Non-invasive imaging using a low-spatial-coherence multimode random polymer fiber laser.

Random lasers (RLs), with their low spatial coherence, are ideal illumination sources for speckle-free imaging. However, it is still challenging for RLs to maintain low spatial coherence with the need for integration and directionality. Here, a disordered multimode random polymer fiber laser (RPFL) is proposed and implemented as a low-spatial-coherence light source. Compared to typical multimode optical fibers, the number of accommodated modes is increased by about 11×, the speckle contrast is reduced to 0.013, and the spatial coherence factor is reduced to 0.08. The low-spatial-coherence property enables RPFL to produce significantly superior imaging quality in both speckle-free imaging and non-invasive imaging through opacity. This study provides a strategy for an integrated speckle-free imaging system and paves the way for non-invasive imaging.

Laser Fabrication of Multi-Dimensional Perovskite Patterns with Intelligent Anti-Counterfeiting Applications.

Perovskites have gained widespread attention across various fields such as photovoltaics, displays, and imaging. Despite their promising applications, achieving precise and high-quality patterning of perovskite films remains a challenge. In this study, femtosecond laser direct writing technology is utilized to achieve rapid and highly precise micro/nanofabrication on perovskites. The study successfully fabricates multiple structured and emission-tunable perovskite patterns composed of A2(FA)n-1PbnX3n+1 (A represents a series of long-chain amine cations, and X = Cl, Br, I), encompassing 2D, quasi-2D, and 3D structures. The study delves into the intricate interplay between fabrication technology and the growth of multi-dimensional perovskites: higher repetition rates, coupled with appropriate laser power, prove more conducive to perovskite growth. By employing precise halogen element design, the simultaneous generation of two distinct color quick-response (QR) code patterns is achieved through one-step laser processing. These mirrored QR codes offer a novel approach to anti-counterfeiting. To further enhance anti-counterfeiting capabilities, artificial intelligence (AI)-based methods are introduced for recognizing patterned perovskite anti-counterfeiting labels. The combination of deep learning algorithms and a non-deterministic manufacturing process provides a convenient means of identification and creates unclonable features. This integration of materials science, laser fabrication, and AI offers innovative solutions for the future of security features.

Experimental evidence on the feasibility of employing a replica symmetry breaking classification random laser.

Replica symmetry breaking (RSB) has been introduced in a random laser to investigate the interactions between disorder and fluctuations. In this work, the dynamic difference between four non-energy transfer and Förster resonance energy transfer (FRET)-assisted random laser systems is investigated based on RSB. It is found that FRET is one of the key factors influencing RSB, and it is demonstrated that RSB in a random laser is not robust. This dynamic difference can be attributed to the different disorders induced by the gain mechanism in different random laser systems. This provides experimental evidence and theoretical support for the classification feasibility of RL with different emission mechanisms employing RSB.

Observation of the photonic Hall effect and photonic magnetoresistance in random lasers.

Modulation of scattering in random lasers (RLs) by magnetic fields has attracted much attention due to its rich physical insights. We fabricate magnetic gain polymer optical fiber to generate RLs. From macroscopic experimental phenomena, with the increase of the magnetic field strength, the magnetic transverse photocurrent exists in disordered multiple scattering of RLs and the emission intensity of RLs decreases, which is the experimental observation of photonic Hall effect (PHE) and photonic magnetoresistance (PMR) in RLs. At the microscopic level, based on the field dependence theory of magnetic disorder in scattered nanoparticles and the replica symmetry breaking theory, the magnetic-induced transverse diffusion of photons reduces the scattering disorder, and then decreases the intensity fluctuation disorder of RLs. Our work establishes a connection between the above two effects and RLs, visualizes the influence of magnetic field on RL scattering at the microscopic level, which is crucial for the design of RLs.

Voltage, thermal and magnetic field fiber sensors based on magnetic nanoparticles-doped photonic liquid crystal fibers.

In this article, highly sensitive voltage, thermal and magnetic field fiber sensors were obtained in magnetic nanoparticles-doped E7 liquid crystals filled into photonic crystal fibers (PLCF). The voltage and temperature sensitivity reached at 12.598 nm/V and -3.874 nm/°C, respectively. The minimum voltage response time is 48.2 ms. The phase transition temperature Tc of liquid crystal with magnetic dopant was reduced from 60 °C to 46 °C. The magnetic field sensor based on magnetic nanoparticles-doped PLCF were obtained with sensitivity of 118.2 pm/mT from 400 to 460 mT.

Metal-organic framework-based self-healing hydrogel fiber random lasers.

