RESUMEN
Human Papillomavirus serotype 16 (HPV16) capsid protein (L1) pentamers canonically assemble into T = 7 icosahedral capsids. Such virus-like particles are the basis of the HPV vaccine. We examined assembly of L1 pentamers in response to pH, mild oxidants, and ionic strength and found a mixture of closed, roughly spherical structures from â¼20 to â¼70 nm in diameter, indicating the presence of many kinetically accessible energy minima. Using bulk and single particle techniques we observed that the size distribution changes but does not reach homogeneity. Though heterogenous in size, particles showed uniform responses to low ionic strength dissociation, thermal unfolding, and susceptibility to protease digestion. These assays suggest maturation over time, but at different rates. Cysteine oxidation further stabilized particles at early, but not late, times without changing general characteristics including thermal stability and protease digestion. These data show complex assembly paths to species of different sizes, but with locally similar interactions.
RESUMEN
Virus-like particles (VLPs) have untapped potential for packaging and delivery of macromolecular cargo. To be a broadly useful platform, there needs to be a strategy for attaching macromolecules to the inside or the outside of the VLP with minimal modification of the platform or cargo. Here, we repurpose antiviral compounds that bind to hepatitis B virus (HBV) capsids to create a chemical tag to noncovalently attach cargo to the VLP. Our tag consists of a capsid assembly modulator, HAP13, connected to a linker terminating in maleimide. Our cargo is a green fluorescent protein (GFP) with a single addressable cysteine, a feature that can be engineered in many proteins. The HAP-GFP construct maintained HAP's intrinsic ability to bind HBV capsids and accelerate assembly. We investigated the capacity of HAP-GFP to coassemble with HBV capsid protein and bind to preassembled capsids. HAP-GFP binding was concentration-dependent, sensitive to capsid stability, and dependent on linker length. Long linkers had the greatest activity to bind capsids, while short linkers impeded assembly and damaged intact capsids. In coassembly reactions, >20 HAP-GFP molecules were presented on the outside and inside of the capsid, concentrating the cargo by more than 100-fold compared to bulk solution. We also tested an HAP-GFP with a cleavable linker so that external GFP molecules could be removed, resulting in exclusive internal packaging. These results demonstrate a generalizable strategy for attaching cargo to a VLP, supporting development of HBV as a modular VLP platform.
Asunto(s)
Cápside , Proteínas Fluorescentes Verdes , Virus de la Hepatitis B , Proteínas Fluorescentes Verdes/metabolismo , Proteínas Fluorescentes Verdes/química , Cápside/química , Cápside/metabolismo , Ensamble de Virus , Proteínas de la Cápside/química , Proteínas de la Cápside/metabolismo , Virión/metabolismo , Virión/química , Propiedades de SuperficieRESUMEN
Charge detection mass spectrometry (CD-MS) allows mass distributions to be measured for heterogeneous samples that cannot be analyzed by conventional MS. With CD-MS, the m/z and charge are measured for individual ions using a detection cylinder embedded in an electrostatic linear ion trap (ELIT). Imprecision in both the m/z and charge measurements contribute to the mass resolution. However, if the charge can be measured with a precision of <0.2 e the charge state can be assigned with a low error rate and the mass resolving power only depends on the m/z resolution. Prior to this work, the best resolving power demonstrated experimentally for CD-MS was 700. Here we demonstrate a resolving power of >14,600, 20-times higher than the previous best. Trajectory simulations were used to optimize the geometry and electrostatic potentials of the ELIT. We found conditions where the energy dependence of the oscillation frequency becomes parabolic, and then operated with a nominal ion energy at the minimum of the parabola. The 14,600 resolving power was obtained with a beam collimator before the ELIT. With the collimator removed, the resolving power of the optimized ELIT is 7300, which is still an order of magnitude higher than the previous best. The resolving power was demonstrated by resolving the isotope distributions for peptides and proteins. High resolution CD-MS measurements were then used to resolve the glycans on a monoclonal antibody and applied to the analysis of hepatitis B virus capsids. The results indicate that procedures for adduct removal need to be improved for the full benefit of the higher resolving power to be realized for higher mass species. However, these results represent a key step toward using CD-MS to analyze very complex protein mixtures where charge states are not well resolved in the m/z spectrum because of congestion from numerous overlapping peaks.
