RESUMEN
Tin-lead (Sn-Pb) perovskite solar cells (PSCs) hold considerable potential for achieving efficiencies near the Shockley-Queisser (S-Q) limit. Notably, the inverted structure stands as the preferred fabrication method for the most efficient Sn-Pb PSCs. In this regard, it is imperative to implement a strategic customization of the hole selective layer to facilitate carrier extraction and refine the quality of perovskite films, which requires effective hole selectivity and favorable interactions with Sn-Pb perovskites. Herein, we propose the development of Co-Self-Assembled Monolayers (Co-SAM) by integrating both [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and glycine at the buried contacts. The one-step deposition process employed in the fabrication of the Co-SAM ensures uniform coverage, resulting in a homogeneous surface potential. This is attributed to the molecular interactions occurring between 2PACz and glycine in the processing solution. Furthermore, the amine (-NH2) and ammonium (-NH3+) groups in glycine effectively passivate Sn4+ defects at the buried interface of Sn-Pb perovskite films, even under thermal stress. Consequently, the synergistic buried interface regulation of Co-SAM leads to a power conversion efficiency (PCE) of 23.46%, which outperforms devices modified with 2PACz or glycine alone. The Co-SAM-modified Sn-Pb PSC demonstrates enhanced thermal stability, maintaining 88% of its initial PCE under 65 °C thermal stress for 590 h.
RESUMEN
This work shows that various polyurethanes (FPUs) prepared using biomass-derived furan diols can be applied as promising tribopositive materials. The elastic FPUs having appropriate glass transition temperature (Tg) could be incorporated into polyethylene terephthalate (PET) fabrics to form FPU/PET films. The optimal FPU-4/PET film showed promising triboelectric performance with output voltages (Vp-p) up to 405 V and a maximum power density (Pmax) of 32 mW cm-2.
RESUMEN
The community's awareness of the prevalence and impact of zoonotic diseases has been significantly underestimated, leading to insufficient implementation of control measures. This study was carried out in Northern Tanzania between 2019 and 2023 to investigate zoonotic parasites and the risks associated with human activities that contribute to zoonotic diseases. Cross-sectional surveys were conducted in 12 villages, including nine in Loliondo Division and three in Babati District. Focus Group Discussions and Key Informant Interviews were conducted to assess the community's knowledge and practices regarding the risks associated with zoonotic diseases in the surveyed areas. A total of 255 samples were collected from various sources, including latrines, households, livestock enclosures, domestic dogs, and chickens. Out of these samples, 152 tested positive for identifiable parasite eggs and oocysts. These parasites included hookworms (21.7%), Trichuris sp. (14.5%), Strongyloides sp. (13.8%), Eimeria sp. (19.7%), Taeniids (5.9%), Hymenolepis sp. (3.3%), Spirometra sp. (2.6%), and Dipylidium sp. (0.7%). Taeniids and Spirometra species were predominantly found in villages near protected areas such as Arash Sokoni, Oloipiri, Sukenya, Wasso, Orkuyiene, Haytemba, and Loliondo. Hookworms were most commonly detected in Arash Sokoni, Loliondo, Isuguro, and Hyatemba, while Strongyloides sp. was prevalent in Wasso, Sukenya, and Olobo villages. The quantitative analysis reveals significant associations between hygiene practices, proximity to livestock enclosures, ecological factors, and human-animal interaction, highlighting their pivotal roles in determining soil-transmitted helminth (STH) prevalence across different villages. This study reveals that there was a generally low level of awareness regarding zoonotic diseases and STHs. The detection of STH samples, combined with the limited understanding of zoonotic diseases, emphasizes the importance of taking proactive measures to reduce transmission risks. Prioritizing education and promoting awareness along with implementing comprehensive strategies are essential steps to effectively tackle the problems linked to STH infections and substantially lessen the public health burden caused by zoonotic diseases.
RESUMEN
Self-powered electrical bandages (SEBs), integrated with wearable energy harvesters, can provide an effective and autonomous electrical stimulation (ES) solution for rapid and scarless wound healing. A continuously operating, wireless, and applicable-to-comprehensive-wound ES device is essential for the quick restoration of wounds and convenience. This work illustrates a SEB powered by body-coupled energy harvesting. The SEB continuously treats the wound with 60-Hz sinusoidal electrical potential gained from the coupling of the human body and ambient electrical waves. It is demonstrated that enough level of electrical potential can be applied to the wound, further enhanced by strong capacitive coupling arising from the use of high-permittivity poly(vinylidene fluoride-trifluoroethylene):CaCu3Ti4O12 (P(VDF-TrFE):CCTO) nanocomposite. The potential clinical efficacy of the SEB is illustrated by preclinical analysis of human fibroblasts and mouse wound model, thus confirming the successful expedition of wound recovery. This work suggests a new class of wearable devices to provide ES events and its potential for extension to other conventional wound care materials and device technology.
