Understanding the multi-functionality and tissue-specificity of decellularized dental pulp matrix hydrogels for endodontic regeneration.

Dental pulp is the only soft tissue in the tooth which plays a crucial role in maintaining intrinsic multi-functional behaviors of the dentin-pulp complex. Nevertheless, the restoration of fully functional pulps after pulpitis or pulp necrosis, termed endodontic regeneration, remained a major challenge for decades. Therefore, a bioactive and in-situ injectable biomaterial is highly desired for tissue-engineered pulp regeneration. Herein, a decellularized matrix hydrogel derived from porcine dental pulps (pDDPM-G) was prepared and characterized through systematic comparison against the porcine decellularized nerve matrix hydrogel (pDNM-G). The pDDPM-G not only exhibited superior capabilities in facilitating multi-directional differentiation of dental pulp stem cells (DPSCs) during 3D culture, but also promoted regeneration of pulp-like tissues after DPSCs encapsulation and transplantation. Further comparative proteomic and transcriptome analyses revealed the differential compositions and potential mechanisms that endow the pDDPM-G with highly tissue-specific properties. Finally, it was realized that the abundant tenascin C (TNC) in pDDPM served as key factor responsible for the activation of Notch signaling cascades and promoted DPSCs odontoblastic differentiation. Overall, it is believed that pDDPM-G is a sort of multi-functional and tissue-specific hydrogel-based material that holds great promise in endodontic regeneration and clinical translation. STATEMENT OF SIGNIFICANCE: Functional hydrogel-based biomaterials are highly desirable for endodontic regeneration treatments. Decellularized extracellular matrix (dECM) preserves most extracellular matrix components of its native tissue, exhibiting unique advantages in promoting tissue regeneration and functional restoration. In this study, we prepared a porcine dental pulp-derived dECM hydrogel (pDDPM-G), which exhibited superior performance in promoting odontogenesis, angiogenesis, and neurogenesis of the regenerating pulp-like tissue, further showed its tissue-specificity compared to the peripheral nerve-derived dECM hydrogel. In-depth proteomic and transcriptomic analyses revealed that the activation of tenascin C-Notch axis played an important role in facilitating odontogenic regeneration. This biomaterial-based study validated the great potential of the dental pulp-specific pDDPM-G for clinical applications, and provides a springboard for research strategies in ECM-related regenerative medicine.

Multiomics profiling reveals VDR as a central regulator of mesenchymal stem cell senescence with a known association with osteoporosis after high-fat diet exposure.

The consumption of a high-fat diet (HFD) has been linked to osteoporosis and an increased risk of fragility fractures. However, the specific mechanisms of HFD-induced osteoporosis are not fully understood. Our study shows that exposure to an HFD induces premature senescence in bone marrow mesenchymal stem cells (BMSCs), diminishing their proliferation and osteogenic capability, and thereby contributes to osteoporosis. Transcriptomic and chromatin accessibility analyses revealed the decreased chromatin accessibility of vitamin D receptor (VDR)-binding sequences and decreased VDR signaling in BMSCs from HFD-fed mice, suggesting that VDR is a key regulator of BMSC senescence. Notably, the administration of a VDR activator to HFD-fed mice rescued BMSC senescence and significantly improved osteogenesis, bone mass, and other bone parameters. Mechanistically, VDR activation reduced BMSC senescence by decreasing intracellular reactive oxygen species (ROS) levels and preserving mitochondrial function. Our findings not only elucidate the mechanisms by which an HFD induces BMSC senescence and associated osteoporosis but also offer new insights into treating HFD-induced osteoporosis by targeting the VDR-superoxide dismutase 2 (SOD2)-ROS axis.

Nicotinamide Riboside Modulates HIF-1 Signaling to Maintain and Enhance Odontoblastic Differentiation in Human Dental Pulp Stem Cells.

