RESUMEN
BACKGROUND: Master-slave remote control technology allows patients to be treated promptly during transport and also reduces the risk of contagious infections. Endotracheal intubation, guided by endoscopy and a master-slave system, enables doctors to perform the procedure efficiently and accurately. METHODS: In this paper, we present the development of a master-slave controlled endotracheal intubation robot (EIR). It is based on operation incremental mapping, a weighted recursive average filtering method to reduce vibration, and a virtual fixture designed to reduce mishandling in minimally invasive surgery. RESULTS: Simulation analysis of the master-slave control demonstrates that the weighted recursive average filtering method effectively reduces vibration, while the virtual fixture assists in confining the operator's movement within a delimited area. Experimental validation confirms the validity of the robot's structural design and control method. CONCLUSIONS: The developed robot successfully achieves the necessary motion for endotracheal intubation surgery through master-slave control.
Asunto(s)
Diseño de Equipo , Intubación Intratraqueal , Movimiento (Física) , Procedimientos Quirúrgicos Robotizados , Intubación Intratraqueal/métodos , Intubación Intratraqueal/instrumentación , Humanos , Procedimientos Quirúrgicos Robotizados/métodos , Simulación por Computador , Algoritmos , Reproducibilidad de los Resultados , Procedimientos Quirúrgicos Mínimamente Invasivos/métodos , Robótica/métodos , Endoscopía/métodos , VibraciónRESUMEN
Insects can adapt their walking patterns to complex and varied environments and retain the ability to walk even after significant changes in their physical attributes, such as amputation. Although the interleg coordination of intact insects has been widely described in previous studies, the adaptive walking patterns in free-walking insects with amputation of 1 or more legs are still unclear. The pentatomid bug Erthesina fullo exhibits a tripod gait, when walking freely on horizontal substrates, like many other insects. In this study, amputations were performed on this species to investigate changes in interleg coordination. The walking parameters were analyzed, such as the locations of touchdown and liftoff, cycle period, walking speed, and head displacement of intact and amputated insects. The results show that E. fullo displays adaptive interleg coordination in response to amputations. With 1 amputated leg, bugs changed to a 3-unit gait, whereas with 2 amputated legs they employed a wave gait. These data are helpful in exploring the motion mode control in walking insects and provide the theoretical basis for the gait control strategy of robots, when leg failure occurs.
RESUMEN
Venous blood collection testing is one of the most commonly used medical diagnostic methods. Compared with conventional venous blood collection, robotic collection can reduce needle-stick injuries, medical staff workload, and infection risk; allow doctor-patient isolation; and improve collection reliability. Existing venous blood collection robots use rigid puncture needles, which can easily puncture the lower wall of blood vessels, causing vessel damage and collection failure. This paper proposes a bionic blood collection strategy based on a composite puncture needle that mimics the structure and function of mosquito mouthparts. A bionic composite puncture needle insertion system with puncture-force sensing was designed, and venipuncture forces were simulated and mathematically modelled. A prototype insertion system was built and used in an experiment, which demonstrated effective composite puncture blood collection and explored the factors influencing puncture force. Puncture force decreases with increased puncture speed and angle and with a decreased needle diameter. This provides a basis for optimising the parameters of blood collection robots.
RESUMEN
The exploration of the planet Mars still is a top priority in planetary science. The Mars surface is extensively covered with soil-like material. Current wheeled rovers on Mars have been occasionally experiencing immobilization instances in unexpectedly weak terrains. The development of Mars rovers adaptable to these terrains is instrumental in improving exploration efficiency. Inspired by locomotion of the desert lizard, this paper illustrates a biomimetic quadruped robot with structures of flexible active spine and toes. By accounting for spine lateral flexion and its coordination with four leg movements, three gaits of tripod, trot and turning are designed. The motions corresponding to the three gaits are conceptually and numerically analyzed. On the granular terrains analog to Martian surface, the gasping forces by the active toes are estimated. Then traversing tests for the robot to move on Martian soil surface analog with the three gaits were investigated. Moreover, the traversing characteristics for Martian rocky and slope surface analog are analyzed. Results show that the robot can traverse Martian soil surface analog with maximum forward speed 28.13 m s-1turning speed 1.94° s-1and obstacle height 74.85 mm. The maximum angle for climbing Martian soil slope analog is 28°, corresponding slippery rate 76.8%. It is predicted that this robot can adapt to Martian granular rough terrain with gentle slopes.
