RESUMEN
BACKGROUND AND PURPOSE: A retrospective evaluation of dosimetric predictors and leveraged dose-volume data for gastrointestinal (GI) toxicities for locally-advanced pancreatic cancer (LAPC) treated with daily stereotactic MRI-guided online-adaptive radiotherapy (SMART). MATERIALS AND METHODS: 147 patients with LAPC were treated with SMART at our institution between 2018 and 2021. Patients were evaluated using CTCAE V5.0 for RT-related acute (≤3 months) and late (>3 months) toxicities. Each organ at risk (OAR) was matched to a ≥ grade 2 (Gr2+) toxicity endpoint composite group. A least absolute shrinkage selector operator regression model was constructed by dose-volumes per OAR to account for OAR multicollinearity. A receiver operator curve (ROC) analysis was performed for the combined averages of significant toxicity groups to identify critical volumes per dose levels. RESULTS: 18 of 147 patients experienced Gr2+ GI toxicity. 17 Gr2+ duodenal toxicities were seen; the most significant predictor was a V33Gy odds ratio (OR) of 1.69 per cc (95 % CI 1.14-2.88). 17 Gr2+ small bowel (SB) toxicities were seen; the most significant predictor was a V33Gy OR of 1.60 per cc (95 % CI 1.01-2.53). The AUC was 0.72 for duodenum and SB. The optimal duodenal cut-point was 1.00 cc (true positive (TP): 17.8 %; true negative (TN); 94.9 %). The SB cut-point was 1.75 cc (TP: 16.7 %; TN: 94.3 %). No stomach or large bowel dose toxicity predictors were identified. CONCLUSIONS: For LAPC treated with SMART, the dose-volume threshold of V33Gy for duodenum and SB was associated with Gr2+ toxicities. These metrics can be utilized to guide future dose-volume constraints for patients undergoing upper abdominal SBRT.
RESUMEN
MRI-guided radiotherapy systems enable beam gating by tracking the target on planar, two-dimensional cine images acquired during treatment. This study aims to evaluate how deep-learning (DL) models for target tracking that are trained on data from one fraction can be translated to subsequent fractions. Cine images were acquired for six patients treated on an MRI-guided radiotherapy platform (MRIdian, Viewray Inc.) with an onboard 0.35 T MRI scanner. Three DL models (U-net, attention U-net and nested U-net) for target tracking were trained using two training strategies: (1) uniform training using data obtained only from the first fraction with testing performed on data from subsequent fractions and (2) adaptive training in which training was updated each fraction by adding 20 samples from the current fraction with testing performed on the remaining images from that fraction. Tracking performance was compared between algorithms, models and training strategies by evaluating the Dice similarity coefficient (DSC) and 95% Hausdorff Distance (HD95) between automatically generated and manually specified contours. The mean DSC for all six patients in comparing manual contours and contours generated by the onboard algorithm (OBT) were 0.68 ± 0.16. Compared to OBT, the DSC values improved 17.0 - 19.3% for the three DL models with uniform training, and 24.7 - 25.7% for the models based on adaptive training. The HD95 values improved 50.6 - 54.5% for the models based on adaptive training. DL-based techniques achieved better tracking performance than the onboard, registration-based tracking approach. DL-based tracking performance improved when implementing an adaptive strategy that augments training data fraction-by-fraction.
Asunto(s)
Aprendizaje Profundo , Pulmón , Imagen por Resonancia Cinemagnética , Radioterapia Guiada por Imagen , Humanos , Pulmón/diagnóstico por imagen , Neoplasias Pulmonares/radioterapia , Neoplasias Pulmonares/diagnóstico por imagen , Algoritmos , Procesamiento de Imagen Asistido por ComputadorRESUMEN
BACKGROUND: For autosegmentation models, the data used to train the model (e.g., public datasets and/or vendor-collected data) and the data on which the model is deployed in the clinic are typically not the same, potentially impacting the performance of these models by a process called domain shift. Tools to routinely monitor and predict segmentation performance are needed for quality assurance. Here, we develop an approach to perform such monitoring and performance prediction for cardiac substructure segmentation. PURPOSE: To develop a quality assurance (QA) framework for routine or continuous monitoring of domain shift and the performance of cardiac substructure autosegmentation algorithms. METHODS: A benchmark dataset consisting of computed tomography (CT) images along with manual cardiac substructure delineations of 241 breast cancer radiotherapy patients were collected, including one "normal" image domain of clean images and five "abnormal" domains containing images with artifact (metal, contrast), pathology, or quality variations due to scanner protocol differences (field of view, noise, reconstruction kernel, and slice thickness). The QA framework consisted of an image domain shift detector which operated on the input CT images and a shape quality detector on the output of an autosegmentation model, and a regression model for predicting autosegmentation model performance. The image domain shift detector was composed of a trained denoising autoencoder (DAE) and two hand-engineered image quality features to detect normal versus abnormal domains in the input CT images. The shape quality detector was a variational autoencoder (VAE) trained to estimate the shape quality of the auto-segmentation results. The output from the image domain shift and shape quality detectors was used to train a regression model to predict the per-patient segmentation accuracy, measured by Dice coefficient similarity (DSC) to physician contours. Different regression techniques were investigated including