Human dental pulp stem cells (hDPSCs) play a vital role in the regeneration of the pulp-dentin complex after pulp disease. While the regeneration efficiency relies on the odontoblastic differentiation capacity of hDPSCs, this is difficult to regulate within the pulp cavity. Although nicotinamide riboside (NR) has been found to promote tissue regeneration, its specific role in pulp-dentin complex regeneration is not fully understood. Here, we aimed to explore the role of NR in the odontoblastic differentiation of hDPSCs and its underlying molecular mechanism. It was found that NR enhanced the viability and retarded senescence in hDPSCs with higher NAD+/NADH levels. In contrast to the sustained action of NR, the multi-directional differentiation of hDPSCs was enhanced after NR pre-treatment. Moreover, in an ectopic pulp regeneration assay in nude mice, transplantation of hDPSCs pretreated with NR promoted the formation of a dentin-like structure surrounded by cells positively expressing DMP-1 and DSPP. RNA-Seq demonstrated inhibition of the HIF-1 signaling pathway in hDPSCs pretreated with NR. The number of HIF-1α-positive cells was significantly decreased in hDPSCs pretreated by NR in vivo. Similarly, NR significantly downregulated the expression of HIF-1α in vitro. The findings suggested that NR could potentially regulate hDPSC odontoblastic differentiation and promote the development of innovative strategies for dental pulp repair.

Injectable decellularized extracellular matrix hydrogel promotes salivary gland regeneration via endogenous stem cell recruitment and suppression of fibrogenesis.

Saliva is key to the maintenance of oral homeostasis. However, several forms of salivary gland (SG) disorders, followed by hyposalivation, often result in dental caries, oral infection, and decreased taste, which dramatically affect the quality of patient's life. Functional biomaterials hold great potential for tissue regeneration in damaged or dysfunctional SGs and maintaining the good health of oral cavity. Herein, we prepared an injectable hydrogel derived from decellularized porcine submandibular glands (pDSG-gel), the material and biological properties of the hydrogel were systematically investigated. First, good biocompatibility and bioactivities of the pDSG-gel were validated in 2D and 3D cultures of primary submandibular gland mesenchymal stem cells (SGMSCs). Especially, the pDSG-gel effectively facilitated SGMSCs migration and recruitment through the activation of PI3K/AKT signaling pathway, suggested by transcriptomic analysis and immunoblotting. Furthermore, proteomic analysis of the pDSG revealed that many extracellular matrix components and secreted factors were preserved, which may contribute to stem cell homing. The recruitment of endogenous SG cells was confirmed in vivo, upon in situ injection of the pDSG-gel into the defective SGs in rats. Acinar and ductal-like structures were evident in the injury sites after pDSG-gel treatment, suggesting the reconstruction of functional SG units. Meanwhile, histological characterizations showed that the administration of the pDSG-gel also significantly suppressed fibrogenesis within the injured SG tissues. Taken together, this tissue-specific hydrogel provides a pro-regenerative microenvironment for endogenous SG regeneration and holds great promise as a powerful and bioactive material for future treatments of SG diseases. STATEMENT OF SIGNIFICANCE: Decellularized extracellular matrix (dECM) has been acknowledged as one of the most promising biomaterials that recapitalizes the microenvironment in native tissues. Hydrogel derived from the dECM allows in situ administration for tissue repair. Herein, a tissue-specific dECM hydrogel derived from porcine salivary glands (pDSG-gel) was successfully prepared and developed for functional reconstruction of defective salivary gland (SG) tissues. The pDSG-gel effectively accelerated endogenous SG stem cells migration and their recruitment for acinar- and ductal-like regeneration, which was attributed to the activation of PI3K/AKT signaling pathway. Additionally, the introduction of the pDSG-gel resulted in highly suppressed fibrogenesis in the defective tissues. These outcomes indicated that the pDSG-gel holds great potential in clinical translation toward SG regeneration through cell-free treatments.

Targeting cariogenic pathogens and promoting competitiveness of commensal bacteria with a novel pH-responsive antimicrobial peptide.

