Macroscopic Property Evaluation of Titania Nanocomposite Polymer Capable of Drawing Double-Network Macrostructure Using Photolithography.

In this study, we developed a double-network hybrid polymer that controls the strength and density of cross-linking points by utilizing the bonds of titania and catechol groups with an o-nitrobenzyl group (ONBg) as the photoreactive cross-linking points. In addition, this hybrid material system, which is composed of thermally dissociable bonds between titania and carboxyl groups, can be molded before light irradiation. The Young's modulus increased by approximately 1000 times upon irradiation with UV light. Moreover, introducing microstructures using the photolithography technique improved the tensile strength and fracture energy by approximately 32 and 15 times, respectively, compared to the sample without the photoreaction. The improved toughness was achieved by the macrostructures, which enhanced the effective cleavage of sacrificial bonds between the carboxyl groups and titania.

Photothermal therapeutic ability of copper open-shell nanostructures that are effective in the second biological transparency window based on symmetry breaking-induced plasmonic properties.

In this study, a photothermal therapy agent that works efficiently in the second biological transparency window was developed based on the localized surface plasmon (LSP) resonance of symmetry-broken open-shell nanostructures of low-cost Cu (CuOSNs). The strong LSP resonance and superior photothermal conversion ability in the second biological transparency window were achieved by generating the dipolar bonding mode due to the plasmon hybridization between the nanoshell dipole and the nanohole dipole at the opening edge in CuOSNs derived from the symmetry breaking of a Cu nanoshell. Oxidative dissolution of CuOSNs in water was significantly suppressed by successive coating with the self-assembled monolayer of 16-mercaptohexadecanoic acid and a thin silica layer. Furthermore, the stability in phosphate buffered saline, which models the biological environment, was attained by further coating the nanoparticles with polyethylene glycol. It was demonstrated from in vitro cell tests using HeLa cells that the cytotoxicity of CuOSNs was effectively suppressed by the surface protection. The viability of HeLa cells incubated with CuOSNs was decreased under the irradiation of low intensity 1060 nm laser with increasing number of CuOSNs. These results demonstrate that low-cost symmetry-broken Cu-based nanostructures can act as an excellent photothermal therapy agent in the second biological transparency window.

Skillful Control of Dispersion and 3D Network Structures: Advances in Functional Organic-Inorganic Nano-Hybrid Materials Prepared Using the Sol-Gel Method.

Organic-inorganic hybrid materials have become indispensable high-performance and highly functional materials. This is owing to the improved dispersion control in hybrid materials and emergence of functional ionic liquids. Harmonization of both these factors has enabled the utilization of functional 3D network structures and nanodispersions in composite materials. Polymeric materials endow materials with flexibility, toughness, and shape-memory properties, whereas inorganic materials provide materials with unique optical, electrical, and magnetic properties due to their nanosize. Organic-inorganic hybrid materials have evolved into novel materials that go beyond the composite rule. In this review, the historical development of hybrid materials prepared using the sol-gel method and the birth of ionic liquids have been summarized. In addition, the historical results leading to the development of functional 3D network structures and dispersion control have also been presented, as well as a review of the research on functional ionic liquids, which are of current interest. The authors also summarize the results of their research on functional ionic liquids. The design of new organic-inorganic hybrid materials has been discussed and the future prospects of new polymer composite materials provided.

Rapid removal of detergent in glycolipids using ionic liquids.

Detergent removal in glycolipid after sample preparation, such as enzymatic reaction or isolation of detergent-resistant membrane microdomain, is indispensable for further structural characterization. We previously established the rapid and effective method of detergent removal in glycolipid samples from glass test tube using 1,2-dichloroethane (DCE) washing. However, the use of DCE has several drawbacks, such as environmental risks, harmful effects (potentially carcinogenic), and high vaporability and flammability. To solve the issue, we used ionic liquids to remove detergents from glycolipid samples, and found 1-butyl-3-methylimidazolium iodide was a suitable alternative for DCE.

Polycarbonate/Titania Hybrid Films with Localized Photo-Induced Magnetic-Phase Transition.

Materials that exhibit the photo-induced magnetic-phase transition of titania are receiving significant attention because they can be easily switched between diamagnetism and paramagnetism by UV irradiation. However, it is difficult to store photo-induced titanium (Ti3+) in air because of its easy oxidation upon oxygen exposure. In this study, titania/polycarbonate hybrid films were prepared using linear 1,6-hexanediol (PHMCD), cyclic 1,4-cyclohexanedimethanol (PCHCD), or their copolymerized carbonate oligomers using the sol-gel method. The oxygen permeability of the hybrid film decreased as the ratio of the ring structure increased by a factor of approximately 32 from PHMCD with only the chain structure to PCHCD with only the ring structure. These hybrid films can generate Ti3+ under a UV irradiation of 250 W for 2 h, and the difference in oxygen permeability significantly affected the lifetime of the Ti3+ by a factor of up to 120. In addition, the tensile tests and IR measurements demonstrated that UV irradiation had little effect on the mechanical intensity and matrix chemical structure. Moreover, the magnetic susceptibility of Ti3+ present in PCHCD was confirmed to be 6.2 (10-3 emu/g(titania)) under an external magnetic field of 5 T induced using a superconducting quantum interference device.

