RESUMEN
Cellulose nanopaper is a material structure that possesses high mechanical performance and is widely regarded as a promising 2D reinforcement for polymer matrix composites. This work explores the use of low grammage bacterial cellulose (BC) nanopaper as reinforcement for poly(acrylated urethane) interlayer adhesive to increase the impact performance of multilayer acrylic composites. The BC nanopaper is impregnated with an acrylated urethane resin and laminated between acrylic sheets to create BC/acrylic composites consisting of one, three, and five layers of BC nanopaper-reinforced poly(acrylated urethane) interlayer adhesive(s). Both the poly(acrylated urethane)-filled BC nanopaper interlayer adhesive and the resulting laminated acrylic composites are optically transparent. The incorporation of BC nanopaper into the poly(acrylated urethane) interlayer adhesive improves the tensile modulus by eightfold and the single-edge notched fracture toughness by 60% compared to neat poly(acrylated urethane). It is also found that using poly(acrylated urethane)-filled BC nanopaper interlayer adhesive proves beneficial to the impact properties of the resulting laminated acrylic composites. In Charpy impact testing, the impact strength of the multilayer acrylic composites increases by up to 130% compared to the "gold-standard" impact-modified monolithic acrylic, with a BC loading of only 1.6 wt%.
Asunto(s)
Celulosa , Celulosa/química , Poliuretanos/química , Resinas Acrílicas/química , Papel , Resistencia a la Tracción , Ensayo de MaterialesRESUMEN
The processing of an immiscible polymer blend using melt blending (i.e., extrusion) often results in a polymer material with inferior mechanical performance compared with its virgin counterparts. Here, we report and compare the properties of immiscible polymer blends produced from industrial mixed plastic waste from shredder residue comprising at least four different polymers (acrylonitrile butadiene styrene, polystyrene, polypropylene, and polyethylene) with and without a prior melt-blending step employed. As anticipated, mixed plastic blend produced with a prior melt-blending step exhibited a more homogeneous microstructure, resulting in brittleness, poor work of fracture, and single-edge notched fracture toughness with a flat R-curve. Without the intimate polymers mixing arising from melt blending, the resulting mixed plastic blend was found to possess a more heterogeneous concentric ellipsoid microstructure with large single polymer domains. This mixed plastic blend demonstrated progressive failure under uniaxial tensile loading, along with a more ductile single-edge notched fracture toughness response accompanied by a growing R-curve. Digital image correlation and fractographic analysis revealed that melt blending created a large number of incompatible polymer boundaries that acted as stress concentration points, leading to brittleness and earlier onset catastrophic failure. The more heterogeneous mixed plastic blend produced without using a prior melt-blending step contains a smaller number of incompatible polymer boundaries. Additionally, the presence of larger single polymer domains also implies that the mechanical characteristics of the single polymer can be exploited in the immiscible mixed plastic blend. Our work opens up a simple pathway to add value to mixed plastic waste from shredder residue for use in engineering applications, diverting them away from landfill or incineration.
RESUMEN
Environmental concerns are driving interest in postpetroleum synthetic textiles produced from microbial and fungal sources. Bacterial cellulose (BC) is a promising sustainable leather alternative, on account of its material properties, low infrastructure needs and biodegradability. However, for alternative textiles like BC to be fully sustainable, alternative ways to dye textiles need to be developed alongside alternative production methods. To address this, we genetically engineer Komagataeibacter rhaeticus to create a bacterial strain that grows self-pigmenting BC. Melanin biosynthesis in the bacteria from recombinant tyrosinase expression achieves dark black coloration robust to material use. Melanated BC production can be scaled up for the construction of prototype fashion products, and we illustrate the potential of combining engineered self-pigmentation with tools from synthetic biology, through the optogenetic patterning of gene expression in cellulose-producing bacteria. With this study, we demonstrate that combining genetic engineering with current and future methods of textile biofabrication has the potential to create a new class of textiles.
RESUMEN
Ineffective sorting of post-consumer plastics remains one of the major obstacles in the recycling of plastics. Consequently, these highly heterogeneous, mixed post-consumer plastics will end up in landfill or have to be incinerated as repurposing them directly would lead to a polymer blend with inferior quality for many end-uses. In this work, we demonstrate the use of carbon fibers (CFs) to practically upgrade the mechanical properties of mixed plastics, adding value to them. This will create a stronger demand for mixed plastics to be used in various engineering applications. Using polyethylene terephthalate (PET) and polypropylene (PP) as the model immiscible polymer blend, we showed that the incorporation of CFs increased the tensile, flexural, and single-edge notched fracture toughness of the resulting CF-reinforced PET/PP composite blends. Despite the high environmental burden associated with the production of CFs, cradle-to-grave life-cycle analysis showed that CF-reinforced PET/PP composites have a lower environmental impact than the life-cycle scenarios of "doing nothing" and repurposing immiscible PET/PP blends as it is without CF reinforcement. This can be attributed to the weight saving achieved, a direct result of their higher mechanical performance. Our work opens up opportunities for the use of mixed plastics in various higher value applications such that they can be diverted away from landfill or incineration, in line with the concept of circular economy.
