Redox-Neutral Decarboxylative Cross-Coupling of Oxamates with Aryl Bromides.

Dual nickel-photoredox-enabled direct synthesis of amides through cross-coupling of cesium oxamates with aryl bromides has been developed. This methodology's key advantages are mild reaction conditions, utilizing organic dye as a photocatalyst, employing readily available starting chemicals as coupling partners, and late-stage carbamoylation of pharmaceutically relevant molecules. DFT studies suggested that the nickel catalytic cycle proceeds via a radical addition pathway prior to the oxidative insertion.

Integrated Carbon Dioxide Capture and Conversion to Methanol Utilizing Tertiary Amines over a Heterogenous Cu/ZnO/Al2O3 Catalyst.

Increasing carbon dioxide emissions has sparked a growing interest in capturing these emissions at the source of their release. For such processes, amines can be used as carbon dioxide capture agents. Herein, CO2 was captured under ambient conditions using solutions of amines and polyamines in ethylene glycol. The captured solutions were then successfully hydrogenated to methanol under hydrogen pressure with a heterogeneous Cu/ZnO/Al2O3 industrial catalyst. An extensive amine scope found that tetramethyl-1,6-hexanediamine, with two tertiary amine sites, provided the highest methanol productivity. This reaction was then optimized to achieve up to 89% methanol yield under relatively mild conditions of 250 °C and 80 bar H2 pressure. The catalyst was shown to be recyclable over five reaction cycles.

Copper-Catalyzed Synthesis of Difluoromethyl Alkynes from Terminal and Silyl Acetylenes.

An efficient method for the direct C(sp)-H difluoromethylation of terminal alkynes and the desilylation-difluoromethylation of (trimethylsilyl)acetylenes is disclosed. The copper-catalyzed transformation provides access to a wide range of structurally diverse CF2H alkynes in good yields, utilizing a (difluoromethyl)zinc reagent and an organic oxidant. The difluoromethylation of important synthons and API's is showcased. The synthetic utility of these (difluoromethyl)alkynes is demonstrated by selected cycloaddition reactions. Additionally, a slight modification to the reaction conditions allowed the selective preparation of a 2-difluoromethylindole.

Visible-Light Photoredox-Catalyzed C(sp2)-H Difluoromethoxylation of (Hetero)arenes Utilizing a Shelf-Stable Pyridinium Reagent.

Difluoromethoxyarene moieties have been demonstrated to impart desirable physio-chemical properties to organic molecules. Presented herein is a shelf-stable radical difluoromethoxylating reagent that enables facile and direct C(sp2)-H difluoromethoxylation of (hetero)arenes under blue light photoredox catalysis. 4-Cyano-1-(difluoromethoxy)pyridin-1-ium trifluoromethanesulfonate is prepared in one simple step from the parent pyridine N-oxide. The current protocol tolerates a variety of synthetically and pharmacologically relevant functional groups. Applicability toward the late-stage functionalization of APIs and druglike molecules is also demonstrated.

Chemoselective N- and O-Difluoromethylation of 2-Pyridones, Isoquinolinones, and Quinolinones with TMSCF2Br.

An operationally simple protocol for direct N- and O-difluoromethylation of 2-pyridones, quinolinones, and isoquinolinones using commercially available TMSCF2Br is disclosed. The chemoselectivity is modulated by simple variations in temperature, solvent, and strength of the base. Diverse, synthetically relevant functional groups are tolerated, including functional groups that have reported reactivity with TMSCF2Br. Gram-scale reactions to prepare both N- and O-difluoromethyl compounds are included.

Sustainable treatment of paint industry wastewater: Current techniques and challenges.

Paint manufacturing industries produce wastewater containing high chemical oxygen demand and turbidity, besides organic matter, suspended solids, and heavy metals that cause enormous environmental damages. Safely treating this wastewater before being disposed to the natural water sources is essential for attaining the UN SDGs, particularly Goal 14: Life under water. Besides being efficient, wastewater treatment techniques must be sustainable - environmentally, economically, and ethically. While a few papers have reviewed specific treatment methods for certain pollutants, such as heavy metals, oils, and azo dyes from industrial wastewater, a comprehensive review of various treatment methods for all the pollutants of a particular industrial wastewater - paint industry - is lacking. This paper reviews the current treatment methods used for treating paint industry wastewater including the physicochemical, biological, and chemical treatment techniques. The physicochemical techniques produce large amount of sludge making it difficult for disposal while biological treatment techniques are difficult to maintain because of the uncertainties in the chemical compositions of the paint wastewater. Advanced oxidation processes are emerging as preferred methods among the chemical methods for reducing the toxicity of the various components of the paint wastewater with reduced sludge quantity. The review of various emerging techniques of paint industry wastewater treatments in this paper points to the need for paying greater attention to combining the oxidation and biological processes as they are emerging as sustainable methods for effective reduction of toxicity in paint wastewater while also reducing the sludge management challenges.