linear regression, Bagging, Gaussian process regression, random forest, and gradient boost regression. Of the 241 patients, 60 were used to train the autosegmentation models, 120 for training the QA framework, and the remaining 61 for testing the QA framework. A total of 19 autosegmentation models were used to evaluate QA framework performance, including 18 convolutional neural network (CNN)-based and one transformer-based model. RESULTS: When tested on the benchmark dataset, all abnormal domains resulted in a significant DSC decrease relative to the normal domain for CNN models ( p < 0.001 $p < 0.001$ ), but only for some domains for the transformer model. No significant relationship was found between the performance of an autosegmentation model and scanner protocol parameters ( p = 0.42 $p = 0.42$ ) except noise ( p = 0.01 $p = 0.01$ ). CNN-based autosegmentation models demonstrated a decreased DSC ranging from 0.07 to 0.41 with added noise, while the transformer-based model was not significantly affected (ANOVA, p = 0.99 $p=0.99$ ). For the QA framework, linear regression models with bootstrap aggregation resulted in the highest mean absolute error (MAE) of 0.041 ± 0.002 $0.041 \pm 0.002$ , in predicted DSC (relative to true DSC between autosegmentation and physician). MAE was lowest when combining both input (image) detectors and output (shape) detectors compared to output detectors alone. CONCLUSIONS: A QA framework was able to predict cardiac substructure autosegmentation model performance for clinically anticipated "abnormal" domain shifts.
Asunto(s)
Aprendizaje Profundo , Humanos , Tomografía Computarizada por Rayos X/métodos , Redes Neurales de la Computación , Corazón/diagnóstico por imagen , Mama , Procesamiento de Imagen Asistido por Computador/métodosRESUMEN
Background: Stereotactic arrhythmia radioablation (STAR) is a potential new therapy for patients with refractory ventricular tachycardia (VT). The arrhythmogenic substrate (target) is synthesized from clinical and electro-anatomical information. This study was designed to evaluate the baseline interobserver variability in target delineation for STAR. Methods: Delineation software designed for research purposes was used. The study was split into three phases. Firstly, electrophysiologists delineated a well-defined structure in three patients (spinal canal). Secondly, observers delineated the VT-target in three patients based on case descriptions. To evaluate baseline performance, a basic workflow approach was used, no advanced techniques were allowed. Thirdly, observers delineated three predefined segments from the 17-segment model. Interobserver variability was evaluated by assessing volumes, variation in distance to the median volume expressed by the root-mean-square of the standard deviation (RMS-SD) over the target volume, and the Dice-coefficient. Results: Ten electrophysiologists completed the study. For the first phase interobserver variability was low as indicated by low variation in distance to the median volume (RMS-SD range: 0.02-0.02â cm) and high Dice-coefficients (mean: 0.97 ± 0.01). In the second phase distance to the median volume was large (RMS-SD range: 0.52-1.02â cm) and the Dice-coefficients low (mean: 0.40 ± 0.15). In the third phase, similar results were observed (RMS-SD range: 0.51-1.55â cm, Dice-coefficient mean: 0.31 ± 0.21). Conclusions: Interobserver variability is high for manual delineation of the VT-target and ventricular segments. This evaluation of the baseline observer variation shows that there is a need for methods and tools to improve variability and allows for future comparison of interventions aiming to reduce observer variation, for STAR but possibly also for catheter ablation.
RESUMEN
Introduction: Our institution was the first in the world to clinically implement MR-guided adaptive radiotherapy (MRgART) in 2014. In 2021, we installed a CT-guided adaptive radiotherapy (CTgART) unit, becoming one of the first clinics in the world to build a dual-modality ART clinic. Herein we review factors that lead to the development of a high-volume dual-modality ART program and treatment census over an initial, one-year period. Materials and Methods: The clinical adaptive service at our institution is enabled with both MRgART (MRIdian, ViewRay, Inc, Mountain View, CA) and CTgART (ETHOS, Varian Medical Systems, Palo Alto, CA) platforms. We analyzed patient and treatment information including disease sites treated, radiation dose and fractionation, and treatment times for patients on these two platforms. Additionally, we reviewed our institutional workflow for creating, verifying, and implementing a new adaptive workflow on either platform. Results: From October 2021 to September 2022, 256 patients were treated with adaptive intent at our institution, 186 with MRgART and 70 with CTgART. The majority (106/186) of patients treated with MRgART had pancreatic cancer, and the most common sites treated with CTgART were pelvis (23/70) and abdomen (20/70). 93.0% of treatments on the MRgART platform were stereotactic body radiotherapy (SBRT), whereas only 72.9% of treatments on the CTgART platform were SBRT. Abdominal gated cases were allotted a longer time on the CTgART platform compared to the MRgART platform, whereas pelvic cases were allotted a shorter time on the CTgART platform when compared to the MRgART platform. Our adaptive implementation technique has led to six open clinical trials using MRgART and seven using CTgART. Conclusions: We demonstrate the successful development of a dual platform ART program in our clinic. Ongoing efforts are needed to continue the development and integration of ART across platforms and disease sites to maximize access and evidence for this technique worldwide.
