RESUMEN
Understanding laser-induced jumping has attracted great interest in nanomaterial launching and transfer but requires a high spatiotemporal resolution visualization. Here, we report a jumping dynamics of nanoplate driven by ultrafast laser-induced stress using time-resolved transmission electron microscopy. Single-shot imaging reveals a nondestructive launching of gold nanoplates in several nanoseconds after the pulsed femtosecond laser excitation. The temperature rise and acoustic vibration, derived from ultrafast electron crystallography with a picosecond time resolution, confirm the existence of a laser-induced elastic stress wave. The generation, propagation, and reflection of thermal stress waves are further clarified by atomic simulation. The nonequilibrium ultrafast laser heating produces a compressive stress wave within several picoseconds, constrained by the supporting substrate under nanoplate to provide thrust force. This compressive stress is subsequently reflected into tensile stress by the substrate, promoting the nanoplate to jump off the substrate. Furthermore, the uneven interface adhesion results in the jumping flip of nanoplates, as well as, diminished their jumping speed. This study unveils the jumping regime driven by impulsive laser-excited stress and offers understanding of light-matter interaction.
RESUMEN
Irreversible ultrafast events are prevalent in nature, yet their capture in real time poses significant challenges. Traditional single-shot imaging technologies, which utilize a single optical pump and single delayed electron probe, offer high spatiotemporal resolution but fail to capture the entire dynamic evolutions. Here, we introduce a novel imaging method employing a single optical pump and delayed multiple electron probes. This approach, facilitated by an innovative deflector in ultrafast electron microscopy, enables the acquisition of nine frames per exposure, paving the way for statistical and quantitative analyses. We have developed an algorithm that corrects frame-by-frame distortions, realizing a cross-correlation enhancement of â¼26%. Achieving â¼12 nm and 20 ns resolution, our method allows for the comprehensive visualization of laser-induced behaviors in Au nanoparticles, including merging, jumping, and collision processes. Our results demonstrate the capability of this multiframe imaging technique to document irreversible processes across materials science and biology with unprecedented nanometer-nanosecond precision.
RESUMEN
The ocean absorbs a significant amount of carbon dioxide (CO2) from the atmosphere, helping regulate Earth's climate. However, our knowledge of ocean CO2 sink levels remains limited. This research focused on assessing daily changes in ocean CO2 sink levels and air-sea CO2 exchange, using a new technique. We used LiDAR technology, which provides continuous measurements during day and night, to estimate global ocean CO2 absorption over 23 years. Our model successfully reproduced sea surface partial pressure of CO2 data. The results suggest the total amount of CO2 absorbed by oceans is higher at night than during the day. This difference arises from a combination of factors like temperatures, winds, photosynthesis, and respiration. Understanding these daily fluctuations can improve predictions of ocean CO2 uptake. It may also help explain why current carbon budget calculations are not fully balanced-an issue scientists have grappled with. Overall, this pioneering study highlights the value of LiDAR's unique day-night ocean data coverage. The findings advance knowledge of ocean carbon cycles and their role in climate regulation. They underscore the need to incorporate day-night variability when assessing the ocean's carbon sink capacity.
RESUMEN
The current study aims to examine how the morphology of ultra-high molecular weight polyethylene (UHMWPE) particles impacts the kinetics of non-isothermal crystallization in high-density polyethylene (HDPE). To prepare blends of HDPE and UHMWPE, melt blending is utilized. High-temperature melting and subsequent shearing are used to cause the morphological changes in UHMWPE particles. The morphological evolution of UHMWPE particles is observed utilizing scanning electron microscopy (SEM). The non-isothermal crystallization kinetics of HDPE with varying UHMWPE morphologies are investigated using the Jeziony and Mo methods. The nucleation activity of UHMWPE particles in HDPE crystallization is assessed using the Dobreva and Gutzow model. Furthermore, the crystallization activation energy of HDPE blends is evaluated using the Friedman model. The results exhibit that after undergoing high-temperature melting, the UHMWPE particles underwent significant morphological changes, leading to enhanced interaction with the two phases and reduced nucleation activity. Additionally, it can increase the crystallization activation energy, which causes a decrease in the HDPE crystallization rate. However, subsequent shearing has crushed the UHMWPE particles into smaller pieces, enhancing their nucleation activity, decreasing the activation energy required for crystallization and increasing the HDPE crystallization rate.
