Fabrication and Optimization of Electrospun Shellac Fibers Loaded with Senna alata Leaf Extract.

Single-fluid electrospinning creates nanofibers from molten polymer solutions with active ingredients. This study utilized a combination of a fractional factorial design and a Box-Behnken design to examine crucial factors among a multitude of parameters and to optimize the electrospinning conditions that impact fiber mats' morphology and the entrapment efficiency of Senna alata leaf extract. The findings indicated that the shellac content had the greatest impact on both fiber diameter and bead formation. The optimum electrospinning conditions were identified as a voltage of 24 kV, a solution feed rate of 0.8 mL/h, and a shellac-extract ratio of 38.5:3.8. These conditions produced nanosized fibers with a diameter of 306 nm, a low bead-to-fiber ratio of 0.29, and an extract entrapment efficiency of 96% within the fibers. The biphasic profile of the optimized nanofibers was confirmed with an in vitro release study. This profile consisted of an initial burst release of 88% within the first hour, which was succeeded by a sustained release pattern surpassing 90% for the next 12 h, as predicted with zero-order release kinetics. The optimized nanofibers demonstrated antimicrobial efficacy against diverse pathogens, suggesting promising applications in wound dressings and protective textiles.

Advances in Natural Product Extraction Techniques, Electrospun Fiber Fabrication, and the Integration of Experimental Design: A Comprehensive Review.

The present review explores the growing interest in the techniques employed for extracting natural products. It emphasizes the limitations of conventional extraction methods and introduces superior non-conventional alternatives, particularly ultrasound-assisted extraction. Characterization and quantification of bioactive constituents through chromatography coupled with spectroscopy are recommended, while the importance of method development and validation for biomarker quantification is underscored. At present, electrospun fibers provide a versatile platform for incorporating bioactive extracts and have extensive potential in diverse fields due to their unique structural and functional characteristics. Thus, the review also highlights the fabrication of electrospun fibers containing bioactive extracts. The preparation of biologically active extracts under optimal conditions, including the selection of safe solvents and cost-effective equipment, holds promising potential in the pharmaceutical, food, and cosmetic industries. Integration of experimental design into extraction procedures and formulation development is essential for the efficient production of health products. The review explores potential applications of encapsulating natural product extracts in electrospun fibers, such as wound healing, antibacterial activity, and antioxidant properties, while acknowledging the need for further exploration and optimization in this field. The findings discussed in this review are anticipated to serve as a valuable resource for the processing industry, enabling the utilization of affordable and environmentally friendly, natural, and raw materials.

Preparation of Bioactive De-Chlorophyll Rhein-Rich Senna alata Extract.

Senna alata leaves display various biological activities as a result of their rhein and phenolic composition. The objective of this study was to develop bioactive de-chlorophyll rhein-rich S. alata extracts. The rhein content was quantified using a validated high-performance liquid chromatography-diode array detection (HPLC-DAD) method. The best process parameters for maximizing rhein were established using ultrasound-assisted extraction (UAE). The optimal conditions for the parameters were determined using the Box-Behnken design (BBD); 95% v/v ethanol was used as the extraction solvent at 59.52 °C for 18.4 min with a solvent-to-solid ratio of 25.48:1 (mL/g) to obtain the predicted value of rhein at 10.44 mg/g extract. However, the color of the rhein-rich extract remained dark brown. For the removal of chlorophyll, liquid-liquid extraction with vegetable oils and adsorption with bleaching agents were employed. The bleaching agents were significantly more effective at removing chlorophyll and had less of an effect on the reduction in rhein content than vegetable oils. The presence of rhein and phenolics in the de-chlorophyll extracts might be responsible for their antioxidant, anti-inflammatory, and antibacterial activities. These findings indicate that rhein-rich extract and its de-chlorophyll extracts possess sufficient biological activities for the further development of cosmeceuticals and pharmaceuticals.

Optimization of Ultrasound-Assisted Extraction of Yields and Total Methoxyflavone Contents from Kaempferia parviflora Rhizomes.

