RESUMEN
BACKGROUND: Sarcopenia is associated with unfavourable long-term survival in patients undergoing liver transplantation (LT) for hepatocellular carcinoma (HCC). However, the impact of myosteatosis and muscle loss on patient prognosis has not been investigated. METHODS: Seven hundred fifty-six HCC patients who received LT at 3 transplant centres were included. Computed tomography (CT) images of recipients were collected to measure skeletal muscle index (SMI) and skeletal muscle radiodensity (SMRA). The impact of myosteatosis on the prognosis of sarcopenic and non-sarcopenic patients was studied separately. Muscle status was evaluated based on the presence of sarcopenia and myosteatosis. The muscle loss of 342 males was calculated as the relative change of SMI between pre- and post-LT evaluations. Cox regression models were used to identify predictors of overall survival (OS) and recurrence-free survival (RFS). RESULTS: The study comprised 673 males and 83 females. The median follow-up time was 31 months (interquartile range, 19-43 months). Prior to LT, 267 (39.7%) and 187 (27.8%) males were defined as sarcopenic (low-SMI) and myosteatotic (low-SMRA), respectively. For sarcopenic recipients, the presence of myosteatosis was followed by a 23.6% decrease in 5 year OS (P < 0.001) and a 15.0% decrease in 5 year RFS (P = 0.014). Univariate and multivariate analyses revealed that muscle status was an independent predictor of OS [hazard ratio (HR), 1.569; 95% confidence interval (CI), 1.317-1.869; P < 0.001] and RFS (HR, 1.369; 95% CI, 1.182-1.586; P < 0.001). Postoperatively, a muscle loss >14.2% was an independent risk factor for poor OS (HR, 2.286; 95% CI, 1.358-3.849; P = 0.002) and RFS (HR, 2.219; 95% CI, 1.418-3.471; P < 0.001) in non-sarcopenic recipients (N = 209). CONCLUSIONS: Pre-transplant myosteatosis aggravated the adverse impact of sarcopenia on liver transplant outcomes in male HCC patients. Post-transplant muscle loss might assist in prognostic stratification of recipients without pre-existing sarcopenia, intriguing new insights into individualized management.
RESUMEN
Microplastic (MP) load in urban sewage sludge could vary annually in wastewater treatment plants (WWTPs) depending on seasonal precipitation and human activities. We investigated the seasonal dynamics in abundance and characterization of MP loading in WWTPs located in two cities across River Ganga, India's ecologically sensitive upper stretch. During a 12-month seasonal sampling (pre-monsoon, monsoon, and post-monsoon), sludge samples (n = 36) (primary sludge, PS; drying bed sludge, DBS) were collected and analyzed for load, polymer types, shape, colour, and size (20-1000 µm). Across the three seasons, MP concentrations (particles/kg) were found to be in the ranges of 93.4 ± 5.0 × 103-189.4 ± 11 × 103 in the PS and 39.6 ± 4.0 × 103-152.0 ± 7 × 103 in the DBS. The trend of MP loading was in the following order: monsoon > post-monsoon > pre-monsoon. The dominant MP size was 50-200 µm (36.22%) followed by 20-50 µm (27.65%), 200-500 µm (24.55%) and 500-1000 µm (11.58%). ATR-FTIR results revealed polypropylene, polyethylene terephthalate, polyvinyl chloride, and nylon dominating MP in sludge. This study highlights the importance of long-term monitoring of MP loading in sewage sludge to offer a more accurate estimate of MP contamination in sludge from WWTPs and develop a possible mechanism for its elimination to safeguard the environment.