Metal-organic frameworks (MOFs), which have well-defined nanoporous skeletons and whose natural structure can work as optical resonant cavities, are emerging as ideal platforms for constructing micro/nanolasers. However, lasing generated from the light oscillating inside a defined MOFs' cavity usually suffers the drawback of the lasing performance being difficult to maintain once the cavity is destroyed. In this work, we report a MOF-based self-healing hydrogel fiber random laser (MOF-SHFRL) that can withstand extreme damage. The optical feedback of MOF-SHFRLs does not depend on the light reflection inside the MOF cavity but comes from the multiple scattering effects from the MOF nanoparticles (NPs). The hydrogel fiber's one-dimensional waveguide structure also permits confined directional lasing transmission. Based on such an ingenious design, a robust random lasing is achieved without worrying about the destruction of the MOF NPs. More interestingly, the MOF-SHFRL demonstrates excellent self-healing ability without any external stimulation: it can fully recover its initial morphology and lasing performance even when totally broken (e.g., cut into two parts). The lasing threshold also remains stable, and the optical transmission capability can recover by more than 90% after multiple breaks and self-healing processes. These results indicate that the MOF-SHFRL is a highly stable optical device that can be expected to play a significant role in environmental monitoring, intelligent sensing, and other aspects under extreme conditions.

Performance evaluation of plastic optical fiber communication using micro-lens coupling and computational temporal ghost imaging algorithm.

Plastic optical fiber communication (POFC) systems are particularly sensitive to signal performance and power budget. In this paper, we propose what we belive to be a novel scheme to jointly enhance the bit-error-ratio (BER) performance and coupling efficiency for multi-level pulse amplitude modulation (PAM-M) based POFC systems. The computational temporal ghost imaging (CTGI) algorithm is developed for PAM4 modulation for the first time to resist the system distortion. The simulation results reveal that enhanced BER performance and clear eye diagrams are acquired by using CTGI algorithm with an optimized modulation basis. Experimental results also investigate and show, with CTGI algorithm, the BER performance for 180 Mb/s PAM4 signals is enhanced from 2.2 × 10-2 to 8.4 × 10-4 over 10 m POF by using a 40 MHz photodetector. The POF link is equipped with micro-lenses at its end faces by using a ball-burning technique, which helps to increase the coupling efficiency from 28.64% to 70.61%. Both simulation and experimental results show that the proposed scheme is feasible to achieve a cost-effective and high-speed POFC system with short reach.

Excitation-Wavelength-Dependent Luminescence of Chemically and Physically Mixed Europium and Terbium Phosphonates: Color-Tunable Luminescence, Near-White-Light Emission, and Selective Fe3+ Detection.

Molecular lanthanide phosphonates [Ln2 (H3 tpmm)2 (H2 O)6 ] ⋅ xH2 O (Ln=Eu, EuP; Ln=Tb, TbP) were synthesized. Single-crystal X-ray diffraction confirmed that EuP has a sandwich-like dinuclear structure, in which the Eu(III) center adopts a {EuO8 } distorted dodecahedral geometry. XRPD patterns prove that TbP and EuP are isomorphous and isostructural. EuP and TbP are highly thermally stable approaching 450 °C and exhibit red- and green-light emissions from the characteristic 4 f-4 f transition of the Eu3+ and Tb3+ , respectively. Interestingly, luminescence modulation is achieved for the chemically mixed Eu/Tb phosphonate analogues, c-Eux Tb2 -x P (x=1.5, 1, 0.5), and physically mixed Eu/Tb phosphonate materials, p-yEuP : zTbP (y : z=3 : 1, 1 : 1, 1 : 3), with varying the excitation wavelength. Of particular note, near-white-light emission is also achieved for c-EuTbP, p-EuP : TbP, and p-EuP : 3TbP when excited at 365 nm. Therefore, these dinuclear molecular lanthanide phosphonates emitting excitation wavelength and Eu3+ : Tb3+ ratio dependent luminescence might be potential candidates for color-tunable luminescence materials and white-light-emitting materials. On the other hand, the bright green-light emission makes TbP to be an excellent reusable luminescence sensor for selective detection of Fe3+ with Stern-Volmer quenching constant (KSV ) of 9.66×103  M-1 and detection limit (DL) of 0.42 µM through absorption competition caused luminescence quenching effect.

Correction: Liquid crystal random lasers.

Correction for 'Liquid crystal random lasers' by Guangyin Qu et al., Phys. Chem. Chem. Phys., 2023, 25, 48-63, https://doi.org/10.1039/D2CP02859J.

Liquid crystal random lasers.

