Comparative cell viability of dentin-bonding adhesive systems on human dental pulp stem cells: time-dependent analysis.

BACKGROUND: Restorative materials are in prolonged contact with living tissues such as oral mucosa, dentin, pulp, periodontal, and periapical tissues. Therefore, the potentially harmful effects of these materials and their components on oral tissues should be evaluated before clinical use. This study aimed to compare the cell viability of different adhesive systems (ASs) on human dental pulp stem cells (hDPSCs). METHODS: Three ASs that combining methacryloyloxydecyl dihydrogen phosphate (MDP) monomer with new hydrophilic amide monomers [Clearfil Universal Bond Quick(CUBQ), Kuraray Noritake], self-reinforcing 3D monomer [Bond Force II(BFII), Tokuyama)], and dual-cure property [Futurabond DC(FBDC), VOCO] were used. Three (n = 3) samples were prepared for each group. Dental pulp stem cells were isolated from ten patients' extracted third molar teeth. Samples were incubated in Dulbecco's modified Eagle's medium (DMEM) for 24 h (h), 72 h, and 7 days (d) to obtain extracts. For the control group, cells were cultured without DBA samples. Cell viability of ASs extracts was measured using a cell proliferation detection kit (WST-1, Roche). Statistical analysis was performed using two-way ANOVA and post-hoc (Duncan) tests (p < 0.05). RESULTS: At 24 and 72 h statistically significant differences were determined between control and BFII, control and FBDC groups (p < 0.05), while no differences between control and CUBQ groups (p > 0.05). On the 7th d, statistically significant differences were found between the control and experimental groups (p < 0.05), while no differences between experimental groups (p > 0.05). A statistically significant difference was detected for the BFII group over the three-time interval (p < 0.05). The lowest cell viability was observed for the FBDC group at 24 h, and the difference was statistically significant when compared with 72 h and 7th d (p < 0.05). CONCLUSION: All ASs showed different cell viability values at various exposure times. It should be taken into consideration that pH values, as well as the contents of ASs, have a significant effect on the cell viability.

Examination of caries-affected dentin and composite-resin interface after different caries removal methods: A scanning electron microscope study.

To evaluate the caries-affected dentin and composite-resin interface with scanning electron microscopy (SEM) after different caries removal methods in human molars. Twelve with extensive approximal caries lesions that did not reach the pulp and five caries-free molars (control group [CG]) were used. Carious teeth were divided into four experimental groups: Atraumatic Restorative Treatment (ART), Rotary Instrument (RI), Photo-Ablation, and Papain-Based Enzymatic Gel (Brix 3000®, Brix, Brazil). Class II slot cavities were prepared with RI in the CG. Then all caries removed teeth and control groups were restored (All-Bond Universal, BISCO, USA; Clearfil MajestyES-2, Kuraray, Japan). Specimens were prepared for SEM examinations. Hybrid layer (HL) thicknesses were measured using ImageJ programme. Gap measurements were performed with micro-CT. Data were analyzed with ANOVA and posthoc Dunnett's t-tests (p < .05). The highest HL thickness was found in Photo-Ablation Group, and a statistically significant difference was observed among the control and experimental groups (p < .05). The lowest HL thickness was measured in the Enzymatic Gel Group. In terms of internal gap formation, CG showed statistically significant differences compared to the other groups (p < .05). The highest internal gap was observed in RI Group, while the lowest gap was observed in CG. According to SEM, a uniform HL and resin tags were seen in the CG. Smear layer, irregular HL, and gap formation were observed in ART Group. In RI Group, nonuniform HL formation and resin tags were observed. In Photo-Ablation Group, a uniform HL without smear layer and internal gap was observed. In the Enzymatic Gel Group, both opened dentinal tubules, and melting-like formations were observed on the dentin surface. Especially melting-like formations were observed in peritubular dentin. It can be concluded that all caries removal methods except rotary instrumentation were conservative methods, which preserve more healthy dental tissues. RESEARCH HIGHLIGHTS: Among the caries removal procedures, the photo-ablation caries removal method stands out with the highest hybrid layer (HL) thickness and the lowest internal gap formation. Despite having the lowest HL thickness, the enzymatic gel method can be advantageous for patients requesting an alternative caries removal instead of a rotary instrument.