Tertiary Amine-Ethylene Glycol Based Tandem CO2 Capture and Hydrogenation to Methanol: Direct Utilization of Post-Combustion CO2.

Carbon dioxide capture using tertiary amines in ethylene glycol solvent was performed under ambient conditions. Subsequently, the CO2 captured as alkyl carbonate salts was successfully hydrogenated to methanol, in the presence of H2 gas and Ru-Macho-BH catalyst. A comprehensive series of tertiary amines were selected for the integrated capture and conversion process. While most of these amines were effective for CO2 capture, tetramethylethylenediamine (TMEDA) and tetramethylbutanediamine (TMBDA) provided the best CH3 OH yields. Deactivation of the base due to side reactions was significantly minimized and substantial base regeneration was observed. The proposed system was also highly efficient for CO2 capture from a gas mixture containing 10 % CO2 , as found in flue gases, followed by tandem conversion to CH3 OH. We postulate that such high boiling tertiary amine-glycol systems as dual capture and hydrogenation solvents are promising for the realization of a sustainable and carbon-neutral methanol economy in a scalable process.

Palladium-Catalyzed meta-C-H Allylation of Arenes: A Unique Combination of a Pyrimidine-Based Template and Hexafluoroisopropanol.

Controlling remote selectivity and delivering novel functionalities at distal positions in arenes are an important endeavor in contemporary organic synthesis. In this vein, template engineering and mechanistic understanding of new functionalization strategies are essential for enhancing the scope of such methods. Herein, meta-C-H allylation of arenes has been achieved with the aid of a palladium catalyst, pyrimidine-based auxiliary, and allyl phosphate. 1,1,1,3,3,3-Hexafluoroisopropanol (HFIP) was found as a critical solvent in this transformation. The role of HFIP throughout the catalytic cycle has been systematically studied. A broad substrate scope with phenethyl ether, phenol, benzylsulfonyl ester, phenethylsulfonyl ester, phenylacetic acid, hydrocinnamic acid, and 2-phenylbenzoic acid derivatives has been demonstrated. Interestingly, conformationally flexible arenes have also been selectively allylated at the meta-position using allyl phosphate. A combination of 1H NMR, 31P NMR, ESI-MS, kinetic experiments, and density functional theory (DFT) computations suggested that reaction proceeds through a ligand-assisted meta-C-H activation, allyl addition forming a Pd-π-allyl complex which is then followed by a turnover determining the C-C bond formation step leading to the meta-allylated product.

Protonation of CH3 N3 and CF3 N3 in Superacids: Isolation and Structural Characterization of Long-Lived Methyl- and Trifluoromethylamino Diazonium Ions.

The methylamino diazonium cations [CH3 N(H)N2 ]+ and [CF3 N(H)N2 ]+ were prepared as their low-temperature stable [AsF6 ]- salts by protonation of azidomethane and azidotrifluoromethane in superacidic systems. They were characterized by NMR and Raman spectroscopy. Unequivocal proof of the protonation site was obtained by the crystal structures of both salts, confirming the formation of alkylamino diazonium ions. The Lewis adducts CH3 N3 ⋅AsF5 and CF3 N3 ⋅AsF5 were also prepared and characterized by low-temperature NMR and Raman spectroscopy, and also by X-ray structure determination for CH3 N3 ⋅AsF5 . Electronic structure calculations were performed to provide additional insights. Attempted electrophilic amination of aromatics such as benzene and toluene with methyl- and trifluoromethylamino diazonium ions were unsuccessful.

Hydroxide Based Integrated CO2 Capture from Air and Conversion to Methanol.

