RESUMEN
Amphiphilic nanogels (ANGs) are promising carriers for hydrophobic cargos such as drugs, dyes, and catalysts. Loading content and release kinetics of these compounds are controlled by type and number of hydrophobic groups in the amphiphilic copolymer network. Thus, understanding the interactions between cargo and colloidal carrier is mandatory for a tailor-made and cargo-specific ANG design. To systematically explore the influence of the network composition on these interactions, we prepared a set of ANGs of different amphiphilicity and loaded these ANGs with varying concentrations of the solvatochromic dye Nile Red (NR). Here, NR acts as a hydrophobic model cargo to optically probe the polarity of its microenvironment. Analysis of the NR emission spectra as well as measurements of the fluorescence quantum yields and decay kinetics revealed a decrease in the polarity of the NR microenvironment with increasing hydrophobicity of the hydrophobic groups in the ANG network and dye-dye interactions at higher loading concentrations. At low NR concentrations, the hydrophobic cargo NR is encapsulated in the hydrophobic domains. Increasing NR concentrations resulted in probe molecules located in a more hydrophilic environment, i.e., at the nanodomain border, and favored dye-dye interactions and NR aggregation. These results correlate well with release experiments, indicating first NR release from more hydrophilic network locations. Overall, our findings demonstrate the importance to understand carrier-drug interactions for efficient loading and controlled release profiles in amphiphilic nanogels.
RESUMEN
Proteins have gained significant attention as potential therapeutic agents owing to their high specificity and reduced toxicity. Nevertheless, their clinical utility is hindered by inherent challenges associated with stability during storage and after in vivo administration. To overcome these limitations, polymeric nanogels (NGs) have emerged as promising carriers. These colloidal systems are capable of efficient encapsulation and stabilization of protein cargoes while improving their bioavailability and targeted delivery. The design of such delivery systems requires a comprehensive understanding of how the synthesis and formulation processes affect the final performance of the protein. This review highlights critical aspects involved in the development of NGs for protein delivery, with specific emphasis on loading strategies and evaluation techniques. For example, factors influencing loading efficiency and release kinetics are discussed, along with strategies to optimize protein encapsulation through protein-carrier interactions to achieve the desired therapeutic outcomes. The discussion is based on recent literature examples and aims to provide valuable insights for researchers working toward the advancement of protein-based therapeutics.
Asunto(s)
Portadores de Fármacos , Polímeros , Nanogeles , Proteínas , Sistemas de Liberación de Medicamentos/métodosRESUMEN
Post-assembly modifications are efficient tools to adjust colloidal features of block copolymer (BCP) particles. However, existing methods often address particle shape, morphology, and chemical functionality individually. For simultaneous control, we transferred the concept of seeded polymerization to phase separated BCP particles. Key to our approach is the regioselective polymerization of (functional) monomers inside specific BCP domains. This was demonstrated in striped PS-b-P2VP ellipsoids. Here, polymerization of styrene preferably occurs in PS domains and increases PS lamellar thickness up to 5-fold. The resulting asymmetric lamellar morphology also changes the particle shape, i.e., increases the aspect ratio. Using 4-vinylbenzyl azide as co-monomer, azides as chemical functionalities can be added selectively to the PS domains. Overall, our simple and versatile method gives access to various multifunctional BCP colloids from a single batch of pre-formed particles.
RESUMEN
Solvent annealing is a versatile tool to adjust the shape and morphology of block copolymer (BCP) particles. During this process, polar solvents are often used for block-selective swelling. However, such water-miscible solvents can induce (partial) solubilization of one block in the surrounding aqueous medium, thus, causing complex structural variations and even particle disassembly. To reduce the complexity in morphology control, we focused on toluene as a nonpolar polystyrene-selective solvent for the annealing of striped polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) ellipsoids. The selective stretching of PS chains produces unique asymmetric lamellae structures, which translate to an increase in the particle aspect ratio after toluene evaporation. Complete reversibility is achieved by changing to chloroform as a nonselective solvent. Moreover, surfactants can be used to tune block-selective wetting of the particle surface during the annealing; for example, a PS shell can protect the internal lamellae structure from disassembly. Overall, this versatile postassembly process enables the tailoring of the structural features of striped colloidal ellipsoids by only using commercial BCPs and solvents.