RESUMEN
Purpose: We conducted a prospective, in silico study to evaluate the feasibility of cone-beam computed tomography (CBCT)-guided stereotactic adaptive radiation therapy (CT-STAR) for the treatment of ultracentral thoracic cancers (NCT04008537). We hypothesized that CT-STAR would reduce dose to organs at risk (OARs) compared with nonadaptive stereotactic body radiation therapy (SBRT) while maintaining adequate tumor coverage. Methods and Materials: Patients who were already receiving radiation therapy for ultracentral thoracic malignancies underwent 5 additional daily CBCTs on the ETHOS system as part of a prospective imaging study. These were used to simulate CT-STAR, in silico. Initial, nonadaptive plans (PI) were created based on simulation images and simulated adaptive plans (PA) were based on study CBCTs. 55 Gy/5 fractions was prescribed, with OAR constraint prioritization over PTV coverage under a strict isotoxicity approach. PI were applied to patients' anatomy of the day and compared with daily PA using dose-volume histogram metrics, with selection of superior plans for simulated delivery. Feasibility was defined as completion of the end-to-end adaptive workflow while meeting strict OAR constraints in ≥80% of fractions. CT-STAR was performed under time pressures to mimic clinical adaptive processes. Results: Seven patients were accrued, 6 with intraparenchymal tumors and 1 with a subcarinal lymph node. CT-STAR was feasible in 34 of 35 simulated fractions. In total, 32 dose constraint violations occurred when the PI was applied to anatomy-of-the-day across 22 of 35 fractions. These violations were resolved by the PA in all but one fraction, in which the proximal bronchial tree dose was still numerically improved through adaptation. The mean difference between the planning target volume and gross total volume V100% in the PI and the PA was -0.24% (-10.40 to 9.90) and -0.62% (-11.00 to 8.00), respectively. Mean end-to-end workflow time was 28.21 minutes (18.02-50.97). Conclusions: CT-STAR widened the dosimetric therapeutic index of ultracentral thorax SBRT compared with nonadaptive SBRT. A phase 1 protocol is underway to evaluate the safety of this paradigm for patients with ultracentral early-stage NSCLC.
RESUMEN
INTRODUCTION: We aimed to develop knowledge-based tools for robust adaptive radiotherapy (ART) planning to determine on-table adaptive DVH metric variations or planning process errors for stereotactic pancreatic ART. We developed volume-based dosimetric identifiers to identify deviations of ART plans from simulation plans. MATERIALS AND METHODS: Two patient cohorts who were treated on MR-Linac for pancreas cancer were included in this retrospective study; a training cohort and a validation cohort. All patients received 50 Gy in 5 fractions. PTV-OPT was generated by subtracting the critical organs plus a 5 mm-margin from PTV. Several metrics that potentially can identify failure-modes were calculated including PTV & PTV_OPT V95% and PTV & PTV_OPT D95%/D5%. The difference between each DVH metric in each adaptive plan with the DVH metric in simulation plan was calculated. The 95% confidence interval (CI) of the variations in each DVH metric was calculated for the patient training cohort. Variations in DVH metrics that exceeded the 95% CI for all fractions in training and validation cohort were flagged for retrospective investigation for root-cause analysis to determine their predictive power for identifying failure-modes. RESULTS: The CIs for the PTV & PTV_OPT V95% and PTV & PTV_OPT D95%/D5% were ± 13%, ± 5%, ± 0.1, ± 0.03, respectively. We estimated the positive predictive value and negative predictive value of our method to be 77% and 89%, respectively, for the training cohort, and 80% for both in the validation cohort. DISCUSSION: We developed dosimetric indicators for ART planning QA to identify population-based deviations or planning errors during online adaptive process for stereotactic pancreatic ART. This technology may be useful as an ART clinical trial QA tool and improve overall ART quality at an institution.
