RESUMEN
Advanced oxidation processes (AOPs) are the most efficient water cleaning technologies, but their applications face critical challenges in terms of mass/electron transfer limitations and catalyst loss/deactivation. Bipolar electrochemistry (BPE) is a wireless technique that is promising for energy and environmental applications. However, the synergy between AOPs and BPE has not been explored. In this study, by combining BPE with AOPs, we develop a general approach of using carbon nanotubes (CNTs) as electric-field-induced bipolar electrodes to control electron transfer for efficient water purification. This approach can be used for permanganate and peroxide activation, with superior performances in the degradation of refractory organic pollutants and excellent durability in recycling and scale-up experiments. Theoretical calculations, in situ measurements, and physical experiments showed that an electric field could substantially reduce the energy barrier of electron transfer over CNTs and induce them to produce bipolar electrodes via electrochemical polarization or to form monopolar electrodes through a single particle collision effect with feeding electrodes. This approach can continuously provide activated electrons from one pole of bipolar electrodes and simultaneously achieve "self-cleaning" of catalysts through CNT-mediated direct oxidation from another pole of bipolar electrodes. This study provides a fundamental scientific understanding of BPE, expands its scope in the environmental field, and offers a general methodology for water purification.
Asunto(s)
Electrodos , Nanotubos de Carbono , Oxidación-Reducción , Purificación del Agua , Nanotubos de Carbono/química , Purificación del Agua/métodos , CatálisisRESUMEN
The effects of antibiotics, such as tetracycline, sulfamethoxazole, and ciprofloxacin, on functional microorganisms are of significant concern in wastewater treatment. This study observed that Acinetobacter indicus CZH-5 has a limited capacity to remove nitrogen and phosphorus using antibiotics (5 mg/L) as the sole carbon source. When sodium acetate was supplied (carbon/nitrogen ratio = 7), the average removal efficiencies of ammonia-N, total nitrogen, and orthophosphate-P increased to 52.46 %, 51.95 %, and 92.43 %, respectively. The average removal efficiencies of antibiotics were 84.85 % for tetracycline, 39.32 % for sulfamethoxazole, 18.85 % for ciprofloxacin, and 23.24 % for their mixtures. Increasing the carbon/nitrogen ratio to 20 further improved the average removal efficiencies to 72.61 % for total nitrogen and 97.62 % for orthophosphate-P (5 mg/L antibiotics). Additionally, the growth rate and pollutant removal by CZH-5 were unaffected by the presence of 0.1-1 mg/L antibiotics. Transcriptomic analysis revealed that the promoted translation of aceE, aarA, and gltA genes provided ATP and proton -motive forces. The nitrogen metabolism and polyphosphate genes were also affected. The expression of acetate kinase, dehydrogenase, flavin mononucleotide enzymes, and cytochrome P450 contributed to antibiotic degradation. Intermediate metabolites were investigated to determine the reaction pathways.
Asunto(s)
Acinetobacter , Antibacterianos , Nitrógeno , Fósforo , Contaminantes Químicos del Agua , Nitrógeno/metabolismo , Fósforo/metabolismo , Acinetobacter/metabolismo , Acinetobacter/genética , Acinetobacter/efectos de los fármacos , Contaminantes Químicos del Agua/metabolismo , Aerobiosis , Biodegradación Ambiental , Eliminación de Residuos Líquidos/métodos , Aguas ResidualesRESUMEN
Magnetic phosphorous biochar ï¼MPBCï¼ was prepared from Camellia oleifera shells using phosphoric acid activation and iron co-deposition. The materials were characterized and analyzed through scanning electron microscopy ï¼SEMï¼ï¼ X-ray diffractometry ï¼XRDï¼ï¼ specific surface area and pore size analysis ï¼BETï¼ï¼ Fourier infrared spectroscopy ï¼FT-IRï¼ï¼ and X-ray photoelectron spectroscopy ï¼XPSï¼. MPBC had a high surface area ï¼1 139.28 m2·g-1ï¼ and abundant surface functional groupsï¼ and it could achieve fast solid-liquid separation under the action of an external magnetic field. The adsorption behavior and influencing factors of sulfamethoxazole ï¼SMXï¼ in water were investigated. The adsorbent showed excellent adsorption properties for SMX under acidic and neutral conditionsï¼ and alkaline conditions and the presence of CO32- had obvious inhibition on adsorption. The adsorption process conformed to the quasi-second-order kinetics and Langmuir model. The adsorption rate was fastï¼ and the maximum adsorption capacity reached 356.49 mg·g-1. The adsorption process was a spontaneous exothermic reactionï¼ and low temperature was beneficial to the adsorption. The adsorption mechanism was mainly the chemisorption of pyrophosphate surface functional groups ï¼C-O-P bondï¼ between the SMX molecule and MPBC and also included hydrogen bondingï¼ π-π electron donor-acceptor ï¼π-πEDAï¼ interactionï¼ and a pore filling effect. The development of MPBC adsorbent provides an effective way for resource utilization of waste Camellia oleifera shells and treatment of sulfamethoxazole wastewater.
