RESUMEN
Dental caries is a commonly occurring non-communicable disease throughout the world that might compromise the quality of any individual's life. Glass ionomer cements (GIC) are the most acceptable restorative materials due to their ease of manipulation, minimal tooth loss and least invasive strategy; however, they lack mechanical stability that has become a point of concern. Nanoparticles (NPs) are an outstanding option for modifying and enhancing the properties of dental materials. The focus of this study was to prepare novel, biocompatible titania dioxide (TiO2) NPs as a dental-restorative material using an efficient probiotic Bacillus coagulans. The prepared NPs were incorporated into glass ionomer restorative material at varying concentrations and investigated for cell viability percentage, microhardness and surface morphology. Results indicated that pure 100% anatase phase TiO2 NPs with particle size of 21.84 nm arranged in smooth, spherical agglomerates and clusters forms. These NPs depicted cell viability > 90%, thus confirming their non-cytotoxic behavior. GIC restorative materials reinforced by 5% titania (TiO2) NPs demonstrated the highest microhardness in comparison to the control group and other experimental groups of the study. Surface morphology analysis revealed a reduction in cracks in this novel dental-restorative material supporting its compatible biological nature with better hardness strength and negligible crack propagation. Overall, these results indicated that TiO2 NPs produced using a biological approach could be easily used as restorative materials in dental applications.
RESUMEN
A lab-scale gravity-driven bioreactor (GDB) was designed and constructed to evaluate the simultaneous treatment of black liquor and domestic wastewater. The GDB was operated with a mixture of black liquor and domestic wastewater at a ratio of 1:1 and maintained at an average organic loading rate of 1235 mg-COD/L-Day. The wastewater was fed to the primary sedimentation tank at a flow rate of approximately 12 mL/min and subsequently passed through serially connected anaerobic and aerobic chambers with the same flow rate. Each wastewater sample was allowed to undergo a hydraulic retention time of approximately 72 h, ensuring effective treatment. The GDB was actively operated for nine samples (W1-W9) at a weekly frequency. The entire process was conducted within the workstation's ambient temperature range of 30-35 °C to sustain microbial activity and treatment efficiency in an open environment. The performance of the GDB was evaluated in terms of various pollution indicators, including COD, BOD5, lignin removal, TDS, TSS, EC, PO43-, SO42-, microbial load (CFU/mL and MPN index), total nitrogen, and color reduction. The results showed that the GDB achieved promising treatment efficiencies: 84.5% for COD, 71.80% for BOD5, 82.8% for TDS, 100% for TSS, 74.71% for E.C., 67.25% for PO43-, 81% for SO42-, and 69.36% for TN. Additionally, about 80% reduction in lignin content and 57% color reduction were observed after the treatment. The GDB substantially reduced microbial load in CFU/mL (77.98%) and MPN (90%). This study marks the first to report on wastewater treatment from two different sources (black liquor and domestic wastewater) using a simple GDB design. Furthermore, it highlights the GDB's potential as a cost-effective, environmentally friendly, and efficient solution for wastewater treatment, with no need for supplementary chemical or physical agents and zero operational costs.
Asunto(s)
Aguas Residuales , Purificación del Agua , Eliminación de Residuos Líquidos/métodos , Lignina , Reactores BiológicosRESUMEN
Objective: To evaluate antagonistic role of titanium oxide nanoparticles against selected dental caries promoting bacteria. Methods: This in vitro-experimental study was conducted at Pakistan Institute of Engineering and Applied Sciences (PIEAS), National Institute of Health (NIH) and School of Dentistry (SOD), Islamabad for the period of one year from February 2022 to January 2023. Modified hydrothermal heating method was used to prepare titanium oxide nanoparticles (TiO2Nps). Size, shape, phase, band gap energy, surface and elemental composition of Nps were deciphered by application of various modern techniques including x-ray diffraction spectroscopy (XRD), scanning electron microscopy (SEM), dynamic light scattering (DLS), UV-Vis diffuse reflectance spectroscopy (DRS), atomic force microscopy (AFM), energy dispersive x-ray spectroscopy (EDX). Antimicrobial action of nanoparticles was evaluated against representatives of gram-positive (mono-derm) and Gram negative bacteria (di-derm) responsible for promoting dental caries. The zones of inhibition were calculated by disc diffusion method for each bacterial strain. Results: Characterization revealed that TiO2Nps were having an average size of 54nm, showing anatase-rutile phase having spherical, with very few- irregularly shaped particles. TiO2Nps contained only pure titanium and oxygen in the EDX image but organic compounds in FTIR scan. Results of antimicrobial action indicated their potent bactericidal action against Pseudomonas aeruginosa (20mm), Escherichia coli (19mm) and Lactobacillus acidophilus (19nm) while comparatively less activity against Staphylococcus aureus (16mm).. Conclusion: TiO2Nps fabricated by modified protocol displayed an effective antimicrobial activity and can be used as an alternative to the contemporary chemotherapeutics against selected bacterial pathogens to prevent dental caries.