RESUMEN
Nanotechnology has provided novel modalities for the delivery of therapeutic and diagnostic agents. In particular, nanoparticles (NPs) can be engineered at a low cost for drug loading and delivery. For example, silica NPs have proven useful as a controlled release platform for anti-inflammatory drugs. Despite the wide-ranging potential applications for NPs, robust characterization across all size ranges remains elusive. Electron microscopy (EM) is the conventional tool for measuring NP diameters. However, imitations in throughput and the inability to provide comprehensive information on physical properties, such as mass and density, without underlying assumptions, hinder a complete analysis. In addition, assessing sample heterogeneity, aggregation, or coalescence in solution by traditional EM analysis is not possible. Resistive-pulse sensing (RPS) provides a high throughput, solution-phase method for characterizing particle heterogeneity based on volume. Complementing these methods, charge detection mass spectrometry (CD-MS), a single particle technique, provides accurate mass information for heterogeneous samples including NPs. By combining EM, RPS and CD-MS, accurate volume, mass, and densities were obtained for silica NPs of various sizes. The results show that the density for 20 nm silica NPs is close to the density of fused silica (2.2 g/cm3). Larger silica NPs were found to have densities that were either smaller or larger, while also falling outside the range of densities usually found for silica colloids and NPs (1.9-2.3 g/cm3). Lower densities are attributed to pores (i.e., porous particles). For one sample, the mass distribution showed two components attributed to two populations of particles in the sample with different densities. The synergistic combination of EM, RPS, and CD-MS measurements outlined here for NP samples, allows much more extensive information to be obtained than from any of the techniques alone.
RESUMEN
Nucleic acid nanoparticles (NANPs) are increasingly used in preclinical investigations as delivery vectors. Tools that can characterize assembly and assess quality will accelerate their development and clinical translation. Standard techniques used to characterize NANPs, like gel electrophoresis, lack the resolution for precise characterization. Here, we introduce the use of charge detection mass spectrometry (CD-MS) to characterize these materials. Using this technique, we determined the mass of NANPs varying in size, shape, and molecular mass, NANPs varying in production quality due to formulations lacking component oligonucleotides, and NANPs functionalized with protein and nucleic acid-based secondary molecules. Based on these demonstrations, CD-MS is a promising tool to precisely characterize NANPs, enabling more precise assessments of the manufacturing and processing of these materials.
Asunto(s)
Espectrometría de Masas , Nanopartículas , Ácidos Nucleicos , Nanopartículas/química , Ácidos Nucleicos/química , Ácidos Nucleicos/análisis , Tamaño de la Partícula , ADN/químicaRESUMEN
The main capsid protein (CP) of norovirus, the leading cause of gastroenteritis, is expected to self-assemble into virus-like particles with the same structure as the wild-type virus, a capsid with 180 CPs in a T = 3 icosahedron. Using charge detection mass spectrometry (CD-MS), we find that the norovirus GI.1 variant is structurally promiscuous, forming a wide variety of well-defined structures, some that are icosahedral capsids and others that are not. The structures that are present evolve with time and vary with solution conditions. The presence of icosahedral T = 3 and T = 4 capsids (240 CPs) under some conditions was confirmed by cryo-electron microscopy (cryo-EM). The cryo-EM studies also confirmed the presence of an unexpected prolate geometry based on an elongated T = 4 capsid with 300 CPs. In addition, CD-MS measurements indicate the presence of well-defined peaks with masses corresponding to 420, 480, 600, and 700 CPs. The peak corresponding to 420 CPs is probably due to an icosahedral T = 7 capsid, but this could not be confirmed by cryo-EM. It is possible that the T = 7 particles are too fragile to survive vitrification. There are no mass peaks associated with the T = 9 and T = 12 icosahedra with 540 and 720 CPs. The larger structures with 480, 600, and 700 CPs are not icosahedral; however, their measured charges suggest that they are hollow shells. The use of CD-MS to monitor virus-like particles assembly may have important applications in vaccine development and quality control.
