(De)sodiation Mechanism of Bi2MoO6 in Na-Ion Batteries Probed by Quasi-Simultaneous Operando PDF and XAS.

Operando characterization can reveal degradation processes in battery materials and are essential for the development of battery chemistries. This study reports the first use of quasi-simultaneous operando pair distribution function (PDF) and X-ray absorption spectroscopy (XAS) of a battery cell, providing a detailed, atomic-level understanding of the cycling mechanism of Bi2MoO6 as an anode material for Na-ion batteries. This material cycles via a combined conversion-alloying reaction, where electrochemically active, nanocrystalline Na x Bi particles embedded in an amorphous Na-Mo-O matrix are formed during the first sodiation. The combination of operando PDF and XAS revealed that Bi obtains a positive oxidation state at the end of desodiation, due to formation of Bi-O bonds at the interface between the Bi particles and the Na-Mo-O matrix. In addition, XAS confirmed that Mo has an average oxidation state of +6 throughout the (de)sodiation process and, thus, does not contribute to the capacity. However, the local environment of Mo6+ changes from tetrahedral coordination in the desodiated state to distorted octahedral in the sodiated state. These structural changes are linked to the poor cycling stability of Bi2MoO6, as flexibility of this matrix allows movement and coalescence of the Na x Bi particles, which is detrimental to the electrochemical stability.

Unraveling the (De)sodiation Mechanisms of BiFeO3 at a High Rate with Operando XRD.

Development of new anode materials for Na-ion batteries strongly depends on a detailed understanding of their cycling mechanism. Due to instrumental limitations, the majority of mechanistic studies focus on operando materials' characterization at low cycling rates. In this work, we evaluate and compare the (de)sodiation mechanisms of BiFeO3 in Na-ion batteries at different current densities using operando X-ray diffraction (XRD) and ex situ X-ray absorption spectroscopy (XAS). BiFeO3 is a conversion-alloying anode material with a high initial sodiation capacity of ∼600 mAh g-1, when cycled at 0.1 A g-1. It does not change its performance or cycling mechanism, except for minor losses in capacity, when the current density is increased to 1 A g-1. In addition, operando XRD characterization carried out over multiple cycles shows that the Bi ⇋ NaBi (de)alloying reaction and the oxidation of Bi at the interface with the Na-Fe-O matrix are detrimental for cycling stability. The isolated NaBi ⇋ Na3Bi reaction is less damaging to the cycling stability of the material.

Replica exchange molecular dynamics for Li-intercalation in graphite: a new solution for an old problem.

Li intercalation and graphite stacking have been extensively studied because of the importance of graphite in commercial Li-ion batteries. Despite this attention, there are still questions about the atomistic structures of the intermediate states that exist during lithiation, especially when phase dynamics cause a disordered Li distribution. The Li migration event (diffusion coefficient of 10-5 nm2 ns-1) makes it difficult to explore the various Li-intercalation configurations in conventional molecular dynamics (MD) simulations with an affordable simulation timescale. To overcome these limitations, we conducted a comprehensive study using replica-exchange molecular dynamics (REMD) in combination with the ReaxFF force field. This approach allowed us to study the behavior of Li-intercalated graphite from any starting arrangement of Li at any value of x in LixC6. Our focus was on analyzing the energetic favorability differences between the relaxed structures. We rationalized the trends in formation energy on the basis of observed structural features, identifying three main structural features that cooperatively control Li rearrangement in graphite: Li distribution, graphite stacking mode and gallery height (graphene layer spacing). We also observed a tendency for clustering of Li, which could lead to dynamic local structures that approximate the staging models used to explain intercalation into graphite.

Operando XRD studies on Bi2MoO6as anode material for Na-ion batteries.

Based on the same rocking-chair principle as rechargeable Li-ion batteries, Na-ion batteries are promising solutions for energy storage benefiting from low-cost materials comprised of abundant elements. However, despite the mechanistic similarities, Na-ion batteries require a different set of active materials than Li-ion batteries. Bismuth molybdate (Bi2MoO6) is a promising NIB anode material operating through a combined conversion/alloying mechanism. We report anoperandox-ray diffraction (XRD) investigation of Bi2MoO6-based anodes over 34 (de)sodiation cycles revealing both basic operating mechanisms and potential pathways for capacity degradation. Irreversible conversion of Bi2MoO6to Bi nanoparticles occurs through the first sodiation, allowing Bi to reversibly alloy with Na forming the cubic Na3Bi phase. Preliminary electrochemical evaluation in half-cellsversusNa metal demonstrated specific capacities for Bi2MoO6to be close to 300 mAh g-1during the initial 10 cycles, followed by a rapid capacity decay.OperandoXRD characterisation revealed that the increased irreversibility of the sodiation reactions and the formation of hexagonal Na3Bi are the main causes of the capacity loss. This is initiated by an increase in crystallite sizes of the Bi particles accompanied by structural changes in the electronically insulating Na-Mo-O matrix leading to poor conductivity in the electrode. The poor electronic conductivity of the matrix deactivates the NaxBi particles and prevents the formation of the solid electrolyte interface layer as shown by post-mortem scanning electron microscopy studies.