A Preliminary Research Study on the Cytotoxicity of Expired and Non-expired Composite Resins: In Vitro Study / Estudio preliminar in vitro de la citotoxicidad de resinas compuestas caducadas y no caducadas

Astracts Objective: Studies have focused on use of non-expired composites. Unfortunately some clinicians still use expired composite resins without considering their effects. The objective of this in vitro preliminary research was to investigate cytotoxicity of expired(6-months) and non-expired composite resins. Materials and methods: Expired (E) and non-expired (NE) samples of one bulk-fill (Tetric N-Ceram Bulk-fill (TNB), Ivoclar Vivadent), two nano-hybrid (Tetric N-Ceram (TN), Ivoclar Vivadent; Clearfil Majesty ES-2 (CM), Kuraray) composite resins were tested on L929 fibroblast cells. Medium covering cells was removed then plastic rings (2-mm height) were filled with non-polymerized composite resins, placed in direct contact with cells and polymerized with LED light curing unit (LCU). Three samples were prepared for each group. After polymerization, removed medium was added to the cells. Cells that were left without medium (WOM) and cells that were exposed to LCU were used as positive control groups. Cells without any treatment were used as negative control group (C). Cells were incubated with tested materials for 7-days to evaluate cytotoxicity. Cell viability was calculated by sulforhodamine B test as a percentage (%). One-way ANOVA and post-hoc Tukey tests were used for statistical analyses (p0.05), except between TN NE and TN E (p0.05). All experimental groups compared with C group showed statistically significant cytotoxicity (p<0.05). A statistically significant difference existed between LCU and C groups (p<0.05). Conclusions: In clinical practice, expired composite resins should never be used. Although a correlation was found between expiration dates of nano-hybrid composite resins and cell viability, opposite data were obtained for bulk- fill composite resin. Researches are still required to evaluate biocompatibility of bulk- fill composite resins at various thicknesses with current LCUs.

Resumen Objetivo: Los estudios se han concentrado en el uso de resinas compuestas no vencidos. Desafortunadamente, algunos clínicos aún usan resinas caducadas sin considerar sus efectos. El objetivo de este estudio preliminar in vitro fue investigar la citotoxicidad de resinas compuestas caducadas (6 meses) y no caducadas. Materiales y métodos: muestras caducadas (E) y no caducadas (NE) de una resina bulk-fill (Tetric N-Ceram Bulk-fill (TNB), Ivoclar Vivadent) y dos resinas nanohíbridas (Tetric N-Ceram (TN) Ivoclar Vivadent) (Clearfil Majesty ES-2 (CM), Kuraray), se probaron en células de fibroblastos L929. Se retiraron las células que cubrían el medio, luego se llenaron anillos de plástico (2 mm de altura) con resinas no polimerizadas, se colocaron en contacto directo con las células y se polimerizaron con una unidad de fotocurado LED (LCU). Se prepararon tres muestras para cada grupo. Después de la polimerización, se añadió el medio eliminado a las células. Las células que quedaron sin medio (WOM) y las células que se expusieron a LCU se usaron como grupos de control positivo. Las células sin ningún tratamiento se utilizaron como grupo de control negativo (C). Las células se incubaron con las resinas durante 7 días para evaluar la citotoxicidad. La viabilidad celular se calculó mediante la prueba de sulforodamina B como un porcentaje (%). ANOVA unidireccional y pruebas post-hoc de Tukey se utilizaron para los análisis estadísticos (p 0.05), excepto entre TN NE y TN E (p 0.05). Todos los grupos experimentales en comparación con el grupo C mostraron citotoxicidad estadísticamente significativa (p <0,05). Existió una diferencia estadísticamente significativa entre LCU y grupos C (p <0.05). Conclusiones: En la práctica clínica, las resinas compuestas caducadas nunca deben usarse. Aunque se encontró una correlación entre las fechas de vencimiento de las resinas compuestas nano-híbridas y la viabilidad celular, se obtuvieron datos opuestos para la resina bulk-fill. Se requieren nuevas investigaciones para evaluar la biocompatibilidad de las resinas bulk-fill en distintos espesores con las LCU actuales.