RESUMEN
BACKGROUND: Professional driving requires long hours of work, uncomfortable seats, negotiating rough terrain and highways, and possibly minor repairs and other auxiliary transportation duties. Heavy vehicle drivers driving vehicles such as trucks, bulldozers, etc. due to such working structures are more prone to various musculoskeletal disorders (MSDs) and pain, which is of great concern. OBJECTIVES: In the present study, it is planned to investigate possible ergonomic risk factors such as age, weight, driving exposure, seat suspension systems, lifting heavy weights causing MSDs in drivers of various heavy vehicles. The results of the study are expected to help drivers reduce the risk of MSDs. METHODS: For the present study, the Nordic questionnaire on musculoskeletal disorders was modified and standardized and was administered to the 48 heavy vehicle drivers randomly selected to collect the data. RESULTS: The analysis divulged that over the past 12 months, lower back pain (LBP) emerged as the most dominant pain experienced by 56% of drivers, followed by knee pain (KP) (43%) and neck pain (NP) (39%) respectively. The prevalence of shoulder pain (SP) was observed to be much lower than in previous literature. The logistic regression model further revealed that increasing age, poor suspension system and poor body posture were significantly associated with lower back pain. Additionally, a poor suspension system and lifting heavy weights had significant effect on the drivers' knee pain. CONCLUSION: The results demonstrated the evident necessity for ergonomic consideration in vehicle designing and ergonomic training for heavy vehicle drivers.
RESUMEN
Different grasping gestures result in the change of muscular activity of the forearm muscles. Similarly, the muscular activity changes with a change in grip force while grasping the object. This change in muscular activity, measured by a technique called Electromyography (EMG) is used in the upper limb bionic devices to select the grasping gesture. Previous research studies have shown gesture classification using pattern recognition control schemes. However, the use of EMG signals for force manipulation is less focused, especially during precision grasping. In this study, an early predictive control scheme is designed for the efficient determination of grip force using EMG signals from forearm muscles and digit force signals. The optimal pattern recognition (PR) control schemes are investigated using three different inputs of two signals: EMG signals, digit force signals and a combination of EMG and digit force signals. The features extracted from EMG signals included Slope Sign Change, Willison Amplitude, Auto Regressive Coefficient and Waveform Length. The classifiers used to predict force levels are Random Forest, Gradient Boosting, Linear Discriminant Analysis, Support Vector Machines, k-nearest Neighbors and Decision Tree. The two-fold objectives of early prediction and high classification accuracy of grip force level were obtained using EMG signals and digit force signals as inputs and Random Forest as a classifier. The earliest prediction was possible at 1000 ms from the onset of the gripping of the object with a mean classification accuracy of 90 % for different grasping gestures. Using this approach to study, an early prediction will result in the determination of force level before the object is lifted from the surface. This approach will also result in better biomimetic regulation of the grip force during precision grasp, especially for a population facing vision deficiency.
RESUMEN
Hepatocellular carcinoma (HCC) is one of the most common malignancies and is a major cause of cancer-related mortalities worldwide (Forner et al., 2018; He et al., 2023). Sarcopenia is a syndrome characterized by an accelerated loss of skeletal muscle (SM) mass that may be age-related or the result of malnutrition in cancer patients (Cruz-Jentoft and Sayer, 2019). Preoperative sarcopenia in HCC patients treated with hepatectomy or liver transplantation is an independent risk factor for poor survival (Voron et al., 2015; van Vugt et al., 2016). Previous studies have used various criteria to define sarcopenia, including muscle area and density. However, the lack of standardized diagnostic methods for sarcopenia limits their clinical use. In 2018, the European Working Group on Sarcopenia in Older People (EWGSOP) renewed a consensus on the definition of sarcopenia: low muscle strength, loss of muscle quantity, and poor physical performance (Cruz-Jentoft et al., 2019). Radiological imaging-based measurement of muscle quantity or mass is most commonly used to evaluate the degree of sarcopenia. The gold standard is to measure the SM and/or psoas muscle (PM) area using abdominal computed tomography (CT) at the third lumbar vertebra (L3), as it is linearly correlated to whole-body SM mass (van Vugt et al., 2016). According to a "North American Expert Opinion Statement on Sarcopenia," SM index (SMI) is the preferred measure of sarcopenia (Carey et al., 2019). The variability between morphometric muscle indexes revealed that they have different clinical relevance and are generally not applicable to broader populations (Esser et al., 2019).
