RESUMEN
The oil industry in Khuzestan province (Southwest Iran) is one of the main reasons contributing to the pollution of the environment in this area. TPH, including both aromatic and aliphatic compounds, are important parameters in creating pollution. The present study aimed to investigate the source of soil contamination by TPH in the Ahvaz oil field in 2022. The soil samples were collected from four oil centers (an oil exploitation unit, an oil desalination unit, an oil rig, and a pump oil center). An area outside the oil field was determined as a control area. Ten samples with three replicates were taken from each area according to the standard methods. Aromatic and aliphatic compounds were measured by HPLC and GC methods. The positive matrix factorization (PMF) model and isomeric ratios were used to determine the source apportionment of aromatic compounds in soil samples. The effects range low and effects range median indices were also used to assess the level of ecological risk of petroleum compounds in the soil samples. The results showed that Benzo.b.fluoranthene had the highest concentration with an average of 5667.7 ug/kg in soil samples in the Ahvaz oil field. The highest average was found in samples from the pump oil center area at 7329.48 ug/kg, while the lowest was found in control samples at 1919.4 ug/kg-1. The highest level of aliphatic components was also found in the pump oil center, with a total of 3649 (mg. Kg-1). The results of source apportionment of petroleum compounds in soil samples showed that oil activities accounted for 51.5% of the measured PAHs in soil. 38.3% of other measured compounds had anthropogenic origins, and only 10.1% of these compounds were of biotic origin. The results of the isomeric ratios also indicated the local petroleum and pyrogenic origin of PAH compounds, which is consistent with the PMF results. The analysis of ecological risk indices resulting from the release of PAHs in the environment showed that, except for fluoranthene, other PAHs in the oil exploitation unit area were above the effects range median level (ERM) and at high risk. The results of the study showed that soil pollution by total petroleum hydrocarbons (TPH), both aromatic and aliphatic, is at a high level, and is mainly caused by human activities, particularly oil activities.
Asunto(s)
Monitoreo del Ambiente , Contaminación por Petróleo , Petróleo , Contaminantes del Suelo , Suelo , Contaminantes del Suelo/análisis , Petróleo/análisis , Contaminación por Petróleo/análisis , Suelo/química , Irán , Yacimiento de Petróleo y Gas , Hidrocarburos/análisisRESUMEN
The increasing pollution of aquatic ecosystems caused by microplastics (MPs) and heavy metal ions worldwide threatens the life of aquatic organisms, including amphibians. In this study, we investigated the presence and accumulation of MPs and heavy metal ions in the upper gastrointestinal tract (GIT) of the Levant frog (Pelophylax bedriagae) as a bioindicator in contaminated sites of Western Iran. A total of 192 adult frogs from 16 locations in the west and northwest of Iran were collected. We measured the accumulation of MPs and heavy metal ions in the collected frogs and determined the characteristics of MPs in the samples. Our findings revealed widespread MPs and heavy metal ions contamination in the frog GIT across all sampled stations. We found 742 MP particles in the digestive system of frogs, with the highest (7.09 MP/individual) and lowest (2.37 MP/individual) number observed in stations 10 and 9, respectively. Fibers were the most common MPs and polyester (PES) (42.5%) and polyethylene terephthalate (PET) (17.2%) were found to be the most common polymers in the GIT of frogs. The average accumulation of heavy metal ions showed significant differences (P < 0.05) among 16 sampling stations, and zinc (II) and mercury (II) showed the highest and lowest concentrations in frogs. We also found moderate to strong positive correlations between the detected MPs and heavy metal ions in the frog samples across all sampling stations. Our findings confirm the contamination of frogs by MPs and heavy metal ions and the potential capacity of MPs to increase the toxicity of heavy metals in P. bedriagae as a bioindicator in contaminated sites.
