RESUMEN
A neuromorphic system is composed of hardware-based artificial neurons and synaptic devices, designed to improve the efficiency of neural computations inspired by energy-efficient and parallel operations of the biological nervous system. A synaptic device-based array can compute vector-matrix multiplication (VMM) with given input voltage signals, as a non-volatile memory device stores the weight information of the neural network in the form of conductance or capacitance. However, unlike software-based neural networks, the neuromorphic system unavoidably exhibits non-ideal characteristics that can have an adverse impact on overall system performance. In this study, the characteristics required for synaptic devices and their importance are discussed, depending on the targeted application. We categorize synaptic devices into two types: conductance-based and capacitance-based, and thoroughly explore the operations and characteristics of each device. The array structure according to the device structure and the VMM operation mechanism of each structure are analyzed, including recent advances in array-level implementation of synaptic devices. Furthermore, we reviewed studies to minimize the effect of hardware non-idealities, which degrades the performance of hardware neural networks. These studies introduce techniques in hardware and signal engineering, as well as software-hardware co-optimization, to address these non-idealities through compensation approaches.
RESUMEN
In this study, we demonstrate the implementation of programmable threshold logics using a 32 × 32 memristor crossbar array. Thanks to forming-free characteristics obtained by the annealing process, its accurate programming characteristics are presented by a 256-level grayscale image. By simultaneous subtraction between weighted sum and threshold values with a differential pair in an opposite way, 3-input and 4-input Boolean logics are implemented in the crossbar without additional reference bias. Also, we verify a full-adder circuit and analyze its fidelity, depending on the device programming accuracy. Lastly, we successfully implement a 4-bit ripple carry adder in the crossbar and achieve reliable operations by read-based logic operations. Compared to stateful logic driven by device switching, a 4-bit ripple carry adder on a memristor crossbar array can perform more reliably in fewer steps thanks to its read-based parallel logic operation.
RESUMEN
We propose a hardware-friendly architecture of a convolutional neural network using a 32 × 32 memristor crossbar array having an overshoot suppression layer. The gradual switching characteristics in both set and reset operations enable the implementation of a 3-bit multilevel operation in a whole array that can be utilized as 16 kernels. Moreover, a binary activation function mapped to the read voltage and ground is introduced to evaluate the result of training with a boundary of 0.5 and its estimated gradient. Additionally, we adopt a fixed kernel method, where inputs are sequentially applied to a crossbar array with a differential memristor pair scheme, reducing unused cell waste. The binary activation has robust characteristics against device state variations, and a neuron circuit is experimentally demonstrated on a customized breadboard. Thanks to the analogue switching characteristics of the memristor device, the accurate vector-matrix multiplication (VMM) operations can be experimentally demonstrated by combining sequential inputs and the weights obtained through tuning operations in the crossbar array. In addition, the feature images extracted by VMM during the hardware inference operations on 100 test samples are classified, and the classification performance by off-chip training is compared with the software results. Finally, inference results depending on the tolerance are statistically verified through several tuning cycles.