Asunto(s)
Neoplasias Pancreáticas , Radioterapia de Intensidad Modulada , Humanos , Dosificación Radioterapéutica , Estudios Retrospectivos , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia de Intensidad Modulada/métodos , Órganos en Riesgo , Neoplasias Pancreáticas/radioterapia , Neoplasias PancreáticasRESUMEN
Purpose: There is a vital need to train radiation therapy professionals in low- and middle-income countries (LMICs) to develop sustainable cancer treatment capacity and infrastructure. LMICs have started to introduce intensity modulated radiation therapy (IMRT), which is the standard of care in high-income countries, because of improved outcomes and reduced toxicities. This work reports the efficacy of a complementary asynchronous plus synchronous virtual-training approach on improving radiation therapy professions' self-confidence levels and evaluating participants' attitudes toward asynchronous and synchronous didactic hands-on learning in 3 LMICs. Methods and Materials: Training was provided to 37 participants from Uganda, Guatemala, and Mongolia, which included 4 theoretical lectures, 4 hands-on sessions, and 8 self-guided online videos. The 36-day training focused on IMRT contouring, site-specific target/organ definition, planning/optimization, and quality assurance. Participants completed pre- and postsession confidence surveys on a 0 to 10 scale, which was converted to a 5-point Likert rating scale to evaluate the training outcomes. The pros and cons of the 3 different training formats were compared. Results: The participants included 15 (40.5%) radiation oncologists, 11 (29.7%) medical physicists, 6 (16.2%) radiation therapists, and 5 (13.5%) dosimetrists. Approximately 50% had more than 10 years of radiation therapy experience, 70.8% had no formal IMRT training, and only 25% had IMRT at their institutions. The average experience and confidence levels in using IMRT at baseline were 3.2 and 2.9, which increased to 5.2 and 4.9 (P < .001) after the theoretical training. After the hands-on training, the experience and confidence levels further improved to 5.4 and 5.5 (P < .001). After the self-guided training, the confidence levels increased further to 6.9 (P < .01). Among the 3 different training sessions, hands-on trainings (58.3%) were most helpful for the development of participants' IMRT skills, followed by theoretical sessions with 25%. Conclusions: After completing the training sessions, Uganda and Mongolia started IMRT treatments. Remote training provides an excellent and feasible e-learning platform to train radiation therapy professionals in LMICs. The training program improved the IMRT confidence levels and treatment delivery. The hands-on trainings were most preferred.
RESUMEN
Purpose: This study aimed to develop a routine quality assurance method for a dose accumulation technique provided by a radiation therapy platform for online treatment adaptation. Methods and Materials: Two commonly used phantoms were selected for the dose accumulation QA: Electron density and anthropomorphic pelvis. On a computed tomography (CT) scan of the electron density phantom, 1 target (gross tumor volume [GTV]; insert at 6 o'clock), a subvolume within this target, and 7 organs at risk (OARs; other inserts) were contoured in the treatment planning system (TPS). Two adaptation sessions were performed in which the GTV was recontoured, first at 7 o'clock and then at 5 o'clock. The accumulated dose was exported from the TPS after delivery. Deformable vector fields were also exported to manually accumulate doses for comparison. For the pelvis phantom, synthetic Gaussian deformations were applied to the planning CT image to simulate organ changes. Two single-fraction adaptive plans were created based on the deformed planning CT and cone beam CT images acquired onboard the radiation therapy platform. A manual dose accumulation was performed after delivery using the exported deformable vector fields for comparison with the system-generated result. Results: All plans were successfully delivered, and the accumulated dose was both manually calculated and derived from the TPS. For the electron density phantom, the average mean dose differences in the GTV, boost volume, and OARs 1 to 7 were 0.0%, -0.2%, 92.0%, 78.4%, 1.8%, 1.9%, 0.0%, 0.0%, and 2.3%, respectively, between the manually summed and platform-accumulated doses. The gamma passing rates for the 3-dimensional dose comparison between the manually generated and TPS-provided dose accumulations were >99% for both phantoms. Conclusions: This study demonstrated agreement between manually obtained and TPS-generated accumulated doses in terms of both mean structure doses and local 3-dimensional dose distributions. Large disagreements were observed for OAR1 and OAR2 defined on the electron density phantom due to OARs having lower deformation priority over the target in addition to artificially large changes in position induced for these structures fraction-by-fraction. The tests applied in this study to a commercial platform provide a straightforward approach toward the development of routine quality assurance of dose accumulation in online adaptation.
RESUMEN
BACKGROUND: Motion-compensated (MoCo) reconstruction shows great promise in improving four-dimensional cone-beam computed tomography (4D-CBCT) image quality. MoCo reconstruction for a 4D-CBCT could be more accurate using motion information at the CBCT imaging time than that obtained from previous 4D-CT scans. However, such data-driven approaches are hampered by the quality of initial 4D-CBCT images used for motion modeling. PURPOSE: This study aims to develop a deep-learning method to generate high-quality motion models for MoCo reconstruction to improve the quality of final 4D-CBCT images. METHODS: A 3D artifact-reduction convolutional neural network (CNN) was proposed to improve conventional phase-correlated Feldkamp-Davis-Kress (PCF) reconstructions by reducing undersampling-induced streaking artifacts while maintaining motion information. The CNN-generated artifact-mitigated 4D-CBCT images (CNN enhanced) were then used to build a motion model which was used by MoCo reconstruction (CNN+MoCo). The proposed procedure was evaluated using in-vivo patient datasets, an extended cardiac-torso (XCAT) phantom, and the public SPARE challenge datasets. The quality of reconstructed images for XCAT phantom and SPARE datasets was quantitatively assessed using root-mean-square-error (RMSE) and normalized cross-correlation (NCC). RESULTS: The trained CNN effectively reduced the streaking artifacts of PCF CBCT images for all datasets. More detailed structures can be recovered using the proposed CNN+MoCo reconstruction procedure. XCAT phantom experiments showed that the accuracy of estimated motion model using CNN enhanced images was greatly improved over PCF. CNN+MoCo showed lower RMSE and higher NCC compared to PCF, CNN enhanced and conventional MoCo. For the SPARE datasets, the average (± standard deviation) RMSE in mm-1 for body region of PCF, CNN enhanced, conventional MoCo and CNN+MoCo were 0.0040 ± 0.0009, 0.0029 ± 0.0002, 0.0024 ± 0.0003 and 0.0021 ± 0.0003. Corresponding NCC were 0.84 ± 0.05, 0.91 ± 0.05, 0.91 ± 0.05 and 0.93 ± 0.04. CONCLUSIONS: CNN-based artifact reduction can substantially reduce the artifacts in the initial 4D-CBCT images. The improved images could be used to enhance the motion modeling and ultimately improve the quality of the final 4D-CBCT images reconstructed using MoCo.