RESUMEN
Amphiphilic nanogels (NGs) combine a soft, water-swollen hydrogel matrix with internal hydrophobic domains. While these domains can encapsulate hydrophobic cargoes, the amphiphilic particle surface can reduce colloidal stability and/or limit biological half-life. Therefore, a functional hydrophilic shell is needed to shield the amphiphilic network and tune interactions with biological systems. To adjust core and shell properties independently, we developed a synthetic strategy that uses preformed dual-reactive nanogels. In a first step, emulsion copolymerization of pentafluorophenyl methacrylate (PFPMA) and a reduction-cleavable crosslinker produced precursor particles for subsequent network modification. Orthogonal shell reactivity was installed by using an amphiphilic block copolymer (BCP) surfactant during this particle preparation step. Here, the hydrophilic block poly(polyethylene glycol methyl ether methacrylate) (PPEGMA) contains a reactive alkyne end group for successive functionalization. The hydrophobic block (P(PFPMA-co-MAPMA) contains random methacryl-amido propyl methacrylamide (MAPMA) units to covalently attach the surfactant to the growing PPFPMA network. In the second step, orthogonal modification of the core and shell was demonstrated. Network functionalization with combinations of hydrophilic (acidic, neutral, or basic) and hydrophobic (cholesterol) groups gave a library of pH- and redox-sensitive amphiphilic NGs. Stimuli-responsive properties were demonstrated by pH-dependent swelling and reduction-induced degradation via dynamic light scattering. Subsequently, copper-catalyzed azide-alkyne cycloaddition was used to attach azide-modified rhodamine as model compound to the shell (followed by UV-Vis). Overall, this strategy provides a versatile platform to develop multi-functional amphiphilic nanogels as carriers for hydrophobic cargoes.
Asunto(s)
Azidas , Tensoactivos , Alquinos , Interacciones Hidrofóbicas e Hidrofílicas , Nanogeles , Tensoactivos/químicaRESUMEN
Polymeric nanogels are promising nonirritating nanocarriers for topical delivery applications. However, conventional hydrophilic networks limit encapsulation of hydrophobic therapeutics and hinder tailored interactions with the amphiphilic skin barrier. To address these limitations, we present amphiphilic nanogels containing hydrophilic networks with hydrophobic domains. Two competing factors determine favorable nanogel-skin interactions and need to be balanced through network composition: suitable surface hydrophobicity and low network rigidity (through physical hydrophobic cross-links). To ensure comparability in such investigations, we prepared a library of nanogels with increasing hydrophobic cholesteryl amounts but similar colloidal features. By combining mechanical and surface hydrophobicity tests (atomic force microscopy (AFM)) with dermal delivery experiments on excised human skin, we can correlate an increased delivery efficacy of Nile red to the viable epidermis with a specific network composition, i.e., 20-30 mol % cholesterol. Thus, our nanogel library identifies a specific balance between surface amphiphilicity and network rigidity to guide developments of advanced dermal delivery vehicles.
Asunto(s)
Polietilenglicoles , Polietileneimina , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Nanogeles , Polietilenglicoles/químicaRESUMEN
Among polymeric nanocarriers, nanogels are especially promising non-irritating delivery vehicles to increase dermal bioavailability of therapeutics. However, accurately tailoring defined interactions with the amphiphilic skin barrier is still challenging. To address this limited specificity, we herein present a new strategy to combine biocompatible nanogels with the outstanding skin interaction properties of sulfoxide moieties. These chemical motifs are known from dimethyl sulfoxide (DMSO), a potent chemical penetration enhancer, which can often cause undesired skin damage upon long-term usage. By covalently functionalizing the nanogels' polymer network with such methyl sulfoxide side groups, tailor-made dermal delivery vehicles are developed to circumvent the skin disrupting properties of the small molecules. Key to an effective nanogel-skin interaction is assumed to be the specific nanogel amphiphilicity. This is examined by comparing the delivery efficiency of sulfoxide-based nanogels (NG-SOMe) with their corresponding thioether (NG-SMe) and sulfone-functionalized (NG-SO2Me) analogues. We demonstrate that the amphiphilic sulfoxide-based NG-SOMe nanogels are superior in their interaction with the likewise amphipathic stratum corneum (SC) showing an increased topical delivery efficacy of Nile red (NR) to the viable epidermis (VE) of excised human skin. In addition, toxicological studies on keratinocytes and fibroblasts show good biocompatibility while no perturbation of the complex protein and lipid distribution is observed via stimulated Raman microscopy. Thus, our NG-SOMe nanogels show high potential to effectively emulate the skin penetration enhancing properties of DMSO without its negative side effects.