Evaluating the effects of different beverages with daily consumption habits on the wear of restorative materials.

The aim of this study was to investigate the cumulative effects of fruit juices and/or alcoholic beverages on wear track area of the restorative materials by simulating the oral environment in vitro. A microhybrid, a sub-microhybrid, a nanofill resin composite, and a giomer material were used. A daily exposure habits model was created to simulate consumption frequency of acidic and/or alcoholic beverages. Two-body wear tests were carried out using a reciprocating wear tester. ANOVA and Tukey's HSD tests were used for statistical analyses (p < 0.05). When considering experimental groups related to daily exposure habits, statistical difference was found between restorative materials in terms of wear track area (p < 0.01). Joint effect of rmaterial and exposure on wear track area was statistically significant (p < 0.01). Giomer was found to be more affected by acidic and alcoholic beverages. Microhybrid resin composites showed less wear than the other restorative materials. Cumulative effects of alcoholic beverages and fruit juice on wear track area of materials could be related to material's composition and frequency of consumption of acid or ethanol-containing beverages. Daily cumulative effect of acidic and alcoholic beverages was found to be stronger than only acidic fruit juice consumption in terms of wear track area. The plasticizing effect and the concentration of ethanol in the alcoholic beverages provided the basis for the increased wear track area on the restorative materials.

The use of a liner under different bulk-fill resin composites: 3D GAP formation analysis by x-ray microcomputed tomography.

INTRODUCTION: Gap formation of composite resin restorations is a serious shortcoming in clinical practice. Polymerization shrinkage stress exceeds the tooth-restoration bond strength, and it causes bacterial infiltration within gaps between cavity walls and the restorative material. Thus, an intermediate liner application with a low elastic modulus has been advised to minimize polymerization shrinkage as well as gap formation. OBJECTIVE: The purpose of this in vitro study was to assess gap formation volume in premolars restored with different bulk-fill composites, with and without a resin-modified glass-ionomer cement (RMGIC) liner, using x-ray micro-computed tomography (micro-CT). METHODOLOGY: Sixty extracted human maxillary premolars were divided into six groups according to bucco-palatal dimensions (n=10). Standardized Class II mesio-occluso-distal cavities were prepared. G-Premio Bond (GC Corp., Japan) was applied in the selective-etch mode. Teeth were restored with high-viscosity (Filtek Bulk Fill, 3M ESPE, USA)-FB, sonic-activated (SonicFill 2, Kerr, USA)-SF and low viscosity (Estelite Bulk Fill Flow, Tokuyama, Japan)-EB bulk-fill composites, with and without a liner (Ionoseal, Voco GmbH, Germany)-L. The specimens were subjected to 10,000 thermocycles (5-55°C) and 50,000 simulated chewing cycles (100 N). Gap formation based on the volume of black spaces at the tooth-restoration interface was quantified in mm3 using micro-computed tomography (SkyScan, Belgium), and analyses were performed. Data were analyzed using repeated-measures ANOVA and the Bonferroni correction test (p < 0.05). RESULTS: The gap volume of all tested bulk-fill composites demonstrated that Group SF (1.581±0.773) had significantly higher values than Group EB (0.717±0.679). Regarding the use of a liner, a significant reduction in gap formation volume was observed only in Group SFL (0.927±0.630) compared with Group SF (1.581±0.773). CONCLUSION: It can be concluded that different types of bulk-fill composite resins affected gap formation volume. Low-viscosity bulk-fill composites exhibited better adaptation to cavity walls and less gap formation than did sonic-activated bulk-fill composites. The use of an RMGIC liner produced a significant reduction in gap formation volume for sonic-activated bulk-fill composites.

