A Digital Model to Simulate Effects of Bone Architecture Variations on Texture at Spatial Resolutions of CT, HR-pQCT, and µCT Scanners.

The quantification of changes in the trabecular bone structure induced by musculoskeletal diseases like osteoarthritis, osteoporosis, rheumatoid arthritis, and others by means of a texture analysis is a valuable tool which is expected to improve the diagnosis and monitoring of a disease. The reaction of texture parameters on different alterations in the architecture of the fine trabecular network and inherent imaging factors such as spatial resolution or image noise has to be understood in detail to ensure an accurate and reliable determination of the current bone state. Therefore, a digital model for the quantitative analysis of cancellous bone structures was developed. Five parameters were used for texture analysis: entropy, global and local inhomogeneity, local anisotropy, and variogram slope. Various generic structural changes of cancellous bone were simulated for different spatial resolutions. Additionally, the dependence of the texture parameters on tissue mineralization and noise was investigated. The present work explains changes in texture parameter outcomes based on structural changes originating from structure modifications and reveals that a texture analysis could provide useful information for a trabecular bone analysis even at resolutions below the dimensions of single trabeculae.

Bone marrow lesions identified by MRI in knee osteoarthritis are associated with locally increased bone mineral density measured by QCT.

OBJECTIVE: Bone marrow lesions (BMLs) in the knee are associated with pain and compartment-specific joint space narrowing. However, the correlation of BMLs with bone mineral density (BMD) has rarely been investigated. The aim of the present study was to examine whether BMD in BMLs is altered compared to the surrounding bone. DESIGN: Thirty-four BMLs detected in osteoarthritis (OA) knees (KL grade 2 and 3) of 26 patients were investigated. A 3D-segmentation was used to determine BML volumes of interest (VOI) and their surrounding bone in MR images. These VOIs were registered to corresponding single-energy QCT images and a BMD analysis was performed. The same VOIs were transferred to control datasets (19 OA patients without BMLs) by an elastic registration, where the BMD analysis was repeated. To account for the dependence of bone marrow composition on BMD measures derived using single-energy QCT, simulations were performed to evaluate how changing fat-water compositions likely occurring with BML development may influence BMD measures and observed BMD differences between patients with and without BMLs. The association between loading in the knee and the occurrence of BMLs was investigated by medial to lateral (M:L) BMD ratios. RESULTS: BMD was significantly increased at BML locations, even with a fat-to-water conversion rate of 39%. The M:L BMD ratio was significantly increased in bones with medial BMLs. CONCLUSIONS: BMD was examined exactly at BML locations and surrounding bone using highly accurate segmentation and registration methods. BMD was significantly increased at BML locations (P < 0.05).

Effect of block-periodized exercise training on bone and coronary heart disease risk factors in early post-menopausal women: a randomized controlled study.

The purpose of this 12 month randomized exercise intervention was to determine the effect of a block-periodized multipurpose exercise program on bone mineral density (BMD) and parameters of the metabolic syndrome (MetS) in early post-menopausal women. Eighty-five subjects (52.3 ± 2.4 years) living in the area of Erlangen (Germany) were randomly assigned into an exercise (EG, n=43) or a wellness-control group (CG: n=42). The EG performed a periodized multipurpose exercise program with 4-6-week blocks of high-intensity bone-specific exercise intermitted by 10-12 weeks of exercise dedicated to increase endurance and reduce cardiac and metabolic risk factors. The CG performed a low-volume/low-intensity "wellness" program to increase well-being. After 12 months, significant exercise effects were observed for the lumbar spine (LS) BMD as assessed by quantitative computed tomography [total BMD (EG: -0.3 ± 2.1% vs CG: -2.1 ± 2.2%, P=0.015); trabecular BMD (EG: -0.7 ± 3.4% vs CG: -4.7 ± 4.9%, P=0.001) and dual-energy x-ray absorptiometry (DXA) (EG: -0.1 ± 2.2% vs CG: -2.0 ± 2.0%, P=0.002)]. However, no significant effects were observed for total hip BMD as assessed by DXA (P=0.152). Although all MetS parameters were favorably affected among the EG, only the effect for waist circumference was significant. In summary, short periods of bone-specific intervention embedded in longer periods of exercises dedicated to improve cardiovascular and metabolic risk factors positively affected BMD at the LS.