Stoichiometry-Controlled Reversible Lithiation Capacity in Nanostructured Silicon Nitrides Enabled by in Situ Conversion Reaction.

In modern Li-based batteries, alloying anode materials have the potential to drastically improve the volumetric and specific energy storage capacity. For the past decade silicon has been viewed as a "Holy Grail" among these materials; however, severe stability issues limit its potential. Herein, we present amorphous substoichiometric silicon nitride (SiNx) as a convertible anode material, which allows overcoming the stability challenges associated with common alloying materials. Such material can be synthesized in a form of nanoparticles with seamlessly tunable chemical composition and particle size and, therefore, be used for the preparation of anodes for Li-based batteries directly through conventional slurry processing. Such SiNx materials were found to be capable of delivering high capacity that is controlled by the initial chemical composition of the nanoparticles. They exhibit an exceptional cycling stability, largely maintaining structural integrity of the nanoparticles and the complete electrodes, thus delivering stable electrochemical performance over the course of 1000 charge/discharge cycles. Such stability is achieved through the in situ conversion reaction, which was herein unambiguously confirmed by pair distribution function analysis of cycled SiNx nanoparticles revealing that active silicon domains and a stabilizing Li2SiN2 phase are formed in situ during the initial lithiation.

Anodes for Li-ion batteries prepared from microcrystalline silicon and enabled by binder's chemistry and pseudo-self-healing.

Silicon, while suffering from major degradation issues, has been recognized as a next promising material to replace currently used graphite in the anodes of Li-ion batteries. Several pathways to mitigate the capacity fading of silicon has been proposed, including optimization of the electrode composition. Within the present work we evaluated different binder formulations to improve the long-term performance of the Li-ion batteries' anodes based on industrial grade silicon (Si) which is typically characterized by a particle sizes ranging from 100 nm to 5.5 microns. The decrease of pH in a binder formulation was found to detrimental for the cycling performance of Si due to enhanced formation of an ester-type bonding between the carboxylic group of the binder and hydroxyl group on the Si surface as well as cross-linking. Furthermore, the present work was focused on the use of the industrial grade Si with very high loading of Si material (up to 80% by weight) to better highlight the effects of the surface chemistry of Si and its influence on the performance of Si-based anodes in Li-ion batteries. The tested system allowed to establish a pseudo self-healing effect that manifests itself through the restoration of the anode capacity by approximately 25% and initiates after approximately 20 cycles. The stabilization of the capacity is attributed to self-limiting lithiation process. Such effect is closely related to SEI formation and transport properties of an electrode prepared from silicon of industrial grade.

Morphology engineering of silicon nanoparticles for better performance in Li-ion battery anodes.

Amorphous silicon nanoparticles were synthesized through pyrolysis of silane gas at temperatures ranging from 575 to 675 °C. According to the used temperature and silane concentration, two distinct types of particles can be obtained: at 625 °C, spherical particles with smooth surface and a low degree of aggregation, but at a higher temperature (650 °C) and lower silane concentration, particles with extremely rough surfaces and high degree of aggregation are found. This demonstrates the importance of the synthesis temperature on the morphology of silicon particles. The two types of silicon nanoparticles were subsequently used as active materials in a lithium half cell configuration, using LiPF6 in an alkylcarbonate-based electrolyte, in order to investigate the impact of the particles morphology on the cycling performances of silicon anode material. The difference in morphology of the particles resulted in different volume expansions, which impacts the solid electrolyte interface (SEI) formation and, as a consequence, the lifetime of the electrode. Half-cells fabricated from spherical particles demonstrated almost 70% capacity retention for over 300 cycles, while the cells made from the rough, aggregated particles showed a sharp decrease in capacity after the 20th cycle. The cycling results underline the importance of Si particle engineering and its influence on the lifetime of Si-based materials.

Heavily doped n-type PbSe and PbS nanocrystals using ground-state charge transfer from cobaltocene.