The use of a liner under different bulk-fill resin composites: 3D GAP formation analysis by x-ray microcomputed tomography

Abstract Gap formation of composite resin restorations is a serious shortcoming in clinical practice. Polymerization shrinkage stress exceeds the tooth-restoration bond strength, and it causes bacterial infiltration within gaps between cavity walls and the restorative material. Thus, an intermediate liner application with a low elastic modulus has been advised to minimize polymerization shrinkage as well as gap formation. Objective: The purpose of this in vitro study was to assess gap formation volume in premolars restored with different bulk-fill composites, with and without a resin-modified glass-ionomer cement (RMGIC) liner, using x-ray micro-computed tomography (micro-CT). Methodology: Sixty extracted human maxillary premolars were divided into six groups according to bucco-palatal dimensions (n=10). Standardized Class II mesio-occluso-distal cavities were prepared. G-Premio Bond (GC Corp., Japan) was applied in the selective-etch mode. Teeth were restored with high-viscosity (Filtek Bulk Fill, 3M ESPE, USA)-FB, sonic-activated (SonicFill 2, Kerr, USA)-SF and low viscosity (Estelite Bulk Fill Flow, Tokuyama, Japan)-EB bulk-fill composites, with and without a liner (Ionoseal, Voco GmbH, Germany)-L. The specimens were subjected to 10,000 thermocycles (5-55°C) and 50,000 simulated chewing cycles (100 N). Gap formation based on the volume of black spaces at the tooth-restoration interface was quantified in mm3 using micro-computed tomography (SkyScan, Belgium), and analyses were performed. Data were analyzed using repeated-measures ANOVA and the Bonferroni correction test (p < 0.05). Results: The gap volume of all tested bulk-fill composites demonstrated that Group SF (1.581±0.773) had significantly higher values than Group EB (0.717±0.679). Regarding the use of a liner, a significant reduction in gap formation volume was observed only in Group SFL (0.927±0.630) compared with Group SF (1.581±0.773). Conclusion: It can be concluded that different types of bulk-fill composite resins affected gap formation volume. Low-viscosity bulk-fill composites exhibited better adaptation to cavity walls and less gap formation than did sonic-activated bulk-fill composites. The use of an RMGIC liner produced a significant reduction in gap formation volume for sonic-activated bulk-fill composites.

Effect of Polymerization Time and Home Bleaching Agent on the Microhardness and Surface Roughness of Bulk-Fill Composites: A Scanning Electron Microscopy Study.

OBJECTIVE: The aim of this study is to evaluate the microhardness and surface roughness of two different bulk-fill composites polymerized with light-curing unit (LCU) with different polymerization times before and after the application of a home bleaching agent. MATERIALS-METHODS: For both microhardness and surface roughness tests, 6 groups were prepared with bulk-fill materials (SonicFill, Filtek Bulk Fill) according to different polymerization times (10, 20, and 30 s). 102 specimens were prepared using Teflon molds (4 mm depth and 5 mm diameter) and polymerized with LCU. 30 specimens (n = 5) were assessed for microhardness. Before home bleaching agent application, the bottom/top (B/T) microhardness ratio was evaluated. After bleaching agent application, the microhardness measurements were performed on top surfaces. Roughness measurements were performed in 72 specimens (n = 12) before and after bleaching application. Additionally, for SEM analyses, two specimens from all tested groups were prepared before and after bleaching agent application. The data B/T microhardness ratio before bleaching was analyzed by two-way ANOVA and Tukey's HSD test. The data from the top surface of specimens' microhardness before and after bleaching were analyzed using Wilcoxon signed-rank test, Kruskal-Wallis, Mann-Whitney U tests. The data from surface roughness tests were statistically analyzed by multivariate analysis of variance and Bonferroni test (p < 0.05). RESULTS: The B/T microhardness ratio results revealed no significant differences between groups (p > 0.05). Comparing the microhardness values of the composites' top surfaces before and after bleaching, a significant decrease was observed exclusively in FB30s (p < 0.05). No significant differences in surface roughness values were observed when the groups were compared based on bulk-fill materials (p > 0.05) while the polymerization time affected the surface roughness of the SF20s and SF30s groups (p < 0.05). After bleaching, surface roughness values were significantly increased in the SF20s and SF30s groups (p < 0.05). CONCLUSION: The clinicians should adhere to the polymerization time recommended by the manufacturer to ensure the durability of the composite material in the oral environment.