Novel ecological antimicrobial approaches to dental caries focus on inhibiting cariogenic pathogens while enhancing the growth of health-associated commensal communities or suppressing cariogenic virulence without affecting the diversity of oral microbiota, which emphasize the crucial role of establishing a healthy microbiome in caries prevention. Considering that the acidified cariogenic microenvironment leads to the dysbiosis of microecology and demineralization of enamel, exploiting the acidic pH as a bioresponsive trigger to help materials and medications target cariogenic pathogens is a promising strategy to develop novel anticaries approaches. In this study, a pH-responsive antimicrobial peptide, LH12, was designed utilizing the pH-sensitivity of histidine, which showed higher cationicity and stronger interactions with bacterial cytomembranes at acidic pH. Streptococcus mutans was used as the in vitro caries model to evaluate the inhibitory effects of LH12 on the cariogenic properties, such as biofilm formation, biofilm morphology, acidurance, acidogenicity, and exopolysaccharides synthesis. The dual-species model of Streptococcus mutans and Streptococcus gordonii was established in vitro to evaluate the regulation effects of LH12 on the mixed species microbial community containing both cariogenic bacteria and commensal bacteria. LH12 suppressed the cariogenic properties and regulated the bacterial composition to a healthier condition through a dual-functional mechanism. Firstly, LH12-targeted cariogenic pathogens in response to the acidified microenvironment and suppressed the cariogenic virulence by inhibiting the expression of multiple virulence genes and two-component signal transduction systems. Additionally, LH12 elevated H2O2 production of the commensal bacteria and subsequently improved the ecological competitiveness of the commensals. The dual-functional mechanism made LH12 a potential bioresponsive approach to caries management.

Size Dependence of Particulate Calcium Phosphate Fillers in Dental Resin Composites.

Resin composites that consist of polymeric resins and functional fillers are commonly used as restorative materials for dental caries. Various types of calcium phosphates (CaPs) are studied as remineralizing fillers in the formulation of dental resin composites, which are generally inhibitory to demineralization of teeth, but the performance of resin composites has not yet been investigated comprehensively with respect to the size of CaP particles. In this study, the same tricalcium phosphate (TCP) particles within two different size ranges, the as-received TCP particles (TCP) and those resulted from grinding (TCP-G), were tested to determine the size dependence of CaP fillers in dental resin composites. The buffering capability, mechanical properties, ion release, antibacterial performance, and remineralization effect of TCP/TCP-G-containing composites were experimentally characterized and compared against two other commercial dental materials. The integration of micrometer-sized TCP particles resulted in a similar buffering effect and Ca2+/PO4 3- release behaviors compared to the resin composite containing much smaller TCP-G particles. The flexural strength of the TCP-G resin composite was lower than that of the TCP composite after immersion in water for 30 days. However, the TCP-G composite facilitated crystal deposition toward better gap-closing performance at the dentin-composite interface. This study explored detailed insights about the size effect of CaP fillers, which is useful for the development of functional dental resin composites and their clinical translation.

Functional Dental Pulp Regeneration: Basic Research and Clinical Translation.

Pulpal and periapical diseases account for a large proportion of dental visits, the current treatments for which are root canal therapy (RCT) and pulp revascularisation. Despite the clinical signs of full recovery and histological reconstruction, true regeneration of pulp tissues is still far from being achieved. The goal of regenerative endodontics is to promote normal pulp function recovery in inflamed or necrotic teeth that would result in true regeneration of the pulpodentinal complex. Recently, rapid progress has been made related to tissue engineering-mediated pulp regeneration, which combines stem cells, biomaterials, and growth factors. Since the successful isolation and characterisation of dental pulp stem cells (DPSCs) and other applicable dental mesenchymal stem cells, basic research and preclinical exploration of stem cell-mediated functional pulp regeneration via cell transplantation and cell homing have received considerably more attention. Some of this effort has translated into clinical therapeutic applications, bringing a ground-breaking revolution and a new perspective to the endodontic field. In this article, we retrospectively examined the current treatment status and clinical goals of pulpal and periapical diseases and scrutinized biological studies of functional pulp regeneration with a focus on DPSCs, biomaterials, and growth factors. Then, we reviewed preclinical experiments based on various animal models and research strategies. Finally, we summarised the current challenges encountered in preclinical or clinical regenerative applications and suggested promising solutions to address these challenges to guide tissue engineering-mediated clinical translation in the future.