The enthusiasm for research on liquid crystal random lasers (LCRLs) is driven by their unusual optical properties and promising potential for broad applications in manufacturing, communications, medicine and entertainment. From this perspective, we will summarize the most attractive advances in the development of LCRLs in the last decade and propose future prospects. This article will begin with a fundamental description of LCRLs, including the principle of laser generation and a description of LC substances. Then, we spend several chapters on the lasing performance control methods of LCRLs, including random lasing wavelength, threshold, and polarization properties. In addition, we analyze how the LC chiral agent structures, LC core-shell structures and new light-amplifying materials affect the design of LCRL devices. In the last chapter, we discuss the application of LCRLs in 3D displays, information encryption, biochemical sensing and other optoelectronics devices and finally end the perspective with LCRLs' likely directions in future research.

Ultra-low dark current back-illuminated AlGaN-based solar-blind ultraviolet photodetectors with broad spectral response.

A high performance AlGaN-based back-illuminated solar-blind ultraviolet (UV) p-i-n photodetectors (PDs) are fabricated on sapphire substrates. The fabricated PD exhibits ultra-low dark current of less than 0.15 pA under -5 V bias, which corresponds to a dark current density of <1.5×10-11 A/cm2. In particular, the PD shows broad spectral response from 240 nm to 285 nm with an excellent solar-blind/UV rejection ratio of more than 103. The peak responsivity at the wavelength of 275 nm reaches 0.19 A/W at -5 V, corresponding to a maximum quantum efficiency of approximately 88%. Based on the absence of any anti-reflection coating, this corresponds to nearly 100% internal quantum efficiency. In addition, the PD shows a quite fast response of 0.62 ms. To the best of our knowledge, this is the record low dark current density and broadest response band reported for the back-illuminated AlGaN-based solar-blind UV detectors.

Christiansen filters realized with cylindrical lenses of even symmetry.

A type of Christiansen filter that takes the form of a smooth cylindrical lens of even symmetry is proposed. By varying the shape of the lens, the filter can be made to realize many common filtering responses, including the polynomial function response, the Gaussian function response, and the sinc function response. A systematic design technique based on inverse scattering is established, and a desired, prescribed response can be tailored by properly shaping the lens of the filter. Three prototypical Christiansen filters, namely, a second-order all-real-roots filter, a second-order sinc filter, and a Gaussian filter, are synthesized using the proposed method. A prescribed response at 545 nm with a FWHM of 2 nm is achieved systematically by all of the three Christiansen filters.

Coherent laser detection of the femtowatt-level frequency-shifted optical feedback based on a DFB fiber laser.

The theoretical basis and experimental realization of an all-fiber self-mixing laser Doppler velocimetry based on frequency-shifted feedback in a distributed feedback (DFB) fiber laser are presented, which employs a pair of fiber-coupled acousto-optic modulators to adjust the modulation intensity and frequency of the laser self-mixing effect. Moreover, the minimum optical feedback intensity for the velocity signal successfully measured by the interferometer is 5.12 fW, corresponding to 0.16 photons per Doppler cycle. The results demonstrate that the proposed scheme can adapt to the non-contact measurement requirements of the wide-range speed and weak feedback level in the complex environment.

Multi-wavelength coherent random laser in bio-microfibers.

In this paper, pure silk protein was extracted from Bombyx mori silks and fabricated into a new kind of disordered bio-microfiber structure using electrospinning technology. Coherent random lasing emission with low threshold was achieved in the silk fibroin fibers. The random lasing emission wavelength can be tuned in the range of 33 nm by controlling the pump location with different scattering strengths. Therefore, the bio-microfiber random lasers can be a wide spectral light source when the system is doped with a gain or energy transfer medium with a large fluorescence emission band. Application of the random lasers of the bio-microfibers as a low-coherence light source in speckle-free imaging had also been studied.

Spray coated perylenebisimide/polymer film with controllable molecular aggregation state and emission properties.

Dye doped organic thin films with controllable molecular aggregation and emission properties are of broad interest to the scientific community owing to their large number of potential applications in physics, chemistry, and materials science. Here, a spray coating method was used to prepare perylenebisimides (PBI) doped polymer films. In this study, the effects of the dye concentration, polymer matrix, solvent, and casting process on the optical properties of the resulting films were studied. The aggregation of the PBI into monomer, dimer, and oligomer forms, was rapidly and simply controlled based on the concentration dependence of PBI. The molecular aggregation mechanism in the film forming process for PBI doped polystyrene (PS) was further analyzed by computer simulations. The blends rapidly reached their lowest Gibbs free energy owing to the "frozen" polymer chains and confinement of PBI, molecules with different aggregation states. Therefore, the PBIs/PS films prepared under different conditions had different fluorescent lifetimes and absolute quantum yields. Narrow emission, amplified spontaneous emission (ASE) and random lasing (RL) were observed in PBI doped PS films when photo-pumped at 532 nm in transmittance and waveguide modes, respectively. A lower ASE and RL threshold were obtained for PS films doped with monomeric PBI than those in other aggregation states. Moreover, the solvent use in film deposition greatly influenced the emission properties of the PS films by altering their microstructures. These results indicate potential applications for spray coated dye/polymer films in organic solid-state lasers.