RESUMEN
Bacteria proficient at producing cellulose are an attractive synthetic biology host for the emerging field of Engineered Living Materials (ELMs). Species from the Komagataeibacter genus produce high yields of pure cellulose materials in a short time with minimal resources, and pioneering work has shown that genetic engineering in these strains is possible and can be used to modify the material and its production. To accelerate synthetic biology progress in these bacteria, we introduce here the Komagataeibacter tool kit (KTK), a standardized modular cloning system based on Golden Gate DNA assembly that allows DNA parts to be combined to build complex multigene constructs expressed in bacteria from plasmids. Working in Komagataeibacter rhaeticus, we describe basic parts for this system, including promoters, fusion tags, and reporter proteins, before showcasing how the assembly system enables more complex designs. Specifically, we use KTK cloning to reformat the Escherichia coli curli amyloid fiber system for functional expression in K. rhaeticus, and go on to modify it as a system for programming protein secretion from the cellulose producing bacteria. With this toolkit, we aim to accelerate modular synthetic biology in these bacteria, and enable more rapid progress in the emerging ELMs community.
Asunto(s)
Celulosa , Ingeniería Genética , Celulosa/genética , Clonación Molecular , Plásmidos/genética , Biología SintéticaRESUMEN
Engineered living materials (ELMs) based on bacterial cellulose (BC) offer a promising avenue for cheap-to-produce materials that can be programmed with genetically encoded functionalities. Here we explore how ELMs can be fabricated in a modular fashion from millimetre-scale biofilm spheroids grown from shaking cultures of Komagataeibacter rhaeticus. Here we define a reproducible protocol to produce BC spheroids with the high yield bacterial cellulose producer K. rhaeticus and demonstrate for the first time their potential for their use as building blocks to grow ELMs in 3D shapes. Using genetically engineered K. rhaeticus, we produce functionalized BC spheroids and use these to make and grow patterned BC-based ELMs that signal within a material and can sense and report on chemical inputs. We also investigate the use of BC spheroids as a method to regenerate damaged BC materials and as a way to fuse together smaller material sections of cellulose and synthetic materials into a larger piece. This work improves our understanding of BC spheroid formation and showcases their great potential for fabricating, patterning and repairing ELMs based on the promising biomaterial of bacterial cellulose.
Asunto(s)
Acetobacteraceae/crecimiento & desarrollo , Bioingeniería/métodos , Biopelículas , Celulosa/química , Ingeniería Genética/métodos , Medicina Regenerativa/métodos , Acetobacteraceae/química , Acetobacteraceae/aislamiento & purificación , Celulosa/aislamiento & purificaciónRESUMEN
Hydrogels derived from TEMPO-oxidised cellulose nanofibrils (TOCNs) are not robust and inherently water unstable if the TOCNs are not crosslinked or coated with a water-swellable polymer. Furthermore, the manufacturing of self-standing TOCN films is still a challenge due to the small TOCN diameter and the viscosifying effect of TOCNs. Here, we report the TEMPO-mediated oxidation of bacterial cellulose (BC) nanopaper as a route to produce robust and water stable TOCN hydrogels without the need of additional additives or crosslinking steps. Pristine BC pellicle was first press-dried into a dried and well-consolidated BC nanopaper, followed by TEMPO-oxidation at various NaClO concentrations. The oxidation reaction introduced carboxylate moieties onto the exposed BC nanofibrils within the nanopaper network structure. This then led to the expansion and swelling of the nanopaper into a hydrogel. A swelling ratio of up to 100 times the original thickness of the BC nanopaper was observed upon TEMPO-oxidation. The water retention value of the TEMPO-oxidised BC hydrogels was also found to increase with increasing carboxylate content. These TEMPO-oxidised BC hydrogels were found to be robust and water-stable, even under prolonged (>1 month) magnetic stirring in water. We further showed that high grammage self-standing TOCN films (100 g m-2) can be fabricated as simple as press-drying these water stable TEMPO-oxidised BC hydrogels without the need of vacuum-assisted filtration or slow-drying, which is typically the rate-limiting step in the manufacturing of TOCN films.