Asunto(s)
Aprendizaje Profundo , Neoplasias Pulmonares , Tomografía Computarizada de Haz Cónico Espiral , Humanos , Tomografía Computarizada Cuatridimensional/métodos , Tomografía Computarizada de Haz Cónico/métodos , Movimiento (Física) , Fantasmas de Imagen , Procesamiento de Imagen Asistido por Computador/métodos , AlgoritmosRESUMEN
INTRODUCTION: A kV imager coupled to a novel, ring-gantry radiotherapy system offers improved on-board kV-cone-beam computed tomography (CBCT) acquisition time (17-40 seconds) and image quality, which may improve CT radiotherapy image-guidance and enable online adaptive radiotherapy. We evaluated whether inter-observer contour variability over various anatomic structures was non-inferior using a novel ring gantry kV-CBCT (RG-CBCT) imager as compared to diagnostic-quality simulation CT (simCT). MATERIALS/METHODS: Seven patients undergoing radiotherapy were imaged with the RG-CBCT system at breath hold (BH) and/or free breathing (FB) for various disease sites on a prospective imaging study. Anatomy was independently contoured by seven radiation oncologists on: 1. SimCT 2. Standard C-arm kV-CBCT (CA-CBCT), and 3. Novel RG-CBCT at FB and BH. Inter-observer contour variability was evaluated by computing simultaneous truth and performance level estimation (STAPLE) consensus contours, then computing average symmetric surface distance (ASSD) and Dice similarity coefficient (DSC) between individual raters and consensus contours for comparison across image types. RESULTS: Across 7 patients, 18 organs-at-risk (OARs) were evaluated on 27 image sets. Both BH and FB RG-CBCT were non-inferior to simCT for inter-observer delineation variability across all OARs and patients by ASSD analysis (p < 0.001), whereas CA-CBCT was not (p = 0.923). RG-CBCT (FB and BH) also remained non-inferior for abdomen and breast subsites compared to simCT on ASSD analysis (p < 0.025). On DSC comparison, neither RG-CBCT nor CA-CBCT were non-inferior to simCT for all sites (p > 0.025). CONCLUSIONS: Inter-observer ability to delineate OARs using novel RG-CBCT images was non-inferior to simCT by the ASSD criterion but not DSC criterion.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Radioterapia Guiada por Imagen , Humanos , Estudios Prospectivos , Tomografía Computarizada de Haz Cónico/métodos , Radioterapia Guiada por Imagen/métodos , Fantasmas de Imagen , Planificación de la Radioterapia Asistida por Computador/métodosRESUMEN
Automatic contouring algorithms may streamline clinical workflows by reducing normal organ-at-risk (OAR) contouring time. Here we report the first comprehensive quantitative and qualitative evaluation, along with time savings assessment for a prototype deep learning segmentation algorithm from Siemens Healthineers. The accuracy of contours generated by the prototype were evaluated quantitatively using the Sorensen-Dice coefficient (Dice), Jaccard index (JC), and Hausdorff distance (Haus). Normal pelvic and head and neck OAR contours were evaluated retrospectively comparing the automatic and manual clinical contours in 100 patient cases. Contouring performance outliers were investigated. To quantify the time savings, a certified medical dosimetrist manually contoured de novo and, separately, edited the generated OARs for 10 head and neck and 10 pelvic patients. The automatic, edited, and manually generated contours were visually evaluated and scored by a practicing radiation oncologist on a scale of 1-4, where a higher score indicated better performance. The quantitative comparison revealed high (> 0.8) Dice and JC performance for relatively large organs such as the lungs, brain, femurs, and kidneys. Smaller elongated structures that had relatively low Dice and JC values tended to have low Hausdorff distances. Poor performing outlier cases revealed common anatomical inconsistencies including overestimation of the bladder and incorrect superior-inferior truncation of the spinal cord and femur contours. In all cases, editing contours was faster than manual contouring with an average time saving of 43.4% or 11.8 minutes per patient. The physician scored 240 structures with > 95% of structures receiving a score of 3 or 4. Of the structures reviewed, only 11 structures needed major revision or to be redone entirely. Our results indicate the evaluated auto-contouring solution has the potential to reduce clinical contouring time. The algorithm's performance is promising, but human review and some editing is required prior to clinical use.