Asunto(s)
Carcinoma Hepatocelular , Aprendizaje Profundo , Neoplasias Hepáticas , Sarcopenia , Humanos , Anciano , Sarcopenia/diagnóstico , Sarcopenia/diagnóstico por imagen , Carcinoma Hepatocelular/complicaciones , Carcinoma Hepatocelular/diagnóstico por imagen , Músculo Esquelético/diagnóstico por imagen , Pronóstico , Radiómica , Neoplasias Hepáticas/complicaciones , Neoplasias Hepáticas/diagnóstico por imagen , Estudios RetrospectivosRESUMEN
The objective of this research was to produce the smallest possible ZnO nanoparticles through an adapted wet chemical process and subsequently, to fabricate a core-shell structure utilizing polyethylene glycol (PEG) as the shell component. The synthesis, size, and shape of the NPs were confirmed using advanced techniques. The resulting clustered NPs were round and had a size of 9.8 nm. Both plain and core-shell NPs were tested for their antibacterial properties against multi-drug resistant bacteria strains (E. cloacae, E. amnigenus, S. flexneri, S. odorifacae, Citrobacter, and E. coli), with concentrations of 500, 1000, and 1500 µg ml-1 used for testing. Both types of NPs demonstrated antibacterial activity against the tested pathogens, with the core-shell NPs being more effective. The synthesized NPs were biocompatible with human red blood cells, with a low level of hemolysis observed. The biocompatibility of the core-shell NPs was significantly enhanced by the presence of the PEG added as the shell. In addition, their effectiveness as photosensitizers for cancer treatment via photodynamic therapy (PDT) was evaluated. MTT assay was used to evaluate the cytotoxicity of ZnO and PEG-ZnO, and the results showed that these NPs were able to generate ROS inside tumor cells upon irradiation, leading to apoptosis and cell death, making them a promising candidate for PDT.
RESUMEN
BACKGROUND: Hepatic ischemia-reperfusion (IR) injury is the primary reason for complications following hepatectomy and liver transplantation (LT). Insulin-induced gene 2 (Insig2) is one of several proteins that anchor the reticulum in the cytoplasm and is essential for metabolism and inflammatory responses. However, its function in IR injury remains ambiguous. METHODS: Insig2 global knock-out (KO) mice and mice with adeno-associated-virus8 (AAV8)-delivered Insig2 hepatocyte-specific overexpression were subjected to a 70% hepatic IR model. Liver injury was assessed by monitoring hepatic histology, inflammatory responses, and apoptosis. Hypoxia/reoxygenation stimulation (H/R) of primary hepatocytes and hypoxia model induced by cobalt chloride (CoCl2) were used for in vitro experiments. Multi-omics analysis of transcriptomics, proteomics, and metabolomics was used to investigate the molecular mechanisms underlying Insig2. RESULTS: Hepatic Insig2 expression was significantly reduced in clinical samples undergoing LT and the mouse IR model. Our findings showed that Insig2 depletion significantly aggravated IR-induced hepatic inflammation, cell death and injury, whereas Insig2 overexpression caused the opposite phenotypes. The results of in vitro H/R experiments were consistent with those in vivo. Mechanistically, multi-omics analysis revealed that Insig2 is associated with increased antioxidant pentose phosphate pathway (PPP) activity. The inhibition of glucose-6-phosphate-dehydrogenase (G6PD), a rate-limiting enzyme of PPP, rescued the protective effect of Insig2 overexpression, exacerbating liver injury. Finally, our findings indicated that mouse IR injury could be attenuated by developing a nanoparticle delivery system that enables liver-targeted delivery of substrate of PPP (glucose 6-phosphate). CONCLUSIONS: Insig2 has a protective function in liver IR by upregulating the PPP activity and remodeling glucose metabolism. The supplementary glucose 6-phosphate (G6P) salt may serve as a viable therapeutic target for alleviating hepatic IR.
Asunto(s)
Hepatocitos , Insulinas , Hepatopatías , Daño por Reperfusión , Animales , Ratones , Antioxidantes/metabolismo , Apoptosis/genética , Glucosa/metabolismo , Hepatectomía/efectos adversos , Hepatocitos/metabolismo , Hepatocitos/patología , Hipoxia/complicaciones , Hipoxia/genética , Hipoxia/metabolismo , Insulinas/metabolismo , Hígado/irrigación sanguínea , Hígado/lesiones , Hígado/metabolismo , Hígado/patología , Hepatopatías/genética , Hepatopatías/metabolismo , Hepatopatías/patología , Hepatopatías/cirugía , Trasplante de Hígado/efectos adversos , Fosfatos/metabolismo , Fosfatos/farmacología , Daño por Reperfusión/genética , Daño por Reperfusión/metabolismo , Daño por Reperfusión/patología , Daño por Reperfusión/prevención & controlRESUMEN
[This corrects the article DOI: 10.1039/D3RA02640J.].