RESUMEN
Mining activities have increased the potential risks of metal pollution to the groundwater resources in arid areas across the globe. Therefore, this study aimed to examine the health risk associated with nickel (Ni) in the groundwater sources of a mining-impacted area, South Khorasan, Eastern Iran. A total of 110 stations were included in the study, comprising 62 wells, 40 qanats, and 8 springs in summer, 2020. Initially, the collected samples were tested for temperature, pH, and electrical conductivity (EC). Subsequently, the samples were filtered and treated with nitric acid (HNO3) to measure the concentration of Ni using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Hazard quotient (HQ) and non-carcinogenic risk assessments were employed to evaluate the potential risks of Ni to the inhabitants. The findings revealed that the concentration of Ni ranged from 0.02 to 132.39 µg l-1, and only two stations exhibited Ni concentrations above the WHO standards (20 µg l-1). The results demonstrated that 98.21% of the sampled locations had HQ values below one, indicating negligible risk, while 1.78% of the stations exhibited HQ values of one or higher, representing a high non-carcinogenic risk for water consumers. Overall, the concentration of nickel in the groundwater of South Khorasan exceeded the World Health Organization (WHO) limit solely in the Halvan station, posing a non-carcinogenic risk for the residents in that area, and therefore, additional efforts should be made to provide healthier groundwater to consumers in this region.
Asunto(s)
Monitoreo del Ambiente , Agua Subterránea , Minería , Níquel , Contaminantes Químicos del Agua , Níquel/análisis , Agua Subterránea/análisis , Agua Subterránea/química , Medición de Riesgo , Contaminantes Químicos del Agua/análisis , Humanos , Irán , Monitoreo del Ambiente/métodosRESUMEN
BACKGROUND: Shoulder arthroscopy is commonly performed at ambulatory surgical centers (ASCs) with use of an interscalene block and inhaled general anesthesia (IGA). However, an alternative option known as total intravenous anesthesia with propofol (TIVA-P) has shown promising results in reducing recovery time for other surgeries. The objective of this study was to assess whether there is a clinically meaningful difference in post-anesthesia care unit phase-I (PACU-I) time following shoulder arthroscopy between patients receiving an interscalene block with IGA and those receiving an interscalene block with TIVA-P. METHODS: Patients who underwent shoulder arthroscopy performed by a single surgeon at the ASC of our institution between 2020 and 2023 were enrolled. Enrollment was conducted in blocks, with up to 3 planned interim analyses. After 2 blocks, enrollment was halted because the study arms demonstrated a significant difference in the primary outcome measure, PACU-I time. A total of 96 patients were randomized into the TIVA-P and IGA groups; after patient withdrawals, the groups comprised 42 and 40 patients, respectively. Patients underwent shoulder arthroscopy with use of the anesthesia method corresponding to their assigned group. Pain, satisfaction, antiemetic use, perioperative interventions, surgical time, PACU-II time, postoperative care time, and total time until discharge were recorded and were analyzed with use of chi-square and Mann-Whitney U tests with a significance cutoff of 0.0167 to account for the interim analyses. RESULTS: Across groups, 81.7% of patients were non-Hispanic White and 58.5% were male. Significant differences were observed between the TIVA-P and IGA groups with respect to median PACU-I time (0.0 minutes [interquartile range (IQR), 0.0 to 6.0 minutes] versus 25.5 minutes [IQR, 20.5 to 32.5 minutes]; p < 0.001) and median total time until discharge (135.5 minutes [IQR, 118.5 to 156.8 minutes] versus 148.5 minutes [IQR, 133.8 to 168.8 minutes]; p = 0.0104). The TIVA-P group had a 9.1% quicker discharge time, primarily as a result of bypassing PACU-I (66.7% of patients) and spending 25.5 fewer minutes there overall. The TIVA-P group also had a lower rate of antiemetic use than the IGA group (59.5% versus 92.5% of patients; p = 0.0013). No significant differences were detected between the TIVA-P and IGA groups in terms of median pain improvement (1.0 [IQR, 0.0 to 2.0] versus 1.0 [IQR, 0.0 to 2.0]; p = 0.6734), perioperative interventions (78.6% versus 77.5% of patients, p = 1.0000), or median patient satisfaction (4.0 [IQR, 4.0 to 4.0] versus 4.0 [IQR, 3.8 to 4.0]; p = 0.4148). CONCLUSIONS: TIVA-P showed potential to improve both PACU-I time and the total time until discharge while reducing antiemetic use without impacting pain or satisfaction. TIVA-P thus warrants consideration by orthopaedic surgeons for use in shoulder arthroscopy performed at ASCs. LEVEL OF EVIDENCE: Therapeutic Level I . See Instructions for Authors for a complete description of levels of evidence.