Asunto(s)
Vendajes , Dispositivos Electrónicos Vestibles , Cicatrización de Heridas , Humanos , Animales , Ratones , Polivinilos/química , Nanocompuestos/química , Fibroblastos/citología , Estimulación Eléctrica , Suministros de Energía EléctricaRESUMEN
PURPOSE: To investigate whether tibial-sided anterolateral ligament (ALL) injuries are associated with poor healing and residual pivot shift. METHODS: Patients who underwent anterior cruciate ligament reconstructions within postinjury 6 weeks from January 2008 to March 2021 were included. They had concomitant ALL injury confirmed by preoperative magnetic resonance imaging (MRI) and were followed for a minimum of 20 months. Preoperative ALL injury was graded by the Muramatsu classification, and postoperative ALL healing were graded by a modification of the Lee classification (good, partial, and nonvisualized). The patients were allocated to an improved group (IG) and an unimproved group (UG) on the basis of a comparison of pre- and postoperative MRI. ALL tear site, postoperative knee stability, Lysholm score, and Tegner activity scale (patient-reported outcomes [PROs]) were compared between the 2 groups. RESULTS: In total, 128 patients were enrolled; 94.5% patients achieved the minimal clinically important difference for PROs, respectively. The ALL was torn at the femoral side in 46.9% patients, at midsubstance in 31.2.%, and at tibial side in 21.9%, Preoperatively, 86 (67.2%) patients had a partial tear, and 42 (32.8%) patients had a complete tear. On the basis of the postoperative MRI appearances, 38 (29.7%) and 90 (70.3%) patients were allocated to the IG and UG, respectively. The tibial-side tears were significantly frequent in the UG (P = .032). Pivot shift showed a significantly greater incidence in the UG than IG (P = .004). Lachman test and PROs did not differ between the 2 groups. CONCLUSIONS: Tibial-sided ALL tears occurred in 18.7% of the UG compared with 3.2% of the IG, and 45.6% of the UG had a postoperative grade 1 or 2 pivot shift compared with 15.8% of the IG. Percentages of patients with the minimal clinically important difference for PROs did not differ between the 2 groups. However, the clinical relevance is limited by a high transfer bias. LEVEL OF EVIDENCE: Level III, retrospective cohort study.
RESUMEN
Objectives: This study identifies factors for differential diagnosis among lesions by retrospectively comparing panoramic and cone-beam computed tomography images and analyzing the characteristics of lesions associated with impacted mandibular third molars (IMTs). Materials and Methods: A retrospective cohort study was conducted in patients who simultaneously underwent IMT extraction surgery and related benign tumor resection or cyst enucleation at our institution from 2017 to 2021. To compare the characteristics of each group, two comparative analyses were conducted. The first comparison considered the most frequently observed lesions associated with IMTs: dentigerous cysts, odontogenic keratocysts (OKCs), and ameloblastoma. The second comparison involved placing dentigerous cysts, which have a relatively low recurrence rate, into group A and placing OKC, ameloblastoma, and odontogenic myxoma, which have high recurrence rates, into group B. Results: Significant differences in the size of the lesion were found in the order of ameloblastoma, OKC, and dentigerous cyst (P <0.05). The buccolingual width of ameloblastoma differed significantly from that of the other groups, with no significant difference observed between the OKCs and dentigerous cysts (P=0.083). Conclusion: Patient age and lesion size differed significantly among lesion types associated with IMTs, with younger age and larger lesions for OKCs and odontogenic tumors. OKCs are likely to have a larger mesiodistal width than dentigerous cysts. The buccolingual width of ameloblastomas was larger than those of dentigerous cysts and OKCs.
