Microscopic in-situ analysis of the mucosal healing around implants treated by protease activated receptor 4-agonist peptide or perpendicularly protruded type I collagen in rats.

Enhanced mucosal sealing around titanium implants can reduce complications such as peri-implantitis. The present study aims to investigate the mucosal healing at the early stage around the protease activated receptor 4-agonist peptide (PAR4-AP)- or perpendicularly protruded type I collagen (pCol)-treated titanium implants. A total of 72 implants were placed in 36 rats in the study. Following extractions, two tissue-level implants among the following three different surfaces, PAR4-AP-coated (PAR4 group, n = 24), pCol-treated (pCol group, n = 24) and non-treated (control group, n = 24) ones, were placed in the maxillae of each rat based on a split-mouth design. The specimens retrieved at 8 h (n = 8 per group), 3 days (n = 8 per group), and 2 weeks (n = 8 per group), were immunostained and tissue-cleared, and the signals of laminin-5 and collagen fibers were observed under multiphoton microscopy. Statistical analyses were performed using linear mixed model with post hoc tests to compare differences between the groups. While there was no intergroup difference at 8 h, the laminin-5 at 3 days was more abundant near the PAR4-group-surface, and its area was significantly larger in the PAR4 group (0.0204 ± 0.0194 mm2 ) than the control (0.0019 ± 0.0025 mm2 , p = .001) and pCol (0.0023 ± 0.0022 mm2 , p < .001) groups. The pCol group showed a significantly larger area of collagen fibers (0.0230 ± 0.0148 mm2 ) compared to the control (0.0035 ± 0.0051 mm2 , p = .002) and PAR4 (0.0031 ± 0.0057 mm2 , p < .001) groups at 3 days. At 3 days and 2 weeks, the collagen fiber orientation of the pCol group showed a more perpendicular manner compared to the control and PAR4 groups. The signal of basal lamina and collagen fibers were stronger around the PAR4-AP- and pCol-treated titanium surfaces, respectively during the early healing stage. This could have implications for improved mucosal sealing around dental implants, potentially reducing complications such as peri-implantitis.

Accuracy of impression scan bodies for complete arch fixed implant-supported restorations.

STATEMENT OF PROBLEM: Despite the extensive studies on and comparisons of different implant impression techniques for completely edentulous patients, studies on novel techniques that combine conventional impression making with digital scanning are lacking. PURPOSE: The primary aim of this study was to compare the accuracy of the impression scan body technique with conventional impression making and digital scanning for a completely edentulous mandibular arch. The secondary aim was to assess the relationship between different implant angulations and interimplant distances in relation to the recording accuracy. MATERIAL AND METHODS: An edentulous mandibular definitive cast (control) was designed with 5 implants placed at different angles and interimplant distances. Three recording techniques were tested: a conventional impression with splinted copings (conventional) (n=15), an impression scan body technique where impression scan bodies were attached to the splinted impression copings in a conventional elastomeric impression and then digitally scanned with an extraoral scanner (n=15), and an intraoral digital scanning technique (digital) (n=15). For comparison, the definitive cast and the conventional impression stone casts were digitized into standard tessellation language (STL) datasets using the extraoral scanner. The 3-dimensional (3D) deviations between the 3 test groups and the control were calculated by superimposing the STL datasets. The 3D deviations from the control were compared by using the Kruskal-Wallis test followed by the Dunn post hoc test (α=.05). The Mann-Whitney test was used to investigate the effect of implant angulation and interimplant distance on impression accuracy (α=.05). RESULTS: The conventional splinted-coping impression technique showed a mean 3D deviation of 0.408 mm. The impression scan body and intraoral digital scan showed similar mean 3D deviations, 0.219 mm and 0.257 mm, respectively (P=.334). Both techniques showed significantly lower 3D deviations than the conventional technique (P<.001). Implants at an angle of 5 degrees and 10 degrees showed a statistically significant difference (P=.010) with mean 3D deviations of 0.340 mm and 0.396 mm, respectively. Implants with 5-mm and 10-mm interimplant distance showed a significant difference (P<.001) with mean 3D deviations of 0.301 mm and 0.423 mm, respectively. CONCLUSIONS: The impression scan body technique is comparable with intraoral digital scanning for a completely edentulous arch. Increased implant angulation and increased interimplant distance significantly reduced the accuracy of implant impression making or scanning.