Asunto(s)
Anestesia General , Anestesia Intravenosa , Anestésicos Intravenosos , Artroscopía , Propofol , Articulación del Hombro , Humanos , Artroscopía/métodos , Propofol/administración & dosificación , Masculino , Femenino , Persona de Mediana Edad , Anestesia General/métodos , Anestesia Intravenosa/métodos , Articulación del Hombro/cirugía , Anestésicos Intravenosos/administración & dosificación , Adulto , Periodo de Recuperación de la Anestesia , Procedimientos Quirúrgicos Ambulatorios/métodos , Tiempo de Internación/estadística & datos numéricos , Alta del Paciente , AncianoRESUMEN
In this study, a CoO-Fe2O3/SiO2/TiO2 (CIST) nanocomposite was synthesized and utilized as an adsorbent to remove methylene blue (MB), malachite green (MG), and copper (Cu) from aqueous environments. The synthesized nanocomposite was characterized using field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). Input parameters included pH (3-10), contact time (10-30 min), adsorbent amount (0.01-0.03 g), and pollutant concentration (20-60 mg L-1). The effects of these parameters on the removal process efficiency were modeled and optimized using the response surface methodology (RSM) based on the Box-Behnken design (BBD). The RSM-BBD method demonstrated the capability to develop a second-degree polynomial model with high validity (R2 Ë 0.99) for the removal process. The optimization results using the RSM-BBD method revealed a removal efficiency of 98.01%, 93.06%, and 88.26% for MB, MG, and Cu, respectively, under optimal conditions. These conditions were a pH of 6, contact time of 10 min, adsorbent amount of 0.025 g, and concentration of 20 mg L-1. The synthesized adsorbent was recovered through five consecutive adsorption-desorption cycles using hydrochloric acid. The results showed an approximately 12% reduction from the first to the seventh cycle. Also, MB, MG, and Cu removal from real water samples in optimal conditions was achieved in the range of 81.69-98.18%. This study demonstrates the potential use of CIST nanocomposite as an accessible and reusable option for removing MB, MG, and Cu pollutants from aquatic environments.
RESUMEN
Man-made activities pose the greatest threats to wildlife in Iran's terrestrial biomes, causing significant habitat damage and fragmentation in recent years. To fully understand these threats, the present study was conducted to identify and map the Iran's terrestrial biomes using the IDRISI TerrSet 18.31 Software, the Terrestrial Biomes Ecosystem Service Modeler on the InVEST toolkit (TBESMI), and comprehensive data sources including maps of roads, protected areas, terrestrial biomes, and country-wide land cover maps of 2017. The results showed that the largest terrestrial biome in Iran is deserts and xeric shrublands (DXS), while flooded grasslands and savannas (FGS) is the smallest biome. Roads, along with urban and agricultural developments are among the biggest threats and most destructive stressors in Iran's terrestrial biomes. The results also revealed that there was a growth in destruction of habitats located in the temperate broadleaf and mixed forest (TBMF), temperate coniferous forest (TCF), and FGS, alongside a decrease in the DXS biome. Furthermore, we detected an increase in habitat landscape quality in the DXS, FGS and montane grasslands and shrub lands (MGS), and a decrease in the temperate grasslands, savannas and shrublands (TGSS) and TBMF biomes. Finally, the cumulative risk of habitat degradation increased in the FGS, TCF, TGSS, and TBMF biomes, whereas it decreased in the DXS biome. The FGS biome with the highest consequence cumulative score, and the MGS biome with the highest cumulative risk exposure score were found to be at the highest risk from man-made activities. Stressors associated with agriculture and urbanization had the highest cumulative exposure scores in the MGS, while roads had the highest exposure scores in the TBMF and DXS biomes. Our study underscores the critical importance of conserving Iran's terrestrial biomes and wildlife, especially in high-risk biomes like FGS and MGS, given the substantial threats posed by human activities.