RESUMEN
Nanocellulose is typically stored and transported as a gel with a nominal solid content of up to 5 wt.-% to avoid interfibril hornification, i.e. the formation of irreversible hydrogen bonds between adjacent nanocellulose upon drying, which makes nanocellulose not cost-effective. In this work, we report the use of low molecular weight liquid poly(ethylene glycol) (PEG-200) as a replacement for the water phase in nanocellulose aqueous gel. Our results indicated that nanocellulose can be stored in PEG-200 at a solid content of up to 70 wt.-% without interfibril hornification, even when exposed to the ambient environment. This is due to the low vapour pressure and high boiling point of PEG-200. ATR-FTIR and ζ-potential measurements confirmed that PEG-200 can be easily washed out from the nanocellulose as PEG-200 is water miscible. Using PEG-200 as a replacement for the water phase in nanocellulose aqueous gel could improve the cost-efficiency of nanocellulose storage and transportation. The tensile properties of the cellulose nanopaper prepared from the various never-dried and once-dried nanocellulose are also discussed in this work.
RESUMEN
Nanocellulose network in the form of cellulose nanopaper is an important material structure and its time-dependent mechanical response is crucial in many of its potential applications. In this work, we report the influences of grammage and strain rate on the tensile response of bacterial cellulose (BC) nanopaper. BC nanopaper with grammages of 20, 40, 60 and 80 g m-2 were tested in tension at strain rates ranging from 0.1% s-1 to 50% s-1. At strain rates [Formula: see text] 2.5% s-1, both the tensile modulus and strength of the BC nanopapers stayed constant at ~ 14 GPa and ~ 120 MPa, respectively. At higher strain rates of 25% s-1 and 50% s-1 however, the tensile properties of the BC nanopapers decreased significantly. This observed anomalous tensile response of BC nanopaper is attributed to inertial effect, in which some of the curled BC nanofibres within the nanopaper structure do not have enough time to uncurl before failure at such high strain rates. Our measurements further showed that BC nanopaper showed little deformation under creep, with a secondary creep rate of only ~ 10-6 s-1. This stems from the highly crystalline nature of BC, as well as the large number of contact or physical crosslinking points between adjacent BC nanofibres, further reducing the mobility of the BC nanofibres in the nanopaper structure.
RESUMEN
The ever-increasing demand for carbon fibre reinforced polymers (CFRP) and stringent environmental legislation have driven the research into recycling and reusing the CFRP waste. This paper presents a mechanical recycling process of CFRP and the application of the recyclates as reinforcement for epoxy foams. The CFRP was mechanically processed using a jet mill. Up to 10 wt% of the CFRP recyclates, without separation of fibre-rich portion and resin-rich portion, was added into epoxy foams. The compressive modulus and strength of the epoxy foams increased from 288 MPa and 7.0 MPa, respectively, to 1060 MPa and 22.8 MPa, respectively, accompanied with an increase in foam density from 0.37 g cm-3 to 0.68 g cm-3. Consequently, the specific compressive modulus and strength (normalised against density) increased from 789 MPa cm3 g-1 and 19.1 MPa cm3 g-1 for unreinforced foam to 1563 MPa cm3 g-1 and 33.5 MPa cm3 g-1 for CFRP recyclates reinforced foam, representing a 98% and 75% improvement, respectively. These results demonstrate that the CFRP recyclates have excellent reinforcing ability for epoxy foams.
Asunto(s)
Fibra de Carbono , Polímeros , ReciclajeRESUMEN
Carbon dioxide/epoxide copolymerization is an efficient way to add value to waste CO2 and to reduce pollution in polymer manufacturing. Using this process to make low molar mass polycarbonate polyols is a commercially relevant route to new thermosets and polyurethanes. In contrast, high molar mass polycarbonates, produced from CO2, generally under-deliver in terms of properties, and one of the most widely investigated, poly(cyclohexene carbonate), is limited by its low elongation at break and high brittleness. Here, a new catalytic polymerization process is reported that selectively and efficiently yields degradable ABA-block polymers, incorporating 6-23 wt % CO2. The polymers are synthesized using a new, highly active organometallic heterodinuclear Zn(II)/Mg(II) catalyst applied in a one-pot procedure together with biobased ε-decalactone, cyclohexene oxide, and carbon dioxide to make a series of poly(cyclohexene carbonate-b-decalactone-b-cyclohexene carbonate) [PCHC-PDL-PCHC]. The process is highly selective (CO2 selectivity >99% of theoretical value), allows for high monomer conversions (>90%), and yields polymers with predictable compositions, molar mass (from 38-71 kg mol-1), and forms dihydroxyl telechelic chains. These new materials improve upon the properties of poly(cyclohexene carbonate) and, specifically, they show good thermal stability (Td,5 â¼ 280 °C), high toughness (112 MJ m-3), and very high elongation at break (>900%). Materials properties are improved by precisely controlling both the quantity and location of carbon dioxide in the polymer chain. Preliminary studies show that polymers are stable in aqueous environments at room temperature over months, but they are rapidly degraded upon gentle heating in an acidic environment (60 °C, toluene, p-toluene sulfonic acid). The process is likely generally applicable to many other lactones, lactides, anhydrides, epoxides, and heterocumulenes and sets the scene for a host of new applications for CO2-derived polymers.