RESUMEN
The LPS-induced inflammation model is widely used for studying inflammatory processes due to its cost-effectiveness, reproducibility, and faithful representation of key hallmarks. While researchers often validate this model using clinical cytokine markers, a comprehensive understanding of gene regulatory mechanisms requires extending investigation beyond these hallmarks. Our study leveraged multiple whole-blood bulk RNA-seq datasets to rigorously compare the transcriptional profiles of the well-established LPS-induced inflammation model with those of several human diseases characterized by systemic inflammation. Beyond conventional inflammation-associated systems, we explored additional systems indirectly associated with inflammatory responses (i.e., ISR, RAAS, and UPR) using a customized core inflammatory gene list. Our cross-condition-validation approach spanned four distinct conditions: systemic lupus erythematosus (SLE) patients, dengue infection, candidemia infection, and staphylococcus aureus exposure. This analysis approach, utilizing the core gene list aimed to assess the model's suitability for understanding the gene regulatory mechanisms underlying inflammatory processes triggered by diverse factors. Our analysis resulted in elevated expressions of innate immune-associated genes, coinciding with suppressed expressions of adaptive immune-associated genes. Also, upregulation of genes associated with cellular stresses and mitochondrial innate immune responses underscored oxidative stress as a central driver of the corresponding inflammatory processes in both the LPS-induced and other inflammatory contexts.
RESUMEN
Airborne pathogens retain prolonged infectious activity once attached to the indoor environment, posing a pervasive threat to public health. Conventional air filters suffer from ineffective inactivation of the physics-separated microorganisms, and the chemical-based antimicrobial materials face challenges of poor stability/efficiency and inefficient viral inactivation. We, therefore, developed a rapid, reliable antimicrobial method against the attached indoor bacteria/viruses using a large-scale tunneling charge-motivated disinfection device fabricated by directly dispersing monolayer graphene on insulators. Free charges can be stably immobilized under the monolayer graphene through the tunneling effect. The stored charges can motivate continuous electron loss of attached microorganisms for accelerated disinfection, overcoming the diffusion limitation of chemical disinfectants. Complete (>99.99%) and broad-spectrum disinfection was achieved <1 min of attachment to the scaled-up device (25 square centimeters), reliably for 72 hours at high temperature (60°C) and humidity (90%). This method can be readily applied to high-touch surfaces in indoor environments for pathogen control.
Asunto(s)
Desinfección , Electrónica , Grafito , Desinfección/métodos , Electrónica/métodos , Grafito/química , Viabilidad Microbiana , BacteriasRESUMEN
BACKGROUND: For the surgical treatment of oral cancer, it is sometimes necessary to expand intraoral access within the oral cavity. The "swing approach" that involves lip splitting of the mandible and temporary mandibular osteotomy and the "visor approach" that does not split the lower lip and mandible are mainly used. This study analyzed postoperative outcomes such as complications, recurrence rate, and survival rate by these two approaches. The goal of this study is to evaluate the surgical outcomes of patients using these two approaches, to propose effective perioperative management for oral cancer surgery, and to compare the prognosis of oral cancer patients. MATERIALS AND METHODS: From 2005 to 2020, 29 patients who underwent surgery at the Department of Oral and Maxillofacial Surgery of Pusan National University Dental Hospital for oral cancer lesions occurred in the mandible, floor of mouth, and tongue were selected for the study. Based on the surgical approach used, a chart review was conducted on various prognostic clinical factors such as the patients' sex and age, primary site, TNM stage, histopathologic grade, recurrence and metastasis, postoperative survival rate, adjuvant chemo-radiation therapy, satisfaction with aesthetics/function/swallowing, length of hospital stay, tracheostomy and its duration, and neck dissection and its type. Statistical analysis was conducted using SPSS 25.0 (SPSS Inc., Chicago, IL) through Fisher's exact t-test. RESULT: There was no statistically significant difference between two groups in terms of clinical and pathological findings, such as survival rate, the need for adjuvant therapies, and the local recurrence rate. Although better outcomes were observed in terms of function, aesthetics, and postoperative complications in the group with visor approach, there was still no statistically significant difference between two groups. However, the duration of hospital stay was shorter in the visor approach group. CONCLUSION: There was no statistically significant difference in clinical prognostic factors between the swing approach and the visor approach. Therefore, when choosing between the two approaches for the ablation of oral cancer, it is considered to select the surgical priority approach that can be easy access based on the size and location of the lesion. The visor approach had advantages of aesthetics and healing period.