Asunto(s)
Animales Salvajes , Ecosistema , Humanos , Animales , Irán , BosquesRESUMEN
INTRODUCTION: This study aimed to assess the fracture resistance of mandibular first molars after preparation with 3 different access cavity designs and 2 rotary systems using finite element analysis. METHODS: Six 3-dimensionally printed mandibular first molars simulating natural teeth received traditional, conservative, and ultraconservative (truss) access cavity preparations. The root canals in each group were instrumented with either XP-Endo Shaper (FKG Dentaire, La Chaux-de-Fonds, Switzerland) or TruNatomy (Dentsply Sirona, Ballaigues, Switzerland) rotary files. The models were individually digitized, and micro-computed tomographic scans were transferred to Mimics software (Materialise NV, Leuven, Belgium) to create a geometric model of the tooth. The designed model was exported to 3-matic software (Materialise NV), and STL files were transferred to Geomagic Design X (3D Systems, Rock Hill, SC). Point cloud data were used for surfacing and transferred to ANSYS software (Ansys, Canonsburg, PA). A 200-N superficial force was applied vertically to the buccal cusps and central fossa, and the maximum and minimum equivalent von Mises stress values were calculated and reported. RESULTS: The traditional and ultraconservative access cavity designs yielded the highest and the lowest von Mises stress values, respectively. In the ultraconservative cavity design, the stress values in pericervical dentin were lower in canal preparation with TruNatomy compared with XP-Endo Shaper. In the traditional and conservative cavity designs, stress was lower in the first 2 mm from the cementoenamel junction in the XP-Endo Shaper group and in the next 3 mm in the TruNatomy group. CONCLUSIONS: Stress was lower in the ultraconservative and conservative cavity designs compared with the traditional design. Also, root canal preparation with TruNatomy yielded lower stress values in general compared with XP-Endo Shaper.
Asunto(s)
Cavidad Pulpar , Diente Molar , Cavidad Pulpar/diagnóstico por imagen , Análisis de Elementos Finitos , Microtomografía por Rayos X , Diente Molar/diagnóstico por imagen , Preparación del Conducto Radicular/métodosRESUMEN
Although the impact of tourism development on residents has received a lot of attention in the literature, the health impact of tourism has not been sufficiently addressed. Due to outbreaks of COVID-19, the importance of recognition of the negative health impact of tourism is relevant. Thus, the present study aims to identify the health impact of tourism through COVID-19 outbreaks considering residents' perspectives. In the current research, we gathered data from semi-structured interviews conducted from 10th August to 30 August 2020 to investigate community perception regarding the negative health impact of tourism through the COVID-19 era. We conducted 30 interviews with some Iranian residents. Data is analyzed by thematic analysis via MAXQDA software. Residents perceived negative health impacts through COVID-19 outbreaks as containing three subthemes including general negative impacts, direct negative impacts, and indirect negative impacts. The results also show that residents use two coping strategies to face these negative health impacts, namely negative coping strategies and positive coping strategies. Perceived negative health impacts, and residents' coping strategies are two major themes regarding Iranian residents' perception toward tourism negative health impacts through COVID-19 outbreaks.
RESUMEN
The anatomy of the root canal system always affects endodontic treatment outcomes. Mandibular premolar teeth demonstrate extreme variations in root canal morphology. Mandibular first premolars typically exhibit basic single-root and single-canal anatomy. The occurrence of three roots in the mandibular first premolar has not been commonly reported in the literature. This article reported a case of a 26-year-old male with spontaneous pain of the mandibular first premolar representing the presence of an extra canal on the periapical radiograph. Cone-beam computed tomography (CBCT) was used to assess the root canal details which led to the finding of three canals. Further, a periapical bone defect was detected, and finally, the nonsurgical endodontic management of the mandibular first premolar with three canals and three different apical foramina was performed in one session.
RESUMEN
BACKGROUND: Investigating genomic regions associated with morphometric traits in camels is valuable, because it allows a better understanding of adaptive and productive features to implement a sustainable management and a customised breeding program for dromedaries. OBJECTIVES: With a genome-wide association study (GWAS) including 96 Iranian dromedaries phenotyped for 12 morphometric traits and genotyped-by-sequencing (GBS) with 14,522 SNPs, we aimed at identifying associated candidate genes. METHODS: The association between SNPs and morphometric traits was investigated using a linear mixed model with principal component analysis (PCA) and kinship matrix. RESULTS: With this approach, we detected 59 SNPs located in 37 candidate genes potentially associated to morphometric traits in dromedaries. The top associated SNPs were related to pin width, whither to pin length, height at whither, muzzle girth, and tail length. Interestingly, the results highlight the association between whither height, muzzle circumference, tail length, whither to pin length. The identified candidate genes were associated with growth, body size, and immune system in other species. CONCLUSIONS: We identified three key hub genes in the gene network analysis including ACTB, SOCS1 and ARFGEF1. In the central position of gene network, ACTB was detected as the most important gene related to muscle function. With this initial GWAS using GBS on dromedary camels for morphometric traits, we show that this SNP panel can be effective for genetic evaluation of growth in dromedaries. However, we suggest a higher-density SNP array may greatly improve the reliability of the results.