Asunto(s)
Dimetilsulfóxido , Piel , Humanos , Nanogeles , Polímeros/metabolismo , Piel/metabolismo , Absorción CutáneaRESUMEN
OBJECTIVE: Coronary complications may present during or after repair of congenital heart defects. We report coronary artery bypass grafting (CABG) by internal thoracic artery (ITA) grafts to either coronary artery in children with congenital anomalies. METHODS: Four cases who underwent CABG with ITA grafts from March 2016 to March 2020 were retrospectively reviewed. RESULTS: At the time of operation, patient's ages and weight were 7 and 20 months old and 14 and 15 years old and 6.5, 10, 40, and 45 kg, respectively. Diagnosis were anomalous origin of the left coronary artery from the pulmonary artery with leftward lateral ostial origin (n = 1), neopulmonary annulus hypoplasia post arterial switch with contiguous right coronary artery (RCA) arising from the left facing sinus (n = 1), RCA stenosis after the Ross procedure (n = 1), and right coronary ostial obstruction after aortic valve replacement in truncus arteriosus (n = 1). Procedures included left ITA to left coronary ostium (n = 1), right ventricular outflow tract (RVOT) enlargement with pulmonary valve replacement with left ITA to RCA (n = 1), RVOT enlargement with pulmonary valve replacement with right ITA to RCA (n = 1), and aortic valve re-replacement, pulmonary valve replacement, and right ITA to RCA (n = 1). At last follow-up, all four patients were asymptomatic, with normal ventricular function, and all grafts were patent. CONCLUSIONS: The use of CABG in children is valuable alternative when dealing with complex coronary anatomy not suitable for classic repairs. In children, graft patency is required to be longer than 50 years; therefore, use of arterial grafts seems mandatory.
Asunto(s)
Procedimientos Quirúrgicos Cardíacos/métodos , Puente de Arteria Coronaria/métodos , Vasos Coronarios/cirugía , Cardiopatías Congénitas/cirugía , Arterias Mamarias/trasplante , Adolescente , Angiografía , Vasos Coronarios/diagnóstico por imagen , Femenino , Cardiopatías Congénitas/diagnóstico , Humanos , Lactante , Masculino , Reoperación , Estudios RetrospectivosRESUMEN
BACKGROUND: Pleomorphic xanthoastrocytomas (PXAs) are uncommon intradural and typically intramedullary astrocytic central nervous system tumors. Although they commonly occur supratentorially, they are rarely seen in the spine. CASE DESCRIPTION: A 43-year-old male presented with cervical neck pain and right-sided radicular symptoms. He was found to have an intradural extramedullary mass at the C5-C6 level. The lesion was fully excised and proved to be a PXA. Of interest, the lesion did not recur on postoperative MR imaging studies obtained 7 months later. CONCLUSION: While rare, primary intradural extramedullary spinal PXA has been reported. Here, we review such a lesion occurring in a 43-year-old male who did well following gross total excision of the tumor.
