TiO2-MoS2-PMMA Nanocomposites for an Efficient Water Remediation.

An improvement of water supply and sanitation and better management of water resources, especially in terms of water reuse, is one of the priorities of the European Green Deal. In this context, it is crucial to find new strategies to recycle wastewater efficiently in a low-cost and eco-friendly manner. The immobilization of inorganic nanomaterials on polymeric matrices has been drawing a lot of attention in recent years due to the extraordinary properties characterizing the as-obtained nanocomposites. The hybrid materials, indeed, combine the properties of the polymers, such as flexibility, low cost, mechanical stability, high durability, and ease of availability, with the properties of the inorganic counterpart. In particular, if the inorganic fillers are nanostructured photocatalysts, the materials will be able to utilize the energy delivered by light to catalyze chemical reactions for efficient wastewater treatment. Additionally, with the anchoring of the nanomaterials to the polymers, the dispersion of the nanomaterials in the environment is prevented, thus overcoming one of the main limits that impede the application of nanostructured photocatalysts on a large scale. In this work, we will present nanocomposites made of polymers, i.e., polymethyl methacrylate (PMMA), and photocatalytic semiconductors, i.e., TiO2 nanoparticles (Evonik). MoS2 nanoflakes were also added as co-catalysts to improve the photocatalytic performance of the TiO2. The hybrid materials were prepared using the sonication and solution casting method. The nanocomposites were deeply characterized, and their remarkable photocatalytic abilities were evaluated by the degradation of two common water pollutants: methyl orange and diclofenac. The relevance of the obtained results will be discussed, opening the route for the application of these materials in photocatalysis and especially for novel wastewater remediation.

Titanium Dioxide Nanoparticles: Effects on Development and Male Reproductive System.

Titanium dioxide nanoparticles (TiO2-NPs) are used intensively. Thanks to their extremely small size (1-100 nm), TiO2-NPs are more absorbable by living organisms; consequently, they can cross the circulatory system and then be distributed in various organs including the reproductive organs. We have evaluated the possible toxic effect of TiO2-NPs on embryonic development and the male reproductive system using Danio rerio as an organism model. TiO2-NPs (P25, Degussa) were tested at concentrations of 1 mg/L, 2 mg/L, and 4 mg/L. TiO2-NPs did not interfere with the embryonic development of Danio rerio, however, in the male gonads the TiO2-NPs caused an alteration of the morphological/structural organization. The immunofluorescence investigation showed positivity for biomarkers of oxidative stress and sex hormone binding globulin (SHBG), both confirmed by the results of qRT-PCR. In addition, an increased expression of the gene responsible for the conversion of testosterone to dihydrotestosterone was found. Since Leydig cells are mainly involved in this activity, an increase in gene activity can be explained by the ability of TiO2-NPs to act as endocrine disruptors, and, therefore, with androgenic activity.

Synthesis and Photochemical Properties of Monolithic TiO2 Nanowires Diode.

In this paper, the structural and photochemical properties of a monolithic photochemical diode are discussed. The present structure is composed, from the top to the bottom, of a TiO2 nanowire layer, a TiO2 film, a Ti foil, and a porous layer made of Pt nanoparticles. The synthesis of the nanowires was simply carried out by Au-catalysed-assisted process; the effects of the annealing temperature and time were deeply investigated. Morphological and structural characterizations were performed by scanning electron microscopy and Raman spectroscopy. The analyses showed the rutile structure of the TiO2 nanowires. The photocatalytic properties were studied through the degradation of methylene blue (MB) dye under UV light irradiation. The nanowires induced an enhancement of the photo-degradation rate, compared to TiO2 in a bulk form, due to an increase in the surface area. Moreover, the presence of a nano-porous Pt layer deposited on the rear side of the samples provided a further increase in the MB degradation rate, related to the scavenging effect of Pt nanoparticles. The overall increment of the photo-activity, due to the nano-structuration of the TiO2 and to the presence of the Pt layer, resulted a factor 7, compared to the bulk reference. In addition, photovoltage measurements allowed to assess the effects of TiO2 nano-structuration and Pt nanoparticles on the electron accumulation.