A Decellularized Matrix Hydrogel Derived from Human Dental Pulp Promotes Dental Pulp Stem Cell Proliferation, Migration, and Induced Multidirectional Differentiation In Vitro.

INTRODUCTION: Dental pulp is a major composition in the pulp-dentin complex, which serves as protective system against dental trauma/infection. Functional dental pulp regeneration is highly desirable after pulpitis or pulp necrosis. However, endodontic regeneration has remained challenging for decades because of the deconstructive microenvironment and the lack of functional cells within the root canal system. The present study developed a decellularized matrix hydrogel derived from human dental pulp (hDDPM-G), which might serve as a growth-permissive microenvironment for dental pulp regeneration. METHODS: Human dental pulps extracted from healthy wisdom teeth were decellularized and digested and then underwent sol-gel transition to form hDDPM-G. The protein compositions were identified by proteomic analysis. Human dental pulp stem cells (hDPSCs) were seeded on hDDPM-G-coated surfaces and evaluated by immunofluorescence staining, transwell migration, and Cell Counting Kit-8 (Dojindo, Kumamoto, Japan) assays. Induced hDPSC differentiation was examined in vitro and characterized by immunostaining, Western blotting, and reverse transcription polymerase chain reaction. RESULTS: Complete decellularization was implemented. Protein contents found in the human decellularized dental pulp matrix were identified to contribute in promoting cell proliferation, migration, and regulation of stem cell differentiation. The hDDPM-G-coated surfaces promoted hDPSC adhesion, migration, and proliferation. Furthermore, hDDPM-G coatings facilitated odontoblastlike, neural-like, and angiogenic differentiation of the seeded hDPSCs after being cultured in induction media for 14 days. CONCLUSIONS: This study showed that hDDPM-G effectively contributed in promoting hDPSC proliferation and migration and induced multidirectional differentiation. Considering the injectability and gelation at body temperature, hDDPM-G may hold translational potential for endodontic regeneration.

LncRNA DANCR sponges miR-216a to inhibit odontoblast differentiation through upregulating c-Cbl.

Enhanced odontoblast differentiation of human dental pulp cells (hDPCs) is considered a keystone in dentin-pulp complex formation. We have revealed lncRNA DANCR was implicated in this differentiation program, however, its mechanism in odontoblast differentiation of hDPCs remains further explored. In this study, by employing loss-of-function approach, we identified downregulation of DANCR drived odontoblast differentiaion of hDPCs. Bioinformatics analysis was utilized to show that DANCR contained binding site for miR-216a and an inverse correlation between DANCR and miR-216a was obtained. Dual luciferase reporter assay and RNA-binding protein immunoprecipitation (RIP) were applied to further confirm that DANCR conferred its functions by directly binding to miR-216a. Notably, miR-216a was able to bind to the 3'-UTR of c-Cbl and repressed its expression. In addition, the protein level of c-CBL was significantly downregulated during hDPCs differentiation, while c-Cbl overexpression inhibited odontoblast differentiation of hDPCs. Moreover, downregulation of miR-216a efficiently reversed the suppression of c-Cbl level and odontoblast differentiation induced by knockdown of DANCR. Taken together, these analyses indicated that DANCR positively regulated the expression of c-Cbl, through sponging miR-216a, and inhibited odontoblast differentiation of hDPCs. Our results will extend the field of clinical application for cell-based therapy in regenerative medicine.

The antibacterial, cytotoxic, and flexural properties of a composite resin containing a quaternary ammonium monomer.