Asunto(s)
Sulfametoxazol , Contaminantes Químicos del Agua , Sulfametoxazol/química , Adsorción , Espectroscopía Infrarroja por Transformada de Fourier , Agua , Contaminantes Químicos del Agua/análisis , Carbón Orgánico/química , Fósforo , Cinética , Fenómenos MagnéticosRESUMEN
This study provides for the first time a systematic understanding of Acinetobacter indicus CZH-5 performance, metabolic pathway and genomic characteristics for aerobic nitrogen (N) and phosphorus (P) removal. Acinetobacter indicus CZH-5 showed promising performance in heterotrophic nitrification aerobic denitrification and aerobic phosphorus removal. Under optimal conditions, the maximum ammonia-N, total nitrogen and orthophosphate-P removal efficiencies were 90.17%, 86.33%, and 99.89%, respectively. The wide tolerance range suggests the strong environmental adaptability of the bacteria. The complete genome of this strain was reconstructed. Whole genome annotation was used to re-construct the N and P metabolic pathways, and related intracellular substance metabolic pathways were proposed. The transcription levels of related functional genes and enzyme activities further confirmed these metabolic mechanisms. N removal was achieved via the nitrification-denitrification pathway. Furthermore, CZH-5 exhibited significant aerobic P uptake, with phosphate diesters as the main species of intracellular P.
Asunto(s)
Acinetobacter , Desnitrificación , Nitrificación , Fósforo , Nitritos , Aerobiosis , Procesos Heterotróficos , Fosfatos , Nitrógeno/metabolismo , GenómicaRESUMEN
Heterojunction structure and ion doping techniques are viable tactics in facilitating the generation and separation of photogenerated electrons and holes in photocatalysis. In the current study, a novel Bi ion-doped MIL-68(In,Bi)-NH2@BiOBr (MIBN@BOB) type-II heterojunction was first synthesized in a one-step solvothermal reaction. Doping of Bi ions not only broadened the light-sensing range but also provided reliable anchor sites for the in situ growth of BiOBr. Meanwhile, the heterostructure supplied new channels for photogenerated carriers, accelerating the transfer and inhibiting the recombination of photogenerated electron-hole. The obtained MIBN@BOB exhibited enhanced photocatalytic performance (91.1%) than MIL-68(In)-NH2 (40.8%) and BiOBr (57.5%) in ciprofloxacin (CIP) degradation under visible light, with excellent reusability. Photocatalysts were characterized in detail, and a series of photoelectrochemical tests were utilized to analyze the photoelectric properties. MIBN@BOB were deduced to conform the electron conduction mechanism of conventional type-II heterojunctions. More importantly, based on the above experiments and density functional theory (DFT) calculation, BiOBr-Bi in MIBN@BOB can serve as the major active sites of CIP enrichment, and â¢O2- and 1O2 generated at the BiOBr interface can react with the adsorbed CIP directly. Lastly, the possible degradation products and pathways of CIP were analyzed by liquid chromatography-tandem mass spectrometry (LC/MS/MS). This study provides a reference for the construction of ion-doping-modified metal-organic framework (MOF)-based heterojunction photocatalysts and their application in antibiotic removal.