RESUMEN
Bacillus species and their metabolites have potential alternative uses as chemical pesticides that can limit the growth of potential plant pathogens and enhance crop productivity. The aim of this study was to investigate the potential of Bacillus subtilis FJ3 for promoting plant growth and controlling fungal plant pathogens. The study evaluated the ability of the strain to promote plant growth in vitro by characterizing its growth-promoting traits, which included the production of hydrolytic enzymes, indole acetic acid, siderophores, biofilm formation, and phosphate solubilization. Polymerase Chain Reaction (PCR) testing revealed that strain FJ3 has the potential to produce lipopeptides such as fengycin, surfactin, mycosubtilin, and pilpastatin. Through in vitro antagonism testing it was demonstrated that strain FJ3 is able to inhibit Fusarium oxysporum by 52% compared to the untreated control and was antagonistic against Aspergillus flavus, Aspergillus niger, and Rhizopus oryzae using a dual method. The minimum inhibitory concentration of Bacillus crude extract resulted in a 92%, 90%, 81.5%, and 56% growth inhibition of Fusarium oxysporum, A. niger, A. flavus, and Rhizopus oryzae, respectively. In FT-IR and GC-MS analysis of crude LPs extract, the transmission and mass spectrum confirmed the existence of aforesaid lipopeptides containing ß-fatty acids with chain lengths ranging from C14 to C21 in which the majority were saturated fatty acids. Greenhouse experimentation revealed that Bacillus strain FJ3 and its metabolites significantly diminished the disease incidence with an average reduction of 31.56%. In sterilized soil, FJ3 and its metabolites caused 24.01% and 10.46% growth promotion, respectively, in chickpea. The results demonstrated that Bacillus strain FJ3 has broad-spectrum antifungal and plant growth-promoting applications and could be a promising candidate for development into a commercialized biobased product for use in sustainable agriculture practice.
RESUMEN
The authors wish to make the following correction to this paper [...].
RESUMEN
[This corrects the article DOI: 10.3389/fmicb.2023.1126612.].
RESUMEN
The title compound, C30H34F2N6O2·2.5H2O, was obtained by condensation of 2-[2-(4-fluoro-phen-yl)hydrazono]-5,5-di-methyl-cyclo-hexan-1,3-dione with ethyl-enedi-amine in ethanol and crystallized as a 1:2.5 hydrate in space group C2/c. The two independent mol-ecules, with approximate crystallographic C 2 symmetries, have different conformations and packing environments, are stabilized by intra-molecular N-Hâ¯N hydrogen bonds and linked by O-Hâ¯O hydrogen bonds involving the water mol-ecules. A Hirshfeld surface analysis showed that Hâ¯H contacts make by far the largest (48-50%) contribution to the crystal packing. From DFT calculations, the LUMO-HOMO energy gap of the mol-ecule is 0.827â eV.