The Guided Bone Regeneration of a Large, Non-Contained, Perforated Maxillary Anterior Perforation Defect: A Case Report.

The reconstruction of alveolar ridge defects can be challenging, especially when the lesion is large, non-contained, and located in the esthetic region. The present report describes the guided bone regeneration (GBR) procedure and prosthetic rehabilitation of a severe perforation defect in the anterior maxilla. Clinical and radiographic evaluation of the lesion indicated an endodontic-periodontal origin, and biopsy results confirmed the absence of malignancy. GBR was performed with the use of cortical mineralized freeze-dried bone allograft (FDBA) combined with recombinant human platelet derived growth factor BB (rhPDGF-BB) and a resorbable collagen membrane without the use of tenting or fixation screws. At six months post-GBR, cone beam computed tomography (CBCT) revealed adequate bone fill for the placement of 4.1 x 10 mm or 4.1 x 12 mm dental implants. The implant surgery was fully guided with a two-stage approach. After a ten-month of healing phase, the implants were loaded with a screw-retained porcelain bridge. The staged GBR approach using a combination of FDBA, rhPDGF-BB, and a resorbable membrane without the use of tenting or fixation screws resulted in significant bone fill, successful implant placement, and a functional and esthetic implant-supported prosthesis.

Comprehensive Assessment of the Universal Healthcare System in Dentistry Japan: A Retrospective Observational Study.

Japan's universal healthcare insurance is facing economic challenges due to the advanced aging society, however, objective data of dental expenditure has never been introduced. This study aimed to identify the associated factors with dental expenditures using government-provided digitized insurance claims data and calculated the spending in the context of dental cost per person (DCPP). Seven associated factors analyzed were age, demographic, geographic, socioeconomic, regional wealth, the impact of the 8020-national campaign implementation (keep 20 teeth at age 80), and the effect of the home-visit dentistry for the elders. The average DCPP was high in older populations (75+) in all prefectures. The prefectures with the highest and lowest DCPP were significant compared to other states and retained their respective places in the cost hierarchy over the four years. The prefectures with more citizens participating in government assistance programs (GAP) had greater DCPPs. Dental costs were significantly related to geographic regions, age, per capita income, government assistance program prevalence, office complete denture frequency, and home visit care per patient. With a growing aging population, dental care costs will continue to increase, burdening its fiscal future. Associated factors identified should be considered to control the contentious increase of healthcare cost.

Current Implementation of Digital Dentistry for Removable Prosthodontics in US Dental Schools.

Objectives: Although digital technology has been widely integrated into dental education, there is limited literature investigating the extent of the integration of computer-aided design and computer-aided manufacturing (CAD-CAM) for removable systems in the dental curriculum. The purpose of this study was to assess the current implementation of CAD-CAM complete and partial dentures in predoctoral (PP) and advanced graduate prosthodontic (AGP) education in US dental schools. The study also aimed to identify potential barriers to its implementation in the dental curriculum. Methods: An online survey with 15 questions was created using online survey software. The survey was distributed to the directors of predoctoral prosthodontics in 56 schools and advanced graduate programs of prosthodontics in 52 schools listed in the 2018-19 American Dental Education Association (ADEA) Directory. Results: The percentage of programs (PP and AGP) implementing CAD-CAM complete dentures (CAD-CAM CDs) and CAD-CAM removable partial dentures (CAD-CAM RPDs) in their didactic, preclinical, and clinical curricula was recorded. CAD-CAM CDs are taught in didactic courses in 54.2% of PP and 65.2% of AGP. However, CAD-CAM RPDs are only taught in 37.5% of PP and 47.8% of AGP. Programs are largely limited by a lack of funds, resources, time, and faculty members. Conclusion: While digital technologies have indeed become more prevalent in dental education, many institutions face barriers to implementation. More research must be conducted in order to support the continued incorporation of digital technologies into dental education.