RESUMEN
We investigated the physical behavior of SrMO3 (M = Hf and Pt) compounds, which are strontium-based oxide perovskites. We utilized the WIEN2k software to simulate and investigate their physical properties. The structural stability of SrHfO3 and SrPtO3 was verified using the Birch-Murnaghan equation of states for optimization. We also checked the elastic stability through the computation of elastic constants using the IRelast software. Our results indicate the stability of these compounds and showed their anisotropic, ductility, scratch-resistive, and plastic strain-resistant characteristics. Using the TB-mBJ potential approach, we determined that SrHfO3 is an insulator, whereas SrPtO3 is a metal in nature. The density of states computations was used to find the band structure as well as the contribution of different electronic states. Optical property research was conducted using the band gap energies of these substances. Our findings suggest that these crystals have low energy absorption and reflectivity of up to 65%, making them suitable for use in high-frequency UV devices. Specifically, SrHfO3 is more transparent before the energy point 2.80 eV, while the compound SrPtO3 after 6.50 eV to 12.0 eV and SrHfO3 from 12.0 and 14.0 eV. This study represents the first DFT-based investigation of these discussed crystals according to the best of our knowledge.
RESUMEN
To enhance the effectiveness of materials, we are motivated to investigate lithium-based halide perovskites LiRCl3 (where R = Be and Mg) using first-principles techniques based on density functional theory (DFT), implemented in the WIEN2K code. In this study, the research makes use of the WIEN2K simulation code, employing the plane-wave and self-consistent (PWSCF) approach. The cut-off energy, responsible for distinguishing core and valence states, is established at -6.0 Ry. To guarantee well-converged solutions with 2000 K points, parameters of RMT × Kmax = 7.0 are selected, where RMT represents the smallest muffin-tin radius and Kmax denotes the plane wave cut-off. Convergence is determined to be attained when the overall energy of the system remains unchanged during self-consistent calculations, reaching a threshold of 0.001 Ry. We observe structural stability of these materials using the Birch-Murnaghan fit, tolerance factor and formation energy. The tolerance factor for LiMgCl3 and LiBeCl3 are 1.03 and 0.857, while the formation energy for LiMgCl3 and LiBeCl3 are -7.39 eV and -8.92 eV respectively, confirming these to be stable structurally. We evaluate the electronic properties of the current materials, shedding light on their nature, by using the suggested modified Becke-Johnson potential. It turns out that they are indirect insulators, with calculated band gaps of 4.02 and 4.07 eV for LiMgCl3 and LiBeCl3, respectively. For both materials, we also calculate the density of states (DOS), and our findings regarding the band gap energies are consistent with the band structure. It is observed that both materials exhibit transparency to low-energy photons, with absorption and optical conduction occurring in the UV range. These compounds are mechanically stable, according to the elastic investigation, however LiBeCl3 shows higher resistance to compressive and shear loads as well as resistance to shape change. On the other hand, LiMgCl3 exhibits weaker resistance to changes in volume. Furthermore, we discovered that none of the compounds are entirely isotropic, and specifically, LiMgCl3 and LiBeCl3 are brittle in nature. These materials appear to be potential candidates for use in optoelectronic devices based on our analysis of their optical properties. Our findings may provide comprehensive insight, invoking experimental studies for further investigations.
RESUMEN
Microorganisms in the rhizosphere are crucial allies for plant stress tolerance. Recent research suggests that by interacting with the rhizosphere microbiome, microorganisms can aid in the revegetation of soils contaminated with heavy metal(loid)s (HMs). However, it is unknown that how Piriformospora indica influences the rhizosphere microbiome to mitigate arsenic-toxicity in arsenic-enriched environments. Artemisia annua plants were grown in the presence or absence of P. indica and spiked with low (50) and high (150 µmol/L) concentrations of arsenic (As). After inoculation with P. indica, fresh weight increased by 37.7% and 10% in control and high concentration treated plants, respectively. Transmission electron microscopy showed that cellular organelles were severely damaged by As and even disappeared under high concentration. Furthermore, As was mostly accumulated by 5.9 and 18.1 mg/kg dry weight in the roots of inoculated plants treated with low and high concentrations of As, respectively. Additionally, 16 S and ITS rRNA gene sequencing were applied to analyze the rhizosphere microbial community structure of A. annua under different treatments. A significant difference was observed in microbial community structure under different treatments as revealed by non-metric multidimensional scaling ordination. The bacterial and fungal richness and diversity in the rhizosphere of inoculated plants were actively balanced and regulated by P. indica co-cultivation. Lysobacter and Steroidobacter were found to be the As-resistant bacterial genera. We conclude that P. indica inoculation could alter rhizosphere microecology, thereby mitigating As-toxicity without harming the environment.