Colloidal nanocrystals (NCs) of lead chalcogenides are a promising class of tunable infrared materials for applications in devices such as photodetectors and solar cells. Such devices typically employ electronic materials in which charge carrier concentrations are manipulated through "doping;" however, persistent electronic doping of these NCs remains a challenge. Here, we demonstrate that heavily doped n-type PbSe and PbS NCs can be realized utilizing ground-state electron transfer from cobaltocene. This allows injecting up to eight electrons per NC into the band-edge state and maintaining the doping level for at least a month at room temperature. Doping is confirmed by inter- and intra-band optical absorption, as well as by carrier dynamics. Finally, FET measurements of doped NC films and the demonstration of a p-n diode provide additional evidence that the developed doping procedure allows for persistent incorporation of electrons into the quantum-confined NC states.

Role of solvent-oxygen ion pairs in photooxidation of CdSe nanocrystal quantum dots.

Understanding the mechanisms for photodegradation of nanocrystal quantum dots is an important step toward their application in real-world technologies. A usual assumption is that photochemical modifications in nanocrystals, such as their photooxidation, are triggered by absorption of a photon in the dot itself. Here, we demonstrate that, contrary to this commonly accepted picture, nanocrystal oxidation can be initiated by photoexcitation of solvent-oxygen ion pairs that relax to produce singlet oxygen, which then reacts with the nanocrystals. We make this conclusion on the basis of photolysis studies of solutions of CdSe nanocrystals. Our measurements indicate a sharp spectral onset for photooxidation, which depends on solvent identity and is 4.8 eV for hexane and 3.4 eV for toluene. Importantly, the photooxidation onset correlates with the position of a new optical absorption feature, which develops in a neat solvent upon its exposure to oxygen. This provides direct evidence that nanocrystal photooxidation is mediated by excitation of solvent-oxygen pairs and suggests that the stability of the nanocrystals is defined by not only the properties of their surfaces (as has been commonly believed) but also the properties of their environment, that is, of the surrounding solvent or matrix.

Formation of assemblies comprising Ru-polypyridine complexes and CdSe nanocrystals studied by ATR-FTIR spectroscopy and DFT modeling.

The interaction between CdSe nanocrystals (NCs) passivated with trioctylphosphine oxide (TOPO) ligands and a series of Ru-polypyridine complexes-[Ru(bpy)(3)](PF(6))(2) (1), [Ru(bpy)(2)(mcb)](PF(6))(2) (2), [Ru(bpy)(mcb)(2)](BarF)(2) (3), and [Ru(tpby)(2)(dcb)](PF(6))(2) (4) (where bpy = 2,2'-bipyridine, mcb = 4-carboxy-4'-methyl-2,2'-bipyridine, tbpy = 4,4'-di-tert-butyl-2,2'-bipyridine; dcb = 4,4'-dicarboxy-2,2'-bipyridine, and BarF = tetrakis[3,5-bis(trifluoromethyl)phenyl]borate)-was studied by attenuated total reflectance FTIR (ATR-FTIR) and modeled using density functional theory (DFT). ATR-FTIR studies reveal that when the solid film of NCs is exposed to an acetonitrile solution of 2, 3, or 4, the complexes chemically bind to the NC surface through their carboxylic acid groups, replacing TOPO ligands. The corresponding spectral changes are observed on a time scale of minutes. In the case of 2, the FTIR spectral changes clearly show that the complex adsorption is associated with a loss of proton from the carboxylic acid group. In the case of 3 and 4, deprotonation of the anchoring group is also detected, while the second, "spectrator" carboxylic acid group remains protonated. The observed energy difference between the symmetric, ν(s), and asymmetric, ν(as), stretch of the deprotonated carboxylic acid group suggests that the complexes are bound to the NC surface via a bridging mode. The results of DFT modeling are consistent with the experiment, showing that for the deprotonated carboxylic acid group the coupling to two Cd atoms via a bridging mode is the energetically most favorable mode of attachment for all nonequivalent NC surface sites and that the attachment of the protonated carboxylic acid is thermodynamically significantly less favorable.

Effect of organic passivation on photoinduced electron transfer across the quantum dot/TiO2 interface.

We report a study of the internal quantum efficiency (IQE) of CdSe quantum-dot (QD)-sensitized solar cells prepared by direct adsorption of pre-synthesized QDs, passivated with either tri-n-octylphosphine oxide (TOPO) or n-butylamine (BA), onto a nanocrystalline TiO(2) film.

CdSe quantum-dot-sensitized solar cell with ∼100% internal quantum efficiency.