[Current strategies for dosage reduction in computed tomography]. / Aktuelle Strategien zur Dosisreduktion in der Computertomographie.

The potential risks of radiation exposure associated with computed tomography (CT) imaging are reason for ongoing concern for both medical staff and patients. Radiation dose reduction is, according to the as low as reasonably achievable principle, an important issue in clinical routine, research and development. The complex interaction of preparation, examination and post-processing provides a high potential for optimization on the one hand but on the other a high risk for errors. The radiologist is responsible for the quality of the CT examination which requires specialized and up-to-date knowledge. Most of the techniques for radiation dose reduction are independent of the system and manufacturer. The basic principle should be radiation dose optimization without loss of diagnostic image quality rather than just reduction.

An integrated segmentation and analysis approach for QCT of the knee to determine subchondral bone mineral density and texture.

We have developed a new integrated approach for quantitative computed tomography of the knee in order to quantify bone mineral density (BMD) and subchondral bone structure. The present framework consists of image acquisition and reconstruction, 3-D segmentation, determination of anatomic coordinate systems, and reproducible positioning of analysis volumes of interest (VOI). Novel segmentation algorithms were developed to identify growth plates of the tibia and femur and the joint space with high reproducibility. Five different VOIs with varying distance to the articular surface are defined in the epiphysis. Each VOI is further subdivided into a medial and a lateral part. In each VOI, BMD is determined. In addition, a texture analysis is performed on a high-resolution computed tomography (CT) reconstruction of the same CT scan in order to quantify subchondral bone structure. Local and global homogeneity, as well as local and global anisotropy were measured in all VOIs. Overall short-term precision of the technique was evaluated using double measurements of 20 osteoarthritic cadaveric human knees. Precision errors for volume were about 2-3% in the femur and 3-5% in the tibia. Precision errors for BMD were about 1-2% lower. Homogeneity parameters showed precision errors up to about 2% and anisotropy parameters up to about 4%.

Effect of whole-body vibration on neuromuscular performance and body composition for females 65 years and older: a randomized-controlled trial.

We examined whether the effect of multipurpose exercise can be enhanced by whole-body vibration (WBV). One hundred and fifty-one post-menopausal women (68.5 ± 3.1 years) were randomly assigned to three groups: (1) a training group (TG); (2) training including vibration (VTG); and (3) a wellness control group (CG). TG and VTG performed the same training program twice weekly (60 min), consisting of aerobic and strength exercises, with the only difference that leg strength exercises (15 min) were performed with (VTG) or without (TG) vibration. CG performed a low-intensity "wellness" program. At baseline and after 18 months, body composition was determined using dual-X-ray-absorptiometry. Maximum isometric strength was determined for the legs and the trunk region. Leg power was measured by countermovement jumps using a force-measuring plate. In the TG lean body mass, total body fat, and abdominal fat were favorably affected, but no additive effects were generated by the vibration stimulus. However, concerning muscle strength and power, there was a tendency in favor of the VTG. Only vibration training resulted in a significant increase of leg and trunk flexion strength compared with CG. In summary, WBV embedded in a multipurpose exercise program showed minor additive effects on body composition and neuromuscular performance.

Volume-of-interest imaging of the inner ear in a human temporal bone specimen using a robot- driven C-arm flat panel detector CT system.

VOI imaging can provide higher image quality at a reduced dose for a subregion. In this study with a robot-driven C-arm FDCT system, the goals were proof of feasibility for inner ear imaging, higher flexibility during data acquisition, and easier processing during reconstruction. First a low-dose OV scan was acquired allowing an orientation and enabling the selection of the VOI. The C-arm was then moved by the robotic system without a need for patient movement and the VOI was scanned with adapted parameters. Uncompromised artifact-free image quality was achieved by the 2-scan approach and the dose was reduced by 80%-90% in comparison with conventional MSCT and FPCT scans.