RESUMEN
Biodesulfurization is emerging as a valuable technology for the desulfurization of dibenzothiophene (DBT) and its alkylated substitutes, which are otherwise regarded as refractory to other physical and chemical desulfurizing techniques. The inability of the currently identified pure cultures and artificial microbial consortia due to lower desulfurization rate and product inhibition issues has compelled the researcher to look for an alternative solution. Thus, in the present study, an indigenously isolated microbial consortium was employed to tackle the desulfurization issue. Herein, we isolated several kinds of DBT desulfurizing natural microbial consortia from hydrocarbon-contaminated soil samples by conventional enrichment technique. The most effective desulfurizing microbial consortium was sequenced through illumine sequencing technique. Finally, the effect of the products of the desulfurizing pathway (such as 2-hydroxybiphenyl (2-HBP) and sulfate (SO4-2) was evaluated on the growth and desulfurization capability of the isolated consortium. The outcomes of Gibb's assay analysis showed that six isolates followed the "4S" pathway and converted DBT to 2-HBP. Among the isolates, I5 showed maximum growth rate (1.078 g/L dry cell weight) and desulfurization activity (about 77% as indicated by HPLC analysis) and was considered for further in-depth experimentation. The analysis of 16S rRNA by high-throughput sequencing approach of the I5 isolate revealed five types of bacterial phyla including Proteobacteria, Bacteroidetes, Firmicutes, Patescibacteria, and Actinobacteria (in order of abundance). The isolate showed significant tolerance to the inhibitory effect of both 2-HBP and SO4-2 and maintained growth in the presence of even about 1.0 mM initial concentration of both products. This clearly suggests that the isolate can be an efficient candidate for future in-depth desulfurization studies of coal and other fossil fuels.
Asunto(s)
Bacterias , Tiofenos , ARN Ribosómico 16S/genética , Tiofenos/metabolismo , Bacterias/genéticaRESUMEN
Introduction: Croatian superhigh-organic-sulfur Rasa coal had been mined for nearly 400 years. The release of hazardous trace elements (HTEs) and toxic organic pollutants (TOPs) into the local environment by coal mining, preparation, and combustion activities has resulted in pollution. Methods: In this study, the diversity and composition of microbial communities in estuarine sediment and soil samples as well as community function responses to the pollutants were investigated. Results: The results showed that PAH degradation does occur following 60 years of natural attenuation, the location is still heavily polluted by polycyclic aromatic hydrocarbons (PAHs) and HTEs. Microbial analyses have shown that high concentrations of PAHs have reduced the diversity and abundance of microbial communities. The pollution exerted an adverse, long-term impact on the microbial community structure and function in the brackish aquatic ecosystem. Microorganisms associated with the degradation of PAHs and sulfur-containing compounds have been enriched although the diversity and abundance of the microbial community have reduced. Fungi which are believed to be the main PAH degrader may play an important role initially, but the activity remains lower thereafter. It is the high concentrations of coal-derived PAHs, rather than HTEs, that have reduced the diversity and abundance of microbial communities and shaped the structure of the local microbiota. Discussion: This study could provide a basis for the monitoring and restoration of ecosystems impacted by coal mining activities considering the expected decommission of a large number of coal plants on a global scale in the coming years due to growing global climate change concerns.
RESUMEN
Nanotechnology has acquired significance in dental applications, but its safety regarding human health is still questionable due to the chemicals utilized during various synthesis procedures. Titanium nanoparticles were produced by three novel routes, including Bacillus subtilis, Cassia fistula and hydrothermal heating, and then characterized for shape, phase state, size, surface roughness, elemental composition, texture and morphology by SEM, TEM, XRD, AFM, DRS, DLS and FTIR. These novel titanium nanoparticles were tested for cytotoxicity through the MTT assay. L929 mouse fibroblast cells were used to test the cytotoxicity of the prepared titanium nanoparticles. Cell suspension of 10% DMEM with 1 × 104 cells was seeded in a 96-well plate and incubated. Titanium nanoparticles were used in a 1 mg/mL concentration. Control (water) and titanium nanoparticles stock solutions were prepared with 28 microliters of MTT dye and poured into each well, incubated at 37 °C for 2 h. Readings were recorded on day 1, day 15, day 31, day 41 and day 51. The results concluded that titanium nanoparticles produced by Bacillus subtilis remained non-cytotoxic because cell viability was >90%. Titanium nanoparticles produced by Cassia fistula revealed mild cytotoxicity on day 1, day 15 and day 31 because cell viability was 60−90%, while moderate cytotoxicity was found at day 41 and day 51, as cell viability was 30−60%. Titanium nanoparticles produced by hydrothermal heating depicted mild cytotoxicity on day 1 and day 15; moderate cytotoxicity on day 31; and severe cytotoxicity on day 41 and day 51 because cell viability was less than 30% (p < 0.001). The current study concluded that novel titanium nanoparticles prepared by Bacillus subtilis were the safest, more sustainable and most biocompatible for future restorative nano-dentistry purposes.