RESUMEN
The attenuation coefficient of natural waters plays a significant role in our understanding of hydrology from both the oceanographic and biological point of view. The advent of near-continuous observations by sophisticated space-based lidars now offers an unprecedented opportunity to characterize attenuation coefficients over open oceans on global and regional scales. At present, however, literature reports of lidar-derived attenuation coefficient estimates (klidar, m-1) in oceanic waters are very limited. In this study, we present a global survey of klidar derived from ATLAS/ICESat-2 nighttime measurements. Our results augment the existing passive sensor ocean color data set with a new diurnal component and extend the record to now include previously unavailable polar nighttime observations. The values of ATLAS measured klidar at 532â nm are between 0.045 and 0.39â m-1 with the higher values (>0.15â m-1) correlated with coastal waters and sea ice covered oceans. The average klidar in clearest oligotrophic ocean gyres is â¼0.058 ± 0.012â m-1 at 532â nm. The results reported here demonstrate the feasibility of using ATLAS/ICESat-2 lidar measurements for global klidar studies, which will in turn provide critical insights that enable climate models to correctly describe the amount of light present under sea ice, and for heat deposition studies in the upper ocean.
RESUMEN
Emission Trading System (ETS) is an innovative practice under the progress of green development in China. It is also an important method for China to achieve market-oriented environmental governance in ecological civilization construction. The ETS pilot policy has implemented for more than 10 years. However, the co-benefits of ETS pilot policy by the integration of energy consumption, carbon and sulfur dioxide emissions, and wastewater has not been evaluated. In order to fill this gap, we use the 2003-2017 annual data of 30 China's provinces (municipalities and autonomous regions), and utilize the Difference-in-Differences (DID) model and Propensity Score Matching (PSM-DID) methodology to evaluate the co-benefits of ETS pilot policy on energy conservation and emission reduction. We find that the ETS pilot policy significantly promote energy conservation and emission reduction. Eastern and central China have significantly benefited from the policy, while the western China has not due to the limited technology and innovation as well as an imbalance of the industrial structure. The results provide the policy reference for China's government and institutions as well as the governments and institutions around the world to fulfill their commitments to save energy and reduce emissions, and early achieve the carbon peaking and carbon neutralization.
RESUMEN
Shipping indices are extremely volatile, non-stationary, unstructured and non-linear, and more difficult to forecast than other common financial time series. Based on the idea of "decomposition-reconstruction-integration", this article puts forward a combined forecasting model CEEMD-PSO-BiLSTM for shipping index, which overcomes the linearity limitation of traditional models. CEEMD is used to decompose the original sequence into several IMF components and RES sequences, and the IMF components are recombined by reconstruction. Each sub-sequence is predicted and analyzed by PSO-BiLSTM neural network, and finally the predicted value of the original sequence is obtained by summing up the predicted values of each sub-sequence. Using six major shipping indices in China's shipping market such as FDI and BDI as test data, a systematic comparison test is conducted between the CEEMD-PSO-BiLSTM model and other mainstream time-series models in terms of forecasting effects. The results show that the model outperforms other models in all indicators, indicating its universality in different shipping markets. The research results of this article can deepen and improve the understanding of shipping indices, and also have important implications for risk management and decision management in the shipping market.
Asunto(s)
Redes Neurales de la Computación , Predicción , Factores de TiempoRESUMEN
Combined lidar and polarimeter retrievals of aerosol, cloud, and ocean microphysical properties involve single-scattering cloud calculations that are time consuming. We create a look-up table to speed up these calculations for water droplets in the atmosphere. In our new Lorenz-Mie look-up table we tabulate the light scattering by an ensemble of homogeneous isotropic spheres at wavelengths starting from 0.35 µm. The look-up table covers liquid water cloud particles with radii in the range of 0.001-500 µm while gaining an increase of up to 104 in computational speed. The covered complex refractive indices range from 1.25 to 1.36 for the real part and from 0 to 0.001 for the imaginary part. We show that we can precisely compute inherent optical properties for the particle size distributions ranging up to 100 µm for the effective radius and up to 0.6 for the effective variance. We test wavelengths from 0.35 to 2.3 µm and find that the elements of the normalized scattering matrix as well as the asymmetry parameter, the absorption, backscatter, extinction, and scattering coefficients are precise to within 1% for 96.7%-100% of cases depending on the inherent optical property. We also provide an example of using the look-up table with in situ measurements to determine agreement with remote sensing. The table together with C++, Fortran, MATLAB, and Python codes to interpolate the complex refractive index and apply different particle size distributions are freely available online.
