RESUMEN
A new photocatalyst bismuth oxo citrate was synthesized by facile precipitation process with calcination at 200 °C. The photocatalyst was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, N2 sorptometry, and elemental analysis. Morphologically, it is composed of polyhedral particles with different, irregular shapes and sizes. The specific surface area (SSA) of the photocatalyst was 8.92 m2 g-1. It showed very good photocatalytic performance and reusability. Total decolorization of Reactive Blue 19 (RB19) was achieved in less than 10 minutes, which is much faster in comparison with TiO2 P25. Also, bismuth oxo citrate showed higher photocatalytic activity than other photocatalysts based on bismuth compounds reported by other authors. Optimal photocatalysis parameters were pH 2 and photocatalyst dose of 250 mg dm-3. The decolorization rate was found to decrease as initial dye concentration increased. The photocatalytic data best fitted to L-H kinetic model with pseudo-first order reaction rate. Chrastil diffusion model showed that diffusion has not influence on the process.
Asunto(s)
Bismuto/química , Procesos Fotoquímicos , Antraquinonas/química , Catálisis , Concentración de Iones de Hidrógeno , Microscopía Electrónica de Rastreo , Propiedades de Superficie , Factores de TiempoRESUMEN
A new biosorbent, abbreviated as LVB-ZrO2, was synthesized by chemically modifying Lagenaria vulgaris shell with ZrO2. The removal of textile dye RB19 from aqueous solution by LVB-ZrO2was studied. Characterization by SEM, FTIR and XRD confirmed the chemical modification of the biomaterial, which showed significant improvement of removal efficiency compared with unmodified Lagenaria vulgaris shell. LVB-ZrO2point of zero charge is 5.49. The biosorption process is highly pH dependent and the optimal pH is 2.0, at which complete dye removal was attained. The results are the best by a pseudo-second order kinetic model. The optimal adsorbent dosage is 4 mg/dm³.The RB19 biosorption follows the Langmuir isotherm model (R² = 0.9978), with the maximum sorption capacity of 75.12 mg/g. LVB-ZrO2is a mechanically stable, easy to synthesize, cost-effective, biocompatible and environmentally-friendly biosorbent with the high potential for the removal of RB19 from aqueous solution.