RESUMEN
Amphiphilic polymer nanogels (NGs) are promising drug delivery vehicles that extend the application of conventional hydrophilic NGs to hydrophobic cargoes. By randomly introducing hydrophobic groups into a hydrophilic polymer network, loading and release profiles as well as surface characteristics of these colloids can be tuned. However, very little is known about the underlying internal structure of such complex colloidal architectures. Of special interest is the question how the amphiphilic network composition influences the internal morphology and the "fuzzy" surface structure. To shine light into the influence of varying network amphiphilicity on these structural features, we investigated a small library of water-swollen amphiphilic NGs using small-angle X-ray scattering (SAXS). It was found that overall hydrophilic NGs, consisting of pure poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA), display a disordered internal structure as indicated by the absence of a SAXS peak. In contrast, a SAXS peak is present for amphiphilic NGs with various amounts of incorporated hydrophobic groups such as cholesteryl (CHOLA) or dodecyl (DODA). The internal composition of the NGs is considered structurally homologous to microgels. Application of the Teubner-Strey model reveals that hydrophilic PHPMA NGs have a disordered internal structure (positive amphiphilicity factor) while CHOLA and DODA samples have an ordered internal structure (negative amphiphilicity factor). From the SAXS data it can be derived that the internal structure of the amphiphilic NGs consists of regularly alternating hydrophilic and hydrophobic domains with repeat distances of 3.45-5.83 nm.
RESUMEN
OBJECTIVE: To present a strategy for identifying patients at risk of lymphatic failure in the setting of planned Fontan/Kreutzer completion, allowing a tailored surgical approach. METHODS: Since January 2017, clinical evaluation before performance of the Fontan/Kreutzer procedure included T2-weighted magnetic resonance imaging (MRI) lymphangiography. Thoracic lymphatic abnormalities were categorized using a scale of I to IV according to progression of severity. Patients with severe lymphatic abnormalities (types III and IV) underwent Fontan/Kreutzer with lymphatic decompression via connection of the left jugular-subclavian junction containing the thoracic duct to the systemic atrium (group A). RESULTS: Thirteen patients were enrolled. Magnetic resonance imaging showed type I abnormalities in four cases (30.7%), II in four (30.7%), III in two (15.3%), and IV in three (23.3%). Patients in types III and IV underwent a Fontan/Kreutzer with lymphatic decompression (group A, n = 5), while patients in types I and II underwent a fenestrated extracardiac Fontan/Kreutzer procedure without lymphatic decompression (group B, n = 8). Preoperatively, there were no differences in age, weight, ventricular dominance (right vs left), superior vena cava pressure, incidence of chylothorax after previous superior cavopulmonary anastomosis (Glenn), or need for concomitant procedures at Fontan/Kreutzer completion. There were no differences in procedural times between the groups, nor were there differences in mortalities and Fontan/Kreutzer takedowns. There were no statistically significant differences in early and late morbidity between the two groups with the exception of total volume of effusions output postoperatively. At median follow-up of 18 months (range, 4-28 months), all patients in group A are in New York Heart Association class 1 with no differences between groups in arterial oxygen saturation. CONCLUSIONS: Lymphatic decompression during Fontan/Kreutzer procedure was successfully performed in patients identified by MRI as predisposed to lymphatic failure. A larger cohort of patients and longer follow-up are required to determine the efficacy of this approach in preventing early- and long-term Fontan/Kreutzer failure.