Exercise and fractures in postmenopausal women: 12-year results of the Erlangen Fitness and Osteoporosis Prevention Study (EFOPS).

UNLABELLED: This trial is the first exercise study that focuses on fracture incidence as a primary study endpoint. Although we marginally failed to determine significant effects on "overall" fracture risk (p = .074) or rate ratio (p = .095), our findings further increased the evidence that exercise relevantly prevents fractures in the elderly. INTRODUCTION: The purpose of this study is to determine the effect of strictly supervised long-term exercise training on "overall" fracture incidence and bone mineral density (BMD) in postmenopausal osteopenic women. METHODS: Eighty-five early postmenopausal (1-8 years), osteopenic women living in the area of Erlangen-Nuremberg, Germany without any medication or diseases affecting bone metabolism were assessed after 12 years of supervised exercise (EG) or unvarying lifestyle (control, CG). Exercisers were encouraged to perform two group sessions/week and two home training sessions/week. Calcium and vitamin D supplementation was provided for both groups. "Overall" fractures were determined by questionnaires and structured interviews. The BMD was assessed at lumbar spine and proximal femur by dual-energy X-ray absorptiometry. RESULTS: "Overall" fracture risk ratio in the EG was 0.32 (95% confidence interval (CI), 0.08 to 1.05; p = .074), and the rate ratio for "overall" fractures was 0.38 (95% CI, 0.11 to 1.15; p = .095). BMD changes at lumbar spine (EG, -0.8%; 95% CI, 0.8% to -2.7% vs. CG, -4.0%; 95% CI, -2.4% to -5.7%; p = .011) and femoral neck (EG, -3.7%; 95% CI, -2.4% to -5.0% vs. CG, -6.7%; 95% CI, -5.3% to -8.2%; p = .003) significantly differed between both groups. CONCLUSION: Although we marginally failed to determine significant effects on overall fracture risk or rate ratio, our study increased the body of evidence for the fracture prevention efficiency of exercise programs, with special regard on bone strength (as assessed by bone mineral density measurement). Future studies should focus on subjects more prone to fractures to generate enough statistical power to clearly determine this issue.

Effects of whole body vibration on bone mineral density and falls: results of the randomized controlled ELVIS study with postmenopausal women.

UNLABELLED: We determined whether the effect of exercise on bone mineral density (BMD) and falls can be enhanced by whole body vibration (WBV). In summary, the multi-purpose exercise training was effective to increase lumbar BMD but added WBV did not enhance this effect. However, falls were lowest in the exercise program combined with WBV. INTRODUCTION: WBV is a new approach to reduce the risk of osteoporotic fractures. In the "Erlangen Longitudinal Vibration Study" (ELVIS), we investigated whether WBV enhances the effect of multifunctional exercise on BMD and falls. METHODS: One hundred fifty-one postmenopausal women (68.5 ± 3.1 years) were randomly assigned to a: (1) conventional training group (TG); (2) conventional training group including vibration (TGV); and (3) wellness control group (CG). TG conducted an exercise program consisting of 20 min dancing aerobics, 5 min balance training, 20 min functional gymnastics, and 15 min dynamic leg-strength training on vibration plates (without vibration) twice a week. TGV performed an identical exercise regimen with vibration (25-35 Hz) during the leg-strengthening sequence. CG performed a low-intensity wellness program. BMD was measured at the hip and lumbar spine at baseline and follow-up using the DXA method. Falls were recorded daily via the calendar method. RESULTS: After 18 months, an increase in BMD at the lumbar spine was observed in both training groups (TGV: +1.5% vs. TG: +2.1%). The difference between the TG and the CG (1.7%) was significant. At the hip no changes were determined in either group. The fall frequency was significantly lower in TGV (0.7 falls/person) compared with CG (1.5), whereas the difference between TG (0.96) and CG was not significant. CONCLUSIONS: A multifunctional training program had a positive impact on lumbar BMD. The application of vibration did not enhance these effects. However, only the training including WBV affected the number of falls significantly.

Development, implementation and evaluation of a dedicated metal artefact reduction method for interventional flat-detector CT.