Asunto(s)
Arsénico , Artemisia annua , Microbiota , Arsénico/toxicidad , Artemisia annua/genética , Artemisia annua/microbiología , Raíces de Plantas/microbiología , Bacterias , Rizosfera , Microbiología del SueloRESUMEN
Herein, the optoelectronic, structural, thermoelectric, and elastic characteristics of M2LiCeF6 (M = Rb and Cs) double perovskite compounds were investigated using ab initio modeling in the DFT framework. The Birch-Murnaghan fitting curve used for the optimization showed that these two compounds are structurally stable. The elastic properties of the M2LiCeF6 (M = Rb and Cs) double perovskite compounds were examined using the IRelast code. The results showed that these two compounds possess mechanical stability, anisotropy, and toughness, and offer resistance to plastic deformation. The precise and accurate determination of their electronic properties was achieved via the Trans-Blaha-modified Becke-Johnson (TB-mBJ) approximation. The Rb2LiCeF6 and Cs2LiCeF6 compounds are narrow band gap semiconductors with band gaps of 0.6 eV and 0.8 eV at the high symmetrical points from (Γ-M), respectively, exhibiting an indirect nature. To further understand how the various states contribute to the different band structures, total and partial density of state (DOS) computations were performed. The optical properties in the energy range of 0-40 eV for Rb2LiCeF6 and Cs2LiCeF6 were explored. The selected materials show transparency in the low incident photon energy range and have large light absorption and transmission at higher photon energies. Thus, it can be concluded that Rb2LiCeF6 and Cs2LiCeF6 can be used in high-frequency UV devices based on their optical characteristics. Both materials exhibit high electrical conductivity, power factors, and figures of merit (ZT) and act as effective thermoelectric resources. To the best of our knowledge, this is the first theoretical research on the optoelectronic, structural, thermoelectric, and elastic features of M2LiCeF6 (M = Rb and Cs).
RESUMEN
This work describes an ab initio principle computational examination of the optical, structural, elastic, electronic and mechanical characteristics of aluminum-based compounds AlRF3 (R = N, P) halide-perovskites. For optimization purposes, we used the Birch-Murnaghan equation of state and discovered that the compounds AlNF3 and AlPF3 are both structurally stable. The IRelast software was used to compute elastic constants (ECs) of the elastic properties. The aforementioned compounds are stable mechanically. They exhibit strong resistance to plastic strain, possess ductile nature and anisotropic behavior and are scratch-resistant. The modified Becke-Johnson (Tb-mBJ) approximation was adopted to compute various physical properties, revealing that AlNF3 and AlPF3 are both metals in nature. From the density of states, the support of various electronic states in the band structures are explained. Other various optical characteristics have been calculated from the investigations of the band gap energy of the aforementioned compounds. These compounds absorb a significant amount of energy at high levels. At low energy levels, the compound AlNF3 is transparent to incoming photons, whereas the compound AlPF3 is somewhat opaque. The examination of the visual details led us to the deduction that the compounds AlNF3 and AlPF3 may be used in making ultraviolet devices based on high frequency. This computational effort is being made for the first time in order to investigate the aforementioned properties of these chemicals, which have yet to be confirmed experimentally.