The first example of an alkali hydroxide-based system for CO2 capture and conversion to methanol has been established. Bicarbonate and formate salts were hydrogenated to methanol with high yields in a solution of ethylene glycol. In an integrated one-pot system, CO2 was efficiently captured by an ethylene glycol solution of the base and subsequently hydrogenated to CH3OH at relatively mild temperatures (100-140 °C) using Ru-PNP catalysts. The produced methanol can be easily separated by distillation. Hydroxide base regeneration at low temperatures was observed for the first time. Finally, CO2 capture from ambient air and hydrogenation to CH3OH was demonstrated. We postulate that the high capture efficiency and stability of hydroxide bases make them superior to existing amine-based routes for direct air capture and conversion to methanol in a scalable process.

Aqueous Base Promoted O-Difluoromethylation of Carboxylic Acids with TMSCF2Br: Bench-Top Access to Difluoromethyl Esters.

A method for the O-difluoromethylation of carboxylic acids using commercially available TMSCF2Br is disclosed. The devised benchtop reaction system is air-stable and offers mild reaction conditions while using readily available reagents and solvents. The method is applicable to both aliphatic and aromatic carboxylic acids while demonstrating compatibility with a range of commonly encountered functional groups. The difluoromethyl esters of FDA approved drugs and pharmaceutically relevant molecules are also presented, demonstrating the potential for late-stage functionalization.

Integrated CO2 Capture and Conversion to Formate and Methanol: Connecting Two Threads.

The capture of CO2 from concentrated emission sources as well as from air represents a process of paramount importance in view of the increasing CO2 concentration in the atmosphere and its associated negative consequences on the biosphere. Once captured using various technologies, CO2 is desorbed and compressed for either storage (carbon capture and storage (CCS)) or production of value-added products (carbon capture and utilization (CCU)). Among various products that can be synthesized from CO2, methanol and formic acid are of high interest because they can be used directly as fuels or to generate H2 on demand at low temperatures (<100 °C), making them attractive hydrogen carriers (12.6 and 4.4 wt % H2 in methanol and formic acid, respectively). Methanol is already produced in huge quantities worldwide (100 billion liters annually) and is also a raw material for many chemicals and products, including formaldehyde, dimethyl ether, light olefins, and gasoline. The production of methanol through chemical recycling of captured CO2 is at the heart of the so-called "methanol economy" that we have proposed with the late Prof. George Olah at our Institute. Recently, there has been significant progress in the low-temperature synthesis of formic acid (or formate salts) and methanol from CO2 and H2 using homogeneous catalysts. Importantly, several studies have combined CO2 capture and hydrogenation, where captured CO2 (including from air) was directly utilized to produce formate and CH3OH without requiring energy intensive desorption and compression steps. This Account centers on that topic. A key feature in the combined CO2 capture and conversion studies reported to date for the synthesis of formic acid and methanol is the use of an amine or alkali-metal hydroxide base for capturing CO2, which can assist the homogeneous catalysts in the hydrogenation step. We start this Account by examining the combined processes where CO2 is captured in amine solutions and converted to alkylammonium formate salts. The effect of amine basicity on the reaction rate is discussed along with catalyst recycling schemes. Next, methanol synthesis by this combined process, with amines as capturing agents, is explored. We also examine the system developments for effective catalyst and amine recycling in this process. We next go through the effect of catalyst molecular structure on methanol production while elucidating the main deactivating pathway involving carbonylation of the metal center. The recent advances in first-row transition metal catalysts for this process are also mentioned. Subsequently, we discuss the capture of CO2 using hydroxide bases and conversion to formate salts. The regeneration of the hydroxide base (NaOH or KOH) at low temperatures (80 °C) in cation-conducting direct formate fuel cells is presented. Finally, we review the challenges in the yet unreported integrated CO2 capture by hydroxide bases and conversion to methanol process.

Photochemistry of 2-Nitroarenes: 2-Nitrophenyl-α-trifluoromethyl Carbinols as Synthons for Fluoroorganics.

Facile synthesis of a new series of 2,2'-bis(trifluoroacetyl) azoxybenzene derivatives and trifluoromethylated benzo[c]isoxazoline systems, along with trifluoroacetyl nitrosobenzene derivatives was achieved by solvent controlled photolysis of appropriate 2-nitrobenzyl alcohols. Corresponding photoactive 2-nitrobenzyl chromophore plays a distinct role in this photosynthetic process, while, quite unprecedented, pertinent fluoromethyl substitution leads to high value fluoromethylated products, whose direct access is not feasible by common synthetic protocols. The significance of fluorine and fluoroalkyl substitution and its prominent biological effects makes this new photochemical approach an important discovery in synthetic methodology. Plausible mechanistic pathways involved in the formation of the products during steady-state photolysis are further established by picosecond laser flash photolysis experiments.