Can Fiber Application Affect the Fracture Strength of Endodontically Treated Teeth Restored with a Low Viscosity Bulk-Fill Composite?

OBJECTIVE: The aim of this study is to evaluate the effects of different fiber insertion techniques and thermomechanical aging on the fracture resistance of endodontically treated mandibular premolar teeth restored using bulk-fill composites. MATERIALS AND METHODS: Eighty human mandibular premolar teeth were randomly divided into eight groups: Group IN, Group BF, Group PRF1, Group PRF2, Group IN-TMA, Group BF-TMA, Group PRF1-TMA ,and Group PRF2-TMA. Group IN (intact) and Group IN-TMA (intact but subjected to thermomechanical aging) served as control groups. In the other six groups, endodontic treatment was performed and standardized mesio-occluso-distal (MOD) cavities were prepared. In BF, PRF1, and PRF2, the cavities were restored with bulk-fill composite only, bulk-fill/Ribbond, and bulk-fill/additional Ribbond, respectively. In BF-TMA, PRF1-TMA, and PRF2-TMA, the teeth were subjected to thermomechanical aging after the restorations. All of the teeth were fractured on the universal testing machine. Fracture surfaces were analyzed with a stereomicroscope. RESULTS: Control groups showed significantly higher fracture strengths than tested groups (P<0.05). No statistically significant difference was observed among the tested groups (P>0.05). Most of the favorable fractures were seen in PRF1, PRF2, and PRF2-TMA. Most of the unfavorable fractures were seen in BF-TMA. CONCLUSIONS: Although fiber insertion with different techniques did not increase the fracture strength of teeth restored with bulk-fill composites, it increased the favorable fracture modes. Thermomechanical aging did not change the fracture strength of the groups.

Microhardness and water solubility of expired and non-expired shelf-life composites.

BACKGROUND:: The aim of this study was to determine the Vickers hardness and water solubility of expired and non-expired shelf-life bulk-fill and conventional dental composite material. METHODS:: Four different expired (E) (after 6 months) and non-expired (N) shelf-life composite resin materials (Clearfil Majesty ES-2 Enamel, Clearfil Majesty ES-2 Dentin, Tetric N-Ceram Bulk-Fill, and Tetric N-Ceram) were used. For each tested material, seven specimens were prepared and polymerized with a light curing unit. Vickers hardness measurements were made on the top and bottom surfaces. For the water sorption test, initially all specimens were weighted, the thickness and diameter of each specimen were measured, and the average volume of specimen was calculated. Then, each specimen was immersed in distilled water and kept in an incubator for 7 days and finally weighed again. RESULTS:: There was not any statistically significant difference between the microhardness results of expired and non-expired shelf-life composites on the top and bottom surfaces (p > 0.05). No significant difference was determined between the non-expired shelf-life composite materials on the top surfaces (p > 0.05). Non-expired Clearfil Majesty ES-2 Dentin showed lower microhardness than non-expired Tetric N-Ceram Bulk-Fill and non-expired Tetric N-Ceram on the bottom surface (p < 0.05). Expired Clearfil Majesty ES-2 Dentin showed lower microhardness results than expired Tetric N-Ceram Bulk-Fill on the top and bottom surfaces (p < 0.05). There was not any significant difference between the water sorption results of expired and non-expired shelf-life composites (p > 0.05). Expired Clearfil Majesty ES-2 Dentin showed higher water sorption than expired Tetric N-Ceram E-TN (p < 0.05). CONCLUSION:: Expiration date did not affect the microhardness and water sorption of bulk-fill and conventional composites. The hardness and water sorption of the composite materials varied depending on the type of composites.

A case of multiple dental anomalies: a variant of Ekman-Westborg-Julin trait.