Asunto(s)
Proteínas de la Cápside , Microscopía por Crioelectrón , Espectrometría de Masas , Norovirus , Norovirus/genética , Norovirus/aislamiento & purificación , Norovirus/química , Espectrometría de Masas/métodos , Proteínas de la Cápside/química , Proteínas de la Cápside/metabolismo , Cápside/química , Cápside/metabolismo , Virión/química , Ensamble de VirusRESUMEN
High-density lipoproteins (HDL) are micelle-like particles consisting of a core of triglycerides and cholesteryl esters surrounded by a shell of phospholipid, cholesterol, and apolipoproteins. HDL is considered "good" cholesterol, and its concentration in plasma is used clinically in assessing cardiovascular health. However, these particles vary in structure, composition, and therefore function, and thus can be resolved into subpopulations, some of which have specific cardioprotective properties. Mass measurements of HDL by charge detection mass spectrometry (CD-MS) previously revealed seven distinct subpopulations which could be delineated by mass and charge [Lutomski, C. A. et al. Anal. Chem. 2018]. Here, we investigate the thermal stabilities of these subpopulations; upon heating, the particles within each subpopulation undergo structural rearrangements with distinct transition temperatures. In addition, we find evidence for many new families of structures within each subpopulation; at least 15 subspecies of HDL are resolved. These subspecies vary in size, charge, and thermal stability. While this suggests that these new subspecies have unique molecular compositions, we cannot rule out the possibility that we have found evidence for new structural forms within the known subpopulations. The ability to resolve new subspecies of HDL particles may be important in understanding and delineating the role of unique particles in cardiovascular health and disease.
Asunto(s)
Lipoproteínas HDL , Humanos , Lipoproteínas HDL/química , Lipoproteínas HDL/sangre , Lipoproteínas HDL/metabolismo , Espectrometría de Masas/métodos , Temperatura de Transición , Tamaño de la Partícula , CalorRESUMEN
High purity plasmid DNA is a raw material for recombinant protein production as well as an active ingredient in DNA vaccines. There are four primary plasmid structures that can be observed in a typical plasmid formulation: supercoiled, relaxed (circular), linearized, and condensed. Determining what structures are present in a sample is important, as the structure can affect activity; the supercoiled structure has the highest activity, and >90% supercoiled is desired for industry standards. Recently, charge detection mass spectrometry (CD-MS) was used to distinguish two of the structures, supercoiled and condensed, by measuring the charge deposited on the ions by positive mode electrospray. Here, CD-MS is used to probe the structures of DNA plasmids during compaction with polycations, and through enzymatic treatment to relax and linearize plasmids. We find that all four structural types for plasmid DNA have unique charging profiles that can be distinguished using CD-MS. The extent of mechanical shearing of the DNA plasmids during electrospray is strongly influenced by the structural type.
Asunto(s)
ADN Superhelicoidal , Plásmidos , Plásmidos/química , ADN Superhelicoidal/química , ADN Superhelicoidal/análisis , Espectrometría de Masa por Ionización de Electrospray/métodos , Conformación de Ácido Nucleico , ADN/química , ADN/análisis , Poliaminas/química , Polielectrolitos/químicaRESUMEN
Protein capsids are a widespread form of compartmentalization in nature. Icosahedral symmetry is ubiquitous in capsids derived from spherical viruses, as this geometry maximizes the internal volume that can be enclosed within. Despite the strong preference for icosahedral symmetry, we show that simple point mutations in a virus-like capsid can drive the assembly of unique symmetry-reduced structures. Starting with the encapsulin from Myxococcus xanthus, a 180-mer bacterial capsid that adopts the well-studied viral HK97 fold, we use mass photometry and native charge detection mass spectrometry to identify a triple histidine point mutant that forms smaller dimorphic assemblies. Using cryoelectron microscopy, we determine the structures of a precedented 60-mer icosahedral assembly and an unexpected 36-mer tetrahedron that features significant geometric rearrangements around a new interaction surface between capsid protomers. We subsequently find that the tetrahedral assembly can be generated by triple-point mutation to various amino acids and that even a single histidine point mutation is sufficient to form tetrahedra. These findings represent a unique example of tetrahedral geometry when surveying all characterized encapsulins, HK97-like capsids, or indeed any virus-derived capsids reported in the Protein Data Bank, revealing the surprising plasticity of capsid self-assembly that can be accessed through minimal changes in the protein sequence.