Asunto(s)
Marte , Robótica , Medio Ambiente Extraterrestre , Biomimética , SueloRESUMEN
Aquatic locomotion is challenging for land-dwelling creatures because of the high degree of fluidity with which the water yields to loads. We surprisingly found that the Chinese rice grasshopper Oxya chinensis, known for its terrestrial acrobatics, could swiftly launch itself off the water's surface in around 25 ms and seamlessly transition into flight. Biological observations showed that jumping grasshoppers use their front and middle legs to tilt up bodies first and then lift off by propelling the water toward the lower back with hind legs at angular speeds of up to 18°/ms, whereas the swimming grasshoppers swing their front and middle legs in nearly horizontal planes and move hind legs less violently (~8°/ms). Force measurement and model analysis indicated that the weight support could be achieved by hydrostatics which are proportionate to the mass of the grasshoppers, while the propulsions for motion are derived from the controlled limb-water interactions (i.e., the hydrodynamics). After learning the structural and behavioral strategies of the grasshoppers, a robot was created and was capable of swimming and jumping on the water surface like the insects, further demonstrating the effectiveness of decoupling the challenges of aquatic locomotion by the combined use of the static and dynamic hydro forces. This work not only uncovered the combined mechanisms responsible for facilitating aquatic acrobatics in this species but also laid a foundation for developing bioinspired robots that can locomote across multiple media.
Asunto(s)
Saltamontes , Robótica , Animales , Locomoción , Insectos , Agua , Fenómenos BiomecánicosRESUMEN
Dynamic attachment is indispensable for animals to cope with unexpected disturbances. Minor attention has been paid to the dynamic performance of insects' adhesive pads. Through experiments pulling whole grasshoppers off a glass rod at varying speeds, surprising findings emerged. The feet did not always maintain contact but released and then reconnected to the substrate rapidly during leg extension, potentially reducing the shock damage to pads. As the pulling speeds increased from 1 to 400 mm/s, the maximum forces of single front tarsus insects and entire tarsi insects were nearly proportional to the 1/3 power of pulling speeds by 0.11 and 0.29 times, respectively. The force of some individuals could be even 800 times greater than their weight, which is unexpectedly high for smooth insect pads. This work not only helps us to understand the attachment intelligence of animals but is also informative for artificial attachment in extreme situations.
RESUMEN
Robot-assisted rehabilitation has exhibited great potential to enhance the motor function of physically and neurologically impaired patients. State-of-the-art control strategies usually allow the rehabilitation robot to track the training task trajectory along with the impaired limb, and the robotic motion can be regulated through physical human-robot interaction for comfortable support and appropriate assistance level. However, it is hardly possible, especially for patients with severe motor disabilities, to continuously exert force to guide the robot to complete the prescribed training task. Conversely, reduced task difficulty cannot facilitate stimulating patients' potential movement capabilities. Moreover, challenging more difficult tasks with minimal robotic assistance is usually ignored when subjects show improved performance. In this paper, a control framework is proposed to simultaneously adjust both the training task and robotic assistance according to the subjects' performance, which can be estimated from the users' electromyography signals. Concretely, a trajectory deformation algorithm is developed to generate smooth and compliant task motion while responding to pHRI. An assist-as-needed (ANN) controller along with a feedback gain modification algorithm is designed to promote patients' active participation according to individual performance variance on completing the training task. The proposed control framework is validated using a lower extremity rehabilitation robot through experiments. The experimental results demonstrate that the control scheme can optimize the robotic assistance to complete the subject-adaptation training task with high efficiency.