The purpose of this study was to develop, implement and evaluate a dedicated metal artefact reduction (MAR) method for flat-detector CT (FDCT). The algorithm uses the multidimensional raw data space to calculate surrogate attenuation values for the original metal traces in the raw data domain. The metal traces are detected automatically by a three-dimensional, threshold-based segmentation algorithm in an initial reconstructed image volume, based on twofold histogram information for calculating appropriate metal thresholds. These thresholds are combined with constrained morphological operations in the projection domain. A subsequent reconstruction of the modified raw data yields an artefact-reduced image volume that is further processed by a combining procedure that reinserts the missing metal information. For image quality assessment, measurements on semi-anthropomorphic phantoms containing metallic inserts were evaluated in terms of CT value accuracy, image noise and spatial resolution before and after correction. Measurements of the same phantoms without prostheses were used as ground truth for comparison. Cadaver measurements were performed on complex and realistic cases and to determine the influences of our correction method on the tissue surrounding the prostheses. The results showed a significant reduction of metal-induced streak artefacts (CT value differences were reduced to below 22 HU and image noise reduction of up to 200%). The cadaver measurements showed excellent results for imaging areas close to the implant and exceptional artefact suppression in these areas. Furthermore, measurements in the knee and spine regions confirmed the superiority of our method to standard one-dimensional, linear interpolation.

The influence of the heel effect in cone-beam computed tomography: artifacts in standard and novel geometries and their correction.

For decades, the heel effect has been known to cause an angular dependence of the emitted spectrum of an x-ray tube. In radiography, artifacts were observed and attributed to the heel effect. However, no problems due to the heel effect were discerned in multi-slice computed tomography (MSCT) so far. With flat-detector CT (FDCT), involving larger cone angles and different system geometries, the heel effect might cause new artifacts. These artifacts were analyzed in this paper for system geometries different from the ones widely used nowadays. Simulations and measurements were performed. Simulations included symmetric as well as asymmetric detector layouts and different x-ray tube orientations with respect to the detector plane. The measurements were performed on a micro-CT system in an asymmetric detector layout. Furthermore, an analytical correction scheme is proposed to overcome heel effect artifacts. It was shown that the type of artifact greatly depends on the orientation of the x-ray tube and also on the type of detector alignment (i.e. symmetric or different types of asymmetric alignment). Certain combinations exhibited almost no significant artifact while others greatly influenced the quality of the reconstructed images. The proposed correction scheme showed good results that were further improved when also applying a scatter correction. When designing CT systems, care should be taken when placing the tube and the detector. Orientation of the x-ray tube like in most MSCT systems seems advisable in asymmetric detector layouts. However, a different type of tube orientation can be overcome with suitable correction schemes.

Flat detector CT in the evaluation of brain parenchyma, intracranial vasculature, and cerebral blood volume: a pilot study in patients with acute symptoms of cerebral ischemia.

BACKGROUND AND PURPOSE: The viability of both brain parenchyma and vascular anatomy is important in estimating the risk and potential benefit of revascularization in patients with acute cerebral ischemia. We tested the hypothesis that when used in conjunction with IV contrast, FD-CT imaging would provide both anatomic and physiologic information that would correlate well with that obtained by using standard multisection CT techniques. MATERIALS AND METHODS: Imaging of brain parenchyma (FD-CT), cerebral vasculature (FD-CTA), and cerebral blood volume (FD-CBV) was performed in 10 patients. All patients also underwent conventional multisection CT, CTA, CTP (including CBV, CTP-CBV), and conventional catheter angiography. Correlation of the corresponding images was performed by 2 experienced neuroradiologists. RESULTS: There was good correlation of the CBV color maps and absolute values between FD-CBV and CTP-CBV (correlation coefficient, 0.72; P < .001). The Bland-Altman test showed a mean difference of CBV values between FD-CT and CTP-CBV of 0.04 ± 0.55 mL/100 mL. All vascular lesions identified with standard CTA were also visualized with FD-CTA. Visualization of brain parenchyma by using FD-CT was poor compared with that obtained by using standard CT. CONCLUSIONS: Both imaging of the cerebral vasculature and measurements of CBV by using FD-CT are feasible. The resulting vascular images and CBV measurements compared well with ones made by using standard CT techniques. The ability to measure CBV and also visualize cerebral vasculature in the angiography suite may offer significant advantages in the management of patients. FD-CT is not yet equivalent to CT for imaging of brain parenchyma.

