Insights into the relationship between the haem-binding pocket and the redox potential of c6 cytochromes: four atomic resolution structures of c6 and c6-like proteins from Synechococcus sp. PCC 7002.

The structure of cytochrome c6C from the mesophilic cyanobacterium Synechococcus sp. PCC 7002 has been determined at 1.03 Šresolution. This is the first structural report on the recently discovered cyanobacterial cytochrome c6-like proteins found in marine and nitrogen-fixing cyanobacteria. Despite high similarity in the overall three-dimensional fold between cytochromes c6 and c6C, the latter shows saliently different electrostatic properties in terms of surface charge distribution and dipole moments. Its midpoint redox potential is less than half of the value for typical c6 cytochromes and results mainly from the substitution of one residue in the haem pocket. Here, high-resolution crystal structures of mutants of both cytochromes c6 and c6C are presented, and the impact of the mutation of specific residues in the haem-binding pocket on the redox potential is discussed. These findings contribute to the elucidation of the structure-function relationship of c6-like cytochromes.

Atomic resolution structure of a protein prepared by non-enzymatic His-tag removal. Crystallographic and NMR study of GmSPI-2 inhibitor.

Purification of suitable quantity of homogenous protein is very often the bottleneck in protein structural studies. Overexpression of a desired gene and attachment of enzymatically cleavable affinity tags to the protein of interest made a breakthrough in this field. Here we describe the structure of Galleria mellonella silk proteinase inhibitor 2 (GmSPI-2) determined both by X-ray diffraction and NMR spectroscopy methods. GmSPI-2 was purified using a new method consisting in non-enzymatic His-tag removal based on a highly specific peptide bond cleavage reaction assisted by Ni(II) ions. The X-ray crystal structure of GmSPI-2 was refined against diffraction data extending to 0.98 Å resolution measured at 100 K using synchrotron radiation. Anisotropic refinement with the removal of stereochemical restraints for the well-ordered parts of the structure converged with R factor of 10.57% and Rfree of 12.91%. The 3D structure of GmSPI-2 protein in solution was solved on the basis of 503 distance constraints, 10 hydrogen bonds and 26 torsion angle restraints. It exhibits good geometry and side-chain packing parameters. The models of the protein structure obtained by X-ray diffraction and NMR spectroscopy are very similar to each other and reveal the same ß2αß fold characteristic for Kazal-family serine proteinase inhibitors.

Structure of a proteolytically resistant analogue of (NLys)5SFTI-1 in complex with trypsin: evidence for the direct participation of the Ser214 carbonyl group in serine protease-mediated proteolysis.

Peptide-peptoid hybrids are found to be potent inhibitors of serine proteases. These engineered peptidomimetics benefit from both types of units of the biopolymeric structure: the natural inhibitor part serves as a good binding template, while the P1-positioned peptoid component provides complete resistance towards proteolysis. In this report, the mechanism of proteolytic resistance of a P1 peptoid-containing analogue is postulated based on the crystal structure of the (NLys)(5)-modified sunflower trypsin inhibitor SFTI-1 in complex with bovine trypsin solved at 1.29 Šresolution. The structural differences between the (NLys)(5)SFTI-1-trypsin complex and the native SFTI-1-trypsin complex are surprisingly small and reveal the key role of the carbonyl group of the Ser214 residue of the enzyme, which is crucial for binding of the inhibitor and plays a crucial role in proteolysis mediated by serine proteases. The incorporated NLys5 peptoid residue prevents Ser214 from forming a hydrogen bond to the P1 residue, and in turn Gln192 does not form a hydrogen bond to the carbonyl group of the P2 residue. It also increases the distance between the Ser214 carbonyl group and the Ser195 residue, thus preventing proteolysis. The hybrid inhibitor structure reported here provides insight into protein-protein interaction, which can be efficiently and selectively probed with the use of peptoids incorporated within endogenous peptide ligands.

Cytochrome c(6B) of Synechococcus sp. WH 8102--crystal structure and basic properties of novel c(6)-like family representative.

Cytochromes c are soluble electron carriers of relatively low molecular weight, containing single heme moiety. In cyanobacteria cytochrome c6 participates in electron transfer from cytochrome b6f complex to photosystem I. Recent phylogenetic analysis revealed the existence of a few families of proteins homologous to the previously mentioned. Cytochrome c6A from Arabidopsis thaliana was identified as a protein responsible for disulfide bond formation in response to intracellular redox state changes and c550 is well known element of photosystem II. However, function of cytochromes marked as c6B, c6C and cM as well as the physiological process in which they take a part still remain unidentified. Here we present the first structural and biophysical analysis of cytochrome from the c6B family from mesophilic cyanobacteria Synechococcus sp. WH 8102. Purified protein was crystallized and its structure was refined at 1.4 Å resolution. Overall architecture of this polypeptide resembles typical I-class cytochromes c. The main features, that distinguish described protein from cytochrome c6, are slightly red-shifted α band of UV-Vis spectrum as well as relatively low midpoint potential (113.2±2.2 mV). Although, physiological function of cytochrome c6B has yet to be determined its properties probably exclude the participation of this protein in electron trafficking between b6f complex and photosystem I.