RESUMEN
Insects that can perform flapping-wing flight, climb on a wall, and switch smoothly between the 2 locomotion regimes provide us with excellent biomimetic models. However, very few biomimetic robots can perform complex locomotion tasks that combine the 2 abilities of climbing and flying. Here, we describe an aerial-wall amphibious robot that is self-contained for flying and climbing, and that can seamlessly move between the air and wall. It adopts a flapping/rotor hybrid power layout, which realizes not only efficient and controllable flight in the air but also attachment to, and climbing on, the vertical wall through a synergistic combination of the aerodynamic negative pressure adsorption of the rotor power and a climbing mechanism with bionic adhesion performance. On the basis of the attachment mechanism of insect foot pads, the prepared biomimetic adhesive materials of the robot can be applied to various types of wall surfaces to achieve stable climbing. The longitudinal axis layout design of the rotor dynamics and control strategy realize a unique cross-domain movement during the flying-climbing transition, which has important implications in understanding the takeoff and landing of insects. Moreover, it enables the robot to cross the air-wall boundary in 0.4 s (landing), and cross the wall-air boundary in 0.7 s (taking off). The aerial-wall amphibious robot expands the working space of traditional flying and climbing robots, which can pave the way for future robots that can perform autonomous visual monitoring, human search and rescue, and tracking tasks in complex air-wall environments.
RESUMEN
This study proposed a vessel segmentation method based on Gabor features. According to the eigenvector of Hessian matrix of each pixel in the image, the vessel direction of each point was obtained to set the direction angle of Gabor filter, and the Gabor features of different vessel width at each point were extracted to establish the 6D vectors of each point. By reducing the dimension of the 6D vector, the 2D vector of each point was obtained and fused with the original image G channel. U-Net neural network was used to classify the fused image to segment vessels. The experimental results of this method in DRIVE dataset showed that this method had a good effect on the detection of small vessels and vessels at the intersection.
Asunto(s)
Algoritmos , Procesamiento de Imagen Asistido por Computador , Redes Neurales de la Computación , Vasos RetinianosRESUMEN
The majority of sprawling-posture quadrupedal vertebrates, such as geckos and lizards, adopt a cyclical lateral swing pattern of their trunk that is coordinated with limb movements to provide extraordinary flexibility and mobility. Inspired by the gecko's locomotory gait and posture, a gecko-like robot with a flexible spine driven by shape memory alloy (SMA) springs was proposed in this work. The static parameters of the SMA spring were experimentally measured, and the flexible spine driven by SMA springs can be deflected bidirectionally. A kinematic model of the spine mechanism was established, and the mathematical relationship between the thermodynamic behavior of the SMA springs and spinal deflection was systematically analyzed. When a gecko trots with a lateral swing pattern of its trunk, the body and the spine show a standing wave shape and a single-peak C-type curve, respectively. The lateral spine deflection and trotting gait were combined in a collaborative model of a flexible spine and limbs to describe in detail the specific relationships between leg joint variables and spine deflection angle. Planar motion tests of a prototype robot were also conducted by using four high-speed cameras to record the trajectory of each point of the body, which verified the proposed model. From the acquired results, it was demonstrated that, compared with a rigid body, a robot with a flexible spine has a longer stride length, higher speed, and a greatly reduced turning radius.
Asunto(s)
Lagartos , Robótica , Animales , Aleaciones con Memoria de Forma , Locomoción , Columna VertebralRESUMEN
Exploring Mars is beneficial to increasing our knowledge, understanding the possibility of ancient microbial life there, and discovering new resources beyond the Earth to prepare for future human missions to Mars. To assist ambitious uncrewed missions to Mars, specific types of planetary rovers have been developed for performing tasks on Mars' surface. Due to the fact that the surface is composed of granular soils and rocks of various sizes, contemporary rovers can have difficulties in moving on soft soils and climbing over rocks. To overcome such difficulties, this research develops a quadruped creeping robot inspired by the locomotion characteristics of the desert lizard. This biomimetic robot features a flexible spine, which allows swinging movements during locomotion. The leg structure utilizes a four-linkage mechanism, which ensures a steady lifting motion. The foot consists of an active ankle and a round pad with four flexible toes that are effective in grasping soils and rocks. To determine robot motions, kinematic models relating to foot, leg, and spine are established. Moreover, the coordinated motions between the trunk spine and leg are numerically verified. In addition, the mobility on granular soils and rocky surface are experimentally demonstrated, which can imply that this biomimetic robot is suitable for Mars surface terrains.