Asunto(s)
Nanopartículas , Titanio , Ratones , Animales , Humanos , Titanio/farmacología , Titanio/química , Nanopartículas/química , Línea Celular , Fibroblastos , AguaRESUMEN
Currently, titanium oxide (TiO2) nanoparticles are successfully employed in human food, drugs, cosmetics, advanced medicine, and dentistry because of their non-cytotoxic, non-allergic, and bio-compatible nature when used in direct close contact with the human body. These NPs are the most versatile oxides as a result of their acceptable chemical stability, lower cost, strong oxidation properties, high refractive index, and enhanced aesthetics. These NPs are fabricated by conventional (physical and chemical) methods and the latest biological methods (biological, green, and biological derivatives), with their advantages and disadvantages in this epoch. The significance of TiO2 NPs as a medical material includes drug delivery release, cancer therapy, orthopedic implants, biosensors, instruments, and devices, whereas their significance as a dental biomaterial involves dentifrices, oral antibacterial disinfectants, whitening agents, and adhesives. In addition, TiO2 NPs play an important role in orthodontics (wires and brackets), endodontics (sealers and obturating materials), maxillofacial surgeries (implants and bone plates), prosthodontics (veneers, crowns, bridges, and acrylic resin dentures), and restorative dentistry (GIC and composites).
RESUMEN
In present research, a potent fungal strain was isolated from paper mill effluent (black liquor) in order to investigate its potential for the biodegradation of lignin. Two step strategy was used to screen most efficient fungal strain having ability to growin MSM-black liquor medium and to degrade alkali lignin.The results of initial screening indicated that the strain M-2 produced comparatively higher ligninolytic zone on MSN agar plates supplemented with black liquor (BL) and alkali ligninase compared to the other isolates.The results of 18S rRNA gene sequencing revealed that strain M-2 showed ≥ 99% sequence homology with Dipodasceus australiansis.The process for the biodegradation of lignin was optimized using Taguchi Orthogonal Array design. Under optimized conditions of pH 9, 40 °C and 4% inoculum, a maximum of 89% lignin was degraded with 41% color reduction after 8 days of incubation period by Dipodasceus australiansis M-2. The pH and temperature were found to be significant terms with the p-values of 0.002 and 0.001 respectively. The laccase activity of the Dipodascus australiensis was found to be maximum of 1.511 U/mL. The HPLC analysis of lignin biodegradation indicated sharp transformation of peaks as compared to the control. Our results suggested that the strain Dipodascus australiensis M-2 possess excellent lignin degradation and color reduction capability and can be applied in waste treatment systems for pulp and paper mill effluent. In present work we are reporting first hand information regarding biodegradation of lignin by a potent strain of Dipodascus australiensis and statistical optimization of the bioprocess.
Asunto(s)
Residuos Industriales , Lignina , Agar , Álcalis , Biodegradación Ambiental , Dipodascus , Residuos Industriales/análisis , Lacasa/metabolismo , Lignina/metabolismo , PapelRESUMEN
Excessive emission of sulfur dioxides from the combustion of coal and other fossil fuels for thermal and industrial purposes has been associated with serious environmental hazards. Biodesulfisation (BDS) can be an effective approach for reducing the impact of toxic gases to its inbuilt operational feasibility under ambient environmental conditions. In the present research, two strategies for BDS of a standard organosulfur compound such as dibenzothiophene (DBT) were investigated under laboratory conditions. In the first treatment, the role of different surfactants such as Tween-20, Tween-80, SDS, and EDTA on the desulfurization of DBT was investigated by the application of bacterial consortium IQMJ-5. In the second treatment, Iron oxidenanoparticles were synthesized and immobilized on the surface of bacteria cells. Shake flask experiments were conducted with immobilized cells, surfactant amended immobilized cells, and control or noncoated cells. Among different surfactant treatments, Tween-80 was found to be the most effective surfactant, showing maximum desulfurization activity at a concentration of 5 g/L. The transmission electron microscopy and X-ray diffraction analysis indicated that produced nanoparticles were spherical in shape with a size of about 46 nm and had a stoichiometric ratio of 55.85% and 44.15% between O and Fe, respectively. The nanoparticle treatment enhanced the DBT desulfurization process up to 11.37% as compared to the control, specifically when immobilized cells were used. Therefore, it was concluded that nanoparticles treatments with immobilization of the bacterial cells enhanced the desulfurization rate of DBT under ambient reaction conditions and provide a sustainable alternative for commercial coal BDS.