We have constructed and studied photoelectrochemical solar cells (PECs) consisting of a photoanode prepared by direct deposition of independently synthesized CdSe nanocrystal quantum dots (NQDs) onto a nanocrystalline TiO(2) film (NQD/TiO(2)), aqueous Na(2)S or Li(2)S electrolyte, and a Pt counter electrode. We show that light harvesting efficiency (LHE) of the NQD/TiO(2) photoanode is significantly enhanced when the NQD surface passivation is changed from tri-n-octylphosphine oxide (TOPO) to 4-butylamine (BA). In the PEC the use of NQDs with a shorter passivating ligand, BA, leads to a significant enhancement in both the electron injection efficiency at the NQD/TiO(2) interface and charge collection efficiency at the NQD/electrolyte interface, with the latter attributed mostly to a more efficient diffusion of the electrolyte through the pores of the photoanode. We show that by utilizing BA-capped NQDs and aqueous Li(2)S as an electrolyte, it is possible to achieve ∼100% internal quantum efficiency of photon-to-electron conversion, matching the performance of dye-sensitized solar cells.

Effect of air exposure on surface properties, electronic structure, and carrier relaxation in PbSe nanocrystals.

Effects of air exposure on surface properties, electronic structure, and carrier relaxation dynamics in colloidal PbSe nanocrystals (NCs) were studied using X-ray photoelectron spectroscopy, transmission electron microscopy, and steady-state and time-resolved photoluminescence (PL) spectroscopies. We show that exposure of NC hexane solutions to air under ambient conditions leads to rapid oxidation of NCs such that up to 50% of their volume is transformed into PbO, SeO2, or PbSeO3 within 24 h. The oxidation is a thermally activated process, spontaneous at room temperature. The oxidation-induced reduction in the size of the PbSe "core" increases quantum confinement, causing shifts of the PL band and the absorption onset to higher energies. The exposure of NC solutions to air also causes rapid (within minutes) quenching of PL intensity followed by slow (within hours) recovery during which the PL quantum yield can reach values exceeding those observed prior to the air exposure. The short-term PL quenching is attributed to enhanced carrier trapping induced by adsorption of oxygen onto the NC surface, while the PL recovery at longer times is predominantly due to reduction in the efficiency of the "intrinsic" nonradiative interband recombination caused by the increase of the band gap in oxidized NCs. Although the analysis of subnanosecond relaxation dynamics in air-exposed NCs is complicated by a significant enhancement in fast carrier trapping, our picosecond PL measurements suggest that air exposure likely has only a weak effect on Auger recombination and also does not significantly affect the efficiency of carrier multiplication. We also show that the effects of air exposure are partially suppressed in PbSe/CdSe core/shell structures.

Self-assembly of hydroxy(phenyl)iodonium ions in acidic aqueous solution: preparation, and X-ray crystal structures of oligomeric phenyliodine(III) sulfates.

The treatment of [(diacetoxy)iodo]benzene with sodium bisulfate leads to the formation of oligomeric cationic species resulting from self-assembly of hydroxy(phenyl)iodonium ions, [PhIOH](+), in an aqueous acidic media. Depending on the PhI(OAc)(2):NaHSO(4) ratio, three new oligomeric products have been isolated and characterized by X-ray crystallography. The treatment of 5 equiv of PhI(OAc)(2) with 1 equiv of NaHSO(4).H(2)O affords the previously unknown mu-oxo-[bis(acetoxy)iodo]benzene, PhI(OAc)OI(OAc)Ph, which was structurally characterized by X-ray crystallography. In the solid-state, this mu-oxo product forms an isolated diamond-core dimeric structure with pentagonal-planar iodine centers. The interaction of PhI(OAc)(2) with 1 equiv of NaHSO(4).H(2)O affords a solid-state polymeric phenyliodine(III) sulfate, [(PhIO)(3).SO(3)](n), in which bis(mu-oxo)triiodanyl dication repeat units are linked by sulfate anions. Three of these neighboring polymeric chains form pseudo triple-helix supramolecular structure, which translates along crystallographic b-axis. The reaction of PhI(OAc)(2) with 3 equiv of NaHSO(4).H(2)O results in the formation of a tetrameric phenyliodine(III) sulfate, PhI(OH)OSO(2)O(Ph)IOI(Ph)OSO(2)OI(OH)Ph, the solid state structure of which consists of mu-oxodiiodanyl dicationic species linked by sulfate anions to the terminal hydroxy(phenyl)iodonium groups. The pseudo double-helix structure of this compound formed by the strong intermolecular interactions between two neighbor mu-oxodiiodanyl dicationic fragments and four (per pseudo helix dimer) areas of sulfate anions to the terminal hydroxy(phenyl)iodonium groups interactions.