STATEMENT OF PROBLEM: The use of composite resin to restore teeth has increased substantially during the last decades. However, secondary caries and the fracture of restorations are the leading reasons for clinical restoration failure. Mechanically strong composite resins with caries-inhibition capabilities are needed. Although antibacterial dimethacrylate quaternary ammonium monomers have been synthesized, composite resin containing dimethacrylate quaternary ammonium monomers and glass fillers has rarely been reported. PURPOSE: The purpose of this in vitro study was to evaluate the possibility of the clinical use of an experimental composite resin containing urethane dimethacrylate quaternary ammonium compound (UDMQA-12) by investigating its antibacterial activity, cytotoxicity, flexural strength, and flexural modulus. MATERIAL AND METHODS: Antibacterial activity against Streptococcus mutans was investigated by means of direct contact test. The antibacterial activity of specimens after water immersion and saliva treatment was also tested. These were compared with a commercially available composite resin, Z250, and a glass ionomer cement, Fuji VII. Effects of the eluent from the experimental composite resin on the metabolic activity of human dental pulp cells were quantified. Disks of 1 mm in thickness and 15 mm in diameter were used in the antibacterial and cytotoxic tests. Flexural strength and flexural modulus were measured with a 3-point bend test with bars of 2×2×25 mm. Three commercially available composite resins (Filtek Z250, G-aenial Anterior, and G-aenial Posterior) were used as controls in the flexural test. RESULTS: Bacterial growth was inhibited on the experimental composite resin. After water immersion or saliva treatment, the experimental composite resin showed significant antibacterial effect compared with the conventional composite resin (P<.05). No significant difference was found in cytotoxicity between the experimental composite resin and the conventional composite resin (P＞.05), and a significantly higher cytotoxicity was shown by glass ionomer cement compared with the experimental composite resin and the conventional composite resin (P<.05). The conventional composite resin had the highest flexural strength and flexural modulus (P<.05), followed by the experimental composite resin, then G-ænial Posterior and G-ænial Anterior. CONCLUSIONS: The antibacterial experimental composite resin was biocompatible and had mechanical properties similar to those of some commercially available composite resins. It might, therefore, be useful in preventing the occurrence of secondary caries.

Immunomodulatory Role of Stem Cells from Human Exfoliated Deciduous Teeth on Periodontal Regeneration.

Periodontitis is initiated by the infection of periodontal bacteria and subsequent tissue inflammation due to immunoreaction, eventually leading to periodontal apparatus loss. Stem cells from human exfoliated deciduous teeth (SHEDs) have exhibited beneficial characteristics in dental tissue regeneration. However, the immunomodulatory functions of SHEDs have not been elucidated in the context of periodontitis treatment. In this study, we investigated the potential immunomodulatory effects of SHEDs on experimental periodontitis and demonstrated that multidose delivery of SHEDs led to periodontal tissue regeneration. SHEDs and monocytes/macrophages were cocultured in transwell systems and SHEDs were found to be capable of promoting monocyte/macrophage conversion to CD206+ M2-like phenotype. Bioluminescence imaging (BLI) was employed to assess the survival and distribution of SHEDs after delivery in periodontal tissues in an induced periodontitis model, and BLI revealed that SHEDs survived for ∼7 days in periodontal tissues with little tissue diffusion. Then, multidose SHED delivery was applied to treat periodontitis at 7-day intervals. Results showed that mutidose SHEDs altered the cytokine expression profile in gingival crevicular fluid, reduced gum bleeding, increased new attachment of periodontal ligament, and decreased osteoclast differentiation. Micro-computed tomography analysis showed SHED administration significantly increased periodontal regeneration and alveolar bone volume, and decreased distance of cementoenamel junction to alveolar bone crest. Furthermore, an increase in the number of CD206+ M2 macrophages was observed in periodontal tissues following the delivery of SHEDs, which aligned well with the promoted conversion to CD206+ M2-like cells from monocytes/macrophages in vitro after stimulation by SHEDs. This study demonstrated in a rat periodontitis model that local delivery of SHEDs attributed to the induction of M2 macrophage polarization, reduction of periodontal tissue inflammation, and enhancement of periodontal regeneration.

Genetic modification to induce CXCR2 overexpression in mesenchymal stem cells enhances treatment benefits in radiation-induced oral mucositis.