RESUMEN
Objective: The aim of this study was to determine the effect of Forsus Fatigue Resistant Device (FRD) appliance on craniofacial structures, bite force and periodontal status in Class II malocclusion patients. Methods: In this prospective interventional follow-up study, thirteen (13) Class II Division 1 patients in their post-adolescent age group with average age of 17.10 ± 1.63 year was treated with Forsus FRD. They were assessed for craniofacial changes, bite force and periodontal status at baseline, after alignment and leveling, after removal of FRD. Results: Improvement in soft tissue profile was due to significant dentoalveolar changes. There were significant decreases in overjet, overbite, reference line to upper first molar, H angle (p<0.001) and significant increases in upper lip to E-line, reference line to lower molar and angular measurements like nasolabial angle, U1 to SN plane, Incisor Mandibular Plane Angle (p<0.001). The bite force was significantly decreased on the molar and the incisor region (p<0.001). A significant increase in plaque index (PI), gingival index (GI), probing pocket depth was noticed without any significant clinical attachment loss. Conclusion: Class II correction with Forsus FRD appliance was mainly due to significant dentoalveolar changes. Skeletal changes were non-significant. A decrease in the bite force was found with FRD. The magnitude of bite force was more in males compared with females. The increase in GI, PI, pocket probing depth implies the necessity of oral hygiene and plaque control measures. However, there was no significant change in clinical attachment level.
RESUMEN
The incidence of hepatocellular carcinoma (HCC) associated with extrahepatic primary malignancy (EHPM) is extremely rare, especially for those that involve primary renal cell carcinoma (PRC). Here we present a case of a 66-year-old male who was diagnosed with HCC complicated with lymph node metastasis at posterior pancreas head and PRC. Biopsy results of the liver and the lymph node confirmed the diagnosis of HCC. The disease progressions of both HCC and PRC are controlled effectively following the initiation of comprehensive therapy including pembrolizumab, lenvatinib, radiotherapy, and transcatheter arterial chemo-embolization (TACE). Ultimately, the patient had successfully access to surgery and complete response (CR) of all the tumors were achieved after surgery.
RESUMEN
This study presents the investigations of structural, elastic, optical, and electronic properties of CaQCl3 (Q = Li and K) chloroperovskites for the first time using the DFT framework. The WIEN2K and IRelast packages are used in which the exchange-correlation potential of the modified Becke-Johnson potential (TB-mBJ) is used for obtaining better results. The optimized crystal structural parameters comprising the lattice constant, optimum volume, ground state energy, bulk modulus, and the pressure derivative of bulk modulus are computed by fitting the primitive unit cell energy versus primitive unit cell volume using the Birch-Murnaghan equation of state. The elastic properties which consist of cubic elastic constants, Poisson's ratio, elastic moduli, anisotropy factor, and the Pugh ratio are computed using the very precise IRelast package incorporated inside WIEN2K. The electronic properties are analyzed from the computation of electronic bands structure and density of states (DOS), and it is concluded that an indirect band gap of 4.6 eV exists for CaLiCl3 and a direct band gap of 3.3 eV for CaKCl3 which confirms that CaLiCl3 is an insulator while CaKCl3 is a wide band gap semiconductor. The analysis of DOS shows that the greater contribution to the conduction band (CB) occurs because of the "Ca" element whereas in the valence band the major contribution is from the "Cl" element. The spectral curves of various parameters of optical properties from 0 eV up to 42 eV incident photon energies are observed and it is found that the CaQCl3 (Q = Li and K) chloroperovskites are optically active having a high absorption coefficient, optical conductivity, optical reflectivity, and energy loss function from 25 eV to 35 eV incident photon energies. The applications of these materials can be deemed to alter or control electromagnetic radiation in the ultraviolet (UV) spectral regions. In summary, the results for selected CaQCl3 (Q = Li and K) chloroperovskites depict that these are important compounds and can be used as scintillators, and energy storage devices, and in many modern electronic gadgets.
RESUMEN
The interface debonding in carbon fiber-reinforced polymers is analyzed and evaluated using the extended finite element method (XFEM). In order to accurately evaluate the bonding properties between fibers and matrix, different tests were carried out, including the multiple tests for different orientations to study longitudinal, transversal, and shear properties of unidirectional carbon fiber-reinforced composites. Extensive experimentation has been performed in all the different groups and categories with different dimensions and parameters in order to ascertain the values of strength and the prediction of the damage to the structure. The experimental and numerical comparison provided significant trends and data to evaluate the mechanical properties of the interface. The values of stiffness and strength are compared and validated. Development of Representative Volume Element (RVE) for progressive damage model to these damage phenomena has already been performed as a feasibility study for the model, though it is not included in this particular paper. The results of this research for all the experimental and numerical sets can serve as reliable data in the microsimulation of devices and sensitive parameters that include carbon fiber-reinforced light metal matrix composites and makes a better investigative model that contributes to various conditions. It further offers an investigation of the microscopic deformation mechanisms in the composites.