Suitability of Different Titanium Dioxide Nanotube Morphologies for Photocatalytic Water Treatment.

Photocatalysis has long been touted as one of the most promising technologies for environmental remediation. The ability of photocatalysts to degrade a host of different pollutants, especially recalcitrant molecules, is certainly appealing. Titanium dioxide (TiO2) has been used extensively for this purpose. Anodic oxidation allows for the synthesis of a highly ordered nanotubular structure with a high degree of tunability. In this study, a series of TiO2 arrays were synthesised using different electrolytes and different potentials. Mixed anatase-rutile photocatalysts with excellent wettability were achieved with all the experimental iterations. Under UVA light, all the materials showed significant photoactivity towards different organic pollutants. The nanotubes synthesised in the ethylene glycol-based electrolyte exhibited the best performance, with near complete degradation of all the pollutants. The antibacterial activity of this same material was similarly high, with extremely low bacterial survival rates. Increasing the voltage resulted in wider and longer nanotubes, characteristics which increase the level of photocatalytic activity. The ease of synthesis coupled with the excellent activity makes this a viable material that can be used in flat-plate reactors and that is suitable for photocatalytic water treatment.

Innovative Polymeric Hybrid Nanocomposites for Application in Photocatalysis.

The immobilization of inorganic nanomaterials on polymeric substrates has been drawing a lot of attention in recent years owing to the extraordinary properties of the as-obtained materials. The hybrid materials, indeed, combine the benefits of the plastic matter such as flexibility, low-cost, mechanical stability and high durability, with them deriving from their inorganic counterparts. In particular, if the inorganic fillers are nanostructured photocatalysts, the originated hybrid systems will be able to utilize the energy delivered by light, catalysing chemical reactions in a sustainable pathway. Most importantly, since the nanofillers can be ad-hoc anchored to the macromolecular structure, their release in the environment will be prevented, thus overcoming one of the main restrictions that impedes their applications on a large scale. In this review, several typologies of hybrid photocatalytic nanomaterials, obtained by using both organic and inorganic semiconductors and realized with different synthetic protocols, were reported and discussed. In the first part of the manuscript, nanocomposites realized by simply blending the TiO2 or ZnO nanomaterials in thermoplastic polymeric matrices are illustrated. Subsequently, the atomic layer deposition (ALD) technique is presented as an excellent method to formulate polymeric nanocomposites. Successively, some examples of polyporphyrins hybrid systems containing graphene, acting as photocatalysts under visible light irradiation, are discussed. Lastly, photocatalytic polymeric nanosponges, with extraordinary adsorption properties, are shown. All the described materials were deeply characterized and their photocatalytic abilities were evaluated by the degradation of several organic water pollutants such as dyes, phenol, pesticides, drugs, and personal care products. The antibacterial performance was also evaluated for selected systems. The relevance of the obtained results is widely overviewed, opening the route for the application of such multifunctional photocatalytic hybrid materials in wastewater remediation.

Artemia salina: A microcrustacean to assess engineered nanoparticles toxicity.

The focus of this work was to investigate the toxicity of different metal nanoparticles (gold nanoparticles [AuNPs], silver nanoparticles [AgNPs], titanium dioxide nanoparticles [TiO2 NPs]) on brine shrimp Artemia salina. We investigated if nanoparticles could have an influence on hatching of cysts and on mortality of larvae. Larvae (also called nauplii) and cysts were exposed to NPs for 24 hr in artificial seawater on microplates. At the end of the test, we assessed the endpoint (immobility/death) for the larvae by a stereomicroscope. Nauplii that appeared completely motionless, were counted as dead, and the percentages of mortality were calculated for each treatment. Instead for the cysts, the percentages of not-hatched nauplii for each concentration considered were calculated by counting the number of whole cysts. Currently, nanoparticles toxicity has been investigated in several research; in our study we highlighted the nontoxicity of TiO2 NPs on A. salina nauplii as shown by low percentages of immobilization and on cysts because TiO2 NPs do not affect their hatching. Despite AuNPs exerted toxic effects on hatching, they did not affect larvae development as well as TiO2 NPs. Otherwise, AgNPs induced mortality of the larvae and inhibited cysts hatching.

