Switching on/off molybdenum nitride catalytic activity in ammonia synthesis through modulating metal-support interaction.

Modulating the interaction between Mo nanoparticles and their support is an elegant approach to finely tune the structural, physico-chemical, redox and electronic properties of the active site. In this work, a series of molybdenum nitride catalysts supported on TiO2, and SBA-15 has been prepared and fully characterized. The results of characterization confirmed the high dispersion of Mo and the formation of small molybdenum nanoparticles in both the 10-Mo-N/SBA-15 and 10-Mo-N/TiO2 catalysts. In this context, we have shown that the catalytic activity of Mo species was strongly impacted by the nature of the catalytic support. Amongst the studied supports, SBA-15 was found to be the most appropriate for Mo dispersion. In comparison, when supported on a reducible oxide (TiO2), Mo species showed poor catalytic activity in both ammonia synthesis and decomposition and were prone to quick deactivation in the ammonia synthesis reaction. Evidence of charge transfer from the reducible support to the active phase, indicative of possible SMSI behaviour, has been observed by XPS and EPR. Differences in the oxidation states, redox behaviours, and electronic properties have been further studied by means of EPR, H2-TPR and H2-TPD.

Strengthening the Connection between Science, Society and Environment to Develop Future French and European Bioeconomies: Cutting-Edge Research of VAALBIO Team at UCCS.

The development of the future French and European bioeconomies will involve developing new green chemical processes in which catalytic transformations are key. The VAALBIO team (valorization of alkanes and biomass) of the UCCS laboratory (Unité de Catalyse et Chimie du Solide) are working on various catalytic processes, either developing new catalysts and/or designing the whole catalytic processes. Our research is focused on both the fundamental and applied aspects of the processes. Through this review paper, we demonstrate the main topics developed by our team focusing mostly on oxygen- and hydrogen-related processes as well as on green hydrogen production and hybrid catalysis. The social impacts of the bioeconomy are also discussed applying the concept of the institutional compass.

Regeneration of Hopcalite used for the adsorption plasma catalytic removal of toluene by non-thermal plasma.

A dielectric barrier discharge reactor packed with both Hopcalite & glass beads has been investigated for the total oxidation of toluene adsorbed on Hopcalite. The catalytic activity and selectivity through the possible formation of by-products during the NTP discharge for the abatement of irreversibly adsorbed toluene have been investigated by FT-IR and mass spectrometer. The regeneration of the used Hopcalite by NTP discharge has been established by (i) determining the amount of toluene adsorbed on NTP regenerated Hopcalite, (ii) investigating the catalytic activity of NTP regenerated Hopcalite and (iii) comparing the bulk and surface properties of the fresh calcined and NTP regenerated Hopcalite. The ratio of amount of irreversibly adsorbed toluene to that of the total amount of adsorbed toluene adsorbed is similar for the fresh calcined and NTP (I) regenerated Hopcalite. The catalytic activity of the NTP (I) regenerated Hopcalite is slightly enhanced when compared to that of the fresh calcined Hopcalite. Although the first NTP treatment induces partial transformation of Hopcalite into Mn3O4 with no detected related CuOx and reduces specific surface area by a factor of 2, the toluene adsorption capacity remains less affected. A plausible reaction scheme for toluene decomposition in Hopcalite PBDBD reactor is proposed.

Selective photocatalytic conversion of methane into carbon monoxide over zinc-heteropolyacid-titania nanocomposites.

Chemical utilization of vast fossil and renewable feedstocks of methane remains one of the most important challenges of modern chemistry. Herein, we report direct and selective methane photocatalytic oxidation at ambient conditions into carbon monoxide, which is an important chemical intermediate and a platform molecule. The composite catalysts on the basis of zinc, tungstophosphoric acid and titania exhibit exceptional performance in this reaction, high carbon monoxide selectivity and quantum efficiency of 7.1% at 362 nm. In-situ Fourier transform infrared and X-ray photoelectron spectroscopy suggest that the catalytic performance can be attributed to zinc species highly dispersed on tungstophosphoric acid /titania, which undergo reduction and oxidation cycles during the reaction according to the Mars-van Krevelen sequence. The reaction proceeds via intermediate formation of surface methyl carbonates.

Elucidating the genesis of Bi2MoO6 catalyst by combination of synchrotron radiation experiments and Raman scattering.

Combination of in situ Raman scattering with high-resolution XRD and XAS techniques has proven to be a powerful tool to elucidate the crystal growth of gamma-Bi2MoO6 under hydrothermal conditions.

A systematic study of the interactions between chemical partners (metal, ligands, counterions, and support) involved in the design of Al2O3-supported nickel catalysts from diamine-Ni(II) chelates.

1.5 Ni wt %/Al2O3 catalysts have been prepared by incipient wetness impregnation using [Ni(diamine)x(H2O)(6-2x)]Y2 precursors (diamine = 1,2-ethanediamine (en) and trans-1,2-cyclohexanediamine (tc); x = 0, 1, and 2; Y = NO3- and Cl-), to avoid the formation, during calcination, of difficult-to-reduce nickel aluminate. N2 was chosen for thermal treatment to help reveal and take advantage of the reactions occurring between Ni2+, ligands, counterions, and support. In the case of [Ni(en)2(H2O)2]Y2 salts used as precursors, in situ UV-vis and DRIFT spectroscopies show that after treatment at 230 degrees C Ni(II) ions are grafted to alumina via two OAl bonds and that the diamine ligands still remain coordinated to grafted nickel ions but in a monodentate way, bridging the cation with the alumina surface. With Y = Cl-, the chloride counterions desorb as hydrogen chloride, and hydrogen released upon decomposition of the en ligands is able to reduce a fraction of nickel ions into metal as evidenced by XPS. In contrast, with Y = NO3-, compounds such as CO or NO are formed during thermal treatment, indicating that nitrate ions burn the en ligands. After thermal treatment at 500 degrees C, a surface phase containing Ni(II) ions forms, characterized by XPS and UV-vis spectroscopy. Temperature-programmed reduction shows that these ions can be quantitatively reduced to the metallic state at 500 degrees C, in contrast with the aluminate obtained when the preparation is carried out from [Ni(H2O)6]2+, which is reduced only partly at 950 degrees C. On the other hand, a total self-reduction of nickel complexes leading to 2-5-nm metal particles is obtained upon thermal treatment via the hydrogen released by a hydrogen-rich ligand such as tc, whatever the Y counterion. An appropriate choice of the ligand and the counterion allows then to obtain selectively Ni(II) ions or a dispersed reduced nickel phase after treatment in N2, as a result of the reactions occurring between the chemical partners present on alumina.