RESUMEN
Reward is essential for shaping behavior. Using sensory cues to imply forthcoming rewards, previous studies have demonstrated powerful effects of rewards on behavior. Nevertheless, the impact of reward on the sensorimotor transformation, particularly when reward is linked to behavior remains uncertain. In this study, we investigated how reward modulates smooth pursuit eye movements in monkeys. Three distinct associations between reward and eye movements were conducted in independent blocks. Results indicated that reward increased eye velocity during the steady-state pursuit, rather than during the initiation. The influence depended on the particular association between behavior and reward: a faster eye velocity was linked with reward. Neither rewarding slower eye movements nor randomizing rewards had a significant effect on behavior. The findings support the existence of distinct mechanisms involved in the initiation and steady-state phases of pursuit, and contribute to a deeper understanding of how reward interacts with these two periods of pursuit.
RESUMEN
Different ratios of Polylactic acid/Ground tire rubber (PLA/GTR) were prepared by melt blending and adding dicumyl peroxide (DCP) as a reactive compatibilizer. The compatibilizer could initiate a reaction between PLA and GTR to increase the compatibility and interfacial adhesion of the two phases, as indicated by Fourier transform infrared (FTIR) spectrometry and scanning electron microscopy (SEM). Adding the compatibilizer significantly improved the impact strength of the PLA/GTR blends without compromising the tensile strength. The elongation at the break and notched Izod impact strength of the blend increased by 61.8% and 150%, respectively, but there was only a 4.1% decline in tensile strength compared with the neat PLA. The plastic deformation on the impact fractured surface showed that the improvement of toughness could be attributed to the compatibilization initiated by DCP. Therefore, the improvement of the interfacial adhesion and compatibility of the two phases induced a brittle-ductile transition that occurred in the failure of blends. Moreover, the crystallinity of blends reached 40.5% without a further annealing treatment, which was nearly 24 times of the neat PLA, and the crystallization rate was enhanced simultaneously. These exciting findings suggest that compatibilization can provide a promising avenue for fabricating GTR-toughened PLA blends with balanced stiffness-toughness.
RESUMEN
In shallow nearshore waters, seafloor heights and properties can be accurately measured by the current generation of space-based elastic backscatter lidars: CALIOP, flying aboard the CALIPSO satellite and ATLAS aboard ICESat-2. CALIOP's 532 nm volume depolarization ratios, together with the ratios of the attenuated backscatter coefficients measured at 532 nm and 1064 nm, can efficiently distinguish optically shallow waters from nearby land surfaces and deep oceans. ATLAS's high vertical resolution photon measurements can accurately determine seafloor depths in shallow water bodies, characterize seafloor reflectance, and provide assessments of ocean biomass concentrations in the intervening water column. By adding bathymetry, seafloor optical properties (e.g., reflectance, depolarization ratio and attenuated backscatter), and nighttime observations, space lidar measurements obtained in nearshore waters can provide a wealth of unique information to complement existing satellite-based ocean color remote sensing capabilities. The results reported here demonstrate the feasibility of using satellite lidars for nearshore seafloor ecosystem analyses, which in turn provide critical insights for studies of coastal navigation and seabed topography changes due to disasters, as well as the temporal and spatial morphological evolution of coastal systems.
RESUMEN
Although the extensive development model carries China's economy at the forefront of the world, it has brought great environmental pollution problems. The Chinese government hopes to control environmental pollution through green finance and achieve high-quality economic development. Based on the panel data of 30 provinces and cities in China from 2009 to 2019, this paper examines the impact of green finance (GF) on China's high-quality economic development (EQD), environmental pollution (EP), and clean energy production (CEP). In order to study the spatial impact of GF, we put spatial geographic factors into the analysis category, and use the spatial Durbin model to empirically examine the spatial effect of GF on EQD, EP, and CEP. It is found that GF can promote EQD and curb EP in China. However, GF also weakens China's CEP.
Asunto(s)
Desarrollo Económico , Contaminación Ambiental , Ciudades , China , GeografíaRESUMEN
The Advanced Topographic Laser Altimeter System (ATLAS) aboard the Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) has been making very high resolution measurements of the Earth's surface elevation since October 2018. ATLAS uses photomultiplier tubes (PMTs) as detectors in photon counting mode, so that a single photon reflected back to the receiver triggers a detection within the ICESat-2 data acquisition system. However, one characteristic of ICESat-2 detected photons is the possible presence of afterpulses, defined as small amplitude pulses occurring after the primary signal pulse due to photon arrival. The disadvantage of these afterpulses is that they often confound the accurate measurements of low level signals following a large amplitude of signal and can degrade energy resolution and cause errors in pulse counting applications. This paper discusses and summarizes the after-pulsing effects exhibited by the ATLAS PMTs based on on-orbit measurements over different seasons and geographic regions. The potential impacts of these after-pulsing effects on altimetry and ocean subsurface retrievals are discussed.