Toxicity assessment of two-dimensional nanomaterials molybdenum disulfide in Gallus gallus domesticus.

Recently two-dimensional nanomaterials, such as graphene and molybdenum disulfide (MoS2), have received much attention as adsorbent materials for the effective removal of organic contaminants. MoS2 is attracting attention, not only for its chemical-physical properties, but also for its wide availability in nature as a constituent of molybdenite. The aim of this investigation was to assess the effects of different MoS2 concentrations (5 × 10-1, 5 × 10-2 and 5 × 10-3 mg/ml) on the embryonated eggs of Gallus gallus domesticus, according to Beck method. We evaluated the toxic effect of the MoS2 powder purchased at Sigma-Aldrich indicated as "received" and MoS2 powder treated via mechanical milling indicated as "ball mille". Subsequently, the embryos were sacrificed at different times of embryonic development (11th, 15th and 19th day after incubation) in order to evaluate their embryotoxic and teratogenic effects. The alterations of the embryonic development were studied by morphological and immunohistochemical analysis of the tissues. The results obtained have shown the toxicity of both powders of MoS2 with a high percentage of deaths and growth delays. Moreover, the immunohistochemical analysis performed on several tissue sections showed a strong positivity to the anti-metallothionein1 antibody only for the erythrocytes.

Ag/ZnO/PMMA Nanocomposites for Efficient Water Reuse.

This work attempts to produce photocatalytic surfaces for large-scale applications by depositing nanostructured coatings on polymeric substrates. ZnO/poly(methyl methacrylate) (PMMA) composites were prepared by low-temperature atomic layer deposition (ALD) of ZnO on PMMA substrates. In addition, to increase the photocatalytic and antibacterial activities of ZnO films, Ag nanoparticles were added on ZnO surfaces using plasma-enhanced ALD. The morphology, crystallinity, and chemical composition of the specimens were meticulously examined by scanning and transmission electron microscopies, energy-dispersive X-ray spectroscopy, and X-ray diffraction analyses. The noteworthy photocatalytic activity of the nanocomposites was proved by the degradation of the following organic pollutants in aqueous solution: methylene blue, paracetamol, and sodium lauryl sulfate. The antibacterial properties of the samples were tested using Escherichia coli as a model organism. Moreover, the possible toxic effects of the specimens were checked by biological tests. The present results unambiguously indicate the Ag/ZnO/PMMA nanocomposite as a powerful tool for an advanced wastewater treatment technology.

Toxicity assessment of nano-TiO2 in Apis mellifera L., 1758: histological and immunohistochemical assays.

The aim of this study was to evaluate the toxicity of titanium dioxide nanoparticles (TiO2 NPs) by short-term toxicity tests in Apis mellifera, considered an excellent bioindicator organism mainly due to its sensitivity. Bees have been exposed to several concentrations of TiO2 NPs (1 × 10-3 , 1 × 10-4 , 1 × 10-5 , 1 × 10-6 mg/10 ml) for 10 days. Morphostructural and histological assays were done on gut and honey sac. The research of exposure biomarkers like metallothioneins 1 (MT1) and Heat Shock Protein 70 (HSP70) was performed to verify if a detoxification mechanism has been activated in the exposed animals. No histological alteration on the epithelium of the gut and honey sac were observed in exposed samples. A significant positivity for anti-MT1 antibody was observed only in the honey sac cells. A weak positivity for HSP70 was observed in both structures analyzed. In several studies have shown the non-toxicity of TiO2 NPs on other model organisms, in our study, titanium dioxide nanoparticles was proven to be highly toxic at the highest concentration tested (100% of lethality to 1 × 10-3 mg/10 ml) and moderately toxic at lower concentrations. Honey bees proved to be excellent models for study of NPs toxicity and for monitoring environment.

Morphostructural and immunohistochemical study for evaluation of nano-TiO2 toxicity in Armadillo officinalis Duméril, 1816 (Crustacea, Isopoda, Oniscidea).