Metal artifact reduction for clipping and coiling in interventional C-arm CT.

BACKGROUND AND PURPOSE: Metallic implants induce massive artifacts in CT images which deteriorate image quality and often superimpose structures of interest. The purpose of this study was to apply and evaluate a dedicated MAR method for neuroradiologic intracranial clips and detachable platinum coiling events. We here report the first clinical results for MAR in FDCT. MATERIALS AND METHODS: FDCT volume scans of several patients treated with endovascular coiling or intracranial clipping were corrected by using a dedicated FDCT MAR correction algorithm combined with an edge-preserving attenuation-normalization method in the projection space. Corrected and uncorrected images were compared by 2 experienced radiologists and evaluated for several image-quality features. RESULTS: After application of our algorithm, implant delineation and visibility were highly improved. CT values compared with values in metal artifact-unaffected areas showed good agreement (average correction of 1300 HU). Image noise was reduced overall by 27%. Intracranial hemorrhage in the direct surroundings of the implanted coil or clip material was displayed without worrisome metal artifacts, and our algorithm even allowed diagnosis in areas where extensive information losses were seen. The high spatial resolution provided by FDCT imaging was well preserved. CONCLUSIONS: Our MAR method provided metal artifact-reduced images in every studied case. It reduced image noise and corrected CT values to levels comparable with images measured without metallic implants. An overall improvement of brain tissue modeling and implant visibility was achieved. MAR in neuroradiologic FDCT imaging is a promising step forward for better image quality and diagnosis in the presence of metallic implants.

[Effect of whole body vibration on the neuromuscular performance of females 65 years and older. One-year results of the controlled randomized ELVIS study]. / Effekte von Ganzkörpervibrationen auf die neuromuskuläre Leistungsfähigkeit von Frauen über dem 65. Lebensjahr. Einjahresergebnisse der kontrollierten randomisierten ELVIS-Studie.

Sarcopenia is linked to an increased risk of morbidity and mortality in the aging. Whole body vibration (WBV) exercises are currently discussed as a "gentle" alternative to conventional exercises to improve muscle mass. The present study scrutinized whether a multipurpose (exercise) training program using WBV can improve muscle mass and neuromuscular capacity, while lowering fall risk. A total of 151 postmenopausal women were randomized into three groups: exercise group (TG), exercise group with vibration (VTG), and fitness control group (CG). The TG group participated in an exercise program including leg strengthening training twice a week over 12 months, while the VTG carried out an identical program with the leg exercises performed under WBV. Despite a positive trend regarding lean body mass in the two exercise groups, there was no difference between groups. Both exercise groups showed a significant increase (vs. KG) in trunk strength. An improvement in both exercise groups was also measured with respect to leg strength, but only the VTG showed significant differences compared to the CG. In addition, a significant lower risk of falls compared with the CG was evident only in VTG.

[Basic principles of flat detector computed tomography (FD-CT)]. / Grundlagen der Flachdetektor-CT (FD-CT).

Flat detectors (FDs) have been developed for use in radiography and fluoroscopy to replace standard X-ray film, film-screen combinations and image intensifiers (II). In comparison to X-ray film and II, FD technology offers higher dynamic range, dose reduction, fast digital readout and the possibility for dynamic acquisitions of image series, yet keeping to a compact design. It appeared logical to employ FD designs also for computed tomography (CT) imaging. FDCT has meanwhile become widely accepted for interventional and intra-operative imaging using C-arm systems. Additionally, the introduction of FD technology was a milestone for soft-tissue CT imaging in the interventional suite which was not possible with II systems in the past. This review focuses on technical and performance issues of FD technology and its wide range of applications for CT imaging. FDCT is not aimed at challenging standard clinical CT as regards to the typical diagnostic examinations, but it has already proven unique for a number of dedicated CT applications offering distinct practical advantages, above all the availability of immediate CT imaging during an intervention.