Asunto(s)
Camelus , Estudio de Asociación del Genoma Completo , Animales , Estudio de Asociación del Genoma Completo/veterinaria , Irán , Reproducibilidad de los Resultados , Fenotipo , Polimorfismo de Nucleótido SimpleRESUMEN
The abundant release of toxic heavy metals into wastewater has been a serious threat to human health, aquatic environments, plants, and animals; thus, it is critical to purify wastewater of these pollutants through a proper treatment process. A novel hydrogel compound was synthesized using partially hydrolyzed polyacrylamide (PHPAm) and functionalized Fe3O4-coated magnetic nanoparticles (PHPAm/Fe3O4@SiO2-SH) that is efficient in removal of mercury and lead from wastewater. This new magnetic nanoadsorbent is characterized using scanning electron microscope, Fourier-transform infrared, thermogravimetric analysis, vibrating sample magnetometer, and energy-dispersive X-ray analysis. The central composite design under response surface methodology (CCD-RSM) was applied in designing the experiments to optimize the main parameters affecting the adsorption capacity: initial concentration (77.50 mg L-1), pH (6.11 and 6.48), adsorbent dosage (25 mg), and contact time (115 and 106 min) for both Hg2+ and Pb2+ adsorption, respectively. Quadratic models were used for variable predictions and analysis of variance was applied to evaluate the statistical parameters and investigate the interactions of the variables. The high determination coefficient (R2 0.99) for both metals indicates a good correlation between actual and predicted response values. Additionally, thermodynamic modeling showed an endothermic and exothermic for Hg2+ and Pb2+, respectively, and also the spontaneous nature of both metals' adsorption process within the temperature range of 288-318 K. Mercury and lead kinetic studies were in agreement with pseudo-second-order modeling, and the equilibrium results revealed that the Langmuir isotherm best fit the experimental data with maximum adsorption capacities of 256.41 and 227.27 (mg g-1) for Hg2+ and Pb2+, respectively. Overall, PHPAm/Fe3O4@SiO2-SH is thought to have highly promising potential for investigating heavy metals in wastewater treatment, and will make important contributions to similar studies that may be conducted in the future.
Asunto(s)
Mercurio , Metales Pesados , Nanocompuestos , Contaminantes Químicos del Agua , Humanos , Mercurio/análisis , Polímeros/química , Dióxido de Silicio , Plomo/análisis , Cinética , Aguas Residuales , Hidrogeles , Contaminantes Químicos del Agua/análisis , Metales Pesados/análisis , Nanocompuestos/química , Iones/análisis , AdsorciónRESUMEN
The groundwater resources of mining areas have been in a challenging condition in terms of metal pollution and human health. Therefore, this study investigated the concentration of cobalt (Co), molybdenum (Mo), selenium (Se), tin (Sn), and antimony (Sb) in groundwater samples (wells, qanats, and springs) in a heavily contaminated mining district, South Khorasan, Eastern Iran. Human health risk of the studied metals to target groups was assessed, and water quality of the studied groundwater was investigated in the study area. A total of 367 sampling sites (279 wells, 74 qanats, and 14 springs) in South Khorasan Province were selected to collect the groundwater samples from June to July 2020. Sampling was performed thrice for each sampling point, and hydrochemical parameters were evaluated using a portable multiparameter. Inductively coupled plasma mass spectrometry (ICP-MS) was used to detect the metal concentrations. Results showed an order of Se > Mo > Sn > Co > Sb, and hazard index (HI) demonstrated a warning condition for south of South Khorasan (drinking application), southwest of South Khorasan (Irrigation application), and east and center of South Khorasan (drinking-irrigation application). Hydrochemical parameters showed a classification of "Na + K type" and "Mixed Ca-Mg-Cl type" with an overall group of "Na-Cl-HCO3" for sampled waters. Ficklin-Caboi diagram depicted a classification of "near-neutral low metal," and Schoeller diagram classified studied groundwater as "good" for drinking and irrigation consumptions and "Na-Cl" type based on ion balance diagram. Based on the correlation analysis, positive relationships were recorded among EC, TDS, Cl-, Na+, sulfate, Ca2+, salt, total hardness, Mg2+, ammonia, and K+ measured in the water samples. In essence, arid regions of the world greatly rely upon groundwater resources for drinking and irrigation consumptions, and mining districts with a heavy load of active mines can be a serious threat to the groundwater quality and human health.