Asunto(s)
Proteínas de la Cápside , Cápside , Microscopía por Crioelectrón , Mutación Puntual , Cápside/metabolismo , Cápside/química , Cápside/ultraestructura , Proteínas de la Cápside/genética , Proteínas de la Cápside/química , Proteínas de la Cápside/metabolismo , Myxococcus xanthus/genética , Myxococcus xanthus/metabolismo , Modelos MolecularesRESUMEN
Bortezomib, a small dipeptide-like molecule, is a proteasome inhibitor used widely in the treatment of myeloma and lymphoma. This molecule reacts with threonine side chains near the center of the 20S proteasome and disrupts proteostasis by blocking enzymatic sites that are responsible for protein degradation. In this work, we use novel mass-spectrometry-based techniques to examine the influence of bortezomib on the structures and stabilities of the 20S core particle. These studies indicate that bortezomib binding dramatically favors compact 20S structures (in which the axial gate is closed) over larger structures (in which the axial gate is open)âsuppressing gate opening by factors of at least â¼400 to 1300 over the temperature range that is studied. Thus, bortezomib may also restrict degradation in the 20S proteasome by preventing substrates from entering the catalytic pore. That bortezomib influences structures at the entrance region of the pore at such a long distance (â¼65 to 75 Å) from its binding sites raises a number of interesting biophysical issues.
Asunto(s)
Bortezomib , Complejo de la Endopetidasa Proteasomal , Inhibidores de Proteasoma , Bortezomib/farmacología , Bortezomib/química , Complejo de la Endopetidasa Proteasomal/metabolismo , Complejo de la Endopetidasa Proteasomal/química , Complejo de la Endopetidasa Proteasomal/efectos de los fármacos , Inhibidores de Proteasoma/química , Inhibidores de Proteasoma/farmacología , Modelos Moleculares , Conformación Proteica/efectos de los fármacos , HumanosRESUMEN
Protein capsids are a widespread form of compartmentalisation in nature. Icosahedral symmetry is ubiquitous in capsids derived from spherical viruses, as this geometry maximises the internal volume that can be enclosed within. Despite the strong preference for icosahedral symmetry, we show that simple point mutations in a virus-like capsid can drive the assembly of novel symmetry-reduced structures. Starting with the encapsulin from Myxococcus xanthus, a 180-mer bacterial capsid that adopts the well-studied viral HK97 fold, we use mass photometry and native charge detection mass spectrometry to identify a triple histidine point mutant that forms smaller dimorphic assemblies. Using cryo-EM, we determine the structures of a precedented 60-mer icosahedral assembly and an unprecedented 36-mer tetrahedron that features significant geometric rearrangements around a novel interaction surface between capsid protomers. We subsequently find that the tetrahedral assembly can be generated by triple point mutation to various amino acids, and that even a single histidine point mutation is sufficient to form tetrahedra. These findings represent the first example of tetrahedral geometry across all characterised encapsulins, HK97-like capsids, or indeed any virus-derived capsids reported in the Protein Data Bank, revealing the surprising plasticity of capsid self-assembly that can be accessed through minimal changes in protein sequence.
RESUMEN
Charge detection mass spectrometry (CD-MS) is a single-particle technique, where the masses of individual ions are determined from simultaneous measurements of their mass-to-charge ratio (m/z) and charge. The ions are trapped in an electrostatic linear ion trap (ELIT) and oscillate back and forth through a conducting cylinder connected to a charge-sensitive amplifier. The oscillating ions generate a periodic signal that is processed with fast Fourier transforms (FFTs) to obtain the oscillation frequency (which is related to m/z) and magnitude (which is proportional to the charge). The simultaneous trapping of two or more ions is a way to increase throughput. However, when multiple ions are trapped, it is possible that some of them have overlapping oscillation frequencies, which can lead to an error in the charge determination. To avoid this error, results from overlapping ions are usually discarded. When measurements are performed with many trapped ions, the most abundant m/z species are discarded at a higher rate, which affects the relative abundances in the mass distribution. Here, we report the development of a post-processing method called multiple ion charge extraction (MICE) that uses a statistical approach to assign charges to ions with overlapping frequencies. MICE recovers single-ion information from high signal measurements and makes the relative abundances more resilient to the signal intensity. This approach corrects for high signal m/z biasing, allowing analysis to be faster and more reliable. Using MICE, CD-MS measurements were made at rates of 120 ions/s with little m/z biasing.
