RESUMEN
The goal of this study was to evaluate the effects of different core and veneer thicknesses on the translucency (T%), average light transmittance (T), translucency parameter (TP), contrast ratio (CR), and spectral reflectance (R) of glass-ceramics using a computer-aided design/computer-aided manufacturing (CAD-CAM) process. In all, 42 specimens (11mm × 11mm) were prepared and divided into six groups (n = 7 for each group). Core materials (IPS e.max CAD; IPS Empress CAD, LT A2 shade) of different thicknesses (0.8, 1.0, and 1.2mm) were fabricated. Each veneer material (thicknesses of 0.7, 0.5, and 0.3mm) was combined with its compatible core ceramic. Each core material was overlapped with its corresponding veneer material to obtain a 1.5-mm thickness by using three different combinations: (0.8+0.7), (1.0+0.5), and (1.2+0.3) mm. A spectrophotometer and color data software were used to measure the T%, T, TP, CR, and R values of each ceramic. The results were statistically analyzed using two-way analysis of variables (ANOVA) and regression analysis (p<0.05). Two-way ANOVA revealed that T%, T, TP, and CR were significantly influenced by the different thicknesses of the core-veneer combinations (p<0.001). At a certain thickness, as the veneer thickness increased and core thickness decreased, T and T% all increased. Regression analysis of the ceramic materials indicated a reduction in T and T% for certain core-veneer combinations. Analysis also revealed that T% and T were all affected by different core-veneer combinations. The T% value was 74.31 for the EM group and 72.81 for the EP group when the thickness of the core was 1.2 mm and the veneer was 0.3 mm. The R value of EM2 was lower than EM1 and EM3. In conclusion, the optical properties were influenced by different core-veneer combinations.
Asunto(s)
Cerámica/química , Porcelana Dental/química , Coronas con Frente Estético , HumanosRESUMEN
STATEMENT OF PROBLEM: The color of dental ceramics is important for achieving successful esthetic restorations. However, insufficient studies are available of the color of recently introduced computer-aided design-computer-aided manufacturing (CAD-CAM) lithium disilicate ceramics as functions of the core and veneer thicknesses. PURPOSE: The purpose of this in vitro study was to evaluate the effects of the thickness of different core and veneer thicknesses on the color of CAD-CAM lithium disilicate ceramics. MATERIAL AND METHODS: A total of 42 specimens from 2 groups of 7 ceramic cores at 3 thicknesses (0.8, 1.0, and 1.2 mm) were fabricated. The veneer was fabricated at 3 thicknesses (0.3, 0.5, and 0.7 mm). The group name was based on the name of the ceramic core (IPS e.max CAD; lithium disilicate [LD], IPS Empress CAD; leucite-reinforced glass-ceramic [LR]), and the associated number was determined by the combined thicknesses of the core and the veneer: 1=0.8+0.7; 2=1.0+0.5; and 3=1.2+0.3. The color coordinates and the color differences were calculated using a spectrophotometer. The color difference was analyzed using the CIEDE2000 chrominance and the acceptability threshold. Two-way ANOVA was used to identify the color difference based on the core/veneer thicknesses, and the Tukey honest significant differences and Games-Howell tests were conducted to verify the ΔE00 differences of the group (α=.05). In addition, regression analysis was carried out to estimate the causal relationship between the independent variables and the chrominance. RESULTS: At a certain thickness, the color differences of LD1, LR1, and LR2 were not clinically acceptable based on the thicknesses of the core and the veneer. Results of 2-way ANOVA demonstrated that the different thicknesses of core/veneer combination significantly affected the color difference (P<.05). A significant interaction was present between the thickness and the material (P<.05). The results of multiple regression analyses showed that the average color difference of LR increased by 0.019 as the thickness of the core decreased by 0.2 mm. CONCLUSIONS: The color is influenced by the thicknesses of the core and the veneer. With a certain thickness, the color differences increased as the thickness of the core decreased, and lithium disilicate ceramics were less vulnerable to standard deviation of color difference compared with the leucite-reinforced ceramics.