Radiation-induced oral mucositis affects patient quality of life and reduces tolerance to cancer therapy. Unfortunately, traditional treatments are insufficient for the treatment of mucositis and might elicit severe side effects. Due to their immunomodulatory and anti-inflammatory properties, the transplantation of mesenchymal stem cells (MSCs) is a potential therapeutic strategy for mucositis. However, systemically infused MSCs rarely reach inflamed sites, impacting their clinical efficacy. Previous studies have demonstrated that chemokine axes play an important role in MSC targeting. By systematically evaluating the expression patterns of chemokines in radiation/chemical-induced oral mucositis, we found that CXCL2 was highly expressed, whereas cultured MSCs negligibly express the CXCL2 receptor CXCR2. Thus, we explored the potential therapeutic benefits of the transplantation of CXCR2-overexpressing MSCs (MSCsCXCR2) for mucositis treatment. Indeed, MSCsCXCR2 exhibited enhanced targeting ability to the inflamed mucosa in radiation/chemical-induced oral mucositis mouse models. Furthermore, we found that MSCCXCR2 transplantation accelerated ulcer healing by suppressing the production of pro-inflammatory chemokines and radiogenic reactive oxygen species (ROS). Altogether, these findings indicate that CXCR2 overexpression in MSCs accelerates ulcer healing, providing new insights into cell-based therapy for radiation/chemical-induced oral mucositis.

Mechanical and antibacterial properties of benzothiazole-based dental resin materials.

A synthesized benzothiazole containing mono-methacrylate monomer BTTMA was incorporated into Bis-GMA/TEGDMA dental resin system with a series of mass concentration from 5 to 30 wt.% as an antibacterial agent. The influence of BTTMA on physicochemical properties of dental resin system, such as double bond conversion (DC), volumetric shrinkage (VS), flexural strength (FS) and modulus (FM), water sorption (WS) and solubility (SL) were investigated. Direct contact testing and agar diffusion testing were used to evaluate the antibacterial activity of BTTMA containing dental resin. The results showed that BTTMA could endow dental resin with significant antibacterial activity when its concentration reached a certain amount (20 wt.%), and the antibacterial activity of BTTMA containing dental resin was mainly attributed to the immobilized BTTMA instead of the unreacted leachable BTTMA. BTTMA had no negative effect on physicochemical properties of dental resin, and even some BTTMA containing dental resins had advantages like higher DC, lower VS and WS when compared with control resin. Therefore, BTTMA could be considered as a suitable antibacterial agent in dental material, but much more researches concerned about biocompatibility should be done in future to prove whether it could be applied in clinic.

AIM2 Inflammasome Is Critical for dsDNA-Induced IL-1ß Secretion in Human Dental Pulp Cells.

The AIM2 inflammasome pathway has been determined to play an important role in cellular immune defense against bacterial and viral infections; however, its function and regulatory mechanism in human dental pulp cells (HDPCs) during pulpitis remains poorly understood. In this study, we explored whether the AIM2 inflammasome pathway was activated in HDPCs in response to dsDNA and defined its role in regulating IL-1ß secretion. We demonstrated that stimulation with IFN-γ and cytoplasmic DNA significantly activated the AIM2 inflammasome and increased IL-1ß secretion in HDPCs. Moreover, AIM2 overexpression significantly up-regulated both cleaved Caspase-1 expression and IL-1ß release in HDPCs, while suppression of ASC and Caspase-1 resulted in down-regulation of cleaved Caspase-1 and IL-1ß secretion. These results suggest that Caspase-1-dependent IL-1ß processing and secretion require the AIM2 inflammasome pathway in HDPCs and that the AIM2 inflammasome pathway is critical for regulation of the dental pulp immune response.

Physicochemical properties of discontinuous S2-glass fiber reinforced resin composite.

The objective of this study was to investigate several physicochemical properties of an experimental discontinuous S2-glass fiber-reinforced resin composite. The experimental composite was prepared by mixing 10 wt% of discontinuous S2-glass fibers with 27.5 wt% of resin matrix and 62.5 wt% of particulate fillers. Flexural strength (FS) and modulus (FM), fracture toughness (FT), work of fracture (WOF), double bond conversion (DC), Vickers hardness, volume shrinkage (VS) and fiber length distribution were determined. These were compared with two commercial resin composites. The experimental composite showed the highest FS, WOF and FT compared with two control composites. The DC of the experimental composite was comparable with controls. No significant difference was observed in VS between the three tested composites. The use of discontinuous glass fiber fillers with polymer matrix and particulate fillers yielded improved physical properties and substantial improvement was associated with the use of S2-glass fiber.