Accuracy of a Method to Monitor Root Position Using a 3D Digital Crown/Root Model during Orthodontic Treatments.

This study aimed to assess the accuracy of a method of predicting post-movement root position during orthodontic treatment using a 3D digital crown/root model (3DCRM) created with pre-movement records of both cone-beam computed tomography (CBCT) and dental arch digital scans. Pre- and post-movement CBCT scans and dental arch digital scans of five patients who had completed orthodontic treatments were used in this study. The 3DCRM was superimposed onto the post-movement scanned dental arch to identify the post-movement root position (test method). Post-movement CBCT (referenced as the current method) served as the control to identify the actual post-movement root position. 3D-coordinate analysis revealed no significant differences between the test and current methods along the X and Y axes. However, the discrepancy on the Z axis (especially in cases of intrusion) was greater than that in all other directions for all three tooth types examined (p < 0.05). A strong positive correlation between the degree of discrepancy and the distance of tooth movement was observed on the Z axis (r = 0.71). The 3DCRM method showed promising potential to accurately predict root position during orthodontic treatments without the need for a second CBCT. However, root resorption, which affected the Z axis prediction, needs to be closely monitored using periapical radiographs to complement this method.

Importance of bitewing radiographs for the early detection of interproximal carious lesions and the impact on healthcare expenditure in Japan.

BACKGROUND: Globally, the direct cost of dental caries is approximately $298B yearly, consuming 5-10% of national healthcare budgets. Bitewing radiographs (BWR) are the standard method of diagnosing interproximal dental caries. In Japan, bitewing radiographs are rarely used. This retrospective observational study was conducted to measure the potential economic impact of carious lesions left undiagnosed and untreated due to this omission of bitewing radiographs. METHODS: The total number of existing carious lesions, the number of undiagnosed lesions, and costs of treating these lesions were calculated from the national database of Ministry of Health, Labor and Wellness in Japan between June 2013 and 2017. The number of affected teeth was estimated using prevalence data and undiagnosed lesions were estimated. The expense associated with treating progressed lesions was calculated using the standard Japanese fee structure. BWR trends were assessed, and analyses were performed to understand the differences between states and populations over time. RESULTS: The average number of BWR taken monthly per office was 48.3±1.1 (average ± SD). It was calculated that an average of 6,429,155 lesions went undiagnosed per month, 93.5 teeth per practice, and 1.6 teeth per patient. The cost of treating lesions that went undiagnosed and then progressed into more invasive restorations was estimated to be between $57M-$218M more (difference between NaF varnish and class II restorations), and $150M-$443M more (difference between Class II restoration and crown or crown with RCT). CONCLUSIONS: BWRs are crucial in diagnosing a significant number of carious lesions. There is considerable impact on health and cost to the national health system due to undiagnosed lesions. Practitioners need to be educated on reading and understanding BWR, and policy should be changed to cover BWR.

3D digital analysis of tooth movement with magnets and elastics in vitro.

OBJECTIVES: Magnets have many advantages in orthodontics, and our previous studies confirmed their therapeutic potential through 3D-data analysis. The aim of this study was to compare tooth movements, including rotation, obtained via magnetic and elastic forces in crowded cases in vitro. METHODS: Typodont models mimicking a crowded case were prepared. In the magnetic force-driven orthodontics (MG) group, Nd-Fe-B magnets were attached to the labial surfaces from UR4 to UL4 for attracting force, and to UR6 and UL6 for repulsing force. For the elastic force-driven orthodontic (EL) group, brackets were placed on labial surfaces from UR2 to UL2 with power-chain elastics. A NiTi archwire was used in both groups. The models were 3D scanned before and after tooth movement and exported as STL files. The pre- and post-movement STL files were superimposed. The 3D coordinates of the measurement points of the crown and root apex were obtained, and tooth displacement, 3D movements (X, Y, and Z-axis), and rotation (yaw, pitch, and roll) were calculated. Two-tailed Student's t-test was performed for comparison of the results between MG and EL groups (n = 3). RESULTS: Overall, both groups indicated similar movement and rotation to achieve the planned arch form. In the crown movement and rotation, no significant differences were observed between MG and EL groups. However, in the root movement, there was a significant difference between MG and EL groups in X and Z axis for the canines. CONCLUSIONS: Magnetic force-driven orthodontics demonstrated comparable results to elastics with less tipping movement, suggesting a potential future orthodontic modality. CLINICAL SIGNIFICANCE: This in vitro study showed the potential of magnetic force for orthodontic application. The magnetic force-driven orthodontics might provide less tipping tooth movement compared to conventional methods, such as power chains, and could be a future technique for comprehensive orthodontic treatment.