RESUMEN
The in situ production of H2O2 by photocatalysis have shown a sustainable strategy for water remediation, but the peroxide evolution capacity are still unsatisfactory. Herein, we ingeniously design oxygen-doped carbon black/zinc indium sulfide (O-CB/ZnIn2S4) composites for photocatalytic production and activation of H2O2 to degrade antibiotics. The rich oxygen dopants and van der walls heterojunction between O-CB and ZnIn2S4 promoted charge transfer, oxygen adsorption and reduction for peroxide generation. The optimized O-CB/ZnIn2S4-2 composites exhibited ultrahigh H2O2 production rate (1985 µmol/g/h) in pure water (pH=7) without sacrificial reagents and aeration assistance, which was 2 times, 3 times, and 12 times higher than CB/ZnIn2S4-2, ZnIn2S4 and O-CB, respectively. Additionally, O-CB/ZnIn2S4-2 composites exhibited considerable amount of OH of 30 µmol/L in 60 min, which was originated from the reduction of innergenerate-H2O2 by photogenerated electrons and direct photolysis. The degradation and quenching experiments shows that the innergenerate-H2O2 contributed to the rapid degradation and deep mineralization of tetracycline antibiotics(tetracycline, oxytetracycline, chlortetracycline hydrochloride). Moreover, intermediates analysis and toxicity estimation further confirm the significant mineralization and toxicity decrease during the degradation of oxytetracycline by O-CB/ZnIn2S4-2. The work provides deep insights into the crucial role of dopants and heterojunction in promoting H2O2 production and activation.
Asunto(s)
Antibacterianos , Oxitetraciclina , Peróxido de Hidrógeno , Oxígeno , PeróxidosRESUMEN
To degrade the antiviral and antimalarial drug chloroquine phosphate (CQP), an oxygen doping MoS2 nanoflower (O-MoS2-230) co-catalyst was prepared by a hydrothermal method to construct an O-MoS2-230 co-catalytic Fenton system (O-MoS2-230/Fenton) without pH adjustment (initial pH 5.4). Remarkable CQP degradation efficiency (99.5 %) could be achieved in 10 min under suitable conditions ([co-catalyst] = 0.2 g L-1, [Fe2+]0 = 70 µM, [H2O2]0 = 0.4 mM) with a reaction rate constant of 0.24 min-1, which was 4.8 times that of MoS2 co-catalytic Fenton system (MoS2/Fenton). Compared to MoS2/Fenton, the system had 1.5 times more Fe2+ (28.4 µM) and showed a 24.0 % increase in H2O2 activation efficiency, reaching 50.0 %. The electron paramagnetic resonance (EPR) determinations and active species trapping experimental data revealed that â¢OH and 1O2 were responsible for CQP degradation. The combination of experiments and density functional theory (DFT) calculation demonstrates that O doping in MoS2 modifies the surface charge distribution, leading to an increase in its conductivity, thus accelerating the Fe3+/Fe2+ cycle and promoting reactive oxygen species (ROS) generation. Furthermore, O-MoS2-230/Fenton system exhibited excellent stability. This work reveals the degradation mechanism of accelerated Fe3+/Fe2+ cycle and abundant ROS in the O-MoS2-230/Fenton system and provides a promising technology for antibiotic pollutant degradation.