Alcohol Inhibits Odontogenic Differentiation of Human Dental Pulp Cells by Activating mTOR Signaling.

Long-term heavy alcohol consumption could result in a range of health, social, and behavioral problems. People who abuse alcohol are at high risks of seriously having osteopenia, periodontal disease, and compromised oral health. However, the role of ethanol (EtOH) in the biological functions of human dental pulp cells (DPCs) is unknown. Whether EtOH affects the odontoblastic differentiation of DPCs through the mechanistic target of rapamycin (mTOR) remains unexplored. The objective of this study was to investigate the effects of EtOH on DPC differentiation and mineralization. DPCs were isolated and purified from human dental pulps. The proliferation and odontoblastic differentiation of DPCs treated with EtOH were subsequently investigated. Different doses of EtOH were shown to be cytocompatible with DPCs. EtOH significantly activated the mTOR pathway in a dose-dependent manner. In addition, EtOH downregulated the alkaline phosphatase activity, attenuated the mineralized nodule formation, and suppressed the expression of odontoblastic markers including ALP, DSPP, DMP-1, Runx2, and OCN. Moreover, the pretreatment with rapamycin, a specific mTOR inhibitor, markedly reversed the EtOH-induced odontoblastic differentiation and cell mineralization. Our findings show for the first time that EtOH can suppress DPC differentiation and mineralization in a mTOR-dependent manner, indicating that EtOH may be involved in negatively regulating the dental pulp repair.

Properties of discontinuous S2-glass fiber-particulate-reinforced resin composites with two different fiber length distributions.

PURPOSE: To investigate the reinforcing efficiency and light curing properties of discontinuous S2-glass fiber-particulate reinforced resin composite and to examine length distribution of discontinuous S2-glass fibers after a mixing process into resin composite. METHODS: Experimental S2-glass fiber-particulate reinforced resin composites were prepared by mixing 10wt% of discontinuous S2-glass fibers, which had been manually cut into two different lengths (1.5 and 3.0mm), with various weight ratios of dimethacrylate based resin matrix and silaned BaAlSiO2 filler particulates. The resin composite made with 25wt% of UDMA/SR833s resin system and 75wt% of silaned BaAlSiO2 filler particulates was used as control composite which had similar composition as the commonly used resin composites. Flexural strength (FS), flexural modulus (FM) and work of fracture (WOF) were measured. Fractured specimens were observed by scanning electron microscopy. Double bond conversion (DC) and fiber length distribution were also studied. RESULTS: Reinforcement of resin composites with discontinuous S2-glass fibers can significantly increase the FS, FM and WOF of resin composites over the control. The fibers from the mixed resin composites showed great variation in final fiber length. The mean aspect ratio of experimental composites containing 62.5wt% of particulate fillers and 10wt% of 1.5 or 3.0mm cutting S2-glass fibers was 70 and 132, respectively. No difference was found in DC between resin composites containing S2-glass fibers with two different cutting lengths. CONCLUSION: Discontinuous S2-glass fibers can effectively reinforce the particulate-filled resin composite and thus may be potential to manufacture resin composites for high-stress bearing application.

Physical and chemical properties of an antimicrobial Bis-GMA free dental resin with quaternary ammonium dimethacrylate monomer.