One-pot synthesis of monodisperse CoFe2O4@Ag core-shell nanoparticles and their characterization.

In recent years, monodispersed magnetic nanoparticles with a core/shell structure are expected for their wide applications including magnetic fluid, recoverable catalysts, and biological analysis. However, their synthesis method needs numerous processes such as solvent substitution, exchange of protective agents, and centrifugation. A simple and rapid method for the synthesis of monodispersed core-shell nanoparticles makes it possible to accelerate their further applications. This paper describes a simple and rapid one-pot synthesis of core (CoFe2O4)-shell (Ag) nanoparticles with high monodispersity. The synthesized nanoparticles showed plasmonic light absorption owing to the Ag shell. Moreover, the magnetic property of the nanoparticles had a soft magnetic behavior at room temperature and a hard magnetic behavior at 5 K. In addition, the nanoparticles showed high monodispersity with a low polydispersity index (PDI) value of 0.083 in hexane.

Preparation of Crystallites for Oriented Poly(Lactic Acid) Films Using a Casting Method under a Magnetic Field.

Poly-l-lactic acid (PLLA) has biocompatibility and unique characteristics such as piezoelectric properties. This attracts attention not only in the environmental field but also in the biomedical and electronic materials fields. In recent years, the literature about orienting PLLA crystals has been promoting new applications for PLLA such as high strength fiberization and piezoelectric properties. This paper presents a new technique to orient the PLLA crystalline through casting under magnetic irradiation. The advantage of this technique is that it is possible to radiate the magnetic field to the PLLA crystalline in an extremely low viscosity environment. Moreover, the heat treatment condition was optimized in order to improve the low crystallinity of casting, and it succeeded in producing a PLLA film with a high degree of orientation and high crystallinity. Furthermore, PLLA/1-butyl-3-methylimidazolium dibutylphosphate (bmimjdbp) composite films were prepared under the same conditions, and this also succeeded in the further improvement of crystallinity.

Conformation of poly(γ-glutamic acid) in aqueous solution.

Local conformation and overall conformation of poly(γ-DL-glutamic acid) (PγDLGA) and poly(γ-L-glutamic acid) (PγLGA) in aqueous solution was studied as a function of degree of ionization ε by (1) H-NMR, circular dichroism, and potentiometric titration. It was clarified that their local conformation is represented by random coil over an entire ε range and their overall conformation is represented by expanded random-coil in a range of ε > ε(*) , where ε(*) is about 0.3, 0.35, 0.45, and 0.5 for added-salt concentration of 0.02M, 0.05M, 0.1M, and 0.2M, respectively. In a range of ε < ε(*) , however, ε dependence of their overall conformation is significantly differentiated from each other. PγDLGA tends to aggregate intramolecularly and/or intermolecularly with decreasing ε, but PγLGA still behaves as expanded random-coil. It is speculated that spatial arrangement of adjacent carboxyl groups along the backbone chain essentially affects the overall conformation of PγGA in acidic media.

Control of cell function on a phospholipid polymer having phenylboronic acid moiety.

We synthesized a water-insoluble phospholipid polymer bearing a phenylboronic acid moiety (PMBV), which induces cell adhesion through a specific interaction with the glycoprotein, fibronectin. Surface plasmon resonance analysis revealed that fibronectin was adsorbed on the PMBV surface. When fibroblasts were cultured on the PMBV surface, the cells adhered and proliferated normally while showing a spherical morphology. In addition, the adherent cells were able to detach after the addition of sugar molecules, which bound to phenylboronic acid through an exchange reaction. The cell cycle of adherent cells was evaluated with the embedded HeLa-Fucci cells by using a fluorescent ubiquitination-based cell cycle indicator. The cell-cycle analysis by fluorescence microscopy indicated that the adherent HeLa-Fucci cells tended to converge to the G1 phase. The differentiation of mesenchymal stem cells to chondrocytes was accelerated on PMBV in the presence of bone morphogenetic protein-2. We concluded that PMBV is a useful surface in experiments for assessing cellular function and differentiation.

Conformation of poly(sodium ethacrylate) in solution studied by small-angle X-ray scattering.

The pH-induced conformational transition of poly(sodium ethacrylate) PNaEA in aqueous solution, which occurs between a compact form at low charge-density and an extended coil at high charge-density, was studied by small-angle X-ray scattering and the structure at an each conformational state was analyzed and compared with the corresponding one of poly(sodium methacrylate) PNaMA. The conformational transition for PNaEA induced a remarkable change in the scattering data plotted in the form of the Kratky plot. By comparing the scattering data with theoretical scattering functions, it was clarified that the structures of the compact form and the extended coil are well mimicked by a swollen gel having a network structure and by a wormlike chain, respectively. Although such a structure of the extended coil of PNaEA is similar to the corresponding one of PNaMA, the structure of the compact form of PNaEA is different from the corresponding one of PNaMA, which is still represented by a wormlike chain in a Theta medium.