RESUMEN
Professor Chia-Kuang (Frank) Tsung made his scientific impact primarily through the atomic-level design of nanoscale materials for application in heterogeneous catalysis. He approached this challenge from two directions: above and below the material surface. Below the surface, Prof. Tsung synthesized finely controlled nanoparticles, primarily of noble metals and metal oxides, tailoring their composition and surface structure for efficient catalysis. Above the surface, he was among the first to leverage the tunability and stability of metal-organic frameworks (MOFs) to improve heterogeneous, molecular, and biocatalysts. This article, written by his former students, seeks first to commemorate Prof. Tsung's scientific accomplishments in three parts: (1) rationally designing nanocrystal surfaces to promote catalytic activity; (2) encapsulating nanocrystals in MOFs to improve catalyst selectivity; and (3) tuning the host-guest interaction between MOFs and guest molecules to inhibit catalyst degradation. The subsequent discussion focuses on building on the foundation laid by Prof. Tsung and on his considerable influence on his former group members and collaborators, both inside and outside of the lab.
RESUMEN
We investigated lattice strain on alloyed surfaces using â¼10 nm core-shell nanoparticles with controlled size, shape, and composition. We developed a wet-chemistry method for synthesizing small octahedral PdPt alloy nanoparticles and Au@PdPt core-shell nanoparticles with Pd-Pt alloy shells and Au cores. Upon introduction of the Au core, the size and shape of the overall nanostructure and the composition of the alloyed PdPt were maintained, enabling the use of the electrooxidation of formic acid as a probe to compare the surface structures with different lattice strain. We have found that the structure of the alloyed surface is indeed impacted by the lattice strain generated by the Au core. To further reveal the impact of lattice strain, we fine-tuned the shell thickness. Then, we used synchrotron-based X-ray diffraction to investigate the degree of lattice strain and compared the observations with the results of the formic acid electrooxidation, suggesting that there is an optimal intermediate shell thickness for high catalytic activity.
RESUMEN
TiNb2O7 is a Wadsley-Roth phase with a crystallographic shear structure and is a promising candidate for high-rate lithium ion energy storage. The fundamental aspects of the lithium insertion mechanism and conduction in TiNb2O7, however, are not well-characterized. Herein, experimental and computational insights are combined to understand the inherent properties of bulk TiNb2O7. The results show an increase in electronic conductivity of seven orders of magnitude upon lithiation and indicate that electrons exhibit both localized and delocalized character, with a maximum Curie constant and Li NMR paramagnetic shift near a composition of Li0.60TiNb2O7. Square-planar or distorted-five-coordinate lithium sites are calculated to invert between thermodynamic minima or transition states. Lithium diffusion in the single-redox region (i.e., x ≤ 3 in LixTiNb2O7) is rapid with low activation barriers from NMR and DLi = 10-11 m2 s-1 at the temperature of the observed T1 minima of 525-650 K for x ≥ 0.75. DFT calculations predict that ionic diffusion, like electronic conduction, is anisotropic with activation barriers for lithium hopping of 100-200 meV down the tunnels but ca. 700-1000 meV across the blocks. Lithium mobility is hindered in the multiredox region (i.e., x > 3 in LixTiNb2O7), related to a transition from interstitial-mediated to vacancy-mediated diffusion. Overall, lithium insertion leads to effective n-type self-doping of TiNb2O7 and high-rate conduction, while ionic motion is eventually hindered at high lithiation. Transition-state searching with beyond Li chemistries (Na+, K+, Mg2+) in TiNb2O7 reveals high diffusion barriers of 1-3 eV, indicating that this structure is specifically suited to Li+ mobility.
RESUMEN
Thermoelectric devices, which allow direct conversion of heat into electrical energy, require materials with improved figures of merit ( z T ) in order to ensure widespread adoption. Several techniques have been proposed to increase the z T of known thermoelectric materials through the reduction of thermal conductivity, including heavy atom substitution, grain size reduction and inclusion of a semicoherent second phase. The goal in these approaches is to reduce thermal conductivity through phonon scattering without modifying the electronic properties. In this work, we demonstrate that Ni interstitials in the half-Heusler thermoelectric TiNiSn can be created and controlled in order to improve physical properties. Ni interstitials in TiNi 1.1 Sn are not thermodynamically stable and, instead, are kinetically trapped using appropriate heat treatments. The Ni interstitials, which act as point defect phonon scattering centers and modify the electronic states near the Fermi level, result in reduced thermal conductivity and enhance the Seebeck coefficient. The best materials tested here, created from controlled heat treatments of TiNi 1.1 Sn samples, display z T = 0.26 at 300 K, the largest value reported for compounds in the Tiâ»Niâ»Sn family.
RESUMEN
The cubic semiconducting compounds APd3O4 (A = Ca, Sr) can be hole-doped by Na substitution on the A site and driven toward more conducting states. This process has been followed here by a number of experimental techniques to understand the evolution of electronic properties. While an insulator-to-metal transition is observed in Ca1-xNaxPd3O4 for x ≥ 0.15, bulk metallic behavior is not observed for Sr1-xNaxPd3O4 up to x = 0.20. Given the very similar crystal and (calculated) electronic structures of the two materials, the distinct behavior is a matter of interest. We present evidence of local disorder in the A = Sr materials through the analysis of the neutron pair distribution function, which is potentially at the heart of the distinct behavior. Solid-state 23Na nuclear magnetic resonance studies additionally suggest a percolative insulator-to-metal transition mechanism, wherein presumably small regions with a signal resembling metallic NaPd3O4 form almost immediately upon Na substitution, and this signal grows monotonically with substitution. Some signatures of increased local disorder and a propensity for Na clustering are seen in the A = Sr compounds.
RESUMEN
The effect of lattice strain on the catalytic properties of Pd nanoparticles is systematically studied. Synthetic strategies for the preparation of a series of shape-controlled Pd nanocrystals with lattice strain generated from different sources has been developed. All of these nanocrystals were created with the same capping agent under similar reaction conditions. First, a series of Pd nanoparticles was synthesized that were enclosed in {111} surfaces: Single-crystalline Pd octahedra, single-crystalline AuPd core-shell octahedra, and twinned Pd icosahedra. Next, various {100}-terminated particles were synthesized: Single-crystalline Pd cubes and single-crystalline AuPd core-shell cubes. Different extents of lattice strain were evident by comparing the X-ray diffraction patterns of these particles. During electrocatalysis, decreased potentials for CO stripping and increased current densities for formic-acid oxidation were observed for the strained nanoparticles. In the gas-phase hydrogenation of ethylene, the activities of the strained nanoparticles were lower than those of the single-crystalline Pd nanoparticles, perhaps owing to a larger amount of cetyl trimethylammonium bromide on the surface.
Asunto(s)
Nanopartículas del Metal/química , Paladio/química , Monóxido de Carbono/química , Catálisis , Etilenos/química , Formiatos/química , Hidrogenación , Oxidación-ReducciónRESUMEN
Developing syntheses of more sophisticated nanostructures comprising late transition metals broadens the tools to rationally design suitable heterogeneous catalysts for chemical transformations. Herein, we report a synthesis of Pd-Rh nanoboxes by controlling the migration of metals in a core-shell nanoparticle. The Pd-Rh nanobox structure is a grid-like arrangement of two distinct metal phases, and the surfaces of these boxes are {100} dominant Pd and Rh. The catalytic behaviors of the particles were examined in electrochemistry to investigate strain effects arising from this structure. It was found that the trends in activity of model fuel cell reactions cannot be explained solely by the surface composition. The lattice strain emerging from the nanoscale separation of metal phases at the surface also plays an important role.