Asunto(s)
Procedimiento de Fontan/métodos , Atrios Cardíacos/cirugía , Puente Cardíaco Derecho , Cardiopatías Congénitas/cirugía , Vena Cava Superior/cirugía , Adolescente , Niño , Preescolar , Descompresión , Femenino , Cardiopatías Congénitas/diagnóstico por imagen , Humanos , Imagen por Resonancia Magnética , Masculino , Resultado del Tratamiento , Vena Cava Superior/diagnóstico por imagen , Adulto JovenRESUMEN
BACKGROUND AND PURPOSE: Nanogels (NGs) are promising drug delivery tools but are typically limited to hydrophilic drugs. Many potential new drugs are hydrophobic. Our study systematically investigates amphiphilic NGs with varying hydrophobicity, but similar colloidal features to ensure comparability. The amphiphilic NGs used in this experiment consist of a hydrophilic polymer network with randomly distributed hydrophobic groups. For the synthesis we used a new synthetic platform approach. Their amphiphilic character allows the encapsulation of hydrophobic drugs. Importantly, the hydrophilic/hydrophobic balance determines drug loading and biological interactions. In particular, protein adsorption to NG surfaces is dependent on hydrophobicity and critically determines circulation time. Our study investigates how network hydrophobicity influences protein binding, biocompatibility and cellular uptake. METHODS: Biocompatibility of the NGs was examined by WST-1 assay in monocytic-like THP-1 cells. Serum protein corona formation was investigated using dynamic light scattering and two-dimensional gel electrophoresis. Proteins were identified by liquid chromatography-tandem mass spectrometry. In addition, cellular uptake was analyzed via flow cytometry. RESULTS: All NGs were highly biocompatible. The protein binding patterns for the two most hydrophobic NGs were very similar to each other but clearly different from the hydrophilic ones. Overall, protein binding was increased with increasing hydrophobicity, resulting in increased cellular uptake. CONCLUSION: Our study supports the establishment of structure-property relationships and contributes to the accurate balance between maximum loading capacity with low protein binding, optimal biological half-life and good biocompatibility. This is an important step to derive design principles of amphiphilic NGs to be applied as drug delivery vehicles.
Asunto(s)
Materiales Biocompatibles/farmacología , Endocitosis , Geles/química , Interacciones Hidrofóbicas e Hidrofílicas , Nanopartículas/química , Corona de Proteínas/química , Tensoactivos/química , Adsorción , Supervivencia Celular/efectos de los fármacos , Análisis por Conglomerados , Humanos , Monocitos/efectos de los fármacos , Monocitos/metabolismo , Nanopartículas/ultraestructura , Tamaño de la Partícula , Células THP-1RESUMEN
The functional properties of colloidal materials can be tailored by tuning the shape of their constituent particles. Unfortunately, a reliable, general methodology for purifying colloidal materials solely based on shape is still lacking. Here we exploit the single-particle analysis and sorting capabilities of the fluorescence-activated cell sorting (FACS) instrument, a commonly used tool in biomedical research, and demonstrate the ability to separate mixtures of synthetic microparticles based solely on their shape with high purity. We achieve this by simultaneously obtaining four independent optical scattering signals from the FACS instrument to create shape-specific 'scattering signatures' that can be used for particle classification and sorting. We demonstrate that these four-dimensional signatures can overcome the confounding effects of particle orientation on shape-based characterization. Using this strategy, robust discrimination of particles differing only slightly in shape and an efficient selection of desired shapes from mixtures comprising particles of diverse sizes and materials is demonstrated.
RESUMEN
INTRODUCTION: The binocular operating microscope has been the visualization instrument of choice for microsurgical clipping of intracranial aneurysms for many decades. OBJECTIVE: To discuss recent technological advances that have provided novel visualization tools, which may prove to be superior to the binocular operating microscope in many regards. METHODS: We present an operative video and our operative experience with the BrightMatterTM Servo System (Synaptive Medical, Toronto, Ontario, Canada) during the microsurgical clipping of an anterior communicating artery aneurysm. To the best of our knowledge, the use of this device for the microsurgical clipping of an intracranial aneurysm has never been described in the literature. RESULTS: The BrightMatterTM Servo System (Synaptive Medical) is a surgical exoscope which avoids many of the ergonomic constraints of the binocular operating microscope, but is associated with a steep learning curve. The BrightMatterTM Servo System (Synaptive Medical) is a maneuverable surgical exoscope that is positioned with a directional aiming device and a surgeon-controlled foot pedal. While utilizing this device comes with a steep learning curve typical of any new technology, the BrightMatterTM Servo System (Synaptive Medical) has several advantages over the conventional surgical microscope, which include a relatively unobstructed surgical field, provision of high-definition images, and visualization of difficult angles/trajectories. CONCLUSION: This device can easily be utilized as a visualization tool for a variety of cranial and spinal procedures in lieu of the binocular operating microscope. We anticipate that this technology will soon become an integral part of the neurosurgeon's armamentarium.
