Online monitoring of methane transfer rates unveils nitrogen fixation dynamics in Methylococcus capsulatus.

This study explores methane utilization by the methanotrophic microorganism Methylococcus capsulatus (Bath) for biomass production, presenting a promising approach to mitigate methane emissions and foster the development sustainable biomaterials. Traditional screening methods for gas cultivations involve either serum flasks without online monitoring or costly, low-throughput fermenters. To address these limitations, the Respiration Activity MOnitoring System was augmented with methane sensors for real-time methane transfer rate (MTR) monitoring in shake flasks. Utilizing online monitoring of the MTR in shake flasks results in enhanced throughput and cost-effectiveness for cultivating M. capsulatus. Simultaneous monitoring of transfer rates for oxygen, methane, and carbon dioxide was conducted in up to eight shake flasks, ensuring the success of the cultivation process. Alterations in methane-to-oxygen transfer rate ratios and carbon fixation rates reveal the impact of transfer limitations on microbial growth. Detection of gas transfer limitations, exploration of process parameter influences, and investigations of medium components were enabled by the introduced method. Optimal nitrogen concentrations could be determined to ensure optimal growth. This streamlined approach accelerates the screening process, offering efficient investigations into metabolic effects, limitations, and parameter influences in gas fermentations without the need for elaborate offline sampling, significantly reducing costs and enhanced reproducibility.

Carbon dioxide and trace oxygen concentrations impact growth and product formation of the gut bacterium Phocaeicola vulgatus.

BACKGROUND: The promising yet barely investigated anaerobic species Phocaeicola vulgatus (formerly Bacteroides vulgatus) plays a vital role for human gut health and effectively produces organic acids. Among them is succinate, a building block for high-value-added chemicals. Cultivating anaerobic bacteria is challenging, and a detailed understanding of P. vulgatus growth and metabolism is required to improve succinate production. One significant aspect is the influence of different gas concentrations. CO2 is required for the growth of P. vulgatus. However, it is a greenhouse gas that should not be wasted. Another highly interesting aspect is the sensitivity of P. vulgatus towards O2. In this work, the effects of varying concentrations of both gases were studied in the in-house developed Respiratory Activity MOnitoring System (RAMOS), which provides online monitoring of CO2, O2, and pressure under gassed conditions. The RAMOS was combined with a gas mixing system to test CO2 and O2 concentrations in a range of 0.25-15.0 vol% and 0.0-2.5 vol%, respectively. RESULTS: Changing the CO2 concentration in the gas supply revealed a CO2 optimum of 3.0 vol% for total organic acid production and 15.0 vol% for succinate production. It was demonstrated that the organic acid composition changed depending on the CO2 concentration. Furthermore, unrestricted growth of P. vulgatus up to an O2 concentration of 0.7 vol% in the gas supply was proven. The viability decreased rapidly at concentrations larger than or equal to 1.3 vol% O2. CONCLUSIONS: The study showed that P. vulgatus requires little CO2, has a distinct O2 tolerance and is therefore well suited for industrial applications.

Device for respiration activity measurement enables the determination of oxygen transfer rates of microbial cultures in shaken 96-deepwell microtiter plates.

Mini-bioreactors with integrated online monitoring capabilities are well established in the early stages of process development. Mini-bioreactors fulfil the demand for high-throughput-applications and a simultaneous reduction of material costs and total experimental time. One of the most essential online monitored parameters is the oxygen transfer rate (OTR). OTR-monitoring allows fast characterization of bioprocesses and process transfer to larger scales. Currently, OTR-monitoring on a small-scale is limited to shake flasks and 48-well microtiter plates (MTP). Especially, 96-deepwell MTP are used for high-throughput-experiments during early-stage bioprocess development. However, a device for OTR monitoring in 96-deepwell MTP is still not available. To determine OTR values, the measurement of the gas composition in each well of a MTP is necessary. Therefore, a new micro(µ)-scale Transfer rate Online Measurement device (µTOM) was developed. The µTOM includes 96 parallel oxygen-sensitive sensors and a single robust sealing mechanism. Different organisms (Escherichia coli, Hansenula polymorpha, and Ustilago maydis) were cultivated in the µTOM. The measurement precision for 96 parallel cultivations was 0.21 mmol·L-1 ·h-1 (pooled standard deviation). In total, a more than 15-fold increase in throughput and an up to a 50-fold decrease in media consumption, compared with the shake flask RAMOS-technology, was achieved using the µTOM for OTR-monitoring.

Automated tangential-flow diafiltration device.

Tangential flow filtration (TFF) is a chemical unit operation used to purify and concentrate liquid suspensions of colloids, proteins, or cells. The solution flows tangentially across a membrane, such that a selective part of the fluid permeates the membrane while the filtrated matter is retained, increasing its concentration. TFF is a mild mechanical purification method that does not interact chemically with the filtrate. It is applied in sensitive separation tasks in protein chemistry, microbiology, or immunology. It is a fast alternative for dialysis applications, also applicable in the field of colloid purification. However, the costs of automated lab-scale devices (30,000 €) and the consumable membrane modules (100-600 €) make TFF currently hardly accessible for lab-scale polymer researchers. Therefore, we built a low-cost TFF system (2400 €) partly automated by an Arduino microcontroller and optimized for diafiltration buffer exchange and concentration processes in soft matter colloid research. We use medical hemodialysis membrane modules that only cost a share (20-50 €) of alternative TFF modules, and we demonstrate the functionality of the system for an exemplary colloidal microgel purification process.