RESUMEN
Whole exome sequencing has provided significant opportunities to discover novel candidate genes for intellectual disability and autism spectrum disorders. Variants in the spectrin genes SPTAN1, SPTBN1, SPTBN2, and SPTBN4 have been associated with neurological disorders; however, SPTBN5 gene-variants have not been associated with any human disorder. This is the first report that associates SPTBN5 gene variants (ENSG00000137877: c.266A>C; p.His89Pro, c.9784G>A; p.Glu3262Lys, c.933C>G; p.Tyr311Ter, and c.8809A>T; p.Asn2937Tyr) causing neurodevelopmental phenotypes in four different families. The SPTBN5-associated clinical traits in our patients include intellectual disability (mild to severe), aggressive tendencies, accompanied by variable features such as craniofacial and physical dysmorphisms, autistic behavior, and gastroesophageal reflux. We also provide a review of the existing literature related to other spectrin genes, which highlights clinical features partially overlapping with SPTBN5.
RESUMEN
Seven derivatives of 1-phenyl ethyl group containing 3,5-disubstituted tetrahydro-2H-1,3,5-thiadiazine-thiones (THTT) were prepared and examined for their antibacterial and antifungal properties by using Microplate Alamar Blue Assay (MABA) and agar tube dilution protocol respectively. In vitro antifungal potential was investigated against five human pathogens and compared with the standard drugs amphotericin B and miconazole. In vitro antibacterial activity was investigated against four pathogens and compared with the ofloxacin. All compounds exhibited very promising antifungal activities against all tested pathogens. Structure activity relationship showed the importance of the presence of 1-phenyl ethyl substituent at N-3 of THTT nucleus for antifungal effects. However, these compounds showed significant antibacterial activity only against S. aureus. The compound 6c of the series was found most active compound that displayed promising antifungal potential against all tested pathogens [Growth Inhibition (GI) = 100%], and also showed promising antibacterial potential against S. aureus (GI% = 83.49) which is very much closer to the standard ofloxacin (GI% = 88.05). The study may be useful in the development of improved antimicrobial agents.
Asunto(s)
Antiinfecciosos , Tiadiazinas , Antibacterianos/farmacología , Antiinfecciosos/química , Antiinfecciosos/farmacología , Antifúngicos/química , Antifúngicos/farmacología , Humanos , Pruebas de Sensibilidad Microbiana , Ofloxacino , Staphylococcus aureus , Relación Estructura-Actividad , Tiadiazinas/química , Tiadiazinas/farmacología , Tiazinas , Tionas/química , Tionas/farmacologíaRESUMEN
In this research work, the Tl-based fluoroperovskite compounds TlLF3 (L = Ca, Cd) were investigated computationally using density functional theory (DFT) to comprehend their structural, elastic, optical, and electronic properties. Computation of the tolerance factor and Birch-Murnaghan curve indicated that the compounds are cubic and structurally stable. The structurally optimized lattice constants and the optimum volume corresponding to the optimum energy were measured. Elastic properties were predicted using the IRelast package, and the results showed that the compounds of interest are mechanically stable, ductile, and anisotropic in nature. The electronic properties (band structures and density of states) show that TlCaF3 and TlCdF3 possess a wide direct bandgap from (X-X) symmetry points of 5.7 eV and 5.6 eV, respectively. The contributions of different elemental states to the valence and conduction bands are evaluated from the total and partial density of states (TDOS & PDOS). Analysis of the optical properties showed that these compounds possess a high refractive index, absorption coefficient, and reflectivity at high energy ranges. The values of the direct bandgap indicated that these compounds are expected to be semiconducting in nature, and their use is primarily considered to be in the semiconductor industries and optoelectronic devices. These compounds are new and have been investigated for the first time using the computational approach, which provides comprehensive insight into their different properties; based on the results, they are recommended as industrial candidates.