RESUMEN
Radio frequency (RF) hyperthermia focuses on raising the target area temperature to a value exceeding 45°C. Collagen is stimulated when the temperature rises to 45°C at the dermal layer, resulting in skin tightening. However, most studies on RF hyperthermia have focused on tumor ablation or using electrodes to radiate an electromagnetic field, which is highly inefficient. This study proposed a non-invasive RF hyperthermia skin-tightening system with a compact metamaterial-filled waveguide aperture antenna. The proposed RF system increased the temperature by 11.6°C and 35.3°C with 20 and 80 W of 2.45 GHz RF power, respectively, within 60 s and exhibited a very focused effective area. Furthermore, a metamaterial was proposed to reduce the size of the waveguide aperture antenna and focus the electromagnetic field in the near-field region. The proposed metamaterial-filled waveguide aperture antenna was compact, measuring 10 mm × 17.4 mm, with a peak gain of 2.2 dB at 2.45 GHz. The measured hyperthermia performance indicated that the proposed RF system exhibited better power- and time-efficient hyperthermia performance than other RF hyperthermia systems in the cosmetic skin lifting commercial market. The proposed RF hyperthermia systems will be applied into a new generation of beauty cosmetic devices.
RESUMEN
Background: In the setting of anterior cruciate ligament (ACL) injury, lateral meniscus posterior root tears (LMPRTs) are less readily diagnosed on preoperative magnetic resonance imaging (MRI). Therefore, to predict LMPRTs in ACL injuries, it is necessary to understand the risk factors associated with them. Purpose/Hypothesis: The purpose of this study was to investigate the association of lateral femoral condylar ratio (LFCR) with LMPRTs in ACL injuries. It was hypothesized that an increased LFCR would be associated with LMPRTs in noncontact ACL injuries. Study Design: Cohort study; Level of evidence, 3. Methods: Enrolled were consecutive patients who underwent primary acute (<6 weeks from injury) ACL reconstruction after noncontact injury and had LMPRT confirmed on preoperative MRI and arthroscopically (combined group; n = 62) as well as patients who underwent isolated acute ACL reconstruction (isolated group; n = 80) who were matched to the combined group by age, height, and body mass index (BMI). All patients underwent surgery between January 1999 and November 2021. LFCR and posterior tibial slope (PTS) were measured and compared between the isolated and combined groups. The area under the receiver operating characteristic curve (AUC) was calculated to determine the cutoff for detecting increased risk of LMPRTs. Results: The demographic characteristics of the 2 groups did not differ significantly, nor did the PTS. The LFCR was a significant factor (odds ratio [OR], 1.23; P = .001) associated with LMPRT. Patient age, height, BMI, and PTS were not associated with LMPRT. The AUC (0.66; 95% CI, 0.57-0.75) for LFCR had a sensitivity of 39% and specificity of 90% to predict LMPRT. The calculated cutoff associated with an increased risk for LMPRT when compared with the isolated group was 67.0% (OR, 4.98; 95% CI, 2.10-11.79). Conclusion: Increased LFCR was associated with the presence of LMPRTs in patients with acute ACL injuries. The LFCR may provide surgeons with additional information regarding the risk of having a concomitant LMPRT when planning ACL reconstructions.
RESUMEN
Ticks (Ixodida) and Fleas (Siphonaptera) are considered among the most important arthropod of public health concern due to their ability to transmit vector-borne pathogens to humans. By sharing a common environment, vector-borne diseases constituted major setbacks to the development of a pet population in Bangladesh. This study aimed to determine companion animal-associated ticks and fleas based on morpho-molecular approaches. Between December 2021 and May 2022, 74 animals (62 cats and 12 dogs) were examined, of which 17 (27.4%) cats and 9 (75.0%) dogs had ectoparasitic infestations, with 35.1% overall prevalence. Morphometrical examination showed the ectoparasites in these animals were Ctenocephalides spp. (flea) and Riphicephalus spp. (tick). Genetic analysis using the mitochondrial markers i.e. Cytochrome c oxidase subunit 1 (cox1) revealed the presence of two flea species i.e., Ctenocephalides canis, Ctenocephalides felis, and one tick species Rhipicephalus sanguineus. Interviews of animal owners indicate that 35.14% of them had no concern about ectoparasitic infestation or ectoparasites-borne diseases. Our results indicated that fleas and ticks were the most common ectoparasites in companion animals of this area. The zoonotic nature of some ectoparasites can be regarded as a public health alert. The findings will assist epidemiologists and policymakers in offering customized guidance for upcoming monitoring and preventive tactics in this area.