Asunto(s)
Nanopartículas , Tensoactivos , Polisorbatos , Carbón Mineral , Fenómenos MagnéticosRESUMEN
The kidney is an unconventional site for thyroid metastasis. As of the writing of this article, only about 30 cases have been reported. It presents like a renal mass. We are reporting a man with thyroid carcinoma presenting with distant metastasis to the kidney. He had complaints of abdominal pain and haematuria. Initial imaging suggested a left renal mass. A diagnosis of renal cell carcinoma was made and a nephrectomy was performed. Histopathology revealed it to be a metastasis from cancer of the thyroid gland. Subsequently, an ultrasound of the thyroid gland was performed, which showed a malignant appearing thyroid nodule. Correlative bone scan showed uptake at multiple skeletal sites. Total thyroidectomy was done and it was found to be papillary thyroid cancer. Subsequently, high dose radioactive iodine was administered. The patient was followed up and has recently found to have metastasis to the brain and is undergoing radiotherapy.
RESUMEN
This review discusses the classification, characteristics, and applications of biosurfactants. The biosynthesis pathways for different classes of biosurfactants are reviewed. An in-depth analysis of reported research is carried out emphasizing the synthetic pathways, culture media compositions, and influencing factors on production yield of biosurfactants. The environmental, pharmaceutical, industrial, and other applications of biosurfactants are discussed in detail. A special attention is given to the biosurfactants application in combating the pandemic COVID-19. It is found that biosurfactant production from waste materials can play a significant role in enhancing circular bioeconomy and environmental sustainability. This review also details the life cycle assessment methodologies for the production and applications of biosurfactants. Finally, the current status and limitations of biosurfactant research are discussed and the potential areas are highlighted for future research and development. This review will be helpful in selecting the best available technology for biosynthesis and application of particular biosurfactant under specific conditions.
Asunto(s)
COVID-19 , Tensoactivos , Humanos , Tensoactivos/metabolismoRESUMEN
The prevalence of dental caries has been largely consonant over time despite the enhancement in dental technologies. This study aims to produce novel GIC restorative material by incorporating TiO2 nanoparticles synthesized by Bacillus subtilis for the treatment of dental caries. The TiO2 nanoparticles were prepared by inoculating a fresh culture of Bacillus subtilis into a nutrient broth for 24 h, which was then characterized by XRD, DRS, FTIR, AFM, SEM, TEM and EDX. These TiO2 nanoparticles were incorporated in GIC restorative material at different concentrations (0-10% TiO2 -GIC) and were tested for their mechanical properties in a universal testing machine. The XRD analysis revealed synthesis of anatase and rutile-phased TiO2 nanoparticles with a particle size of 70.17 nm that was further confirmed by SEM and TEM analysis. The EDX spectrum indicated prominent peaks of titanium and oxygen with no impurities in the prepared material. Treatment with 5% TiO2 -GIC proved to be most effective for the treatment of dental caries with no observable cytotoxic effect. An increase in the compressive strength of TiO2 nanoparticle-reinforced GIC was observed as the concentration of the TiO2 nanoparticles was increased up to 5%; subsequently, the compressive strength was lowered. An increase in the flexural strength was observed in GIC containing 0%, 3% and 5% TiO2 nanoparticles sequentially. Based on the results, it can be concluded that Bacillus subtilis-derived TiO2 nanoparticles have excellent potential for developing next generation of restorative materials for dental issues.