RESUMEN
The structural component of fungal cell walls comprises of chitin covalently bonded to glucan; this constitutes a native composite material (chitin-glucan, CG) combining the strength of chitin and the toughness of glucan. It has a native nano-fibrous structure in contrast to nanocellulose, for which further nanofibrillation is required. Nanopapers can be manufactured from fungal chitin nanofibrils (FChNFs). FChNF nanopapers are potentially applicable in packaging films, composites, or membranes for water treatment due to their distinct surface properties inherited from the composition of chitin and glucan. Here, chitin-glucan nanofibrils were extracted from common mushroom (Agaricus bisporus) cell walls utilizing a mild isolation procedure to preserve the native quality of the chitin-glucan complex. These extracts were readily disintegrated into nanofibre dimensions by a low-energy mechanical blending, thus making the extract dispersion directly suitable for nanopaper preparation using a simple vacuum filtration process. Chitin-glucan nanopaper morphology, mechanical, chemical, and surface properties were studied and compared to chitin nanopapers of crustacean (Cancer pagurus) origin. It was found that fungal extract nanopapers had distinct physico-chemical surface properties, being more hydrophobic than crustacean chitin.
Asunto(s)
Agaricus/química , Quitina/química , Glucanos/química , Pared Celular/química , Hongos/química , Nanofibras/química , Propiedades de SuperficieRESUMEN
Thermoplastic elastomers benefit from high elasticity and straightforward (re)processability; they are widely used across a multitude of sectors. Currently, the majority derive from oil, do not degrade or undergo chemical recycling. Here a new series of ABA triblock polyesters are synthesized and show high-performances as degradable thermoplastic elastomers; their composition is poly(cyclohexene-alt-phthalate)-b-poly(ε-decalactone)-b-poly(cyclohexene-alt-phthalate) {PE-PDL-PE}. The synthesis is accomplished using a zinc(ii)/magnesium(ii) catalyst, in a one-pot procedure where ε-decalactone ring-opening polymerization yielding dihydroxyl telechelic poly(ε-decalatone) (PDL, soft-block) occurs first and, then, addition of phthalic anhydride/cyclohexene oxide ring-opening copolymerization delivers semi-aromatic polyester (PE, hard-block) end-blocks. The block compositions are straightforward to control, from the initial monomer stoichiometry, and conversions are high (85-98%). Two series of polyesters are prepared: (1) TBPE-1 to TBPE-5 feature an equivalent hard-block volume fraction (f hard = 0.4) and variable molar masses 40-100 kg mol-1; (2) TBPE-5 to TBPE-9 feature equivalent molar masses (â¼100 kg mol-1) and variable hard-block volume fractions (0.12 < f hard < 0.4). Polymers are characterized using spectroscopies, size-exclusion chromatography (SEC), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). They are amorphous, with two glass transition temperatures (â¼-51 °C for PDL; +138 °C for PE), and block phase separation is confirmed using small angle X-ray scattering (SAXS). Tensile mechanical performances reveal thermoplastic elastomers (f hard < 0.4 and N > 1300) with linear stress-strain relationships, high ultimate tensile strengths (σ b = 1-5 MPa), very high elongations at break (ε b = 1000-1900%) and excellent elastic recoveries (98%). There is a wide operating temperature range (-51 to +138 °C), an operable processing temperature range (+100 to +200 °C) and excellent thermal stability (T d,5% â¼ 300 °C). The polymers are stable in aqueous environments, at room temperature, but are hydrolyzed upon gentle heating (60 °C) and treatment with an organic acid (para-toluene sulfonic acid) or a common lipase (Novozyme® 51032). The new block polyesters show significant potential as sustainable thermoplastic elastomers with better properties than well-known styrenic block copolymers or polylactide-derived elastomers. The straightforward synthesis allows for other commercially available and/or bio-derived lactones, epoxides and anhydrides to be developed in the future.