Asunto(s)
Agua Subterránea , Selenio , Oligoelementos , Contaminantes Químicos del Agua , Humanos , Oligoelementos/análisis , Selenio/análisis , Antimonio/análisis , Molibdeno/análisis , Amoníaco/análisis , Irán , Estaño/análisis , Monitoreo del Ambiente/métodos , Contaminantes Químicos del Agua/análisis , Agua Subterránea/química , Calidad del Agua , Medición de Riesgo , Sulfatos/análisis , Cobalto/análisisRESUMEN
Nowadays, the adverse effect of toxic metals on humans is well known, especially in the fetal period such as preventing cognitive development and congenital abnormalities of the central nervous system. Hence, this study aims to evaluate the toxic metal burden in mothers and newborns in Sabzevar. Obtained data can be useful for authorities in public health issues. To determine heavy metals in placental blood and umbilical cord blood, one hundred eighty blood samples were taken from ninety mothers referred to Shahidan Mobini Hospital for delivery. The amount of metals in samples was analyzed using inductively coupled plasma optical emission spectrometry (ICP OES). The results of this study revealed that 21.52%, 26.19%, and 60.71% of maternal blood samples (placental blood) and 16.47%, 56.47%, and 20% of umbilical cord blood samples were higher than the US center for disease control (CDC) recommended levels for Pb, Cd, and As respectively. According to the multiple linear regression analysis, the Pb (p = 0.054), As (p < 0.001), and Se (p < 0.001) levels had an association with the mother's living area. Also, there was a significant association between Se (0.021) and the age of the mother. However, the Se values in its optimum concentrations in the blood (60-140 µg/L) can decrease the adverse effects of toxic metals, 72.5% of the pregnant women had Se values below the 60 µg/L and only 6% of pregnant women had Se levels higher than 140 µg/L. We concluded that the mothers inhabiting the rural areas need more Se sources in their diets.
Asunto(s)
Monitoreo Biológico , Metales Pesados , Femenino , Recién Nacido , Humanos , Embarazo , Exposición Materna , Cadmio/análisis , Placenta , Mujeres Embarazadas , Irán , Plomo/análisis , Metales Pesados/análisis , Intoxicación por Metales Pesados , Sangre Fetal/química , Factores de RiesgoRESUMEN
Practitioners need to know the normal and complex anatomy of the root canal system of individual teeth. Maxillary central incisors almost in all cases have one root and one root canal system. This case report describes a non-surgical endodontic treatment of a double-rooted maxillary central incisor using cone-beam computed tomography (CBCT). A fourteen-year-old male with spontaneous pain of the maxillary left incisor showed the presence of an extra root on the periapical radiograph. CBCT was used to assess the root canal details that lead to finding a narrow root in the mesial of the main root. Also, a periapical bone defect was detected. Nonsurgical treatment of tooth performed. At the 3-month follow-up, the tooth was functional and the lesion was healed. Therefore, practitioners should consider the presence of extra roots and canals during root canal treatment. CBCT imaging helps in detecting the exact location of the extra root.