RESUMEN
To promote the cycle of Fe2+/Fe3+ in co-catalytic Fenton and enhance mass transfer in an external circulation sequencing batch packed bed reactor (ECSPBR), super-hydrophilicity MoS2 sponge (TMS) modified by tungstosilicic acid (TA) was prepared for efficiently degrading sulfamethoxazole (SMX) antibiotics in aqueous solution. The influence of hydrophilicity of co-catalyst on co-catalytic Fenton and the advantages of ECSPBR were systematically studied through comparative research methods. The results showed that the super hydrophilicity increased the contact between Fe2+ and Fe3+ with TMS, then accelerated Fe2+/Fe3+ cycle. The max Fe2+/Fe3+ ratio of TMS co-catalytic Fenton (TMS/Fe2+/H2O2) was 1.7 times that of hydrophobic MoS2 sponge (CMS) co-catalytic Fenton. SMX degradation efficiency could reach over 90% under suitable conditions. The structure of TMS remained unchanged during the process, and the max dissolved concentration of Mo was lower than 0.06 mg/L. Additionally, the catalytic activity of TMS could be restored by a simple re-impregnation. The external circulation of the reactor was conducive to improving the mass transfer and the utilization rate of Fe2+ and H2O2 during the process. This study offered new insights to prepare a recyclable and hydrophilic co-catalyst and develop an efficient co-catalytic Fenton reactor for organic wastewater treatment.
RESUMEN
Extracellular biodegradation is a promising technology for removing antibiotics and repressing the spread of resistance genes, but the strategy is limited by the low extracellular electron transfer (EET) efficiency of microorganisms. In this work, biogenic Pd0 nanoparticles (bio-Pd0) were introduced in cells in situ to enhance oxytetracycline (OTC) extracellular degradation and the effects of transmembrane proton gradient (TPG) on EET and energy metabolism mediated by bio-Pd0 were investigated. The results indicated that the intracellular OTC concentration gradually decreased with increase in pH due to the simultaneous decreases of OTC adsorption and TPG-dependent OTC uptake. On the contrary, the efficiency of OTC biodegradation mediated by bio-Pd0@B. megaterium showed a pH-dependent increase. The negligible intracellular OTC degradation, the high dependence of OTC biodegradation on respiration chain and the results on enzyme activity and respiratory chain inhibition experiments showed that NADH-dependent (rather than FADH2-dependent) EET process mediated by substrate-level phosphorylation modulated OTC biodegradation due to high energy storage and proton translocation capacity. Moreover, the results showed that altering TPG is an efficient approach to improve EET efficiency, which can be attributed to the increased NADH generation by the TCA cycle, enhanced transmembrane electron output efficiency (as evidenced by increased intracellular electron transfer system (IETS) activity, the negative shift of onset potential, and enhanced one-electron transfer through bound flavin) and stimulation of substrate-level phosphorylation energy metabolism catalyzed by succinic thiokinase (STH) under low TPG conditions. The results of structural equation model that OTC biodegradation was directly and positively modulated by the net outward proton flux as well as STH activity, and indirectly regulated by TPG through NADH level and IETS activity confirmed the previous findings. This study provides a new perspective for engineering microbial EET and application of bioelectrochemistry processes in bioremediation.
Asunto(s)
Nanopartículas del Metal , Oxitetraciclina , Oxitetraciclina/metabolismo , Paladio , Protones , Biodegradación Ambiental , NAD , Estudios de FactibilidadRESUMEN
An internal loop airlift reactor was constructed with zeolite spheres as biofilm carriers (ZS-ALR), and the performance and mechanism of nitrogen removal were investigated. The results indicated that the TN, NH4+-N and TOC removal efficiencies of ZS-ALR reached 96.12%, 100% and 94.54% under appropriate conditions (HRT of 6-8 h, aeration rates of 80-120 mL/min, C/N ratios of 4-6), and the highest TN removal rate constant was 0.01156 min-1. Further investigating the influence of ammonia-N concentrations on nitrogen removal and biofilm stability revealed that catabolism was important in TN removal, and the prominent genera for nitrogen removal included Sphaerotilus (42.20%), Flavobacterium (17.47%) and Fusibacter (6.14%). Meanwhile, the abundance of amoA, napA, narG and nosZ genes was markedly influenced by ammonia-N concentrations. The nitrogen removal of ZS-ALR was mainly through ammonia-N adsorption by zeolite spheres and simultaneous nitrification and denitrification by biofilm.