Biofluidic Random Laser Cytometer for Biophysical Phenotyping of Cell Suspensions.

Phenotypic profiling of single floating cells in liquid biopsies is the key to the era of precision medicine. A random laser in biofluids is a promising tool for the label-free characterization of the biophysical properties as a result of the high brightness and sharp peaks of the lasing spectra, yet previous reports were limited to the random laser in solid tissues with dense scattering. In this report, a random laser cytometer is demonstrated in an optofluidic device filled with gain medium and human breast normal/cancerous cells. The multiple lightscattering event induced by the microscale human cells promotes random lasing and influences the lasing properties in term of laser modes, spectral wavelengths, and lasing thresholds. A sensing strategy based on analyzing the lasing properties is developed to determine both the whole cell and the subcellular biophysical properties, and the malignant alterations of the cell suspensions are successfully detected. Our results provide a new approach to designing a label-free biophysical cytometer based on optofluidic random laser devices, which is advantageous for further research in the field of random laser bioapplication.

Weak feedback assisted random fiber laser from 45°-tilted fiber Bragg grating.

We have demonstrated the realization of a high-polarization random fiber laser (RFL) output based on the hybrid Raman and Erbium gain with the tailored effect provided by a 45°-tilted fiber Bragg grating (45°-TFBG), revealing an improvement in the polarization extinction ratio (PER) and achieving a PER of ~15.3 dB. The hybrid RFL system incorporating the 45°-TFBG has been systematically characterized. The random lasing wavelength can be fixed under the extremely weak feedback effect of the 45°-TFBG with reflectivity of 0.09%. In addition, numerical simulation has verified that the weak feedback can boost the random lasing emission with fixed wavelength using a power balance model, which is in good accordance with the experiment results.

Experimental observation of wave localization at the Dirac frequency in a two-dimensional photonic crystal microcavity.

Trapping light within cavities or waveguides in photonic crystals is an effective technology in modern integrated optics. Traditionally, cavities rely on total internal reflection or a photonic bandgap to achieve field confinement. Recent investigations have examined new localized modes that occur at a Dirac frequency that is beyond any complete photonic bandgap. We design Al2O3 dielectric cylinders placed on a triangular lattice in air, and change the central rod size to form a photonic crystal microcavity. It is predicted that waves can be localized at the Dirac frequency in this device without photonic bandgaps or total internal reflections. We perform a theoretical analysis of this new wave localization and verify it experimentally. This work paves the way for exploring localized defect modes at the Dirac point in the visible and infrared bands, with potential applicability to new optical devices.

Spatial algebraic solitons at the Dirac point in optically induced nonlinear photonic lattices.

The discovery of a new type of soliton occurring in periodic systems is reported. This type of nonlinear excitation exists at a Dirac point of a photonic band structure, and features an oscillating tail that damps algebraically. Solitons in periodic systems are localized states traditionally supported by photonic bandgaps. Here, it is found that besides photonic bandgaps, a Dirac point in the band structure of triangular optical lattices can also sustain solitons. Apart from their theoretical impact within the soliton theory, they have many potential uses because such solitons are possible in both Kerr material and photorefractive crystals that possess self-focusing and self-defocusing nonlinearities. The findings enrich the soliton family and provide information for studies of nonlinear waves in many branches of physics.

Tunable random polymer fiber laser.

We have demonstrated the realization of on-line temperature-controlled random lasers (RLs) in the polyhedral oligomeric silsesquioxanes (POSS) nanoparticles (NPs) as well as Pyrromethene 597 (PM597) laser dye, Fe3O4/SiO2 NPs as well as PM597, and only PM597 doped polymer optical fibers (POFs), respectively. The RLs can be obtained from the gained POFs system caused by multiple scattering of emitted light. The refractive index of the fiber core materials can be easily tuned via temperature due to the polymer with large thermo-optic coefficient. Meanwhile, the scattering mean free path of core in the POFs, which is the key role for the emission wavelength of RLs, is strongly dependent on the matrix refractive index. Thus emission wavelength of RLs in the POF temperature can be controlled through changing the temperature. With the increasing the temperature, the RL emission wavelength has occurred red-shift effect for the POFs.