Asunto(s)
Aprendizaje Profundo , Humanos , Estudios Retrospectivos , Planificación de la Radioterapia Asistida por Computador/métodos , Cuello , Algoritmos , Órganos en RiesgoRESUMEN
Purpose: Herein we report the clinical and dosimetric experience for patients with metastases treated with palliative simulation-free radiation therapy (SFRT) at a single institution. Methods and Materials: SFRT was performed at a single institution. Multiple fractionation regimens were used. Diagnostic imaging was used for treatment planning. Patient characteristics as well as planning and treatment time points were collected. A matched cohort of patients with conventional computed tomography simulation radiation therapy (CTRT) was acquired to evaluate for differences in planning and treatment time. SFRT dosimetry was evaluated to determine the fidelity of SFRT. Descriptive statistics were calculated on all variables and statistical significance was evaluated using the Wilcoxon signed rank test and t test methods. Results: Thirty sessions of SFRT were performed and matched with 30 sessions of CTRT. Seventy percent of SFRT and 63% of CTRT treatments were single fraction. The median time to plan generation was 0.88 days (0.19-1.47) for SFRT and 1.90 days (0.39-5.23) for CTRT (P = .02). The total treatment time was 41 minutes (28-64) for SFRT and 30 minutes (21-45) for CTRT (P = .02). In the SFRT courses, the maximum and mean deviations in the actual delivered dose from the approved plans for the maximum dose were 4.1% and 0.07%, respectively. All deliveries were within a 5% threshold and deemed clinically acceptable. Conclusions: Palliative SFRT is an emerging technique that allowed for a statistically significant lower time to plan generation and was dosimetrically acceptable. This benefit must be weighed against increased total treatment time for patients receiving SFRT compared with CTRT, and appropriate patient selection is critical.
RESUMEN
PURPOSE: Determine the dosimetric quality and the planning time reduction when utilizing a template-based automated planning application. METHODS: A software application integrated through the treatment planning system application programing interface, QuickPlan, was developed to facilitate automated planning using configurable templates for contouring, knowledge-based planning structure matching, field design, and algorithm settings. Validations are performed at various levels of the planning procedure and assist in the evaluation of readiness of the CT image, structure set, and plan layout for automated planning. QuickPlan is evaluated dosimetrically against 22 hippocampal-avoidance whole brain radiotherapy patients. The required times to treatment plan generation are compared for the validations set as well as 10 prospective patients whose plans have been automated by QuickPlan. RESULTS: The generations of 22 automated treatment plans are compared against a manual replanning using an identical process, resulting in dosimetric differences of minor clinical significance. The target dose to 2% volume and homogeneity index result in significantly decreased values for automated plans, whereas other dose metric evaluations are nonsignificant. The time to generate the treatment plans is reduced for all automated plans with a median difference of 9' 50â³ ± 4' 33â³. CONCLUSIONS: Template-based automated planning allows for reduced treatment planning time with consistent optimization structure creation, treatment field creation, plan optimization, and dose calculation with similar dosimetric quality. This process has potential expansion to numerous disease sites.
Asunto(s)
Planificación de la Radioterapia Asistida por Computador , Radioterapia de Intensidad Modulada , Humanos , Estudios Prospectivos , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia de Intensidad Modulada/métodos , Dosificación Radioterapéutica , Programas InformáticosRESUMEN
BACKGROUND AND PURPOSE: We conducted a prospective, in silico imaging clinical trial to evaluate the feasibility and potential dosimetric benefits of computed tomography-guided stereotactic adaptive radiotherapy (CT-STAR) for the treatment of locally advanced pancreatic cancer (LAPC). MATERIALS AND METHODS: Eight patients with LAPC received five additional CBCTs on the ETHOS system before or after their standard of care radiotherapy treatment. Initial plans were created based on their initial simulation anatomy (PI) and emulated adaptive plans were created based on their anatomy-of-the-day (PA). The prescription was 50 Gy/5 fractions. Plans were created under a strict isotoxicity approach, in which organ-at-risk (OAR) constraints were prioritized over planning target volume coverage. The PI was evaluated on the patient's anatomy-of-the-day, compared to the daily PA, and the superior plan was selected. Feasibility was defined as successful completion of the workflow in compliance with strict OAR constraints in ≥80% of fractions. RESULTS: CT-STAR was feasible in silico for LAPC and improved OAR and/or target dosimetry in 100% of fractions. Use of the PI based on the patient's anatomy-of-the-day would have yielded a total of 94 OAR constraint violations and ≥1 hard constraint violation in 40/40 fractions. In contrast, 39/40 PA met all OAR constraints. In one fraction, the PA minimally exceeded the large bowel constraint, although dosimetrically improved compared to the PI. Total workflow time per fraction was 36.28 minutes (27.57-55.86). CONCLUSION: CT-STAR for the treatment of LAPC cancer proved feasible and was dosimetrically superior to non-adapted CT-stereotactic body radiotherapy.