Asunto(s)
Nitrificación , Zeolitas , Desnitrificación , Amoníaco/metabolismo , Reactores Biológicos/microbiología , Nitrógeno , Biopelículas , Eliminación de Residuos Líquidos/métodosRESUMEN
This study reported a novel application of Mn0.67Fe0.33-MOF-74 with two-dimensional (2D) morphology grown on carbon felt as a cathode for efficiently removing antibiotic sulfamethoxazole in the heterogeneous electro-Fenton system. Characterization demonstrated the successful synthesis of bimetallic MOF-74 by a simple one-step method. Electrochemical detection showed that the second metal addition and morphological change improved the electrochemical activity of the electrode and contributed to pollutant degradation. At pH 3 and 30 mA of current, the degradation efficiency of SMX reached 96% with 12.09 mg L-1 H2O2 and 0.21 mM ·OH detected in the system after 90 min. During the reaction, electron transfer between ≡FeII/III and ≡MnII/III promoted divalent metal ions regeneration, which ensured the continuation of the Fenton reaction. Two-dimensional structures exposed more active sites favoring ·OH production. The pathway of sulfamethoxazole degradation and the reaction mechanisms were proposed based on the intermediates identification by LC-MS and radical capture results. High degradation rates were still observed in tap and river water, revealing the potential of Mn0.67Fe0.33-MOF-74@CF for practical applications. This study provides a simple MOF-based cathode synthesis method, which enhances our understanding of constructing efficient electrocatalytic cathodes based on morphological design and multi-metal strategies.
Asunto(s)
Sulfametoxazol , Contaminantes Químicos del Agua , Manganeso , Hierro/química , Peróxido de Hidrógeno/química , Oxidación-Reducción , Electrodos , Contaminantes Químicos del Agua/análisisRESUMEN
With the aim of addressing the difficult problem of biodegradable organic nitrogen in biochemical effluent of a printing and dyeing industrial park, the combined ozonation-sequencing batch biofilm reactor (O3-SBBR) process was used for advanced treatment. The influencing factors and degradation kinetics were analyzed; quenching experiments were carried out; and the types of free radicals, succinate dehydrogenase activity, and denitrification function genes were determined. The results showed that the suitable ozonation condition was pH 8.0-8.5, O3 concentration was approximately 35.0 mg·L-1, O3 dosage was approximately 100.0 mg·L-1, and reaction time was 90.0-120.0 min. Organic nitrogen in the biochemical effluent by ozonation conformed to the pseudo first-order kinetic model, and the maximum rate constant k was 0.01035 min-1 (experimental conditions:pH 8.0, ozone dosage 150.0 mg·L-1, and ozone concentration 35.0 mg·L-1). Ozonation significantly improved the denitrification performance of the sequencing biofilm batch reactor (SBBR), and the denitrification efficiency increased from 19.8% (SBBR) to 32.9% (O3-SBBR). Ozonation could convert organic nitrogen and organic substances with strong toxicity and difficult biological utilization into small molecular substances with low toxicity and biodegradability. The abundance of functional genes (nirS, nirK, and nor) in the O3-SBBR combined process was significantly higher than that in the single SBBR, which further confirmed that ozonation could improve the nitrogen removal performance of SBBR. The operation cost of the combined process was 0.74-1.07 yuan·m-3, with good technical economy. This study provided a basis for the application of the O3-SBBR combined process in the advanced treatment of biochemical effluent in printing and dyeing industrial parks.