Simultaneous occurrence of multiple dental anomalies is relatively common and has been reported particularly in cases with systemic alterations or syndromes. However, in 1974, Ekman-Westborg and Julin described a unique case of multiple macrodontia and multituberculism of posterior teeth accompanied by multiple dental malformations without other systemic anomalies. Here we report the case of a 20-year-old female patient who presented with macrodontia affecting her maxillary lateral teeth, mandibular incisors, and impacted multituberculated wisdom teeth accompanied by other dental anomalies that manifested itself as a variant of the Ekman-Westborg-Julin trait.

Examination of paramolar tubercles in Turkish population using cone beam computed tomography / Estudio de los tuberculos paramolares en una población turca mediante tomografía computarizada de haz cónico

SUMMARY: Paramolar tubercle (PT) is an additional cusp occuring on buccal surface of both upper and lower permanent molars. PT is also known as parastyle when tubercle is present in upper molars, as protostylid when tubercle is present in lower molars. The aim of this study was to evaluate prevalence of PTs in Turkish population with cone beam computed tomography (CBCT). Presence of PT in molar teeth were evaluated retrospectively using CBCT images of 210 patients (102 male, 108 female) between 18-77 years old. A total of 909 teeth were analyzed. Because of various reasons some teeth were excluded and final analyze was done with 653 teeth. Prevalence of PT was found as 2.76 % (18 out of 653). Highest frequency of PT was detected 5 in #27, 4 in #17, 2 in #48 among all molar teeth respectively. In two cases; 2 PTs were on the same tooth, bilateral PT was found only in one case. PT was undetected on upper first molars. Prevalence of PTs on permanent molars is a rare phenomenon in the studied population. Use of CBCT in such anatomic variations will provide valuable and detailed information during treatment modalities. Since this pilot study represents Turkish subpopulation, comprehensive studies with increased number of cases should be undertaken to clarify the prevalence of paramolars in Turkish population. Advanced imaging techniques like CBCT will be more helpful in understanding and detecting exact morphological and anatomical variations of PTs during treatment modalities.

RESUMEN: El tubérculo paramolar (TP) es una cúspide adicional que está en la superficie vestibular de los molares permanentes superiores e inferiores. El objetivo de este estudio fue evaluar la predisposición de TP en la población turca con tomografía computarizada de haz cónico (TCHC). Presencia de TP en dientes molares se evaluaron retrospectivamente utilizando imágenes de tomografia de 210 pacientes (102 hombres, 108 mujeres) entre 18-77 años de edad. Se analizó un total de 909 dientes. Por varias razones, algunos dientes fueron excluídos y el análisis final se realizó con 653 dientes. Prevalencia de PTP se encontró en el 2,76 % (18 dientes de 653). La frecuencia más alta de TP se detectó: 5 en # 27, 4 en # 17, 2 en # 48, entre todos los dientes molares, respectivamente. En dos casos, 2 de los TP fueron observados en el mismo diente; TP bilateral sólo se encontró en un caso. El TP no fue detectado en los primeros molares superiores. La prevalencia de TP en los molares permanentes es un fenómeno poco frecuente en la población estudiada. El uso de la TCHC en tales variaciones anatómicas, proporcionará información valiosa y detallada para definir la aplicación de diferentes modalidades de tratamiento. Dado que este estudio piloto representa a una subpoblación turca, estudios exhaustivos con un mayor número de casos deben llevarse a cabo para determinar la prevalencia en la población turca total. Técnicas avanzadas de imagen como TCHC serán más útiles para detectar variaciones morfológicas y anatómicas exactas de TP durante diversas modalidades de tratamiento.

Oral hygiene habits and oral health status of female adolescents under state protection: a pilot study.

