Electrochemical HPLC Determination of Piperazine Antihistamine Drugs Employing a Spark-Generated Nickel Oxide Nanoparticle-Modified Carbon Fiber Microelectrode.

In this work, we demonstrate a sensitive high-performance liquid chromatography (HPLC) method for the determination of piperazine antihistamine drugs employing innovative electrochemical detection based on a spark-generated nickel oxide nanoparticle-modified carbon fiber microelectrode built into a miniaturized electrochemical detector. The direct carbon fiber-to-nickel plate electrode spark discharge, carried at 0.8 kV DC, with the nickel electrode connected to the negative pole of the high-voltage power supply, provides extremely fast (1 s) in situ tailoring of the carbon fiber microelectrode surface by nickel oxide nanoparticles. It has been found that nickel oxide nanoparticles exhibit an electrocatalytic effect toward the piperazine moiety electrooxidation process, as confirmed by voltammetric experiments, revealing the shift in the peak potential from 1.25 to 1.09 V versus Ag/AgCl. Cetirizine, cyclizine, chlorcyclizine, flunarizine, meclizine, and buclizine were selected as sample piperazine antihistamine drugs, while diclofenac served as an internal standard. The isocratic reversed-phase separation of the above set was achieved within 15 min using an ARION-CN 3 µm column with a binary mobile phase consisting of 50 mM phosphate buffer (pH 3) and methanol (45/55, v/v). The limits of detection (LOD) were within the range of 3.8-120 nM (for cyclizine and buclizine) at E = +1500 mV (vs Ag/AgCl), while the response was linear within the concentration range measured up to 5 µmol L-1. The method was successfully applied to the determination of piperazine antihistamine drugs in spiked plasma samples.

Copper nanowire coated carbon fibers as efficient substrates for detecting designer drugs using SERS.

Miniature Surface Enhanced Raman Scattering (SERS) sensors were fabricated by coating the carbon fiber microelectrodes with copper nanowires. The coating procedure, based on anodizing the copper wire in ultrapure water followed by cathodic deposition of the anode-derived material onto carbon fiber electrodes, provides a "clean" copper nanowire network. The developed miniature (10µm in diameter and 2mm in length) and nanoscopically rough SERS substrates are applicable in drug sensing, as shown by the detection and resolving of a range of seized designer drugs in trace amounts (microliter volumes of 10-10-10-12M solutions). The copper nanowire modified carbon microfiber substrates could also find further applications in biomedical and environmental sensing.

HPLC-ED of low-molecular weight brominated phenols and tetrabromobisphenol A using pretreated carbon fiber microelectrode.

Electrochemically pretreated carbon fiber microelectrode was used to develop a simple, fast and sensitive HPLC-ECD method for the determination of brominated phenols. In addition to simple mono-, di- and tri-bromophenols (4-bromophenol, 2,4-dibromophenol, 2,6-dibromophenol, 2,4,6-tri-bromophenol) the possibility of electrochemical detection of 3,3',5,5'-tetrabromobisphenol A in oxidation mode is reported for the first time. The isocratic separation was achieved within 14 min using ternary mobile phase consisting of 50mM-phosphate buffer (pH 3.5), acetonitrile and methanol (35/15/50, v/v), and detection potential of E=+1450 mV (vs. Ag/AgCl). The carbon fiber microelectrode permitted to use high anodic potentials (up to +1800 mV vs. Ag/AgCl), the optimum analytical response was achieved at +1450 mV vs. Ag/AgCl. The limits of detection (LOD) for the studied analytes were within the range of 1.8-56.6 ng mL(-1). The developed method was applied to determination of brominated phenols in spiked water samples. Furthermore, after simple extraction with methyl tert-butyl ether, it was possible to quantify tetrabromobisphenol A (TBBA) in a piece of CRT monitor plastic casing. The found amount of TBBA was 10.22 mg kg(-1) (±0.43).

Electrochemical behavior of quinoxalin-2-one derivatives at mercury electrodes and its analytical use.

Derivatives of quinoxalin-2-one are interesting compounds with potential pharmacological activity. From this point of view, understanding of their electrochemical behavior is of great importance. In the present paper, a mechanism of electrochemical reduction of quinoxalin-2-one derivatives at mercury dropping electrode was proposed. Pyrazine ring was found to be the main electroactive center undergoing a pH-dependent two-electron reduction process. The molecule protonization of nitrogen in the position 4 precedes the electron acceptance forming a semiquinone radical intermediate which is relatively stable in acidic solutions. Its further reduction is manifested by separated current signal. A positive mesomeric effect of the nonprotonized amino group in the position 7 of the derivative III accelerates the semiquinone reduction yielding a single current wave. The suggested reaction mechanism was verified by means of direct current polarography, differential pulse, cyclic and elimination voltammetry, and coulometry with subsequent GC/MS analysis. The understanding of the mechanism was applied in developing of analytical method for the determination of the studied compounds.