Asunto(s)
Ozono , Contaminantes Químicos del Agua , Aguas Residuales , Ozono/química , Biopelículas , Nitrógeno , Impresión Tridimensional , Contaminantes Químicos del Agua/análisisRESUMEN
To address the difficulty of precisely regulating the two-electron oxygen reduction reaction (2e-ORR) and investigate the synergistic effect of hydrogen peroxide (H2O2) and peroxymonosulfate (PMS), a heterogeneous electro-catalyst was synthesized via carbonation of boron (B) and sulfur (S) co-doping electrospun nanofibers containing iron and cobalt (B, S-Fe/Co@C-NCNFs-900), and used to degrade levofloxacin (Levo) in the electro-activating PMS with self-made cathode material (E-cathode-PMS) system. The morphological, structural, and electrochemical characteristics have been investigated. The results showed that B and S co-doping could remarkably enhance electron transfer and manage two-electron oxygen reduction, which was more favorable for H2O2 generation. Levo degradation efficiency could reach 99.63% with a reaction rate of 0.3056 min-1 in 20 min under the appropriate conditions (pH = 4, current = 20 mA, and [PMS] = 8.0 mM). The steady-state concentration of singlet oxygen (1O2) was calculated to be 669.17 × 10-14 M, which was 15.42, 29.74, and 45.00 times respectively than that of HO2·/O2·- (43.40 × 10-14 M), ·OH (22.25 × 10-14 M) and SO4-·(14.87 × 10-14 M), signifying that 1O2 was the predominant reactive oxygen species (ROS) involved in Levo removal. The high TOC removal (74.19%), low energy consumption (0.14 kWh m-3 order-1), few intermediates toxicity, and excellent Levo degradation efficiency for complex wastewater with various anions and matrixes showed the prospective practical applications of the E-cathode-PMS system. Overall, this study provides a useful strategy to regulate and control the 2e-ORR pathway.
Asunto(s)
Nanofibras , Contaminantes Químicos del Agua , Carbono/química , Peróxido de Hidrógeno/química , Levofloxacino , Aguas Residuales , Boro , Especies Reactivas de Oxígeno , Oxígeno Singlete , Estudios Prospectivos , Contaminantes Químicos del Agua/química , Oxidación-Reducción , Peróxidos/química , Electrodos , Hierro/química , Azufre , Cobalto , OxígenoRESUMEN
In order to accelerate Fe3+/Fe2+ cycle and boost singlet oxygen (1O2) generation in peroxymonosulfate (PMS) Fenton-like system, a co-catalyst of defect MoS2 was prepared by C doping and C2-MoS2/Fe3+/PMS system was structured. The removal efficiency of sulfadiazine (SDZ) antibiotics was nearly 100 % in 10 min in the system under the appropriate conditions ([co-catalysts] = 0.2 g/L, [PMS] = 0.1 mM, [Fe3+] = 0.4 mM, pH 3.5), and the reaction rate constant was 4.6 times that of Fe3+/PMS system. C doping MoS2 could induce phase transition, yield more sulfur defects, and expedite electron transfer. Besides, exposed Mo4+ sites on C2-MoS2 could significantly enhance the regeneration and stability of Fe2+ and further promote the activation of PMS. ·OH, SO4·-, and 1O2 were responsible for SDZ degradation in the system. Notably, 1O2 generation was efficiently promoted by sulfur defects and CO sites on C2-MoS2, and 1O2 played the main role in SDZ degradation. Therefore, this co-catalytic system exhibited great anti-interference and stability, and organic contaminants could be efficiently and stably degraded in a 14-day long-term experiment. This work provides a new approach for improving the co-catalytic performance of MoS2 for Fe3+ mediated Fenton-like technology, and offers a promising antibiotic pollutant removal strategy.
Asunto(s)
Carbono , Molibdeno , Sulfadiazina , AzufreRESUMEN
In this study, A Acinetobacter pittii sp. was isolated with high efficiency for heterotrophic nitrification and aerobic denitrification (HN-AD). The boundary conditions for total nitrogen (TN) removal were as follows: C/N ratios 8-14, temperature 25-35 °C, initial pH 7-9, and shaker speed 100-120 rpm. Addition of mixed carbon resources achieved 97.38 % ammonia-N and 91.50 % TN removal, which was higher than that of the group with sole carbon resources. The ammonia-N and TN removal profiles matched well with first-order kinetics in the rapid response period and zero-order kinetics in the slow reaction period. Meanwhile, enzyme activity related to nitrogen conversion would remarkably increase with mixed carbon resources. Furthermore, proposed a possible relationship between the solid carbon source, hydrolysis, soluble small molecule organic matter, microbial activity, and heterotrophic nitrification and aerobic denitrification (HN-AD). This study provides a new strategy for improving nitrogen removal in wastewater with low-carbon resources.