Preparation, characterization, and circularly polarized luminescence of lanthanum and europium 1,1'-binaphthyl-2,2'-diyl phosphate complexes.

Solvated tris-complexes of (R)- and (S)-1,1'-binaphthyl-2,2'-dyil phosphate with lanthanum(III) and europium(III) centers were prepared and characterized by spectroscopic methods and elemental analysis. Circularly polarized luminescence (CPL) spectra for the optically active isomers of the europium complexes are also reported.

Preparation, characterization, molecular and electronic structures, TDDFT, and TDDFT/PCM study of the solvatochromism in cyanovinylferrocenes.

Cis and trans isomers of ferrocene-based donor-acceptor assemblies, Fc-C(I)=CH(I), Fc-C(I)=CH(CN), and Fc-C(CN)=CH(CN) (Fc is ferrocene), along with the Fc-C(CN)=C(CN)2 complex have been prepared and characterized by 1H, 13C, gHMQC, and gHMBC NMR spectra, IR, UV-vis, and MCD spectroscopy methods, as well as elemental analyses. The oxidation potentials, investigated by cyclic voltammetry, of all donor-acceptor assemblies are in agreement with the electron-acceptor strength of the substituents attached to the ferrocene core. X-ray crystallography studies of cis and trans isomers of Fc-C(I)=CH(CN) and Fc-C(CN)=CH(CN) reveal a significant rotational flexibility of the cyanovinyl group, which was explained on the basis of semiempirical PM3 calculations. Electronic structures and solvatochromic properties of all complexes were investigated by UV-vis spectroscopy, density functional theory (DFT), time-dependent DFT (TDDFT), and polarized continuum model (PCM) TDDFT approaches. The calculated vertical excitation energies and magnitudes of solvatochromic effect are consistent with the experimental data and clearly suggest the dominance of metal-to-ligand charge-transfer bands in the visible region of the UV-vis spectra for all complexes.

Mixed-valence states formation in conformationally flexible metal-free 5,10,15,20-tetraferrocenylporphyrin and 5,10-bisferrocenyl-15,20-bisphenylporphyrin.

Metal-free 5,10,15,20-tetraferrocenylporphyrin and 5,10-bisferrocenyl-15,20-bisphenylporphyrin have been prepared and characterized by UV-Vis, MCD, (1)H, (13)C, and variable-temperature NMR, APCI- and ESI-MS, and Mössbauer spectroscopy, while their redox properties were investigated using electrochemical (cyclic voltammetry and differential pulse voltammetry), spectroelectrochemical, and chemical oxidation approaches. The electronic structure calculations at Density Functional Theory level reveal that both compounds adopt saddle conformations and the HOMOs in both complexes are predominantly metal-centered, while the LUMOs predominantly consist of porphyrin pi* orbitals. In spite of the rotational freedom of ferrocenyl substituents at room temperature, both metal-free 5,10,15,20-tetraferrocenylporphyrin and 5,10-bisferrocenyl-15,20-bisphenylporphyrin are able to form mixed-valence states upon the successive ferrocene-based two- and one-electron oxidations, respectively, as confirmed by UV-Vis, MCD, Mössbauer, electro-, and spectroelectrochemical methods, and thus, the earlier suggested (Boyd et al. Chem. Commun., 1999, 637) requirements for the formation of mixed-valence states in ferrocene-containing porphyrins should be revised.

RuCl3-catalyzed oxidation of iodoarenes with peracetic acid: new facile preparation of iodylarenes.

New facile methodology for the preparation of pentavalent iodine compounds using peracetic acid as an oxidant in the presence of catalytic amounts of ruthenium trichloride is described. The new procedure allows the preparation of several previously unknown iodylarenes bearing strongly electron-withdrawing CF3 groups in the aromatic ring.

2-iodylphenol ethers: preparation, X-ray crystal structure, and reactivity of new hypervalent iodine(V) oxidizing reagents.

2-Iodylphenol ethers were prepared by the dimethyldioxirane oxidation of the corresponding 2-iodophenol ethers and isolated as chemically stable, microcrystalline products. Single-crystal X-ray diffraction analysis of 1-iodyl-2-isopropoxybenzene 8c and 1-iodyl-2-butoxybenzene 8d revealed pseudopolymeric arrangements in the solid state formed by intermolecular interactions between IO2 groups of different molecules. 2-Iodylphenol ethers can selectively oxidize sulfides to sulfoxides and alcohols to the respective aldehydes or ketones.