RESUMEN
This study examined the morphological characteristics and mechanical properties of the wings of Tirumala limniace. The wings of this butterfly, including the forewings and hindwings, are composed mainly of a flexible wing membrane and supporting wing veins. Scanning electron microscopy was employed to observe specific positions of the wing membrane and veins and reveal the morphological characteristics. Tensile experiments were conducted to evaluate the mechanical properties of the wings and proved that the multifiber layer structures have a significantly fixed orientation of fiber alignment. A butterfly wing model reconstructed in reverse based on the finite element method was used to analyze the static characteristics of the wing structure in detail. Evaluation of stress and strain after applying uniform loading, perpendicular loading, and torsion revealed that minor wing deformation occurred and was concentrated near the main wing vein, which verifies the steadiness of the butterfly wing structure. Additionally, the flapping of butterfly wings was simulated using computational fluid dynamics to study the flow field near the butterfly wings and the distribution of pressure gradient on the wings. The results confirmed the effect of wing veins on maintaining the flight performance.
Asunto(s)
Mariposas Diurnas , Animales , Mariposas Diurnas/fisiología , Análisis de Elementos Finitos , Alas de Animales/anatomía & histología , Vuelo Animal/fisiología , Simulación por Computador , Modelos Biológicos , Fenómenos BiomecánicosRESUMEN
A static environment is a prerequisite for the stable operation of most visual SLAM systems, which limits the practical use of most existing systems. The robustness and accuracy of visual SLAM systems in dynamic environments still face many complex challenges. Only relying on semantic information or geometric methods cannot filter out dynamic feature points well. Considering the problem of dynamic objects easily interfering with the localization accuracy of SLAM systems, this paper proposes a new monocular SLAM algorithm for use in dynamic environments. This improved algorithm combines semantic information and geometric methods to filter out dynamic feature points. Firstly, an adjusted Mask R-CNN removes prior highly dynamic objects. The remaining feature-point pairs are matched via the optical-flow method and a fundamental matrix is calculated using those matched feature-point pairs. Then, the environment's actual dynamic feature points are filtered out using the polar geometric constraint. The improved system can effectively filter out the feature points of dynamic targets. Finally, our experimental results on the TUM RGB-D and Bonn RGB-D Dynamic datasets showed that the proposed method could improve the pose estimation accuracy of a SLAM system in a dynamic environment, especially in the case of high indoor dynamics. The performance effect was better than that of the existing ORB-SLAM2. It also had a higher running speed than DynaSLAM, which is a similar dynamic visual SLAM algorithm.
RESUMEN
Traditional mobile robots are mainly divided into wheeled robots and legged robots. They have good performance at fast-moving speeds and crossing obstacles, and weak terrain adaptability and moving speeds, respectively. Combining the advantages of these two types mentioned, a multi-functional wheel-legged hexapod robot with strong climbing capacity was designed in this paper. Each wheel-leg of the robot is driven directly by a single motor and can move smoothly and quickly in a diagonal tripod gait. Based on the obstacle-crossing way of the wheel-leg and combined with the characteristics of insects moving stably in nature, the middle part of the robot body is wider than head and tail. Tripod gait was selected to control the robot locomotion. A series of simulations and experiments were conducted to validate its excellent adaptability to various environmental conditions. The robot can traverse rugged, broken, and obstacle-ridden ground and cross rugged surfaces full of obstacles without any terrain sensing or actively controlled adaptation. It can negotiate obstacles of approximately its own height, which is much higher than its centre of gravity range.
