues that is primarily responsible for the pathogenesis and refractoriness of diabetic skin ulcers. The present study proposed a simple and effective therapeutic strategy for diabetic skin ulcers-in situ up-regulation of endothelial nitric oxide synthase (eNOS) expression and NO synthesis by statin-loaded tissue engineering scaffold (TES). In vitro experiments on human umbilical vein endothelial cells indicated that the statin-loaded TES relieved the high-glucose induced decrease in cell viability and promoted NO synthesis under high-glucose conditions. In a rat model of diabetes, the statin-loaded TES promoted eNOS expression and NO synthesis in/around the regenerated tissues. Subsequently, accelerated vascularization and elevated blood supply were observed, followed by rapid wound healing. These findings suggest that the in situ up-regulation of eNOS/NO by a statin-loaded TES may be a useful therapeutic method for intractable diabetic skin wounds.