RESUMEN
This study investigated the health risk assessment of total chromium (CrT) in qanats of South Khorasan, Eastern Iran. For this, concentration of CrT in a total of 83 qanats were measured in summer 2020. Samples were initially tested in the field for temperature, pH, dissolved oxygen (DO), electrical conductivity (EC), and total dissolved solids (TDS). In the lab, collected samples were filtered and fixed with nitric acid (HNO3) for the detection of CrT using inductively coupled plasma mass spectrometry (ICP-MS). Hazard quotient (HQ) and carcinogenic risk assessments were considered to evaluate the risks of CrT to inhabitants. Results showed that concentration of CrT ranged from 1.79 to 1017.05 µg L-1, and a total of 25 stations illuminated CrT concentrations above the WHO standards (50 µg L-1). HQ demonstrated HQ < 1 for 90.37% of studied samples with negligible hazard, whereas 9.63% of stations illuminated HQ ≥ 1 meaning the presence of non-carcinogenic risk for water consumers. Carcinogenic risk (CR) exhibited CR > 1.00E-04 in 81.93% of qanats while 18.07% of stations had 1.00E-06 < CR < 1.00E-04 meaning no acceptable and acceptable CR for the studied qanats, respectively. Zoning map displayed that qanats in the south of South Khorasan possessed the highest HQ, but north regions showed the lowest ones. Together, CrT in qanats of South Khorasan is above the WHO limit, which results in a high risk of carcinogenicity for residents, and in turn, more efforts should be made to provide hygienic groundwater for consumers.
Asunto(s)
Cromo , Agua Potable , Planificación de Ciudades , Irán , Medición de RiesgoRESUMEN
Social resource theory suggests that social interaction can be conceived as resource transaction or exchange with behaviours falling within six fundamental resource categories (i.e. love, status, information, money, goods, and services) organised along two underlying dimensions: particularism-universalism and concreteness-abstractness. With the purpose of extending knowledge about quality of care, this study adopts a novel approach in that it describes and categorises care behaviours using social resource theory instead of using single instances of care behaviour. The categorisation is further used to predict client satisfaction in care services targeting older people. Daily interactions between care staff and older persons were observed in two different residential care facilities using a structured non-participant observation design. The data were analysed using principal component analysis, correlation, and regression analysis. The results confirmed the hypothesis that satisfaction with care services is predicted by resource transactions that are high on the underlying dimensions of particularism and abstractness. Thus, the resource categories of love and status (resource categories high on particularism and abstractness) were shown to be strong predictors of client satisfaction. The use of social resource theory is a novel and appropriate approach to examine person-centred care and satisfaction with care. Also, in addition to addressing potential problems in previous self-report studies on care staff behaviour, the observational technique was highly practical to this service area where dealing with clients not always able to provide feedback directly.
RESUMEN
PURPOSE: As marketization has gained ground in elderly care, satisfaction with care has come to play a crucial role in designing for high-quality care. Inspired by the service-profit chain (SPC) model, the authors aimed to gain a deeper understanding of the intricate interplay between supportive leadership practices, organizational climate, job satisfaction and service quality by predicting satisfaction with care. DESIGN/METHODOLOGY/APPROACH: A Swedish sample of frontline elderly care staff (n = 1,342) participated in a cross-sectional questionnaire study. Mediation analyses were conducted to test the proposed model. FINDINGS: As predicted, engaging in supportive leadership practices was directly and positively associated with satisfaction with care. In addition, as predicted, this relationship was partially mediated by organizational climate and job satisfaction. Moreover, job satisfaction predicted satisfaction with care with service quality explaining a statistically significant part of this relationship. PRACTICAL IMPLICATIONS: Managers in elderly care services may improve satisfaction with care in multiple ways but primarily by showing that they care about the staff and ensuring that they are satisfied with their working conditions. Employee job satisfaction seems to be particularly crucial for satisfaction with care, beyond what can be accounted for by care service quality. ORIGINALITY/VALUE: The authors proposed a novel service-outcome model. Adding to the original SPC model, the model in this study suggested and validated previously unexplored relationships including a direct path between leadership practices and satisfaction with service and a multiple-mediator model explaining this relationship. Also, new measures of organizational climate and supportive leadership were developed for which satisfactory reliability estimates were obtained.