Asunto(s)
Acinetobacter , Nitrificación , Desnitrificación , Aguas Residuales/química , Carbono , Amoníaco , Aerobiosis , Procesos Heterotróficos , Nitrógeno/análisis , NitritosRESUMEN
Here, we report a novel amino-modified mesoporous-structured aluminum-based metal-organic framework adsorbent, MIL-68(Al)/MCM-41-NH2, for dye sewage treatment. The introduction of molecular sieves overcomes the inherent defects of microporous MOFs in contaminant transfer and provides more active sites to enhance adsorption efficiency. Compared with using organic amino ligands directly, this strategy is ten times cheaper. The composite was well characterized and analyzed in terms of morphology, structure and chemical composition. Batch experiments were carried out to study the influences of essential factors on the process, such as pH and temperature. In addition, their interactions and the optimum conditions were examined using response surface methodology (RSM). The adsorption kinetics, isotherms and thermodynamics were systematically elucidated. In detail, the adsorption process conforms to pseudo-second-order kinetics and follows the Sips and Freundlich isothermal models. Moreover, the maximum adsorption capacity Qs of methyl orange (MO) was 477 mg g-1. It could be concluded that the process was spontaneous, exothermic, and entropy-reducing. Several binary dye systems have been designed for selective adsorption research. Our material has an affinity for anionic pigments. The adsorption mechanisms were discussed in depth. The electrostatic interaction might be the dominant effect. Meanwhile, hydrogen bonding, π-π stacking, and pore filling might be important driving forces. The excellent thermal stability and recyclability of the adsorbent are readily noticed. After five reuse cycles, the composite still possesses a removal efficiency of 90% for MO. Overall, the efficient and low-cost composite can be regarded as a promising adsorbent for the selective adsorption of anionic dyes from wastewater.
Asunto(s)
Estructuras Metalorgánicas , Contaminantes Químicos del Agua , Adsorción , Aluminio/química , Compuestos Azo , Colorantes , Concentración de Iones de Hidrógeno , Cinética , Aguas del Alcantarillado , Dióxido de Silicio , Aguas Residuales , Contaminantes Químicos del Agua/análisisRESUMEN
Doxycycline hydrochloride (DCH) could be continuously removed by Bacillus thuringiensis S622 with the in-situ biogenic manganese oxide (BioMnOx) via oxidizing/regenerating. The DCH removal rate was significantly increased by 3.01-fold/1.47-fold at high/low Mn loaded via the integration of biological (intracellular/extracellular electron transfer (IET/EET)) and abiotic process (BioMnOx, Mn(III) and â¢OH). BioMnOx accelerated IET via activating coenzyme Q to enhance electrons transfer (ET) from complex I to complex III, and as an alternative electron acceptor for respiration and provide another electron transfer transmission channel. Additionally, EET was also accelerated by stimulating to secrete flavins, cytochrome c (c-Cyt) and flavin bounded with c-Cyt (Flavins & Cyts). To our best knowledge, this is the first report about the role of BioMnOx on IET/EET during antibiotic biodegradation. These results suggested that Bacillus thuringiensis S622 incorporated with BioMnOx could adopt an alternative strategy to enhance DCH degradation, which may be of biogeochemical and technological significance.
Asunto(s)
Bacillus thuringiensis , Electrones , Doxiciclina , Flavinas , Compuestos de Manganeso , Oxidación-Reducción , ÓxidosRESUMEN
Microbial electron output capacity is critical for organic contaminants biodegradation. Herein, original C. freundii JH could oxidate formate in anaerobic respiration, but lack the ability to degrade sulfamethoxazole (SMX). While the incorporation of Pd(0) could effectively improve the electron output via improving the combination between flavins and c-type cytochromes (c-Cyts), increasing the activities of key enzymes (formate dehydrogenase, hydrogenase, F0F1-ATPases), etc. More importantly, the presence of Pd(0) caused the NADH dehydrogenase (complex I) nearly in idle, and triggered the decrease of NADH/NAD+ ratio and increase of H+-efflux transmembrane gradient, eventually resulting in the electrons diverting from CoQ-involved long respiratory chain (decreasing from 91.67% to 36.25%) to FDH/Hases-based hydrogen-producing short chain (increasing from 22.44% to 84.88%), which further intensified the electron output. Above changes effectively launched and guaranteed the high-level SMX degradation by palladized C. freundii JH, alleviating the ecotoxicity of SMX in aquatic and terrestrial environments. These conclusions provided the new view to regulate the microbial electron output behaviors.