Efficacy of bisphosphonates in detection of early enamel caries using NIR fluorescence imaging and inhibition of caries progression.

NIR fluorescence imaging using bisphosphonate-Indocyanine green has been indicated for early interproximal caries detection. This study assessed diagnostic accuracy of caries detection by NIR fluorescence imaging with OsteoSense 750® (OS750) in vitro and ex vivo, and to analyze the therapeutic efficacy of a bisphosphonate (Etidronate) in inhibiting enamel caries progression in vitro. Methods: Four experiments were conducted using extracted human teeth; 1) to calculate the infiltration rate of OS750 into interproximal white spot lesions using fluorescence microscope, 2) to assess diagnostic accuracy of interproximal natural white spot lesions using desktop NIR fluorescence imaging device in vitro setting, 3) to assess diagnostic accuracy of artificially created deeper enamel carious lesion (0.5 mm~1.0 mm) using NIR fluorescence image through the head-mount display in ex vivo setting, 4) to compare the progression on the enamel caries lesions treated by Etidronate, NaF and distilled-water. Diagnostic accuracy was analyzed using sensitivity, specificity and receiver operating curves (ROC). The caries progression was calculated with micro-CT and was statistically analyzed using a two-way ANOVA and the Tukey HDS post-hoc test. Results: 1) The infiltration rate of OS750 was 101.83% ± 8.66 (Min: 90.10%, Max: 133.94%). 2) The average of sensitivity and specificity in vitro setting experiments were 86.7% ± 4.4% and 70% ± 11%, respectively. The average of area under the ROC curves (AUC) was 0.883 ± 0.059 indicating excellent performance. 3) The mean sensitivity and specificity in ex vivo setting was 82.97% ± 15% and 76.78% ± 13.27% respectively. 4) The carious lesion volume treated by Etidronate was significantly smaller at post treatment-1 (p<0.05) and treatment-2 (p<0.01) than the control. There was no significant difference in lesion volume in the Etidronate and NaF group at the time point of post treatment-1. Conclusion: This study suggests that bisphosphonates contribute to both early diagnosis of enamel caries and inhibition of caries progression.

An In Vivo Spectrophotometric Analysis of Gingival Acrylic Shade Guide.

Selecting shades of acrylic gingival restorative material is challenging. This study examined the shade appropriateness of five acrylic gingival restorative materials. The color was analyzed using an intraoral spectrophotometer (Crystaleye®, Olympus). The gingival color of maxillary incisors for eighty-nine patients was measured. CIELAB color coordinates (L*, a* and b*) were obtained, and the color difference ∆E (Coverage Error: CE) between shade tabs and natural gingival color of patient samples for each shade guide system were compared. Repeated ANOVA and post hoc analyses with Tukey's HSD were performed. There was a significant difference among the mean minimum CEs of the tab sets (p < 0.01). GC Acrylic (CE = 5.89 ∆E ± 2.97) and Lucitone 199® (CE = 6.55 ± 3.33) groups exhibited CEs significantly lower than all other groups (all p < 0.001). The IvoCap® system exhibited the highest CE (10.78 ± 3.80), significantly greater than all other groups (p < 0.001). No significant differences were observed based on sex (p = 0.055) or ethnicity (p = 0.327). The GC Acrylic and Lucitone 199® shade guides showed the lowest CEs. All guides had coverage errors above 5.89 ∆E, which is larger than ∆E thresholds of acceptability. Of the materials evaluated in this study, GC Acrylic and Lucitione 199® are best able to reproduce the clinical appearance of the gingival tissue. Many patients have tissue that cannot be reproduced accurately with currently available materials.