RESUMEN
Adhesion robots have broad application prospects in the field of spacecraft inspection, repair, and maintenance, but the stable adhesion and climbing on the flexible surface covering the spacecraft has not been achieved. The flexible surface is easily deformed when subjected to external force, which makes it difficult to ensure a sufficient contact area and then detach from it. To achieve stable attachment and easy detachment on the flexible surface under microgravity, an adhesion model is established based on the applied adhesive material, and the relationship between peeling force and the rigidity of the base material, peeling angle, and working surface stiffness is obtained. Combined with the characteristics of variable stiffness structure, the adhesion and detachment force of the foot is asymmetric. Inspired by the adhesion-detachment mechanism of the foot of the gecko, an active adhesion-detachment control compliant mechanism is designed to achieve the stable attachment and safe detachment of the foot on the flexible surface and to adapt to surfaces with different rigidity. The experimental results indicate that a maximum normal adhesion force of 7.66 N can be generated when fully extended, and the safe detachment is achieved without external force on a flexible surface. Finally, an air floating platform is used to build a microgravity environment, and the crawling experiment of a gecko-inspired robot on a flexible surface under microgravity is completed. The experimental results show that the gecko-inspired foot with variable stiffness can satisfy the requirements of stable crawling on flexible surfaces.
RESUMEN
Insects in nature flap their wings to generate lift force and driving torque to adjust their attitude and control stability. An insect wing is a biomaterial composed of flexible membranes and tough veins. In this paper, we study the microscopic structures and mechanical properties of the forewing of the black cicada, Cryptotympana atrata. The thickness of the wing membranes and the diameter of veins varied from the wing root to the tip. The thickness of the wing membranes ranged from 6.0 to 29.9 µm, and the diameter of the wing veins decreased in a gradient from the wing root to the tip, demonstrating that the forewing of the black cicada is a nonuniform biomaterial. The elastic modulus of the membrane near the wing root ranged from 4.45 to 5.03 GPa, which is comparable to that of some industrial membranes. The microstructure of the wing vein exhibited a hollow tubular structure with flocculent structure inside. The "fresh" sample stored more water than the "dry" sample, resulting in a significant difference in the elastic modulus between the fresh and dried veins. The different membrane thicknesses and elastic moduli of the wing veins near the root and tip resulted in varied degrees of deformation on both sides of the flexion line of the forewing during twisting. The measurements of the forewing of the cicada may serve as a guide for selecting airfoil materials for the bionic flapping-wing aircraft and promote the design and manufacture of more durable bionic wings in the future. RESEARCH HIGHLIGHTS: The distribution of the wing vein diameter and the wing membrane thickness indicated that the forewing of Cryptotympana atrata is composed of heterogeneous materials. The wing membrane and the outer wall of the wing vein are the layered structure with multilayer fibers, which has a great significance for improving the ability of the forewing to sustain aerodynamic loads. The elastic modulus of the wing membrane near the wing root is in the range of 4.45-5.03 GPa, which is comparable to that of membranes manufactured by industries. This is a suitable reference for selecting materials for making bionic aircraft wings. We proved that the elastic moduli of the "fresh" and "dry" wing veins differ greatly compared with those of the wing membrane. Because the wing vein microstructure exhibits an internal hollow tubular structure with flocculent structure inside, the "fresh" sample stores more water than the "dry" sample. The wing membrane near the wing root is thicker and reinforced by the main wing vein with a high elastic modulus. This renders the region near the wing root difficult to deform. The membrane far from the wing root is thinner and the elastic modulus of the nearby wing veins is smaller, making them more flexible.
Asunto(s)
Hemípteros , Animales , Materiales Biocompatibles , Fenómenos Biomecánicos , Módulo de Elasticidad , Insectos , Modelos Biológicos , Agua , Alas de Animales/ultraestructuraRESUMEN
Today's gecko-inspired robots have shown the ability of omnidirectional climbing on slopes with a low centre of mass. However, such an ability cannot efficiently cope with bumpy terrains or terrains with obstacles. In this study, we developed a gecko-inspired robot (Nyxbot) with an adaptable body height to overcome this limitation. Based on an analysis of the skeletal system and kinematics of real geckos, the adhesive mechanism and leg structure design of the robot were designed to endow it with adhesion and adjustable body height capabilities. Neural control with exteroceptive sensory feedback is utilised to realise body height adaptability while climbing on a slope. The locomotion performance and body adaptability of the robot were tested by conducting slope climbing and obstacle crossing experiments. The gecko robot can climb a 30° slope with spontaneous obstacle crossing (maximum obstacle height of 38% of the body height) and can climb even steeper slopes (up to 60°) without an obstacle or bump. Using 3D force measuring platforms for ground reaction force analysis of geckos and the robot, we show that the motions of the developed robot driven by neural control and the motions of geckos are dynamically comparable. To this end, this study provides a basis for developing climbing robots with adaptive bump/obstacle crossing on slopes towards more agile and versatile gecko-like locomotion.