High-resolution structure of a retroviral protease folded as a monomer.

Mason-Pfizer monkey virus (M-PMV), a D-type retrovirus assembling in the cytoplasm, causes simian acquired immunodeficiency syndrome (SAIDS) in rhesus monkeys. Its pepsin-like aspartic protease (retropepsin) is an integral part of the expressed retroviral polyproteins. As in all retroviral life cycles, release and dimerization of the protease (PR) is strictly required for polyprotein processing and virion maturation. Biophysical and NMR studies have indicated that in the absence of substrates or inhibitors M-PMV PR should fold into a stable monomer, but the crystal structure of this protein could not be solved by molecular replacement despite countless attempts. Ultimately, a solution was obtained in mr-rosetta using a model constructed by players of the online protein-folding game Foldit. The structure indeed shows a monomeric protein, with the N- and C-termini completely disordered. On the other hand, the flap loop, which normally gates access to the active site of homodimeric retropepsins, is clearly traceable in the electron density. The flap has an unusual curled shape and a different orientation from both the open and closed states known from dimeric retropepsins. The overall fold of the protein follows the retropepsin canon, but the C(α) deviations are large and the active-site 'DTG' loop (here NTG) deviates up to 2.7 Å from the standard conformation. This structure of a monomeric retropepsin determined at high resolution (1.6 Å) provides important extra information for the design of dimerization inhibitors that might be developed as drugs for the treatment of retroviral infections, including AIDS.

Crystal structure of a monomeric retroviral protease solved by protein folding game players.

Following the failure of a wide range of attempts to solve the crystal structure of M-PMV retroviral protease by molecular replacement, we challenged players of the protein folding game Foldit to produce accurate models of the protein. Remarkably, Foldit players were able to generate models of sufficient quality for successful molecular replacement and subsequent structure determination. The refined structure provides new insights for the design of antiretroviral drugs.

Structure of the RuBisCO chaperone RbcX from the thermophilic cyanobacterium Thermosynechococcus elongatus.

The crystal structure of TeRbcX, a RuBisCO assembly chaperone from the cyanobacterium Thermosynechococcus elongatus, a thermophilic organism, has been determined at 1.7 Šresolution. TeRbcX has an unusual cysteine residue at position 103 that is not found in RbcX proteins from mesophilic organisms. Unlike wild-type TeRbcX, a mutant protein with Cys103 replaced by Ala (TeRbcX-C103A) could be readily crystallized. The structure revealed that the overall fold of the TeRbcX homodimer is similar to those of previously crystallized RbcX proteins. Normal-mode analysis suggested that TeRbcX might adopt an open or closed conformation through a hinge movement pivoted on a kink in two long α4 helices. This type of conformational transition is presumably connected to RbcL (the large RuBisCO subunit) binding during the chaperone function of the RuBisCO assembly.

Atomic-resolution structure of reduced cyanobacterial cytochrome c6 with an unusual sequence insertion.

The structure of the reduced form of cytochrome c(6) from the mesophilic cyanobacterium Synechococcus sp. PCC 7002 has been determined at 1.2 A and refined to an R-factor of 0.107. This protein is unique among all known cytochromes c(6), owing to the presence of an unusual seven-residue insertion, KDGSKSL(44-50), which differs from the insertion found in the recently discovered plant cytochromes c(6A). Furthermore, the present protein is unusual because of its very high content (36%) of the smallest residues (glycine and alanine). The structure reveals that the overall fold of the protein is similar to that of other class I c-type cytochromes, despite the presence of the specific insertion. The insertion is located within the most variable region of the cytochrome c(6) sequence, i.e. between helices II and III. The first six residues [KDGSKS(44-49)] form a loop, whereas the last residue, Leu50, extends the N-terminal beginning of helix III. Several specific noncovalent interactions are found inside the insertion, as well as between the insertion and the rest of the protein. The crystal structure contains three copies of the cytochrome c(6) molecule per asymmetric unit, and is characterized by an unusually high packing density, with solvent occupying barely 17.58% of the crystal volume.

Rational 'correction' of the amino-acid sequence of RbcX protein from the thermophilic cyanobacterium Thermosynechococcus elongatus dramatically improves crystallization.