The major bioactive components of Kaempferia parviflora (KP) rhizomes, 3,5,7,3',4'-pentamethoxyflavone (PMF), 5,7-dimethoxyflavone (DMF), and 5,7,4'-trimethoxyflavone (TMF), were chosen as the quantitative and qualitative markers for this plant material. In order to extract bioactive components (total methoxyflavones) from KP rhizomes, ultrasound-assisted extraction (UAE) was proposed as part of this study. Plackett-Burman design (PBD) and Box-Behnken design (BBD) were utilized to optimize the effects of UAE on extraction yields and total methoxyflavone contents in KP rhizomes. First, PBD was utilized to determine the effect of five independent variables on total yields and total methoxyflavone contents. The results indicated that the concentration of the extracting solvent (ethanol), the extraction time, and the ratio of solvent to solid were significant independent terms. Subsequently, BBD with three-level factorial experiments was used to optimize the crucial variables. It was discovered that the concentration of ethanol was the most influential variable on yields and total methoxyflavone contents. Optimum conditions for extraction yield were ethanol concentration (54.24% v/v), extraction time (25.25 min), and solvent-to-solid ratio (49.63 mL/g), while optimum conditions for total methoxyflavone content were ethanol concentration (95.00% v/v), extraction time (15.99 min), and solvent-to-solid ratio (50.00 mL/g). The relationship between the experimental and theoretical values was perfect, which proved that the regression models used were correct and that PBD and BBD were used to optimize the conditions in the UAE to obtain the highest yield and total methoxyflavone content in the KP rhizomes.

Fabrication, Optimization, and Characterization of Antibacterial Electrospun Shellac Fibers Loaded with Kaempferia parviflora Extract.

This study aimed to develop a Kaempferia parviflora (KP) extract based on electrospun shellac fibers capable of transporting methoxyflavones. This study used a Box-Behnken design to determine the optimal production parameters that influence the fiber diameter and bead-to-fiber ratio responses. The optimization step produced fibers with a small diameter (574 nm) and a lower bead-to-fiber ratio (0.48 beads per fiber) by combining 37.25% w/w shellac and 1.50% w/w KP extract with a solution feed rate of 0.8 mL/h and an electrical voltage of 18 kV. The KP extract was found to be dispersed throughout the electrospun shellac fibers during the characterization study. The results were highly correlated with the theoretical values, indicating that the regression models used to predict the response variables were adequate. A study of in vitro dissolution confirmed that KP extract-loaded electrospun shellac fibers could produce a sustained-release profile within 10 h. Additionally, KP-infused shellac fibers demonstrated antibacterial activity against Staphylococcus aureus. This KP loading method combined with shellac properties provided a new delivery system and could be used to explore novel biomedical materials.

Formulation and evaluation of gels containing coconut kernel extract for topical application.

The biological activity of coconut (Cocos nucifera L.) extracts from its kernels and various parts was reported by many previous studies, it is therefore believable that the extracts of its kernels might show some activities in topical formulations. Among several kernel extracts, the TC06 extract prepared by soaking the steamed coconut kernels in hot water showed the highest total phenolic content (6.98 ±â€¯0.30 mg GAE/g extract) and the strongest antioxidant activity as determined using FRAP and DPPH methods with a reducing power value of 4.12 ±â€¯0.16 mg AAE/g of extract and an SC50 value of 2.38 ±â€¯0.14 mg/ml, respectively. In addition, this extract did not display any cytotoxic effects in the concentration range of 50-3200 µg/ml. Meanwhile, it revealed cytoprotective effects against t-BHP-induced cytotoxicity in HaCaT cells at concentrations higher than 400 µg/ml. The results of phytochemical investigations including a chemical color test, TLC, 1H NMR and FTIR suggested that the TC06 extract was mainly composed of flavonoids and terpenoids. Furthermore, the concentrations of heavy metals including As, Cd, Hg, and Pb in the TC06 extract were below permissible limits. According to the solubility, the TC06 extract was incorporated into gels using Carbopol Ultrez 21 as a gelling agent. The formulated gel containing 3% (w/w) TC06 extract was stable at 4 °C and 25 °C with 75% RH throughout the storage period. It was found that the Carbopol Ultrez 21-based hydroalcoholic gel containing an aqueous extract of coconut kernels exhibited antioxidant activities in the two assays and showed a sufficient consistency, a pleasing color, and a non-oily perception during the period of observation.