Asunto(s)
Lagartos , Robótica , Animales , Fenómenos Biomecánicos , Locomoción , Movimiento (Física)RESUMEN
Continuum robots with redundant degrees of freedom and postactuated devices are suitable for application in aerospace, nuclear facilities, and other narrow and multiobstacle special environments. The development of a snake-inspired continuum robot is presented in this study. The morphological skeleton structure of the snake body is simulated using underactuated continuum joints, which include several rigid-body joints in series. Each rigid-body joint is driven by the traction of a wire rope. Based on the layered-drive principle, angular synchronous motion can be realized in space with multiple rigid-body joints in a single continuous joint, which can considerably reduce the complexity of the inverse kinematics solution, terminal drive box, and control system. The static and dynamic characteristics of the snake-inspired robot are obtained through torque balance and an equivalent transformation. Finally, we demonstrate trajectory planning and load capacity testing in two robot prototypes with arm lengths of 1500 and 2300 mm (including two and four continuous joints, respectively). The rationality of the structure and the correctness of the control of the layered-drive snake-inspired robot are verified.
Asunto(s)
Robótica , Fenómenos Biomecánicos , TorqueRESUMEN
With marathon-running grew in popularity, the effect of long-distance running on plantar pressure has been more attractive. It has been proposed that long-distance running influences the deviation in the center of pressure (COP) during standing and the changes to plantar pressure during walking. The objective of this study was to observe the effects on the COP motion amplitude of static standing and the plantar pressure distribution of walking after long-distance running. The influence of a 10-km run on changes to plantar pressure was assessed during standing and walking. Plantar pressure was measured before and immediately after running. In the study, seven males and five females participated in barefoot tests of static standing and dynamic walking. In the static standing tests, COP was measured under the following four ordered conditions: (1) bipedal, eyes open, standing; (2) bipedal, eyes closed, standing; (3) unipedal, eyes open, standing and (4) unipedal, eyes closed, standing. Under each condition, the data was collected while a stable standing posture for 10 s. In the dynamic walking tests, the contact duration and plantar pressure were recorded. The standing tests results revealed no significant differences between males and females while slight differences before vs. after running. Running for a single time had no effect on COP deviation during standing. The walking tests results revealed an initial landing on the lateral heel. After landing on the lateral heel, the females quickly transferred to the medial heel. The movement of the pressure to the medial heel was slower in males than females. After running, the pressure of females was more inward, while that of males was more outward under the metatarsal zones in the propulsion phase.
Asunto(s)
Pie , Huesos Metatarsianos , Femenino , Talón , Humanos , Masculino , Posición de Pie , CaminataRESUMEN
Developing climbing robots for smooth vertical surfaces (e.g., glass) is one of the most challenging problems in robotics. Here, the adequate functioning of an adhesive foot is an essential factor for successful locomotion performance. Among the various technologies (such as dry adhesion, wet adhesion, magnetic adhesion, and pneumatic adhesion), bio-inspired dry adhesion has been actively studied and successfully applied to climbing robots. Thus, this review focuses on the characteristics of two different types of foot microstructures, namely spatula-shaped and mushroom-shaped, capable of generating such adhesion. These are the most used types of foot microstructures in climbing robots for smooth vertical surfaces. Moreover, this review shows that the spatula-shaped feet are particularly suitable for massive and one-directional climbing robots, whereas mushroom-shaped feet are primarily suitable for light and all-directional climbing robots. Consequently, this study can guide roboticists in selecting the right adhesive foot to achieve the best climbing ability for future robot developments.