Association between cognitive health and masticatory conditions: a descriptive study of the national database of the universal healthcare system in Japan.

Cognitive health is subject to decline with increasing numbers of lost teeth which impacts mastication. This study is a descriptive data analysis of the association between masticatory and cognitive conditions using a large database. We obtained the dental and medical records from Japan's universal healthcare system (UHCS) from the national database in 2017. The data from 94% of the Japanese population aged 65 and over is included. It is inclusive of diagnostic codes for various types of cognitive impairment, as well as dental treatment records from 2012 to 2017. The cognitive impairment group was compared to those without a diagnosis of cognitive impairment. Crude odds ratio between loss of mastication with natural teeth (exposure) and cognitive impairments (outcome) were compared. Patients who have lost masticatory function are likely to have cognitive impairment with an odds ratio of 1.89 (p<0.0001) for early elderly (aged 65-75) and 1.33 (p<0.0001) for advanced elderly (over 75). Patients who are edentulous and function with complete dentures are likely to have cognitive impairment with an odds ratio of 2.38 (p<0.0001) and 1.38 (p<0.0001), respectively. The data shows a convincing and significant result of an association between cognitive health and oral health, related to masticatory conditions.

Effect of Magnet Position on Tipping and Bodily Tooth Movement in Magnetic Force-Driven Orthodontics.

The goal of our study is to launch magnetic force-driven orthodontics. This continuous study investigated the influence of magnet position on tipping and bodily tooth movement, using 3D printing technology and digital analysis. Orthodontic typodont models (TMs) for space-closure were 3D printed to mimic maxillary central incisors. Nd-Fe-B magnets were placed in the middle third (Model-M), and the cervical third (Model-C), of the tooth. TMs, before and after movement, were digitally scanned and superimposed. The 3D digital coordinates (X, Y, and Z axes), and rotations (yaw, pitch, and roll) of the tooth crown and root, were calculated and compared between the two magnet position settings. Model-M showed higher rates of movement, but more rotation than Model-C (p < 0.01). The root apex of Model-M moved in the opposite direction of the crown (R = -0.29), indicating tipping movement. In contrast, the crown and root apex moved in the same direction (R = 0.56) in Model-C, indicating bodily movement. These patterns were confirmed in a typodont model of a moderate crowding case. The results validated that modifying the magnet position increased the amount of bodily tooth movement, and decreased rotation/tipping in an ex vivo setting.

Comparison of Peri-implant Soft Tissue Color with the Use of Pink-Neck vs Gray Implants and Abutments Based on Soft Tissue Thickness: A 6-Month Follow-up Study.

PURPOSE: To compare the optical effects of an immediately placed anodized pink-neck implant and abutment vs a conventional gray implant and abutment in relation to soft tissue thickness 6 months after the restoration was completed. MATERIALS AND METHODS: Forty patients with a hopeless maxillary anterior tooth received an immediate implant and an immediate provisional or custom healing abutment after flapless extraction. Participants were randomized to receive either a conventional titanium implant (control) or a pink-neck implant (test). All patients then received two identical CAD/CAM titanium abutments (one conventional gray, delivered first, and one anodized to appear pink, delivered 3 weeks after) and a zirconia crown. A spectrophotometer was used to record the color of the peri-implant mucosa and gingiva 3 weeks after delivery of each abutment and 6 months after the final restoration was delivered. The color difference between the two sites was calculated (ΔL*, Δa*, Δb*), and correlations with soft tissue thickness, change in ridge dimension, and implant position were assessed. RESULTS: Irrespective of the randomization group, changing the abutments from gray to pink showed a change in color between the peri-implant mucosa and the natural gingiva. Patients with a thin gingival biotype showed a statistically significant color change (P = .00089) in the a* axis, meaning that the gingiva appeared more pink (Δa*). No significant correlation between the soft tissue color and buccolingual collapse, vertical recession, or implant position was observed in either group. CONCLUSION: The difference in color observed between the peri-implant mucosa and the gingiva was considerable in all groups. Anodized pink implants and abutments could reduce the difference in the red aspect (Δa*) of the peri-implant mucosa compared to the adjacent gingiva in patients with a thin biotype.