RESUMEN
The backscattered light from agglomerated debris particles shows that an approximate linear correlation exists between the logarithm of the geometric albedo $ \log(A )$ of polydispersions of agglomerated debris particles and their lidar linear or circular depolarization ratios, $ \unicode{x00B5}_L$ and $ \unicode{x00B5}_C$. The nature of the relationship depends on the complex refractive index of the particles in the distribution. This extension of the Umov law can be used for lidar and radar characterizations by placing constraints on the reflectivity of the particles. It suggests that an approximate inverse relationship exists between the lidar ratio and the lidar depolarization ratios whose scaling parameter depends on the refractive index of the aerosol population.
RESUMEN
We developed a fast and accurate polynomial based atmospheric correction (POLYAC) algorithm for hyperspectral radiometric measurements, which parameterizes the atmospheric path radiances using aerosol properties retrieved from co-located multi-wavelength multi-angle polarimeter (MAP) measurements. This algorithm has been applied to co-located spectrometer for planetary exploration (SPEX) airborne and research scanning polarimeter (RSP) measurements, where SPEX airborne was used as a proxy of hyperspectral radiometers, and RSP as the MAP. The hyperspectral remote sensing reflectance obtained from POLYAC is accurate when compared to Aerosol Robotic Network (AERONET), and Visible Infrared Imaging Radiometer Suite (VIIRS) ocean color products. POLYAC provides a robust alternative atmospheric correction algorithm for hyperspectral or multi-spectral radiometric measurements for scenes involving coastal oceans and/or absorbing aerosols, where traditional atmospheric correction algorithms are less reliable.
RESUMEN
The change in planetary albedo due to aerosol-cloud interactions during the industrial era is the leading source of uncertainty in inferring Earth's climate sensitivity to increased greenhouse gases from the historical record. The variable that controls aerosol-cloud interactions in warm clouds is droplet number concentration. Global climate models demonstrate that the present-day hemispheric contrast in cloud droplet number concentration between the pristine Southern Hemisphere and the polluted Northern Hemisphere oceans can be used as a proxy for anthropogenically driven change in cloud droplet number concentration. Remotely sensed estimates constrain this change in droplet number concentration to be between 8 cm-3 and 24 cm-3 By extension, the radiative forcing since 1850 from aerosol-cloud interactions is constrained to be -1.2 Wâ m-2 to -0.6 Wâ m-2 The robustness of this constraint depends upon the assumption that pristine Southern Ocean droplet number concentration is a suitable proxy for preindustrial concentrations. Droplet number concentrations calculated from satellite data over the Southern Ocean are high in austral summer. Near Antarctica, they reach values typical of Northern Hemisphere polluted outflows. These concentrations are found to agree with several in situ datasets. In contrast, climate models show systematic underpredictions of cloud droplet number concentration across the Southern Ocean. Near Antarctica, where precipitation sinks of aerosol are small, the underestimation by climate models is particularly large. This motivates the need for detailed process studies of aerosol production and aerosol-cloud interactions in pristine environments. The hemispheric difference in satellite estimated cloud droplet number concentration implies preindustrial aerosol concentrations were higher than estimated by most models.