PURPOSE: The aim of this study is to evaluate oral health status and oral hygiene practices of female adolescents under state protection. SUBJECTS AND METHODS: Fifty-five female participants between the age of 12 and 18 who are under the care of The Child Protection Institution were included in this study. Self-administered questionnaires were used to obtain information regarding knowledge of oral health and habits. Dental caries status was scored according to the criteria of the World Health Organization (WHO), using the indices of Decayed (D), Missing (M), Filled (F), Surfaces (S) (DMFS). In addition, Gingival Index (GI) and Plaque Index (PI) were recorded during periodontal assessment. Data was statistically analyzed by using Oneway analysis of variance, Tukey's HSD and Student's t tests. RESULTS: Fourteen children had dental fear and 52.7% of them were not satisfied with their esthetic appearance. Although 78.2% of the children knew that brushing prevents dental caries, only 18 of them were brushing regularly twice per day. Mean DMFS, GI and PI scores were 13.18±5.68, 1.35±0.37 and 1.33±0.45, respectively. Only 20% of the children were using dental floss. There was statistically no significant difference between the DMFS scores of the children in terms of flossing. However, the difference between the mean GI and PI of the same group was found to be statistically significant (p<0.05). CONCLUSION: Children under state protection were found to have a reasonable knowledge of the causes of dental caries and gum bleeding. Therefore, adequate management of this positive attitude can significantly improve the oral health of this population.

Colour preference between adults and children during a dental treatment session.

BACKGROUND: It is evidently shown that colour has physical, psychological and sociological effects on human beings. There are many studies showing the effects of colours on brain activity. Colour preferences may change from childhood to adulthood and are significantly different in various age groups. The aim of this study was to evaluate the adults and children in their preference for mouthrinses in various colours under stress condition during a dental treatment session. METHODS: 240 adults and 263 children were included in the study. Three transparent cups were filled with water, two of which were coloured green/pink rinsing by dissolving a tablet in the water. Cups were placed near the dental unit. During dental treatment sessions, patients were told to rinse their mouth with whichever cup they preferred. Preferred colour of cup, gender and age of patient, number of sessions were recorded. Data were statistically analysed by SPSS 15.0 programme and chi-square tests. RESULTS: Half of all cases preferred water. In adults, while females statistically significantly preferred water, males chose cups with coloured contents (p<0.01). Male adults preferred more than one rinsing solution in a dental treatment session. Children mostly preferred water. Even if adults preferred cups with coloured contents in multi-dental treatment sessions, children regularly preferred water (p<0.001). Female and male children mostly preferred water as a rinsing solution. Water was the most often choice for all patients. Both patients' gender and colours of cups affected choices made by adults and children. CONCLUSIONS: Female adults and children were not interested in trying colourful mouthrinses, while male adults were curious about trying colourful mouthrinses during dental treatment sessions under stress condition.

Color Stability of Composites After Short-term Oral Simulation: An in vitro Study.

BACKGROUND: Although most of the studies investigated color stability of different restorative materials, evaluation of color stability of composites after immersion in multiple beverages in the same day by an in vitro oral simulation study is unclear. OBJECTIVE: To assess color change of different restorative materials at the end of days 1, 14, and 30 of immersion in multiple liquid types to mimic the oral environment in vitro. METHOD: Ten disc-shaped specimens were made from each of four different resin composites (Filtek Z250, Voco x-tra base, Beautifil Flow Plus, Beautifil II). Baseline color value of each sample was measured using a spectrophotometer. Each composite was respectively immersed in coffee, an orange/pomegranate juice mixture, black tea, and a mouth rinse on the same day to mimic daily liquid consumption of individuals. Color measurements were taken after 1, 14, and 30 days by spectrophotometer and color change values were calculated. Statistical analyses were executed by one-way ANOVA/Tukey HSD and repeated-measures ANOVA. RESULTS: All materials showed significant color change after 1, 14, and 30 days (P < 0.01) of immersion in liquids, with the lowest color alteration observed at the 1st day and the highest observed after the 30th day. Among the materials tested, at each time point (1, 14, and 30 days), the lowest color alteration was detected in Filtek Z250 and the highest color alteration was detected in Beautifil II. CONCLUSION: Color alteration of composite resins is affected by composite type and storage time. With the exception of 1 day of storage, color changes of all materials were substantial and clinically unacceptable.