Electrochemically pretreated carbon microfiber electrodes as sensitive HPLC-EC detectors.

The paper focuses on the analysis and detection of electroactive compounds using high-performance liquid chromatography (HPLC) combined with electrochemical detection (EC). The fabrication and utilization of electrochemically treated carbon fiber microelectrodes (CFMs) as highly sensitive amperometric detectors in HPLC are described. The applied pretreatment procedure is beneficial for analytical characteristics of the sensor as demonstrated by analysis of the model set of phenolic acids. The combination of CFM with separation power of HPLC technique allows for improved detection limits due to unique electrochemical properties of carbon fibers. The CFM proved to be a promising tool for amperometric detection in liquid chromatography.

Electrochemical oxidation of berberine and mass spectrometric identification of its oxidation products.

Electrochemical oxidation of the isoquinoline alkaloid berberine in aqueous medium was studied by cyclic and differential pulse voltammetry at a glassy carbon electrode (GCE). Two anodic peaks of the quaternary form of berberine were observed at +1.2V and +1.4V (vs. SCE) in acidic and neutral solutions. When the anodic polarization exceeded the value of +1.1 V, the redox active film is formed on the GCE surface. The formation of adsorbed film was well-documented by quasireversible redox couple at +0.25 V which was studied in redox cycling experiments. In alkaline medium, a new anodic peak at +0.5 V appeared due to oxidation of berberine pseudobase to 8-oxoberberine. Solutions of berberine at different pH were subjected to controlled potential electrolysis on platinum gauze electrode and analyzed using liquid chromatography (HPLC) equipped with electrospray ionization/quadrupole time-of-flight mass spectrometry. The main water soluble monomeric product of berberine oxidation under physiological-near experimental conditions, OP1, was identified as demethyleneberberine cation (2,3-dihydroxy-9,10-dimethoxy-5,6-dihydroisoquinolino[3,2-a]isoquinolin-7-ium).

High-performance liquid chromatographic method with amperometric detection employing boron-doped diamond electrode for the determination of sildenafil, vardenafil and their main metabolites in plasma.

A simple, fast and sensitive HPLC method with electrochemical detection employing boron-doped diamond electrode (BDD) for the determination of sildenafil (Viagra™), vardenafil (Levitra™) and their main metabolites, N-desmethyl sildenafil and N-desethyl vardenafil in human plasma is presented. The assay involved drug extraction by tert-butyl methyl ether and isocratic reversed-phase liquid chromatography with amperometric detection. Complete separation of all analytes was achieved within 12 min. The mobile phase consisted of 20mM sodium dihydrogen phosphate with 40 mM sodium perchlorate/acetonitrile (70:30, v/v), pH 3.5. The electrode working potential was +1520 mV (vs. Pd/H(2)). Calibration curves were linear over the concentration range of 10-400 ng mL(-1). Phloretin was used as an internal standard. The limits of detection (LOD) and quantification (LOQ) for the studied analytes were within the range of 2-4 ng mL(-1) and 7.0-13.4 ng mL(-1), respectively. The developed method was applied to human plasma samples spiked with analytes at therapeutic concentrations. The study confirms the method's suitability for both pharmacokinetic studies and therapeutic monitoring.

Electrochemical characterization of repaglinide and its determination in human plasma using liquid chromatography with dual-channel coulometric detection.

A simple, fast and sensitive HPLC method employing dual-channel coulometric detection for the determination of repaglinide in human plasma is presented. The assay involved extraction of repaglinide by ethyl acetate and isocratic reversed-phase liquid chromatography with dual-channel coulometric detection. The mobile phase composition was 50mM disodium hydrogen phosphate/acetonitrile (60:40, v/v), pH of the mobile phase 7.5 set up with phosphoric acid. For all analyses, the first cell working potential was +380mV, the second was +750mV (vs. Pd/H(2)). Calibration curve was linear over the concentration range of 5-500nmolL(-1). Rosiglitazone was used as an internal standard. The limit of detection (LOD) was established at 2.8nmolL(-1), and the lower limit of quantification (LLOQ) at 8.5nmolL(-1). The developed method was applied to human plasma samples spiked with repaglinide at therapeutical concentrations. It was confirmed that the method is suitable for pharmacokinetic studies or therapeutic monitoring.