Invertebrates are precious organisms in order to study environmental pollution. In particular, they appear to be suitable as a bioindicator species for pioneer ecotoxicity studies on new xenobiotics such as nanoparticles. In fact, they are able to absorb nanomaterials scattered in the environment in different ways and it's known the compartmentalization of nano-sized contaminants in selected tissues and intracellular organelles. Titanium dioxide represents the most used nanoparticulate, destined to become probably ubiquitous in the environment. Recently, some research has been published on the toxic potential of nano-TiO2 in several animal species. Among all invertebrates, Oniscidean Isopods are the only taxon of Crustaceans that has become completely terrestrial, known as excellent bioindicators and bioaccumulators. They have a digestive gland, the hepatopancreas, which is the location of election for the accumulation of pollutants. For this reason, they are considered efficient animal models to ecological studies. For this study, we collected Armadillo officinalis from Natural Oriented Reserve of "Vendicari" (Sicily, Italy), to evaluate the toxicity of titanium dioxide (TiO2 ) on their hepatopancreas, after a short period of exposure. We conducted morphostructural and immunohistochemistry assays. The results suggested a great capacity of the species of bioaccumulation of nanoparticles in the hepatopancreas, where a strong positivity to the metallothioneins was highlighted. Our study confirms that Oniscidean Isopods, in particular Armadillo officinalis, proved to be an appropriate indicator of pollution in terrestrial ecosystems from nanoparticles.

Evaluation of the effects of silver nanoparticles on Danio rerio cornea: Morphological and ultrastructural analysis.

Although in recent years there has been intensification in the use of nanoparticles (NPs) for the production of many commercial products, few studies have been carried out to assess the risks associated with its use. Among the most used NPs, silver nanoparticles (AgNPs) have a preponderant position as they have various applications. In this study, 40 adult zebrafish were exposed to increasing concentrations of AgNPs (8, 45, and 70 µg/L) for 30 days to evaluate the effects on eyes after chronic exposure to AgNPs with an average diameter of 50 nm. From the morphological and ultrastructural analysis performed, no alteration or lesions of the corneal epithelium were detected.

Mechanical milling: a sustainable route to induce structural transformations in MoS2 for applications in the treatment of contaminated water.

Two-dimensional (2D) nanomaterials have received much attention in recent years, because of their unusual properties associated with their ultra-thin thickness and 2D morphology. Besides graphene, a new 2D material, molybdenum disulfide (MoS2), has attracted immense interest in various applications. On the other hand, ball-milling process provides an original strategy to modify materials at the nanometer scale. This methodology represents a smart solution for the fabrication of MoS2 nanopowders extremely-efficient in adsorbing water contaminants in aqueous solution. This work reports a comprehensive morphological, structural, and physicochemical investigation of MoS2 nanopowders treated with dry ball-milling. The adsorption performances of the produced nanopowders were tested using methylene blue (MB) dye and phenol in aqueous solution. The adsorption capacity as a function of ball-milling time was deeply studied and explained. Importantly, the ball-milled MoS2 nanopowders can be easily and efficiently regenerated without compromising their adsorption capacity, so to be reusable for dye adsorption. The eventual toxic effects of the prepared materials on microcrustacean Artemia salina were also studied. The present results demonstrate that ball-milling of MoS2 offers a valid method for large-scale production of extremely efficient adsorbent for the decontamination of wastewaters from several pollutants.

Surface modification by vanadium pentoxide turns oxide nanocrystals into powerful adsorbents of methylene blue.

HYPOTHESIS: If nanocrystals of such semiconductor as SnO2 and TiO2, which are not known as powerful adsorbents, have their surface modified by layer of V2O5, how will the adsorption properties be affected? Answering this question would provide a new set of surface properties to be designed by surface engineering of oxide nanocrystals. EXPERIMENTS: SnO2 and TiO2 colloidal nanocrystals were prepared by coupling sol-gel and solvothermal synthesis. By co-processing with V chloroalkoxide and subsequent heat-treatment at 400-500 °C, surface deposition of V2O5 layers was obtained. The methylene blue adsorption onto the prepared materials was tested and compared with the pure oxide supports. Cycling of the materials and analysis of the adsorption process was also investigated. FINDINGS: The V-modified nanocrystals extracted ∼80% methylene blue from 1.5 × 10-5 M aqueous solution after 15 min only, contrarily to pure materials, which took up only 30% of the dye even after 120 min. Comparison with pure commercial V2O5 showed that the peculiar adsorption properties were imparted by the surface deposition of the V2O5-like layers. This report demonstrates that new classes of adsorbing materials can be conceived by suitably coupling different metal oxides.