[Effect of whole body vibration exercise on osteoporotic risk factors]. / Effekte eines Ganzkörpervibrationstrainings auf Parameter des Frakturrisikos.

BACKGROUND AND OBJECTIVE: Whole body vibration (WBV) training is a new approach which is currently discussed in the context of reducing the risk of osteoporotic fractures. The study was undertaken to determine the effect of one-year WBV exercise on bone mineral density (BMD) and the number of falls. METHODS: 151 postmenopausal women (68.5 +/- 3.1 years) were randomly assigned to three groups: (1) conventional (multifunctional) training (TG); (2) multifunctional training including WBV (VTG); (3) wellness-control group (CG). The training groups performed multifunctional training twice weekly (60 min; dancing aerobics, balance training, functional strength training). In the last 15 min of each session, leg strength exercises on vibration platforms were performed. The plates were switched on only in the VTG. The CG performed a low intensity gymnastic and relaxation programme (4 x 10 sessions of 60 min). BMD was measured at the hip and lumbar spine at baseline and after 12 months with the DXA method. Falls were recorded daily with the calendar method in a fall log. RESULTS: An increase in BMD at the lumbar spine was measured after one year in both training groups (VTG: + 1.17 +/- 2.4 % vs. TG: + 1.73 +/- 2.4 %). The difference between the TG and the CG was significant (p < .05). Regarding the hip region a loss was noted in the CG (- 0.9 +/- 2.5), whereas the BMD stayed stable in the training groups (TG: - 0.3 %; VTG: + 0.1 %). The fall rate was significantly lower in VTG compared to CG (0.43 falls/person/year (VTG) vs. 1.14 (CG). CONCLUSION: The multifunctional training resulted in a gain of BMD at the lumbar spine. Vibration training did not enhance the effect on bone but significantly reduced falls.

Reduction of dose to the female breast as a result of spectral optimisation for high-contrast thoracic CT imaging: a phantom study.

Various approaches to reduce dose to the female breast in thoracic CT have been investigated. We evaluated the potential for reduction of dose to the breast by optimal choice of the X-ray spectra. The effect of X-ray energy variation on dose to the female breast in thoracic CT was examined by simulations and measurements of image contrast, image noise and radiation dose. A standard thorax phantom was used with various extension rings and breasts added and the following contrast inserts: iodine, calcium hydroxyapatite and a pure soft-tissue density difference. Three-dimensional dose distributions were determined by a validated Monte Carlo tool. The contrast-to-noise ratio per unit dose (CNRD) was determined for tube voltages of 40-200 kV by simulations and for 60-140 kV by measurements on a clinical CT scanner. CNRD curves did not show significant variations in soft-tissue density contrast, but considerable optimisation potential for iodine and skeletal imaging at reduced energies. Exact values depend on the patient's cross-section and X-ray spectrum. For example, reducing the tube voltage from 120 kV to 80 kV on the scanner reduced dose to the female breast typically by 50% without deterioration of the CNR. This method exceeds the dose reduction potential of other measures. We conclude that tube voltages in thoracic CT can be lowered for contrast medium and skeletal imaging without affecting the CNR but with a significant decrease in dose to the female breast.

Reduction of motion artefacts in non-gated dual-energy radiography.

The objective of this work was to reduce motion artefacts in non-gated dual-energy subtraction radiography whilst preserving the contrast-to-noise ratio (CNR) in regions with low motion. Dual-energy radiography provides material-selective information (soft-tissue and bone images) that may be used for improved detection of calcifications in lung nodules. The weighted logarithmic dual-energy subtraction of thoracic images performed without electrocardiogram gating results in motion-induced artefacts. The low-energy image was acquired at the usual dose setting at 60 kV. To obtain the high-energy (120 kV) information, a series of consecutive images at a time interval of 30 ms were made. The series integral dose was equivalent to the dose of a single conventional high-energy image. A motion-free merging technique was introduced that combines standard images yielding low image noise with phase-selective images yielding motion artefact-free image regions which are used for dual-energy subtraction. Evaluations of the method were performed with simulations and measurements using a C-arm system (Axiom Artis; Siemens AG, Germany) equipped with a flat detector of 40 x 30 cm(2). The merging approach conserved standard image noise levels and the CNR in areas without cardiac motion, whereas image noise in pericardial lung regions and in the heart was increased compared with standard images. Motion artefacts in the heart and in the lung areas close to the heart are significantly reduced in the material-selective images when compared with a standard non-gated subtraction.