Asunto(s)
Neoplasias Primarias Secundarias , Neoplasias Pancreáticas , Radiocirugia , Radioterapia Guiada por Imagen , Radioterapia de Intensidad Modulada , Humanos , Órganos en Riesgo , Neoplasias Pancreáticas/diagnóstico por imagen , Neoplasias Pancreáticas/radioterapia , Neoplasias Pancreáticas/cirugía , Estudios Prospectivos , Radiocirugia/métodos , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia Guiada por Imagen/métodos , Radioterapia de Intensidad Modulada/métodos , Tomografía Computarizada por Rayos XRESUMEN
Clinical implementation of online adaptive radiation therapy requires initial and ongoing performance assessment of the underlying auto-segmentation and adaptive planning algorithms, although a straightforward and efficient process for this in phantom is lacking. The purpose of this work was to investigate robustness and repeatability of the artificial intelligence-assisted online segmentation and adaptive planning process on the Varian Ethos adaptive platform, and to develop an end-to-end test strategy for online adaptive radiation therapy. Five synthetic deformations were generated and applied to a computed tomography image of an anthropomorphic pelvis phantom, and reference treatment plans were generated from each of the resulting deformed images. The undeformed phantom was repeatedly imaged, and the online adaptive process was performed including auto-segmentation, review and manual correction of contours, and adaptive plan creation. One adaptive fractions in five different deformation scenarios were performed. The manually corrected contours had a high degree of consistency (> 93% Dice similarity coefficient and < 1.0 mm mean surface distance) across repeated fractions, with no significant variation across the synthetic deformation instance except for bowel (p = 0.026, one-way ANOVA). Adaptive treatment plans also resulted in highly consistent dose-volume values for targets and organs at risk. A straightforward and efficient process was developed and used to quantify a set of organ specific contouring and dosimetric action levels to help establish uncertainty bounds for an end-to-end test on the Varian Ethos system.
Asunto(s)
Planificación de la Radioterapia Asistida por Computador , Radioterapia de Intensidad Modulada , Inteligencia Artificial , Humanos , Órganos en Riesgo , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia de Intensidad Modulada/métodos , Reproducibilidad de los ResultadosRESUMEN
PURPOSE: We conducted a prospective, in silico clinical imaging study (NCT04008537) to evaluate the feasibility of cone beam computed tomography-guided stereotactic adaptive radiation therapy (CT-STAR) for the treatment of abdominal oligometastases. We hypothesized that CT-STAR produces improved dosimetry compared with nonadapted CT-stereotactic body radiation therapy (SBRT). METHODS AND MATERIALS: Eight patients receiving stereotactic body radiation therapy for abdominal oligometastatic disease received 5 additional kV cone beam CTs on the ETHOS system. These additional cone beam CTs were used for imaging during an emulator treatment session. Initial plans were created based on their simulation (PI) and emulated adaptive plans were based on anatomy-of-the-day. The prescription was 50 Gy out of 5 fractions. Organ-at-risk (OAR) constraints were prioritized over planning target volume coverage under a strict isotoxicity approach. The PI was applied to the patient's anatomy-of-the-day and compared with the reoptimized adaptive plans using dose-volume histogram metrics, with selection of the superior plan. Feasibility was defined as completion of the adaptive workflow and compliance with strict OAR constraints in ≥80% of fractions. Fractions were performed under time pressures by a physician and physicist to mimic the adaptive process. RESULTS: CT-STAR was feasible, with successful workflow completion in 38 out of 40 (95%) fractions. PI application to daily anatomy created OAR constraint violations in 30 out of 40 (75%) fractions. There were 8 stomach, 18 duodenum, 16 small bowel, and 11 large bowel PI OAR constraint violations. In contrast, OAR violations occurred in 2 out of 40 (5%) adaptive plans (both small bowel violations, both improved from the PI). CT-STAR also improved gross tumor volume V100 and D95 coverage in 25 out of 40 (63%) and 20 out of 40 (50%) fractions, respectively. Zero out of 40 (0%) fractions were deemed nonfeasible due to poor image quality and/or inability to delineate structures. Adaptation time per fraction was a median of 22.59 minutes (10.97-47.23). CONCLUSIONS: CT-STAR resolved OAR hard constraint violations and/or improved target coverage in silico compared with nonadapted CT-guided stereotactic body radiation therapy for the ablation of abdominal oligometastatic disease. Although limitations of this study include its small sample size and in silico design, the consistently high-quality cone beam CT images captured and comparable timing metrics to prior adaptive studies suggest that CT- STAR is a viable treatment paradigm for the ablation of abdominal oligometastatic disease. Clinical trials are in development to further evaluate CT-STAR in the clinic.