Determination of antihyperglycemic drugs in nanomolar concentration levels by micellar electrokinetic chromatography with non-ionic surfactant.

A method for the separation of six selected antihyperglycemic (antidiabetic) drugs (tolbutamide, gliclazide, glimepiride, glibenclamide, repaglinide, and glipizide) was developed with use of micellar electrokinetic chromatography. Two non-ionic poly(ethylene glycol)-based surfactants Genapol X-080 and Triton X-114 (reduced) were studied as neutral pseudostationary phases. High alkaline pH 10.0 was used to obtain negative charges of separated antidiabetic drugs and non-ionic surfactants were employed for selectivity alteration. Both non-ionic surfactants provided good selectivity at concentration 0.2% (v/v) in sodium borate buffer and the separation of six drugs was obtained within 5min. An on-line preconcentration method based on reversed electrode polarity switching was employed for the determination of antihyperglycemic drugs in blood serum after acetonitrile protein precipitation. The limits of detection ranged from 20.8nmolL(-1) for tolbutamide to 6.5nmolL(-1) for glibenclamide, respectively.

Capillary electrophoresis-based nanoscale assays for monitoring ecto-5'-nucleotidase activity and inhibition in preparations of recombinant enzyme and melanoma cell membranes.

Powerful capillary electrophoresis (CE) methods were developed for monitoring the reaction of ecto-5'-nucleotidase (ecto-5'-NT, CD73), a (patho)biochemically important enzyme that hydrolyzes nucleoside-5'-monophosphates to the corresponding nucleosides. The enzymatic reaction was performed either before injection into the capillary (method A) or directly within the capillary (method B). In method A, separation of substrates and products was achieved within 8 min using an eCAP fused-silica capillary (20 cm effective length, 75 microM i.d., UV detection at 260 nm), 40 mM sodium borate buffer (pH 9.1), normal polarity, and a constant voltage of 15 kV. In method B, the sandwich technique was applied; substrate dissolved in reaction buffer (10mM Hepes [pH 7.4], 2mM MgCl2, and 1mM CaCl2) was hydrodynamically injected into a fused-silica capillary (30 cm, 75 microM i.d.), followed by enzyme (recombinant rat ecto-5'-NT) and subsequent injection of substrate solution. The reaction was initiated by the application of 1 kV voltage for 1 min. The voltage was turned off for 1 min and again turned on at a constant voltage of 15 kV to elute products (nucleosides) within 4 min using borate buffer (40 mM, pH 9.1). Thus, assays could be performed within 6 min, including enzymatic reaction, separation, and quantification of the formed nucleoside. The CE methods were used for measuring enzyme kinetics and for assaying inhibitors and substrates. In addition, the online assay was successfully applied to melanoma cell membrane preparations natively expressing the human ecto-5'-NT.

HPLC analysis of rosmarinic acid in feed enriched with aerial parts of Prunella vulgaris and its metabolites in pig plasma using dual-channel coulometric detection.

This paper describes a sensitive isocratic HPLC/ECD method developed for the determination of rosmarinic acid (RA) in plant material, animal feed, and pig plasma. The plasma sample preparation only includes protein precipitation and adjustment of the pH. The applicability of the method was tested on plasma samples of pigs that were exposed to a 91-day oral intake of RA via feed enriched by aerial parts of Prunella vulgaris. The plasma was directly analyzed using the method described as well as after enzymatic hydrolysis. When no hydrolysis step was included, RA and caffeic acid (CA) were quantified in the plasma. In hydrolyzed plasma samples, several other metabolites were determined, including dihydrocaffeic, ferulic, and dihydroferulic acid. The dual-channel coulometric detection employed, as an alternative to mass spectrometry, offers good selectivity and sensitivity owing to the electrochemical properties of the phenolic constituents.

The biological and chemical variability of yacon.

This paper focuses on the biological and chemical variability of four yacon (Smallanthus sonchifolius) accessions cultivated under field conditions. Significant variations in tuber shape, weight, content of oligofructans, as well as in leaf isozymes, phenolics, and relative DNA contents were found. Accessions 6 and 88 were the most productive (up to 3.01 and 3.74 kg/plant); accession 48 was the most balanced from the yield aspect in three vegetative periods. A significantly higher content of beta-(2-->1) oligofructans was noted in accessions 48 and 88 as compared to 6 and 60. No difference in sucrose, glucose, and fructose level was observed. Only accession 6 exhibited separate acid phosphatase and esterase isoforms. Accessions 6 and 60 had the highest content of phenolics, and accession 88 had the lowest relative DNA content. Large yacon intraspecific variation may be useful in future detailed research as a good background for breeding, growing, and utilization in industrial processing.