ZnO-pHEMA Nanocomposites: An Ecofriendly and Reusable Material for Water Remediation.

The design of new hybrid nanocomposites based on poly(2-hydroxyethylmethacrylate) (pHEMA) graphene oxide (GO) cryosponges, wherein ZnO nanolayers have been deposited to induce photocatalytic properties, is reported here. Atomic layer deposition at low temperature is specifically selected as the deposition technique to stably anchor ZnO molecules to the pendant polymer OH groups. Furthermore, to boost the pHEMA cryogel adsorption capability versus organic dyes, GO is added during the synthetic procedure. The morphology, the crystallinity, and the chemical composition of the samples are deeply investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction analyses, Fourier transform infrared spectroscopy, and thermogravimetric analysis. Swelling properties, mechanical performance, and adsorption kinetics models of the hybrid materials are also evaluated. Finally, the adsorption and photocatalytic performance are tested and compared for all of the samples using methylene blue as a dye. Particularly, the adsorption efficiency of ZnO/pHEMA and ZnO/pHEMA-GO nanocomposites, as well as their in situ regeneration via photocatalysis, renders such devices very appealing for advanced wastewater treatment technology.

Optical and photocatalytic properties of TiO2 nanoplumes.

Here we report the photocatalytic efficiency of hydrogenated TiO2 nanoplumes studied by measuring dye degradation in water. Nanoplumes were synthesized by peroxide etching of Ti films with different thicknesses. Structural characterization was carried out by scanning electron microscopy and transmission electron microscopy. We investigated in detail the optical properties of the synthesized material and related them to the efficiency of UV photodegradation of methylene blue dye. The obtained results show that TiO2 nanoplumes act as an effective antireflective layer increasing the UV photocatalytic yield of the film.

Novel synthesis of ZnO/PMMA nanocomposites for photocatalytic applications.

The incorporation of nanostructured photocatalysts in polymers is a strategic way to obtain novel water purification systems. This approach takes the advantages of: (1) the presence of nanostructured photocatalyst; (2) the flexibility of polymer; (3) the immobilization of photocatalyst, that avoids the recovery of the nanoparticles after the water treatment. Here we present ZnO-polymer nanocomposites with high photocatalytic performance and stability. Poly (methyl methacrylate) (PMMA) powders were coated with a thin layer of ZnO (80 nm thick) by atomic layer deposition at low temperature (80 °C). Then the method of sonication and solution casting was performed so to obtain the ZnO/PMMA nanocomposites. A complete morphological, structural, and chemical characterization was made by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analyses. The remarkable photocatalytic efficiency of the nanocomposites was demonstrated by the degradation of methylene blue (MB) dye and phenol in aqueous solution under UV light irradiation. The composites also resulted reusable and stable, since they maintained an unmodified photo-activity after several MB discoloration runs. Thus, these results demonstrate that the proposed ZnO/PMMA nanocomposite is a promising candidate for photocatalytic applications and, in particular, for novel water treatment.

Liquid-Phase Monolayer Doping of InGaAs with Si-, S-, and Sn-Containing Organic Molecular Layers.

The functionalization and subsequent monolayer doping of InGaAs substrates using a tin-containing molecule and a compound containing both silicon and sulfur was investigated. Epitaxial InGaAs layers were grown on semi-insulating InP wafers and functionalized with both sulfur and silicon using mercaptopropyltriethoxysilane and with tin using allyltributylstannane. The functionalized surfaces were characterized using X-ray photoelectron spectroscopy (XPS). The surfaces were capped and subjected to rapid thermal annealing to cause in-diffusion of dopant atoms. Dopant diffusion was monitored using secondary ion mass spectrometry. Raman scattering was utilized to nondestructively determine the presence of dopant atoms, prior to destructive analysis, by comparison to a blank undoped sample. Additionally, due to the As-dominant surface chemistry, the resistance of the functionalized surfaces to oxidation in ambient conditions over periods of 24 h and 1 week was elucidated using XPS by monitoring the As 3d core level for the presence of oxide components.