3D digital analysis of magnetic force-driven orthodontic tooth movement.

With the introduction of rare earth magnets like neodymium-iron-boron (NdFeB), it has become possible to produce small magnets with high forces, necessary for its usage in the field of dentistry, such as for orthodontic tooth movement. The ultimate goal of this project is to establish magnetic force-driven orthodontic treatment as a future treatment modality for comprehensive orthodontic treatment. In order to utilize magnets for orthodontic treatment, we must first understand the characteristics of tooth movement created by magnetic forces. In this study, we aimed to digitally assess the efficacy of magnetic attraction and repulsion forces by means of a 3D digital analysis of movement (distance, direction, angulation and duration) and rotation (yaw, pitch and roll) of the crown and root of teeth in an ex vivo typodont model. We performed space closure and space gain treatment of maxillary central incisors (n = 30) and analyzed the movement and rotation of the teeth and root apex with 3D digital analysis. The results of the typodont model indicated significant differences on amount, speed and rotation of tooth and root movement created by magnetic attraction and repulsion forces. We also mimicked a moderate crowding typodont case and successfully treated it with a combination of attraction and repulsion magnetic forces. The moderate crowding case utilized magnets and a titanium archwire to guide the planned tooth movements and prevent undesired or unexpected movement. Further ex vivo experiments and considerations for biosafety will be necessary to investigate magnet force-driven orthodontics as a future modality of orthodontic treatment.

Cephalometric Measurements Of Non-Syndromic Oligodontia In Early Dental Age In A Japanese Population.

PURPOSE: Oligodontia significantly affects oral function and esthetics. Recognition of skeletal and dental patterns may aid in proper diagnosis and development of appropriate interventions. The aim of this study was to analyze skeletal and dental patterns for pre-adolescent patients with a diagnosis of oligodontia. PATIENTS AND METHODS: This study included 19 oligodontia patients (age: 9.5±1.3, Hellman's developmental stage IIIA~IIIB) along with a control group that comprised of 19 participants (age: 9.9±1.6) without any skeletal disharmony or congenitally missing teeth, with an Angle class I relationship and general crowding. Average cephalometric measurements among the oligodontia group were compared to the control group. The correlation between number of congenitally missing teeth (CMT) and each measurement was investigated. Skeletal measurements for both male and female patients in the oligodontia group and the control group were also compared. RESULTS: No significant difference between the experimental and the control group was observed with respect to skeletal angular and linear measurements, except the gonial angle. Differences in dental pattern measurements were observed. The oligodontia group had significantly smaller Mo-Ms and Is-Mo than the control group (p<0.01). No correlation was detected between severity of oligodontia (number of CMT) and skeletal measurement except for SNB (R=-0.4). For females with oligodontia, Mo-Ms (eruption of maxillary first molar) and Is-Mo (mesial location of maxillary first molar) significantly differed from females in the control group (p<0.01). In contrast, no differences in Mo-Ms or Is-Mo were detected for male patients when oligodontia and control group were compared. CONCLUSION: Among pre-adolescent Japanese patients with oligodontia in Hellman's developmental age IIIA~IIIB, no significant differences in skeletal characteristics were established when compared to the control group. However, tooth position of maxillary first molars indicated smaller vertical descent and mesial shift, which may suggest weak maxillary vertical development.

Changes of the alveolar ridge dimension and gingival recession associated with implant position and tissue phenotype with immediate implant placement: A randomised controlled clinical trial.