RbcX is a dimeric protein found in cyanobacteria that assists in the assembly of the oligomeric RuBisCO complex. RbcX from the thermophile Thermosynechococcus elongatus (TeRbcX) contains an unusual Cys103 residue in its sequence and when expressed recombinantly the protein aggregates and cannot be crystallized. Site-directed mutagenesis of Cys103 to either Arg or Ala produced non-aggregating proteins that could be readily crystallized in several crystal forms. Synchrotron-radiation X-ray diffraction data were collected to 1.96 A resolution and formed the basis of crystal structure analysis of TeRbcX.

Novel DNA-binding element within the C-terminal extension of the nuclear receptor DNA-binding domain.

The heterodimer of the ecdysone receptor (EcR) and ultraspiracle (Usp), members of the nuclear receptors superfamily, is considered as the functional receptor for ecdysteroids initiating molting and metamorphosis in insects. Here we report the 1.95 A structure of the complex formed by the DNA-binding domains (DBDs) the EcR and the Usp, bound to the natural pseudopalindromic response element. Comparison of the structure with that obtained previously, using an idealized response element, shows how the EcRDBD, which has been previously reported to possess extraordinary flexibility, accommodates DNA-induced structural changes. Part of the C-terminal extension (CTE) of the EcRDBD folds into an alpha-helix whose location in the minor groove does not match any of the locations previously observed for nuclear receptors. Mutational analyses suggest that the alpha-helix is a component of EcR-box, a novel element indispensable for DNA-binding and located within the nuclear receptor CTE. This element seems to be a general feature of all known EcRs.

The crystal structure of gankyrin, an oncoprotein found in complexes with cyclin-dependent kinase 4, a 19 S proteasomal ATPase regulator, and the tumor suppressors Rb and p53.

Gankyrin is a 25-kDa hepatocellular carcinoma-associated protein that mediates protein-protein interactions in cell cycle control and protein degradation. It has been reported to form complexes with cyclin-dependent kinase 4, retinoblastoma protein, the S6b ATPase subunit of the 19 S regulator of the 26 S proteasome, and Mdm2, an E3 ubiquitin ligase involved in p53 degradation. It is the first protein described to bind both to the 26 S proteasome and to proteins in other complexes containing cyclin-dependent kinase(s) and p53 ubiquitylating activities, thus providing a mechanism for delivering cell cycle regulating machinery and ubiquitylated substrates to the proteasome for degradation. Gankyrin contains a 33-residue motif known as the ankyrin repeat that occurs five and a half to six times in the sequence. As a step toward understanding gankyrin interactions with its protein partners we have determined its three-dimensional crystal structure to 2.0-A resolution. It reveals that the entire 226-residue gankyrin polypeptide folds into seven ankyrin repeat elements. The ankyrin repeats, consisting of an antiparallel beta-hairpin followed by a perpendicularly oriented helix-loop-helix, pack side-by-side, creating an extended curved structure with a groove running across the long concave surface. Comparison with the structures of other ankyrin repeat proteins suggests that interactions with partner proteins are mediated by residues situated on this concave surface.

Crystallization of gankyrin, an oncoprotein that interacts with CDK4 and the S6b (rpt3) ATPase of the 19S regulator of the 26S proteasome.

Gankyrin is an oncoprotein overexpressed in hepatocarcinoma cells that binds to the cell-cycle regulator CDK4 and the S6b ATPase subunit of the regulatory component of the proteasome. It belongs to the family of ankyrin-repeat proteins that appear to mediate protein-protein interactions in diverse biochemical processes. Gankyrin has been crystallized from polyethylene glycol solutions and diffraction data have been obtained from these crystals that extend to 2.1 A spacing.

The crystal structure of the AAA domain of the ATP-dependent protease FtsH of Escherichia coli at 1.5 A resolution.

Eubacteria and eukaryotic cellular organelles have membrane-bound ATP-dependent proteases, which degrade misassembled membrane protein complexes and play a vital role in membrane quality control. The bacterial protease FtsH also degrades an interesting subset of cytoplasmic regulatory proteins, including sigma(32), LpxC, and lambda CII. The crystal structure of the ATPase module of FtsH has been solved, revealing an alpha/beta nucleotide binding domain connected to a four-helix bundle, similar to the AAA modules of proteins involved in DNA replication and membrane fusion. A sulfate anion in the ATP binding pocket mimics the beta-phosphate group of an adenine nucleotide. A hexamer form of FtsH has been modeled, providing insights into possible modes of nucleotide binding and intersubunit catalysis.

Crystallization of the AAA domain of the ATP-dependent protease FtsH of Escherichia coli.

FtsH is a membrane-anchored ATP-dependent protease that degrades misfolded or misassembled membrane proteins as well as a subset of cytoplasmic regulatory proteins. It belongs to the family of AAA(+) ATPases with roles in diverse cellular processes. The ATPase domain of FtsH from Escherichia coli has been crystallized from ammonium sulfate solutions and crystals diffracting to 1.5 A resolution have been obtained.