Evaluation of Chronic Nanosilver Toxicity to Adult Zebrafish.

Nanotechnology is rapidly growing with nanoparticles produced and utilized in a wide range of commercial products worldwide. Among the different types of nanomaterials produced, silver nanoparticles (AgNPs) occupy a predominant position and they are used in electronics, clothing, food industry, cosmetics and medical devices. Nanosilver has also showed excellent performance in antibacterial application. Nowadays, the increasing use of AgNPs has put the evidence on their possible toxicity to the human health and the impact on the environment. This paper focus on adverse effects of AgNPs in adult of Danio rerio. Fishes exposed to increasing concentrations (8, 45, and 70 µg/l) silver nanoparticles (AgNPs, 25 nm in average diameter) and after treatment for 30 days, was quickly euthanized in MS-222. We have evaluated bioaccumulation of AgNPs using ICP-MS and analyzed histological changes, biomarkers of oxidative damage and gene expression in the gut, liver and gills tissues of AgNPs-treated zebrafish. The histological analysis showed lesions of secondary lamellae of the gills with different degrees of toxicity such as hyperplasia, lamellar fusion, subepithelial edema, and even in some cases telangiectasia. Huge necrosis of the intestinal villi was found in the gut. No lesion was detected in the liver. The analysis revealed a high expression of metallothioneins 1 (MTs 1) in animals exposed to AgNPs compared to the control group. The ICP-MS analysis shows that the amount of particles absorbed in all treated samples is almost the same. We can affirm that AgNPs toxicity linked more to their size and state of aggregation than to their concentrations. Silver nanoparticles can damage gills and gut because they are able to pass through the mucosal barrier thanks to their small size. The damage is still reversible because it is not documented injury to the basal membrane.

Toxicity Evaluation of New Engineered Nanomaterials in Zebrafish.

The effect of the nanoparticles on the marine organisms, depends on their size, chemical composition, surface structure, solubility and shape. In order to take advantage from their activity, preserving the surrounding environment from a possible pollution, we are trying to trap the nanoparticles into new nanomaterials. The nanomaterials tested were synthesized proposing a ground-breaking approach by an upside-down vision of the Au/TiO2 nano-system to avoid the release of nanoparticles. The system was synthesized by wrapping Au nanoparticles with a thin layer of TiO2. The non-toxicity of the nano-system was established by testing the effect of the material on zebrafish larvae. Danio rerio o zebrafish was considered an excellent model for the environmental biomonitoring of aquatic environments and the Zebrafish Embryo Toxicity Test (ZFET) is considered an alternative method of animal test. For this reason zebrafish larvae were exposed to different concentrations of nanoparticles of TiO2 and Au and new nanomaterials. As biomarkers of exposure, we evaluated the expression of metallothioneins by immunohistochemistry analysis and western blotting analysis also. The results obtained by toxicity test showed that neither mortality as well as sublethal effects were induced by the different nanomaterials and nanoparticles tested. Only zebrafish larvae exposed to free Au nanoparticles showed a different response to anti-MT antibody. In fact, the immunolocalization analysis highlighted an increase of the metallothioneins synthesis.

Effect of Pt Nanoparticles on the Photocatalytic Activity of ZnO Nanofibers.

For this study, we originally realized ZnO nanofibers (∼50 nm in mean radius) mixed with Pt nanoparticles (∼30 nm in mean radius), prepared by pulsed laser ablation in liquid, and investigated their photocatalytic performance. The material was synthesized by the simple electrospinning method coupled with subsequent thermal treatments. Methylene blue was employed as a representative dye pollutant to evaluate the photocatalytic activity of the nanofibers. It was found that the Pt-ZnO fibers exhibit a photodegradation reaction rate that is ∼40 % higher than the one obtained for reference ZnO fibers. These encouraging results demonstrate that Pt-ZnO nanofibers can be fruitfully applied for environmental applications.