Asunto(s)
Aneurisma Intracraneal/cirugía , Microcirugia/métodos , Procedimientos Neuroquirúrgicos/métodos , Procedimientos Quirúrgicos Robotizados/métodos , Femenino , Humanos , Persona de Mediana Edad , Resultado del TratamientoRESUMEN
Well-defined steroid hormone dimers and organogels were produced via a facile and scalable synthesis using oxime click chemistry. The versatile synthetic procedure extends to a wide range of hormones and linker groups exemplified here through the synthesis of cortisol- and progesterone-dimers linked via hydrophobic, hydrophilic or functional groups. This method was also extended to the synthesis of cortisone-based organogels. Owing to the dynamic nature of the oxime bond, the hormone-based materials are degradable via acidic hydrolysis and transoximination representing new materials for the controlled release of steroid hormones.
Asunto(s)
Hormonas/síntesis química , Oximas/química , Dimerización , Geles/síntesis química , Geles/química , Hormonas/química , Conformación MolecularRESUMEN
Spinal vascular malformations (SVMs) are a heterogeneous group that can cause acute, subacute, or chronic spinal cord dysfunction. The majority of the patients present to neurosurgical attention after a protracted course with severe neurological dysfunction. Spinal vascular lesions comprise approximately 3-4 % of all intradural spinal lesions. They are pathologically similar to their intracranial counterparts, but their clinical impact is often comparatively worse. Early, correct recognition of the pathology is mandatory to halt the progression of the disease and minimize permanent spinal cord injury. The first clinical observation of a SVM was published in 1890, but it was not until 1914 that the first successful surgical treatment of a spinal vascular malformation was reported. Intervention-either by microsurgical or endovascular means-aims to halt or reverse the progressive neurological deterioration by eliminating flow through the abnormal fistulous or nidal connections, and restoring normal spinal cord perfusion and intravascular pressures. In fact, complex spinal arteriovenous malformations (AVMs) and arteriovenous fistulas (AVFs) frequently require a multimodality approach that utilizes both microsurgery and endovascular embolization effectively. The goal of this review is to describe the various types of vascular malformations of the spine, their pathophysiology, clinical presentation, treatment strategies, and outcome. For purposes of discussion on the current manuscript, vascular malformations of the spine were divided into arteriovenous fistulas (AVFs) and arteriovenous malformations (AVMs). Spinal cord aneurysms are extremely rare, and the majority of the lesions that come to the neurosurgeon's attention are concomitant to a spinal AVM.
Asunto(s)
Fístula Arteriovenosa/cirugía , Malformaciones Arteriovenosas/cirugía , Malformaciones Vasculares del Sistema Nervioso Central/cirugía , Duramadre/cirugía , Médula Espinal/cirugía , Fístula Arteriovenosa/diagnóstico , Malformaciones Arteriovenosas/diagnóstico , Malformaciones Vasculares del Sistema Nervioso Central/diagnóstico , Duramadre/patología , Humanos , Médula Espinal/patología , Resultado del TratamientoRESUMEN
Solution-exchange lithography is a new modular approach to engineer surfaces via sequential photopatterning. An array of lenses reduces features on an inkjet-printed photomask and reproduces arbitrarily complex patterns onto surfaces. In situ exchange of solutions allows successive photochemical reactions without moving the substrate and affords access to hierarchically patterned substrates.
RESUMEN
Well-defined microgel particles were prepared by combining coacervate-driven cross-linking of ionic triblock copolymers with the ability to control particle size and encapsulate functional cargos inherent in microfluidic devices. In this approach, the efficient assembly of PEO-based triblock copolymers with oppositely charged end-blocks allows for bioinspired cross-linking under mild conditions in dispersed aqueous droplets. This strategy enables the integration of charged cargos into the coacervate domains (e.g., the loading of anionic model compounds through electrostatic association with cationic end-blocks). Distinct release profiles can be realized by systematically varying the chemical nature of the payload and the microgel dimensions. This mild and noncovalent assembly method represents a promising new approach to tunable microgels as scaffolds for colloidal biomaterials in therapeutics and regenerative medicine.