PURPOSE: This prospective, randomised, controlled clinical trial evaluated the relationship between alveolar ridge dimensional change and recession with the implant position (horizontal and vertical) and tissue phenotype in immediately placed and provisionalised implants without the use of bone grafting. MATERIALS AND METHODS: Patients (n = 40) with a hopeless maxillary anterior tooth received an immediate implant and immediate provisional or customised healing abutment after flapless extraction. Implants were finally restored 3 months after placement and followed up for 6 months after delivery of the restoration. The alveolar ridge dimensional change and recession were measured using cone beam computed tomography (CBCT) scans and digitalised dental casts. Alveolar contour changes were correlated to implant position and tissue phenotype. RESULTS: The tissue phenotype showed no significant correlation to the alveolar ridge dimensional change. At 6 months, the average alveolar ridge dimensional change was approximately 0.7 mm in the buccolingual dimension independent of tissue phenotype. A statistically significant difference was observed on the recession values comparing tissue phenotypes, with more recession observed in the thin phenotype (1.96 mm) than in the thick phenotype (1.18 mm). A significant correlation was observed between horizontal implant position and buccolingual alveolar ridge change. A positive correlation was observed between the horizontal implant position and the dimensional change measured in the casts at the level of the free gingival margin. A statistically significant negative correlation was observed between the horizontal implant position and the resorption measured by the CBCT scans. CONCLUSIONS: Patients with thin tissue phenotype had a more marked recession. The horizontal implant position showed a relationship to the alveolar ridge dimensional changes observed. The greater the buccal gap distance between the implant and the buccal plate, the lesser the radiographic changes observed in the alveolar bone, however, the greater the changes observed in the buccal aspect of the casts at the level of the free gingival margin.

Comparison of the Color Appearance of Peri-implant Soft Tissue with Natural Gingiva Using Anodized Pink-Neck Implants and Pink Abutments: A Prospective Clinical Trial.

PURPOSE: The aim of this study was to assess the visual effects of pink-neck implants and pink abutments with respect to the color of natural gingiva. The distribution pattern and magnitude of CIELAB color difference coordinates were studied. MATERIALS AND METHODS: Forty subjects with a tooth in the maxillary esthetic zone deemed hopeless were recruited. Patients were randomized to either a conventional gray implant or a pink-neck implant. The hopeless tooth was removed and patients received an immediate implant along with an immediate customized provisional prosthesis. The provisional was maintained for 3 months to allow for complete healing of the implants. Two identical CAD/CAM titanium abutments only differing in color (gray and pink) were fabricated along with an all-ceramic zirconia crown. The gray abutment was delivered first with a zirconia crown, and it was replaced with the pink abutment 3 weeks later. Three weeks after insertion of each abutment with the zirconia crown, a spectrophotometer was used to collect the color of the peri-implant mucosa and natural gingiva, so the difference between the two sites could be calculated (ΔL* [difference in lightness], Δa* [difference in green-red axis], Δb* [difference in blue-yellow axis]). The natural gingiva measured was the gingiva of a contralateral or adjacent unrestored tooth. The effect of implant color and abutment on the color difference between peri-implant mucosa and natural gingiva was investigated with a linear regression model using a generalized estimating equation (GEE) approach. RESULTS: Raw data demonstrated statistically insignificant smaller ΔL*, Δa*, Δb* between peri-implant soft tissue and natural gingiva when the implant was pink versus gray. Further, there were statistically insignificant smaller ΔL* and Δb* between peri-implant soft tissue and natural gingiva when the abutment was pink versus gray. Δa* between peri-implant soft tissue and natural gingiva was significantly smaller when using a pink abutment regardless of the implant type (P < .05). CONCLUSION: Using an anodized pink abutment and/or a pink-neck implant minimizes the color difference observed between the peri-implant mucosa and the natural gingiva in the redness spectrum. These advances in technology assist in helping the peri-implant mucosa appear more natural by minimizing the color variance.

Establishment of perpendicular protrusion of type I collagen on TiO2 nanotube surface as a priming site of peri-implant connective fibers.