Asunto(s)
Liderazgo , Satisfacción Personal , Anciano , Estudios Transversales , Humanos , Satisfacción en el Trabajo , Reproducibilidad de los Resultados , Encuestas y CuestionariosRESUMEN
Exposure to polycyclic aromatic hydrocarbons (PAHs) has been associated with shorter telomere length (TL), a marker of ageing at cellular level. However, the available evidence on this association among children is still scarce. We therefore aimed to assess, the relationship between urinary 1-hydroxipayrene (1-OHP), a marker of exposure to PAHs, and relative leukocyte TL (LTL) in children at preschool age. Our study was based on 200 children enrolled from 27 randomly-selected kindergartens in the city of Sabzevar, Iran (2017). 1-OHP levels in the participants' urine samples were measured using solid phase extraction (SPE) method and high-performance liquid chromatography (HPLC). Moreover, real-time PCR was used to measure the LTL in the participants' blood samples. Linear mixed effects models, controlled for relevant covariates, were applied to investigate the association of 1-OHP concentration and LTL. The median (interquartile range (IQR)) of relative LTL and urinary 1-OHP were 0.83 (0.7) and 257 (375.5) ng/L, respectively. In the fully adjusted model, an IQR increase in urinary 1-OHP was related to -0.05 (95% confidence interval (CI): 0.09, -0.01, P-value = 0.02) decrease in relative LTL. This association was similar among boys and girls; however, we observed indications for a stronger association for those children whose parents had university education. Our study suggested an inverse relationship between urinary 1-OHP and LTL in children at preschool age. However, further longitudinal research with repeated measures of PAHs and LTL are needed to confirm these findings.
Asunto(s)
Hidrocarburos Policíclicos Aromáticos , Preescolar , Estudios Transversales , Exposición a Riesgos Ambientales/análisis , Femenino , Humanos , Irán , Masculino , Hidrocarburos Policíclicos Aromáticos/análisis , TelómeroRESUMEN
BACKGROUND: The novel Coronavirus Disease 2019 (COVID-19) is the major public health burden in the world. The morbidity and mortality of the global community due to this disease is dramatically increasing from time to time. OBJECTIVE: This situational analysis is aimed to analyse prevalence and incidence of COVID-19 and to provide clear information about this disease for the scientific community, stakeholders, healthcare practitioners and decision-makers. METHODS: The literatures were identified by searching the key relevant and officially known online databases: medRxiv, Google scholar and PubMed. The online databases contain archives of most English biomedical journals and scientific papers published online from 31 December to 3 April 2020 were included. After the literature search, articles were screened independently by two reviewers for eligibility. RESULTS: The world continents have confirmed a total of 1,202,320 confirmed COVID-19 cases: (51.2%) in Europe, (27.7%) in North America, (17.9%) in Asia, (1.96%) in South America and at less number of confirmed COVID-19 cases in Africa and Australia which was accounted 0.8% and 0.5%, respectively. However, this review showed that there was a significant increase in the confirmed COVID-19 cases by 109,555 in Asia, 8,658 in Africa, 332,866 in North America, 20,269 in South America, 568,894 in Europe, 5,051 in Australia and 1,045,403 in the whole world, with the exception of Antartica, during the review period. The overall results showed that there were 1,098,762 cases and 59,172 deaths recorded during the review period. The result zero number of deaths with COVID-19 was observed in 66 countries. CONCLUSION: The review concluded that COVID-19; SARS-CoV-2 is the major public health burden in the world, the morbidity and mortality of global community is dramatically increasing from time to time. Strong collaboration among all sectors and the design of effective prevention and control strategies which include staying home, social/physical distancing, quarantine, testing of suspected patients, isolation and managing of the confirmed cases. Therefore, all countries should implement five major COVID-19 prevention and control programmes as soon as possible at community level.
Asunto(s)
COVID-19/epidemiología , Salud Global , Pandemias , COVID-19/mortalidad , Costo de Enfermedad , Humanos , Salud PúblicaRESUMEN
BACKGROUND: COVID-19 is currently the major public health burden in the world, with disease and death in the global community from COVID-19 increasing rapidly from time to time worldwide. However, there has been a lack of well-organized information about the level of risk, effects, prevention and control methods of the disease. Therefore the aim of this study is to identify and review a published level of risk, effects response to potential health emergencies, prevention, and control methods of COVID-19 at a global level. METHOD: A systematic review was performed after literatures were identified by searching the following online databases: medRxiv, Google scholar, PubMed, MEDLINE, EMBASE, and the Cochrane Library with supplementary hand searching of conferences. The online databases contain archives of most English biomedical journals. Scientific papers published online by the Center for Disease Control and the World Health Organization were also included for this analysis. The scientific publications from 01 December, 2019 to 13 April 2020 were included. The 'COVID-19', '2019 novel coronavirus', '2019-nCoV', 'novel coronavirus', and 'Pneumonia' key search terms were used for this review.