Asunto(s)
Enfermedades de los Gatos , Ctenocephalides , Enfermedades de los Perros , Infestaciones Ectoparasitarias , Infestaciones por Pulgas , Siphonaptera , Enfermedades Cutáneas Parasitarias , Gatos , Humanos , Animales , Perros , Mascotas , Bangladesh/epidemiología , Infestaciones Ectoparasitarias/epidemiología , Infestaciones Ectoparasitarias/veterinaria , Infestaciones por Pulgas/epidemiología , Infestaciones por Pulgas/veterinaria , Enfermedades Cutáneas Parasitarias/veterinaria , Enfermedades de los Gatos/epidemiología , Enfermedades de los Perros/epidemiologíaRESUMEN
A male Korean raccoon dog of unknown age was rescued and placed at the Daejeon Wildlife Rescue Center, Korea. Physical examination revealed severe emaciation and dehydration, as well as thick crusts and alopecia over most of the body. During medical care, the animal died and was submitted for postmortem examination. Firm, brown-red lesions of various sizes were observed on the surface of the lungs. In cross-sections of the lungs, pulmonary vessels were thickened and dilated, with white irregular papillary luminal projections. Histologically, pulmonary blood vessels were severely hyperplastic, characterized by thickened dilated walls and fibrous papillary projections covered with a single layer of endothelial cells (ECs). Hyperplastic fibrous connective tissue was confirmed by Masson trichrome staining. The ECs expressed CD31. We diagnosed the lesion as intravascular papillary endothelial hyperplasia, a unique non-neoplastic reactive process that has not been reported previously in pulmonary vessels of canids, equids, or felids, to our knowledge.
Asunto(s)
Canidae , Células Endoteliales , Masculino , Animales , Hiperplasia/veterinaria , Perros Mapache , Diagnóstico Diferencial , Pulmón , República de CoreaRESUMEN
Proteases function as pivotal molecular switches, initiating numerous biological events. Notably, potyviral protease, derived from plant viruses, has emerged as a trusted proteolytic switch in synthetic biological circuits. To harness their capabilities, we have developed a single-component photocleavable switch, termed LAUNCHER (Light-Assisted UNcaging switCH for Endoproteolytic Release), by employing a circularly permutated tobacco etch virus protease and a blue-light-gated substrate, which are connected by fine-tuned intermodular linkers. As a single-component system, LAUNCHER exhibits a superior signal-to-noise ratio compared with multi-component systems, enabling precise and user-controllable release of payloads. This characteristic renders LAUNCHER highly suitable for diverse cellular applications, including transgene expression, tailored subcellular translocation and optochemogenetics. Additionally, the plug-and-play integration of LAUNCHER into existing synthetic circuits facilitates the enhancement of circuit performance. The demonstrated efficacy of LAUNCHER in improving existing circuitry underscores its significant potential for expanding its utilization in various applications.
Asunto(s)
Péptido Hidrolasas , Potyvirus , Luz Azul , Proteolisis , Relación Señal-RuidoRESUMEN
Bumblebees are crucial for both natural ecosystems and agriculture, but their decline in distribution and abundance over the past decade is alarming. The global importance of bumblebees in natural ecosystems and agricultural food production cannot be overstated. However, the reported decline over the past decade has led to a surge of interest in understanding and addressing bumblebee population decline. Hence, we aimed to detect disruptions in the gut microbiome of male and worker bumblebees reared indoor and outdoor to assess potential resilience to environmental stress. Using the Illumina MiSeq platform for 16s rRNA amplicon sequencing, we analyzed the gut microbiome of male and worker bees that were raised indoors (designated as the IM and IW group) and those that were raised outdoors (also designated as the OM and OW group). Our results show presence of core bacteria Neisseriaceae, Orbaceae, Lactobacillaceae and Bifidobacteriaceae from indoor reared worker bees. However, a higher abundance of Bifidobacterium and absence of Fructobacillus from indoor reared worker bees was also observed. Indoor-reared male bees had lower diversity and fewer observed OTUs compared to outdoor-reared male bees. Additionally, the relative abundance of Actinobacteriota, Bacteroidota, and Firmicutes was significantly lower in indoor-reared males, while Proteobacteria was significantly increased. Despite this, we did not observe any dysbiosis in the gut microbiota of indoor-reared bumblebees when comparing the role of the gut symbionts among the groups. These results suggest that indoor-reared Bombus terrestris may be resilient to environmental stress when used as outdoor pollinators.