Studies on Long-Lived (Pentafluorosulfanyl)phenyl-Substituted Carbocations.

A variety of long-lived carbocations containing the p-(pentafluorosulfanyl)phenyl and m-(pentafluorosulfanyl)phenyl groups have been characterized by low-temperature NMR spectroscopy. In the case of potential nonclassical carbocations substituted with the p-(pentafluorosulfanyl)phenyl substituent, deviations from linearity when the Hammett parameter (σC+) is plotted versus 13C NMR shifts of the carbocationic center were observed. Plotting the experimentally derived 13C NMR shifts versus σC+ or σ+ of classical 4-phenyl-X substituted carbocations also provides a means to accurately back-calculate the σ+ and σC+ parameters of the -SF5 substituent.

Catalytic Homogeneous Hydrogenation of CO to Methanol via Formamide.

A novel amine-assisted route for low temperature homogeneous hydrogenation of CO to methanol is described. The reaction proceeds through the formation of formamide intermediates. The first amine carbonylation part is catalyzed by K3PO4. Subsequently, the formamides are hydrogenated in situ to methanol in the presence of a commercially available ruthenium pincer complex as a catalyst. Under optimized reaction conditions, CO (up to 10 bar) was directly converted to methanol in high yield and selectivity in the presence of H2 (70 bar) and diethylenetriamine. A maximum TON of 539 was achieved using the catalyst Ru-Macho-BH. The high yield, selectivity, and TONs obtained for methanol production at low reaction temperature (145 °C) could make this process an attractive alternative over the traditional high temperature heterogeneous catalysis.

Catalyst-Free Regioselective N2 Arylation of 1,2,3-Triazoles Using Diaryl Iodonium Salts.

The widespread application of 1,2,3-triazoles in pharmaceuticals has resulted in substantial interest toward developing efficient postmodification methods. Whereas there are many postmodification methods available to obtain N1-substituted 1,2,3-triazoles, developing a selective and convenient protocol to synthesize N2-aryl-1,2,3-triazoles has been challenging. We report a catalyst-free and regioselective method to access N2-aryl-1,2,3-triazoles in good to excellent yields (66-97%). This scalable postmodification protocol is effective for a wide range of substrates.

Cyclobutane dication, (CH2)4 2+: a model for a two-electron four-center (2e-4c) Woodward-Hoffmann frozen transition state.

The structures of the elusive cyclobutane dication, (CH2)4 2+, were investigated at the MP2/cc-pVTZ and CCSD(T)/cc-pVTZ levels. Calculations show that the two-electron four-center (2e-4c) bonded structure 1 involving four carbon atoms is a minimum. The structure contains formally two tetracoordinate and two pentacoordinate carbons. The non-classical σ-delocalized structure can be considered as a prototype for a 2e-4c Woodward-Hoffmann frozen transition state. The planar rectangular shaped structure 2 with a 2e-4c bond was found not to be a minimum.

Direct Access to Acyl Fluorides from Carboxylic Acids Using a Phosphine/Fluoride Deoxyfluorination Reagent System.

A fast and simple method for deoxyfluorination of carboxylic acids is presented. The protocol employs commodity chemicals (PPh3, NBS, fluoride), affording products in excellent yields under mild conditions. Acyloxyphosphonium ion, the key reaction intermediate, was identified by NMR spectroscopic methods. Brønsted acidic conditions are essential for efficient C-F bond formation. The protocol displays scalability, high functional group tolerance, chemoselectivity, and easy purification of products. Deoxyfluorination of active pharmaceutical ingredients was established.

Combined CO2 Capture and Hydrogenation to Methanol: Amine Immobilization Enables Easy Recycling of Active Elements.

Amines were immobilized onto solid supports and employed for tandem CO2 capture and conversion to CH3 OH using homogeneous hydrogenation catalysts. The hydrogenation proceeded through the formation of formamide intermediates. After hydrogenation, the immobilized amines were easily filtered and collected to be reused. The catalyst and methanol were recovered from the filtrate. Covalently-attached (to polymer support or silica) amine functionalities displayed the highest recycling potential with almost no leaching under the hydrogenation reaction conditions. Using polyethylenimine grafted onto a solid-silica support, the catalyst and amine were successfully recycled, and CO2 (either pure or from the air) was efficiently captured and converted to CH3 OH over multiple cycles.