The objective of this study was to evaluate the antibacterial activity, physicochemical properties of the quaternary ammonium dimethacrylate monomer N,N-bis[2-(3-(methacryloyloxy)propanamido)-ethyl]-N-methylhexadecyl ammonium bromide (IMQ-16) containing diurethane dimethacrylate (UDMA)/tricyclodecane dimethanol diacrylate (SR833s) resin system and compare with bisphenylglycidyl dimethacrylate (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA) resin system. It was hypothesized that the physical and chemical properties of the experimental polymers would be comparable with Bis-GMA/TEGDMA polymer and IMQ-16 monomer could endow the UDMA/SR833s resin with antibacterial activity. Double bond conversion (DC) was measured using Fourier transform infrared spectroscopy (FTIR). Mechanical properties including flexural strength (FS) and flexural modulus (FM) were measured by three-point bending test with bars of 2mm×2mm×25mm. Water sorption (WS) and solubility (WSL) were also investigated. Antibacterial activity of obtained polymers against Streptococcus mutans Ingbitt (S. mutans) was tested through direct contact test (DCT). The presence of antibacterial activity due to soluble components was also investigated by agar diffusion test (ADT). All of the polymers containing IMQ-16 exhibited improvements in WS and WSL, while maintaining equivalent DC and FS relative to the Bis-GMA/TEGDMA control system. Incorporation of 17% and 20% of IMQ-16 into UDMA/SR833s resin reduced the viable counts of S. mutans after incubation on the surface of the materials and produced no inhibition zones around the cured discs in ADT. UDMA/SR833s resin system is promising to formulate an antibacterial polymer with equivalent or even higher physicochemical properties relative to Bis-GMA/TEGDMA formulation. IMQ-16 is capable to endow UDMA/SR833s resin system with significant antibacterial activity when the mass ratio is 17% or 20%.

Synthesis of antibacterial methacrylate monomer derived from thiazole and its application in dental resin.

A non-quaternary ammonium antibacterial methacrylate monomer MEMT derived from thiazole was synthesized and applied into UDMA/TEGDMA dental resin with a series of mass fraction (10 wt%, 20 wt%, and 30 wt%). Double bond conversion, polymerization shrinkage, water sorption, solubility, flexural strength and modulus, and antibacterial activity of MEMT containing resin formulations were investigated with UDMA/TEGDMA as control resin. The results showed that MEMT containing dental resin had higher double bond conversion than control resin. Compared with control polymer, all MEMT containing polymer had comparable or lower polymerization shrinkage, water sorption and solubility, except for the polymer with 30 wt% of MEMT which had higher water sorption and solubility than control polymer. The MEMT had no influence on flexural strength and modulus before water immersion, but all MEMT containing polymers had lower flexural strength and modulus than control polymer after water immersion. The MEMT could endow dental polymer with obvious antibacterial activity by immobilizing MEMT into the polymeric network.

A study of the coupling relationship between concrete surface temperature and concrete surface emissivity in natural conditions.

Land surface emissivity (LSE) has already been recognized as a crucial parameter for the determination of land surface temperature (LST). There is an ill-posed problem for the retrieval of LST and LSE. And laboratory-based emissivity is measured in natural constant conditions, which is limited in the application in thermal remote sensing. To solve the above problems, the coupling of LST and LSE is explored to eliminate temperature effects and improve the accuracy of LES. And then, the estimation accuracy of LST from passive remote sensing images will be improved. For different land surface materials, the coupling of land surface emissivity and land surface temperature is various. This paper focuses on studying concrete surface that is one of the typical man-made materials in urban. First the experiments of measuring concrete surface emissivity and concrete surface temperature in natural conditions are arranged reasonably and the suitable data are selected under ideal atmosphere conductions. Then to improve the determination accuracy of concrete surface emissivity, the algorithm worked on the computer of Fourier Transform Infrared Spectroradiometer (FTIR) has been improved by the most adapted temperature and emissivity separation algorithm. Finally the coupling of concrete surface temperature and concrete surface emissivity is analyzed and the coupling model of concrete surface temperature and concrete surface emissivity is established. The results show that there is a highest correlation coefficient between the second derivative of emissivity spectra and concrete surface temperature, and the correlation coefficient is -0.925 1. The best coupling model is the stepwise regression model, whose determination coefficient (R2) is 0.886. The determination coefficient (R2) is 0.905 and the root mean squares error (RMSE) is 0.292 1 in the validation of the model. The coupling model of concrete surface temperature and concrete surface emissivity under natural conditions provides a new approach for improving the estimation accuracy of LST from passive remote sensing images.