RESUMEN
Every night across the world's oceans, numerous marine animals arrive at the surface of the ocean to feed on plankton after an upward migration of hundreds of metres. Just before sunrise, this migration is reversed and the animals return to their daytime residence in the dark mesopelagic zone (at a depth of 200-1,000 m). This daily excursion, referred to as diel vertical migration (DVM), is thought of primarily as an adaptation to avoid visual predators in the sunlit surface layer1,2 and was first recorded using ship-net hauls nearly 200 years ago3. Nowadays, DVMs are routinely recorded by ship-mounted acoustic systems (for example, acoustic Doppler current profilers). These data show that night-time arrival and departure times are highly conserved across ocean regions4 and that daytime descent depths increase with water clarity4,5, indicating that animals have faster swimming speeds in clearer waters4. However, after decades of acoustic measurements, vast ocean areas remain unsampled and places for which data are available typically provide information for only a few months, resulting in an incomplete understanding of DVMs. Addressing this issue is important, because DVMs have a crucial role in global ocean biogeochemistry. Night-time feeding at the surface and daytime metabolism of this food at depth provide an efficient pathway for carbon and nutrient export6-8. Here we use observations from a satellite-mounted light-detection-and-ranging (lidar) instrument to describe global distributions of an optical signal from DVM animals that arrive in the surface ocean at night. Our findings reveal that these animals generally constitute a greater fraction of total plankton abundance in the clear subtropical gyres, consistent with the idea that the avoidance of visual predators is an important life strategy in these regions. Total DVM biomass, on the other hand, is higher in more productive regions in which the availability of food is increased. Furthermore, the 10-year satellite record reveals significant temporal trends in DVM biomass and correlated variations in DVM biomass and surface productivity. These results provide a detailed view of DVM activities globally and a path for refining the quantification of their biogeochemical importance.
Asunto(s)
Migración Animal , Animales , Océanos y Mares , Comunicaciones por Satélite , Factores de TiempoRESUMEN
Warming in the Arctic is larger than the global average. A primary reason for this Arctic Amplification is the albedo feedback. The contrasting albedo of sea ice and dark melted surface areas is the key component of albedo feedback. Cloud coverage over the changing surface and the response of the clouds to the changing surface conditions will modify the change in planetary albedo when sea ice melts. Space-based lidar measurements provide a unique opportunity for cloud measurements in the Arctic. The response of clouds to the changing sea ice concentration was directly observed. Based on CALIPSO satellite observations of cloud properties, this study found that cloud coverage in ice-free regions in the Arctic linearly increased with the area of ice-free water during the melt seasons in the past 10 years, while sea ice coverage varies significantly year-to-year. The observations suggest that when sea-ice retreats, cloud fraction of the ice-free region remains fixed at nearly 81%. The high cloud coverage over melted areas significantly reduces the albedo feedback. These results indicate that space-based lidar cloud and surface observations of the Arctic can help constrain and improve climate models.
RESUMEN
Retrievals of particulate optical depths and extinction coefficients from the cloud-aerosol lidar with orthogonal polarization (CALIOP) instrument deployed on the CALIPSO satellite mainly rely on a single global mean extinction-to-backscatter ratio, also known as the lidar ratio. However, the lidar ratio depends on the microphysical properties of particulates. An alternative approach is adopted to infer single-layer semi-transparent cirrus optical depths (CODs) over the open ocean that does not rely on an assumed lidar ratio. Instead, the COD is inferred directly from backscatter measurements obtained from the CALIOP lidar in conjunction with collocated sea surface wind speed data obtained from AMSR-E. This method is based on a Gram-Charlier ocean surface reflectance model relating wind-driven wave slope variances to sea surface wind speeds. To properly apply this method, the impact of multiple scattering between the sea surface and ice clouds should be taken into account. We take advantage of the 532 nm cross-polarization feature of CALIOP and introduce an empirical method based on the depolarization change at the sea surface to correct for potential bias in sea surface backscatter caused by whitecaps, bubbles, foam, and multiple scattering. After the correction, the COD can be derived for individual CALIOP retrievals in a single cloud layer over the ocean with this method. The global mean COD was found to be roughly 14% higher than the current values determined by the Version 4 CALIOP extinction retrieval algorithm. This study is relevant to future improvements of CALIOP operational products and is expected to lead to more accurate COD retrievals.
RESUMEN
Ocean color remote sensing is an important tool to monitor water quality and biogeochemical conditions of ocean. Atmospheric correction, which obtains water-leaving radiance from the total radiance measured by satellite-borne or airborne sensors, remains a challenging task for coastal waters due to the complex optical properties of aerosols and ocean waters. In this paper, we report a research algorithm on aerosol and ocean color retrieval with emphasis on coastal waters, which uses coupled atmosphere and ocean radiative transfer model to fit polarized radiance measurements at multiple viewing angles and multiple wavelengths. Ocean optical properties are characterized by a generalized bio-optical model with direct accounting for the absorption and scattering of phytoplankton, colored dissolved organic matter (CDOM) and non-algal particles (NAP). Our retrieval algorithm can accurately determine the water-leaving radiance and aerosol properties for coastal waters, and may be used to improve the atmospheric correction when apply to a hyperspectral ocean color instrument.