Asunto(s)
Radiocirugia , Radioterapia Guiada por Imagen , Humanos , Órganos en Riesgo , Estudios Prospectivos , Radiocirugia/métodos , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia Guiada por Imagen/métodos , Tomografía Computarizada por Rayos X/métodosRESUMEN
PURPOSE: Disparities in radiation oncology (RO) can be attributed to geographic location, socioeconomic status, race, sex, and other societal factors. One potential solution is to implement a fully mobile (FM) RO system to bring radiotherapy to rural areas and reduce barriers to access. We use Monte Carlo simulation to quantify techno-economic feasibility with uncertainty, using two rural Missouri scenarios. METHODS: Recently, a semimobile RO system has been developed by building an o-ring linear accelerator (linac) into a mobile coach that is used for temporary care, months at a time. Transitioning to a more FM-RO system, which changes location within a given day, presents technical challenges including logistics and quality assurance. This simulation includes cancer census in both northern and southeastern Missouri, multiple treatment locations within a given day, and associated expenditures and revenues. A subset of patients with lung, breast, and rectal diseases, treated with five fractions, was simulated in the FM-RO system. RESULTS: The FM-RO can perform all necessary quality assurance tests as suggested in national medical physics guidelines within 1.5 hours, thus demonstrating technological feasibility. In northern and southeastern Missouri, five-fraction simulations' net incomes were, in US dollars (USD), $1.55 ± 0.17 million (approximately 74 patients/year) and $3.65 USD ± 0.25 million (approximately 98 patients/year), respectively. The number of patients seen had the highest correlation with net income as well as the ability to break-even within the simulation. The model does not account for disruptions in care or other commonly used treatment paradigms, which may lead to differences in estimated economic return. Overall, the mobile system achieved a net benefit, even for the most negative simulation scenarios. CONCLUSION: Our simulations suggest technologic success and economic viability for a FM-RO system within rural Missouri and present an interesting solution to address other geographic disparities in access to radiotherapy.
Asunto(s)
Oncología por Radiación , Simulación por Computador , Estudios de Factibilidad , Humanos , Método de Montecarlo , Aceleradores de PartículasRESUMEN
PURPOSE: Widespread implementation of automated treatment planning in radiation therapy remains elusive owing to variability in clinic and physician preferences, making it difficult to ensure consistent plan parameters. We have developed an open-source class library with the aim to improve efficiency and consistency for automated treatment planning in radiation therapy. METHODS AND MATERIALS: An open-source class library has been developed that interprets clinical templates within a commercial treatment planning system into a treatment plan for automated planning. This code was leveraged for the automated planning of 39 patients and retrospectively compared with the 78 clinically approved manual plans. RESULTS: From the initial 39 patients, 74 of 78 plans were successfully generated without manual intervention. The target dose was more homogeneous for automated plans, with an average homogeneity index of 3.30 for manual plans versus 3.11 for automated plans (P = .107). The generalized equivalent uniform dose (gEUD) was decreased in the femurs and rectum for automated plans, with a mean gEUD of 3746 cGy versus 3338 cGy (P ≤ 0.001) and 5761 cGy versus 5634 cGy (P ≤ 0.001) for the femurs and rectum, respectively. Dose metrics for the bladder and rectum (V6500 cGy and V4000 cGy) showed recognizable but insignificant improvements. All automated plans delivered for quality assurance passed a gamma analysis (>95%), with an average composite pass rate of 99.3% for pelvis plans and 98.8% for prostate plans. Deliverability parameters such as total monitor units and aperture complexity indicated deliverable plans. CONCLUSIONS: Prostate cancer and pelvic node radiation therapy can be automated using volumetric modulated arc therapy planning and clinical templates based on a standardized clinical workflow. The class library developed in this study conveniently interfaced between the plan template and the treatment planning system to automatically generate high-quality plans on customizable templates.
Asunto(s)
Planificación de la Radioterapia Asistida por Computador , Humanos , Masculino , Neoplasias de la Próstata/radioterapia , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador/métodos , Radioterapia de Intensidad Modulada/métodos , Estudios RetrospectivosRESUMEN
PURPOSE: Ethos adaptive radiotherapy (ART) is emerging with AI-enhanced adaptive planning and high-quality cone-beam computed tomography (CBCT). Although a respiratory motion management solution is critical for reducing motion artifacts on abdominothoracic CBCT and improving tumor motion control during beam delivery, our institutional Ethos system has not incorporated a commercial solution. Here we developed an institutional visually guided respiratory motion management system to coach patients in regular breathing or breath hold during intrafractional CBCT scans and beam delivery with Ethos ART. METHODS: The institutional visual-guidance respiratory motion management system has three components: (1) a respiratory motion detection system, (2) an in-room display system, and (3) a respiratory motion trace management software. Each component has been developed and implemented in the clinical Ethos ART workflow. The applicability of the solution was demonstrated in installation, routine QA, and clinical workflow. RESULTS: An air pressure sensor has been utilized to detect patient respiratory motion in real time. Either a commercial or in-house software handled respiratory motion trace display, collection and visualization for operators, and visual guidance for patients. An extended screen and a projector on an adjustable stand were installed as the in-room visual guidance solution for the closed-bore ring gantry medical linear accelerator utilized by Ethos. Consistent respiratory motion traces and organ positions on intrafractional CBCTs demonstrated the clinical suitability of the proposed solution in Ethos ART. CONCLUSION: The study demonstrated the utilization of an institutional visually guided respiratory motion management system for Ethos ART. The proposed solution can be easily applied for Ethos ART and adapted for use with any closed bore-type system, such as computed tomography and magnetic resonance imaging, through incorporation with appropriate respiratory motion sensors.