Natural teeth are supported by connective tissue collagen fibers that insert perpendicularly in the tooth cementum. Perpendicular insertion plays an important role in the maintenance of the junction between the oral epithelium and the periodontal connective tissue. Most titanium dental implant surfaces have no micro or macro structure to support perpendicularly oriented collagen attachment. Without this tight biologic seal to resist bacterial invasion and epithelial downgrowth, progressive bone loss in peri-implantitis is seen around dental implants. The purpose of this study was to establish the perpendicularly oriented collagen attachment to titanium oxide nanotube (TNT), and to assess its binding stability. TNT was prepared on the titanium-surface by anodization. Scanning electron microscopy (SEM) showed a regularly aligned TNT with an average 67 nm-diameter when anodized at 30 V for 3 h. Subsequently, collagen type I (CoI) was electrophoretically fused to anodic TNT in native polyacrylamide gel system where negatively charged CoI-C term was perpendicularly navigated to TNT. SEM and atomic force microscopy (AFM) were used to analyze CoI on the TiO2 and TNT surface. Several tens of nanometers of CoI protrusion were recorded by AFM. These protrusions may be long enough to be priming sites for cell-secreted CoI. CoI laid parallel to the titanium surface when fused by a chemical linker. Binding resistance of CoI against drastic ultrasonication was measured by Fourier-transform infrared spectroscopy attenuated total reflection (FTIR-ATR). The electrophoretically fused CoI in the titanium nanotube (TNT-CoIEPF) showed the significantly greatest binding resistance than the other groups (P < 0.01, a 1-way ANOVA and Tukey HSD post hoc test). Furthermore, TNT-CoIEPF surface rejected epithelial cell stretching and epithelial sheet formation. Chemically linked horizontal CoI on titanium oxide (TiO2) facilitated epithelial cell stretching and sheet formation.

Retrograde transport of masseter muscle-derived neprilysin to hippocampus.

Although the effects of neprilysin (NEP), also called CD10, on the clearance of Alzheimer's disease (AD)-associated amyloid-ß (Aß) have been reported, NEP is not made in the brain, and the mechanism for the transport of NEP to the brain has not been investigated. Our hypothesis is that muscle packages NEP in exosomes in response to a neuromuscular signal and sends it to the brain via retrograde axonal transport. The masseter muscle (MM) and the trigeminal nerve (TGN) are good candidates for this mechanism by virtue of their proximity to the brain. The aim of this study was to trace the NEP protein from the MM, through the TGN, and to the hippocampus (HPC) in muscle contraction models in vitro and in vivo. NEP expression in mouse tissue lysates was analyzed by RT-PCR and Western blot. Four-week-old mice were perfused to remove blood NEP contamination. The MM expressed substantial levels of NEP protein and mRNA. On the other hand, a remarkably high level of NEP protein was measured in the TGN in the absence of mRNA. NEP protein, without the corresponding mRNA, was also detected in the HPC. These results suggested that the MM derived NEP was taken up by the TGN, which in turn permitted NEP access to the central nervous system and within it the HPC. When the MM was induced to contract by electric stimulation in freshly euthanized mice, NEP protein decreased in the MM in a stimulus time-dependent manner, while that in the TGN and the HPC increased sequentially. Furthermore, NIR-labeled exosomes tracked along the same route. Finally, carbachol induced secretion of exosomal NEP in C2C12-derived myotube cells. These results support our hypothesis that MM-derived NEP is transported along the TGN to reach the HPC following electrical or cholinergic stimulation.

Knowledge and Practice of Oral Cancer Screening in Teaching Faculty-Comparison of Specialty and Year of Clinical Experience.

The purpose of this study was to assess the knowledge, practice, confidence, and perceived barriers to oral cancer screening among teaching faculty in Japan. Results were compared by specialist as well as years of clinical experience. A 25-question survey was used to assess the oral cancer screening practices of faculty dentists at Iwate Medical University, School of Dental Medicine, the only dental school located in the northeast (Tohoku) region of Japan. The study was approved by the Institutional Review Board of Iwate Medical University. The response rate was 83% (n = 110, 71.8% were male). This survey revealed that only 43.6% of the dentists performed oral cancer screening frequently (always or usually) at the initial appointment, and there was no significant differences between specialists and clinical experience. Visual inspection of the oral cavity was the primary screening method, but the frequency and content of the examination (TMJ and tonsil) was significantly different between specialties. A history of cancer and tobacco use motivated providers to perform an examination and was significantly different between various specialists and clinically experienced providers. In contrast, HPV and alcohol consumption were a weak motivator. The confidence level of providers on their examination knowledge/skills was poor, especially among junior faculty. More than 80% of junior faculty indicated a lack of knowledge/skills as a major barrier.