RESUMEN
Due to human activity, climatic changes and habitat damage, the Chukar partridge (Alectoris chukar) is experiencing a population decrease. The goal of this work was to isolate and identify the inner eggshell microflora in order to learn more about their function in A. chukar embryo mortality and hatchability in semi-captive settings. During the egg-laying season, 204 eggs were gathered from the Balkasar Research Complex in Chakwal, Pakistan. These eggshells were divided into four categories after incubation: un-pricked with dead embryo, pricked with dead embryo, hatched, and unfertilized eggs. A total of 47 (23.03%) samples tested positive for gram-positive bacteria, which were then identified using 16S rRNA sequence analysis. Bacillus subtilis, Bacillus cereus, Bacillus amyloliquefaciens, Bacillus toyonensis, Bacillus thuringiensis and Staphylococcus sciuri were among the identified species. Hatched eggshells had the highest percentage of bacterial flora (36.17%), followed by un-pricked with dead embryo (23.40%) and pricked with death embryo (21.27%), and unfertilized eggshells had the lowest percentage (19.14%). As a result, the findings of this study revealed that microbial contamination of eggshells could be a cause of early embryonic stage degeneration and bird death.
Asunto(s)
Cáscara de Huevo , Galliformes , Animales , Galliformes/genética , Pakistán , ARN Ribosómico 16S/genéticaRESUMEN
Microalgae biomass is considered an important feedstock for biofuels and other bioactive compounds due to its faster growth rate, high biomass production and high biomolecules accumulation over first and second-generation feedstock. This research aimed to maximize the specific growth rate of fresh water green microalgae Closteriopsis acicularis, a member of family Chlorellaceae under the effect of pH and phosphate concentration to attain enhanced biomass productivity. This study investigates the individual and cumulative effect of phosphate concentration and pH on specific growth characteristics of Closteriopsis acicularis in autotrophic mode of cultivation for bioethanol production. Central-Composite Design (CCD) strategy and Response Surface Methodology (RSM) was used for the optimization of microalga growth and ethanol production under laboratory conditions. The results showed that high specific growth rate and biomass productivity of 0.342 day-1 and 0.497 g L-1 day-1 respectively, were achieved at high concentration of phosphate (0.115 g L-1) and pH (9) at 21st day of cultivation. The elemental composition of optimized biomass has shown enhanced elemental accumulation of certain macro (C, O, P) and micronutrients (Na, Mg, Al, K, Ca and Fe) except for nitrogen and sulfur. The Fourier transform infrared spectroscopic analysis has revealed spectral peaks and high absorbance in spectral range of carbohydrates, lipids and proteins, in optimized biomass. The carbohydrates content of optimized biomass was observed as 58%, with 29.3 g L-1 of fermentable sugars after acid catalyzed saccharification. The bioethanol yield was estimated as 51 % g ethanol/g glucose with maximum of 14.9 g/L of bioethanol production. In conclusion, it can be inferred that high specific growth rate and biomass productivity can be achieved by varying levels of phosphate concentration and pH during cultivation of Closteriopsis acicularis for improved yield of microbial growth, biomass and bioethanol production.
RESUMEN
This study investigates the potential of crude oil degrading capabilities of biosurfactant-producing strains of Pseudomonas aeruginosa MF069166 and Meyerozyma sp. MF138126. P. aeruginosa produced mono-/di-rhamnolipids congeners whereas, Meyerozyma sp. produced acidic and lactonic forms of sophorolipids with crude oil. The values of critical micelle concentrations of rhamnolipids and sophorolipids were 40 mg/L and 50 mg/L with reductions in surface tension of water to 29 mN/m and 33 mN/m. Dynamic light scattering revealed that the average diameter of micellar aggregates of rhamnolipids ranged between 300 and 350 nm and the average size of sophorolipids micelles was 309 nm and 380 nm. Biosurfactants from P. aeruginosa and Meyerozyma sp. exhibited emulsification activities of 87% and 84% in crude oil. Cell surface hydrophobicity of both strains was higher in the presence of hydrophobic contaminants. The biosurfactants showed stability under varying pH, NaCl concentrations and temperatures. Gravimetric and GC-MS analyses demonstrated that P. aeruginosa degraded 91% of the petroleum hydrocarbons while Meyerozyma sp. showed 87% biodegradation efficiency. P. aeruginosa and Meyerozyma sp. have also been found to degrade halogen-containing compounds and showed excellent crude oil degradation efficiency. It is concluded that both strains have high potential of applications in the bioremediation of hydrocarbons-contaminated sites.