RESUMEN
In charge detection mass spectrometry (CD-MS) the mass of each individual ion is determined from the measurement of its mass to charge ratio (m/z) and charge. Performing this measurement for thousands of ions allows mass distributions to be measured for heterogeneous and high mass samples that cannot be analyzed by conventional mass spectrometry (MS). CD-MS opens the door to accurate mass measurements for samples into the giga-Dalton regime, vastly expanding the reach of MS and allowing mass distributions to be determined for viruses, gene therapies, and vaccines. Following the success of CD-MS, single-ion mass measurements have recently been performed on an Orbitrap. CD-MS and Orbitrap individual ion mass spectrometry (I2MS) are described. Illustrative examples are provided, and the prospects for higher resolution measurements discussed. In the case of CD-MS, computer simulations indicate that much higher resolving powers are within reach. The ability to perform high-resolution CD-MS analysis of heterogeneous samples will be enabling and disruptive in top-down MS as high-resolution m/z and accurate charge measurements will allow very complex m/z spectra to be unraveled.
RESUMEN
Self-complementary AAV vectors (scAAV) use a mutant inverted terminal repeat (mITR) for efficient packaging of complementary stranded DNA, enabling rapid transgene expression. However, inefficient resolution at the mITR leads to the packaging of monomeric or subgenomic AAV genomes. These noncanonical particles reduce transgene expression and may affect the safety of gene transfer. To address these issues, we have developed a novel class of scAAV vectors called covalently closed-end double-stranded AAV (cceAAV) that eliminate the mITR resolution step during production. Instead of using a mutant ITR, we used a 56-bp recognition sequence of protelomerase (TelN) to covalently join the top and bottom strands, allowing the vector to be generated with just a single ITR. To produce cceAAV vectors, the vector plasmid is initially digested with TelN, purified, and then subjected to a standard triple-plasmid transfection protocol followed by traditional AAV vector purification procedures. Such cceAAV vectors demonstrate yields comparable to scAAV vectors. Notably, we observed enhanced transgene expression as compared to traditional scAAV vectors. The treatment of mice with hemophilia B with cceAAV-FIX resulted in significantly enhanced long-term FIX expression. The cceAAV vectors hold several advantages over scAAV vectors, potentially leading to the development of improved human gene therapy drugs.
RESUMEN
Nuclear import of the hepatitis B virus (HBV) nucleocapsid is essential for replication that occurs in the nucleus. The ~360-angstrom HBV capsid translocates to the nuclear pore complex (NPC) as an intact particle, hijacking human importins in a reaction stimulated by host kinases. This paper describes the mechanisms of HBV capsid recognition by importins. We found that importin α1 binds a nuclear localization signal (NLS) at the far end of the HBV coat protein Cp183 carboxyl-terminal domain (CTD). This NLS is exposed to the capsid surface through a pore at the icosahedral quasi-sixfold vertex. Phosphorylation at serine-155, serine-162, and serine-170 promotes CTD compaction but does not affect the affinity for importin α1. The binding of 30 importin α1/ß1 augments HBV capsid diameter to ~620 angstroms, close to the maximum size trafficable through the NPC. We propose that phosphorylation favors CTD externalization and prompts its compaction at the capsid surface, exposing the NLS to importins.
Asunto(s)
Virus de la Hepatitis B , Nucleocápside , Humanos , Transporte Activo de Núcleo Celular , Carioferinas , Proteínas de la Cápside , Factores Inmunológicos , SerinaRESUMEN
The large dsDNA viruses replicate their DNA as concatemers consisting of multiple covalently linked genomes. Genome packaging is catalyzed by a terminase enzyme that excises individual genomes from concatemers and packages them into preassembled procapsids. These disparate tasks are catalyzed by terminase alternating between two distinct states-a stable nuclease that excises individual genomes and a dynamic motor that translocates DNA into the procapsid. It was proposed that bacteriophage λ terminase assembles as an anti-parallel dimer-of-dimers nuclease complex at the packaging initiation site. In contrast, all characterized packaging motors are composed of five terminase subunits bound to the procapsid in a parallel orientation. Here, we describe biophysical and structural characterization of the λ holoenzyme complex assembled in solution. Analytical ultracentrifugation, small angle X-ray scattering, and native mass spectrometry indicate that 5 subunits assemble a cone-shaped terminase complex. Classification of cryoEM images reveals starfish-like rings with skewed pentameric symmetry and one special subunit. We propose a model wherein nuclease domains of two subunits alternate between a dimeric head-to-head arrangement for genome maturation and a fully parallel arrangement during genome packaging. Given that genome packaging is strongly conserved in both prokaryotic and eukaryotic viruses, the results have broad biological implications.