Asunto(s)
Formiato Deshidrogenasas , Hidrogenasas , Adenosina Trifosfatasas/metabolismo , Citocromos/metabolismo , Transporte de Electrón , Electrones , Flavinas/metabolismo , Formiato Deshidrogenasas/metabolismo , Formiatos , Hidrógeno/metabolismo , Hidrogenasas/metabolismo , NAD/metabolismo , NADH Deshidrogenasa/metabolismo , Sulfametoxazol/metabolismoRESUMEN
In this work, bio-microcapsules were prepared by embedding heterotrophic nitrification and aerobic denitrification (HN-AD) bacteria (Acinetobacter Pittii SY9) and corn cob. Bio-microcapsules (20 g/L of corn cob and 30% v/v suspension of strain SY9) were porous (pore size 2579.74-3725.44 nm; porosity 53.6%-79.9%). Under the appropriate conditions (C/N > 2, temperature of 20-35 â, rotation speed of 100-120 rpm, pH of 7-9), TN removal efficiency of bio-microcapsules reached 94.4%, and 74.0% of nitrogen was converted into N2. The results of kinetics fitting indicated that aerobic denitrification was the limiting step during HN-AD process. Bio-microcapsules could slow the carbon release of corn cob for 120 days, which ensuring high HN-AD performance even at low C/N of 2.8. Bio-microcapsule SBR could stably run for 88 days with TN removal efficiency > 90% for synthetic sewage. Bio-microcapsules embedding strain SY9 and corn cob have prospective applications for enhancing denitrification of sewage.
Asunto(s)
Acinetobacter , Nitrificación , Aerobiosis , Bacterias Aerobias , Cápsulas , Desnitrificación , Procesos Heterotróficos , Nitritos , Nitrógeno , Aguas del Alcantarillado/microbiología , Zea maysRESUMEN
Catalytic ozonation has prospects in the advanced treatment of nitrogen removal, and solid base MgO can efficiently catalyze the ozonation of ammonium nitrogen. However, it is necessary to improve the problem of easy loss, difficult recovery, and low percentage of gaseous products. Here, MgO, amorphous Fe2O3, and γ-Al2O3 were selected as doping components and supports, respectively, to prepare γ-Al2O3@Fe/Mg composite catalysts with abundant acidic-basic sites and oxygen vacancies. The results show that γ-Al2O3@Fe/Mg5 can efficiently catalyze the ozonation of ammonium nitrogen (98.73%) with 67.82% gaseous product selectivity under the conditions of initial pH = 7, catalyst dosage of 112.88 g/L, and ozone dosage of 2.4 mg/min. The doping of Fe2O3 and MgO with a weaker lattice oxygen binding energy improves the gaseous product selectivity. The mechanism of ammonium nitrogen removal for γ-Al2O3@Fe/Mg5 is revealed, especially the intrinsic contribution of acidic-basic sites and oxygen vacancies. The pH and active sites play different roles in ozone decomposition for NH4+ removal. Surface hydroxyl protonation on basic sites and oxygen vacancies and electron transfer on acidic sites are responsible for ozone decomposition to hydroxyl radicals. Moreover, γ-Al2O3@Fe/Mg5 exhibits good stability, few leaching ions, and can be settled in water for easy recovery. This study suggests that γ-Al2O3@Fe/Mg5 is a good candidate for the catalytic ozonation of ammonium nitrogen.