Simultaneous misalignment correction for approximate circular cone-beam computed tomography.

Currently, CT scanning is often performed using flat detectors which are mounted on C-arm units or dedicated gantries as in radiation therapy or micro CT. For perspective cone-beam backprojection of the Feldkamp type (FDK) the geometry of an approximately circular scan trajectory has to be available for reconstruction. If the system or the scan geometry is afflicted with geometrical instabilities, referred to as misalignment, a non-perfect approximate circular scan is the case. Reconstructing a misaligned scan without knowledge of the true trajectory results in severe artefacts in the CT images. Unlike current methods which use a pre-scan calibration of the geometry for defined scan protocols and calibration phantoms, we propose a real-time iterative restoration of reconstruction geometry by means of entropy minimization. Entropy minimization is performed combining a simplex algorithm for multi-parameter optimization and iterative graphics card (GPU)-based FDK-reconstructions. Images reconstructed with the misaligned geometry were used as an input for the entropy minimization algorithm. A simplex algorithm changes the geometrical parameters of the source and detector with respect to the reduction of entropy. In order to reduce the size of the high-dimensional space required for minimization, the trajectory was described by only eight fix points. A virtual trajectory is generated for each iteration using a least-mean-squares algorithm to calculate an approximately circular path including these points. Entropy was minimal for the ideal dataset, whereas strong misalignment resulted in a higher entropy value. For the datasets used in this study, the simplex algorithm required 64-200 iterations to achieve an entropy value equivalent to the ideal dataset, depending on the grade of misalignment using random initialization conditions. The use of the GPU reduced the time per iteration as compared to a quad core CPU-based backprojection by a factor of 10 resulting in a total of 15-20 ms per iteration, and thus providing an online geometry restoration after a total computation time of approximately 1-3 s, depending on the number of iterations. The proposed method provides accurate geometry restoration for approximately circular scans and eliminates the need for an elaborate off-line calibration for each scan. If a priori information about the trajectory is used to initialize the simplex algorithm, it is expected that the entropy minimization will converge significantly faster.

Neuroradiologic applications with routine C-arm flat panel detector CT: evaluation of patient dose measurements.

BACKGROUND AND PURPOSE: Since the introduction of flat panel detector-equipped C-arms, the use of flat panel detector CT (FPCT) in the neuroradiologic angiography suite has become more frequent. This examination implicates its own specific radiation exposure. We used the CT dose index (CTDI) concept and adapted it to the special FPCT geometry to provide a consistent comparison with multisection head CT (cCT). MATERIALS AND METHODS: Exposure data obtained for routine scanning during a period of 1 year were used to assess a specific dose of a total of 217 rotational scans performed in 105 patients. One hundred seventy-two scans were 3D digital subtraction angiography (DSA) scans. There were 45 scans that were performed to achieve high-quality, soft-tissue resolution. Dose measurements in cylindrical polymethylmethacrylate (PMMA) phantoms were used to determine the CTDI value and to compare it with the reference values for cCT. In addition, the dose-area product (DAP) was registered and correlated with the CTDI and corresponding dose-length product (DLP) values. Exposure data and dose values were compared with cCT. RESULTS: Mean-weighted CTDI value of 3D-DSA was approximately 9 mGy per scan. High-quality, soft-tissue resolution FPCT scans, comparable with cCT, revealed a mean dose value of 75 mGy (reference value for cCT, CTDI(w) approximately 60 mGy). CONCLUSION: The high-speed scans used for 3D-DSA revealed a significantly lower CTDI(w) and DLP compared with clinical CT. The high-quality FPCT protocol resulted in a higher dose and should therefore be limited to acute cases, when patient transfer to a CT scanner is considered to be a disadvantage for patient management.