Asunto(s)
Empaquetamiento del Genoma Viral , Ensamble de Virus , Ensamble de Virus/genética , Bacteriófago lambda/genética , Endodesoxirribonucleasas/metabolismo , ADN , ADN Viral/metabolismo , Empaquetamiento del ADNRESUMEN
Recombinant adeno-associated viruses (rAAVs) deliver DNA to numerous cell types. However, packaging of partial genomes into the rAAV capsid is of concern. Although empty rAAV capsids are studied, there is little information regarding the impact of partial DNA content on rAAV performance in controlled studies. To address this, we tested vectors containing varying levels of partial, self-complementary EGFP genomes. Density gradient cesium chloride ultracentrifugation was used to isolate three distinct rAAV populations: (1) a lighter fraction, (2) a moderate fraction, and (3) a heavy fraction. Alkaline gels, Illumina Mi-Seq, size exclusion chromatography with multi-angle light scattering (SEC-MALS), and charge detection mass spectrometry (CD-MS) were used to characterize the genome of each population and ddPCR to quantify residual DNA molecules. Live-cell imaging and EGFP ELISA assays demonstrated reduced expression following transduction with the light fraction compared with the moderate and heavy fractions. However, PCR-based assays showed that the light density delivered EGFP DNA to cells as efficiently as the moderate and heavy fractions. Mi-Seq data revealed an underrepresentation of the promoter region for EGFP, suggesting that expression of EGFP was reduced because of lack of regulatory control. This work demonstrates that rAAVs containing partial genomes contribute to the DNA signal but have reduced vector performance.
RESUMEN
Charge detection mass spectrometry (CDMS) was examined as a means of studying proteasomes. To this end, the following masses of the 20S, 19S, 26S, and 30S proteasomes from Saccharomyces cerevisiae (budding yeast) were measured: m(20S) = 738.8 ± 2.9 kDa, m(19S) = 926.2 ± 4.8 kDa, m(26S) = 1,637.0 ± 7.6 kDa, and m(30S) = 2,534.2 ± 10.8 kDa. Under some conditions, larger (20S)x (where x = 1 to â¼13) assemblies are observed; the 19S regulatory particle also oligomerizes, but to a lesser extent, forming (19S)x complexes (where x = 1 to 4, favoring the x = 3 trimer). The (20S)x oligomers are favored in vitro, as the pH of the solution is lowered (from 7.0 to 5.4, in a 20 mM ammonium acetate solution) and may be related to in vivo proteasome storage granules that are observed under carbon starvation. From measurements of m(20S)x (x = 1 to â¼13) species, it appears that each multimer retains all 28 proteins of the 20S complex subunit. Several types of structures that might explain the formation of (20S)x assemblies are considered. We stress that each structural type [hypothetical planar, raft-like geometries (where individual proteasomes associate through side-by-side interactions); elongated, rodlike geometries (where subunits are bound end-to-end); and geometries that are roughly spherical (arising from aggregation through nonspecific subunit interactions)] is highly speculative but still interesting to consider, and a short discussion is provided. The utility of CDMS for characterizing proteasomes and related oligomers is discussed.
Asunto(s)
Espectrometría de Masas , Complejo de la Endopetidasa Proteasomal/química , Espectrometría de Masas/instrumentación , Espectrometría de Masas/métodos , Modelos Moleculares , Concentración de Iones de Hidrógeno , Saccharomyces cerevisiae/químicaRESUMEN
Recombinant adeno-associated virus (rAAV) is a leading gene therapy vector. However, neutralizing antibodies reduce its efficacy. Traditional methods used to investigate antibody binding provide limited information. Here, charge detection mass spectrometry (CD-MS) was used to investigate the binding of monoclonal antibody ADK8 to AAV serotype 8 (AAV8). CD-MS provides a label-free approach to antibody binding. Individual binding events can be monitored as each event is indicated by a shift of the antibody-antigen complex to a higher mass. Unlike other methods, the CD-MS approach reveals the distribution of antibodies bound on capsids, allowing AAV8 subpopulations with different affinities to be identified. The charge state generated by the electrospray of large ions is normally correlated with the structure, and the charge is expected to increase when an antibody binds to the capsid exterior. Surprisingly, binding of the first ADK8 to AAV8 causes a substantial decrease in the charge, suggesting that the first antibody binding event causes a significant structural change. The charge increases for subsequent binding events. Finally, high ADK8 concentrations cause agglutination, where ADK8 links AAV capsids to form dimers and higher order multimers.