Asunto(s)
Microbioma Gastrointestinal , Masculino , Abejas/genética , Animales , Microbioma Gastrointestinal/genética , Ecosistema , ARN Ribosómico 16S/genética , Bacterias/genética , Firmicutes/genéticaRESUMEN
Bioresorbable bioelectronics, with their natural degradation properties, hold significant potential to eliminate the need for surgical removal. Despite notable achievements, two major challenges hinder their practical application in medical settings. First, they necessitate sustainable energy solutions with biodegradable components via biosafe powering mechanisms. More importantly, reliability in their function is undermined by unpredictable device lifetimes due to the complex polymer degradation kinetics. Here, we propose an on-demand bioresorbable neurostimulator to address these issues, thus allowing for clinical operations to be manipulated using biosafe ultrasound sources. Our ultrasound-mediated transient mechanism enables (1) electrical stimulation through transcutaneous ultrasound-driven triboelectricity and (2) rapid device elimination using high-intensity ultrasound without adverse health effects. Furthermore, we perform neurophysiological analyses to show that our neurostimulator provides therapeutic benefits for both compression peripheral nerve injury and hereditary peripheral neuropathy. We anticipate that the on-demand bioresorbable neurostimulator will prove useful in the development of medical implants to treat peripheral neuropathy.
Asunto(s)
Implantes Absorbibles , Traumatismos de los Nervios Periféricos , Humanos , Reproducibilidad de los Resultados , Física , Estimulación EléctricaRESUMEN
Rhabditiasis, caused by Rhabditis nematode, has long been recognized as a veterinary concern, however, human infection is exceedingly rare. For the first time in Bangladesh, this study confirmed human rhabditiasis infecting a 12-year-old child. The identification was made based on morphometric features and confirmed by amplifying the mitochondrial cox1 gene. During microscopical examination of stool samples, heavy infection with several developmental stages (larvae, adult males, and females) of nematodes was observed. Following morphometric analysis, the nematode was identified as Rhabditis sp. The features used in confirming the species were elongated tail, bulbous enlargement of mid-esophagus, and presence of adult males passed in the stool. The results of the phylogenetic analysis showed that isolates of Rhabditis sp. belonged to distinct clades alongside S. stercoralis.
RESUMEN
With the growing demand for next-generation health care, the integration of electronic components into implantable medical devices (IMDs) has become a vital factor in achieving sophisticated healthcare functionalities such as electrophysiological monitoring and electroceuticals worldwide. However, these devices confront technological challenges concerning a noninvasive power supply and biosafe device removal. Addressing these challenges is crucial to ensure continuous operation and patient comfort and minimize the physical and economic burden on the patient and the healthcare system. This Review highlights the promising capabilities of bioresorbable triboelectric nanogenerators (B-TENGs) as temporary self-clearing power sources and self-powered IMDs. First, we present an overview of and progress in bioresorbable triboelectric energy harvesting devices, focusing on their working principles, materials development, and biodegradation mechanisms. Next, we examine the current state of on-demand transient implants and their biomedical applications. Finally, we address the current challenges and future perspectives of B-TENGs, aimed at expanding their technological scope and developing innovative solutions. This Review discusses advancements in materials science, chemistry, and microfabrication that can advance the scope of energy solutions available for IMDs. These innovations can potentially change the current health paradigm, contribute to enhanced longevity, and reshape the healthcare landscape soon.
RESUMEN
OBJECTIVES: The coronavirus disease 2019 (COVID-19) pandemic has led to high levels of burnout among nurses. Information and communication technology (ICT) may offer a solution to prevent a potential collapse in healthcare. The aim of this study was to identify areas where ICT could provide support, by analyzing the work of nurses during the COVID-19 pandemic. METHODS: This retrospective exploratory descriptive study analyzed qualitative data from the activity diaries of seven nurses working in COVID-19 wards or intensive care units. RESULTS: The nursing work process during COVID-19 involved "added tasks," "changed tasks," and "reduced tasks" compared to the pre-COVID-19 situation. Nurses reported difficulties in communicating with other healthcare professionals both inside and outside the isolation room, as well as with patients. The use of various ICT solutions, such as real-time video-conferencing systems or mobile robots, could enhance patient monitoring in the isolation room and improve the quality and efficiency of communication. CONCLUSIONS: The changes in work tasks not only led to nurse exhaustion but also negatively impacted the quality of care. ICT solutions should be explored to minimize the time spent in the isolation room, thereby reducing the risk of infection spread. This could also enhance communication among patients, family caregivers, and healthcare professionals.