RESUMEN
Greener alternatives to synthetic polymers are constantly being investigated and sought after. Chitin is a natural polysaccharide that gives structural support to crustacean shells, insect exoskeletons, and fungal cell walls. Like cellulose, chitin resides in nanosized structural elements that can be isolated as nanofibers and nanocrystals by various top-down approaches, targeted at disintegrating the native construct. Chitin has, however, been largely overshadowed by cellulose when discussing the materials aspects of the nanosized components. This Perspective presents a thorough overview of chitin-related materials research with an analytical focus on nanocomposites and nanopapers. The red line running through the text emphasizes the use of fungal chitin that represents several advantages over the more popular crustacean sources, particularly in terms of nanofiber isolation from the native matrix. In addition, many ß-glucans are preserved in chitin upon its isolation from the fungal matrix, enabling new horizons for various engineering solutions.
Asunto(s)
Quitina/química , Hongos/química , Nanoestructuras/química , Exoesqueleto/química , Animales , Vendajes , Celulosa/química , Quitina/aislamiento & purificación , Crustáceos/química , Embalaje de Alimentos , Hongos/citología , Humanos , Polímeros/químicaRESUMEN
Cellulose nanofibers are often explored as biobased reinforcement for the production of high-performance composite materials. In this work, we fabricated transparent poly(methyl methacrylate) (PMMA) composites consisting of two-dimensional and three-dimensional bacterial cellulose (BC) nanofiber networks. Three different composite designs consisting of 1 vol % BC loading were fabricated and studied: (i) composites with a three-dimensional BC nanofiber network embedded uniformly throughout the PMMA matrix; (ii) sandwich-structured construction consisting of three-dimensional BC-PMMA sandwiched between two neat PMMA sheets; and (iii) dried and well-consolidated two-dimensional BC nanofiber network embedded in a PMMA matrix. All fabricated model BC-PMMA composites were found to be optically transparent, but PMMA composites consisting of the two-dimensional BC nanofiber network possessed higher light transmittance (73% @550 nm) compared to the three-dimensional BC nanofiber network counterparts (63% @550 nm). This is due to the higher specific surface area of the three-dimensional BC nanofiber network, which led to more light scattering. Nevertheless, it was found that both two-dimensional and three-dimensional BC nanofiber networks serve as excellent stiffening agents for PMMA matrix, improving the tensile modulus of the resulting composites by up to 30%. However, no improvement in tensile strength was observed. The use of three-dimensional BC nanofiber network led to matrix embrittlement, reducing the tensile strain-at-failure, fracture resistance, and Charpy impact strength of the resulting BC-PMMA composites. When the BC nanofiber network was used as two-dimensional reinforcement, cracks were observed to propagate through the debonding of BC nanofiber network, leading to higher fracture toughness and Charpy impact strength. These novel findings could open up further opportunities in the design of novel optically transparent polymeric composite laminates based on the two-dimensional BC nanofiber network for impact protection.
RESUMEN
Bacteriophage (phage) have attractive advantages as delivery systems compared with mammalian viruses, but have been considered poor vectors because they lack evolved strategies to confront and overcome mammalian cell barriers to infective agents. We reasoned that improved efficacy of delivery might be achieved through structural modification of the viral capsid to avoid pre- and postinternalization barriers to mammalian cell transduction. We generated multifunctional hybrid adeno-associated virus/phage (AAVP) particles to enable simultaneous display of targeting ligands on the phage's minor pIII proteins and also degradation-resistance motifs on the very numerous pVIII coat proteins. This genetic strategy of directed evolution bestows a next-generation of AAVP particles that feature resistance to fibrinogen adsorption or neutralizing antibodies and ability to escape endolysosomal degradation. This results in superior gene transfer efficacy in vitro and also in preclinical mouse models of rodent and human solid tumors. Thus, the unique functions of our next-generation AAVP particles enable improved targeted gene delivery to tumor cells.
Asunto(s)
Bacteriófago M13/genética , Dependovirus/genética , Terapia Genética/métodos , Vectores Genéticos/genética , Neoplasias/terapia , Animales , Anticuerpos Neutralizantes/inmunología , Anticuerpos Antivirales/inmunología , Bacteriófago M13/inmunología , Proteínas de la Cápside/genética , Proteínas de la Cápside/inmunología , Línea Celular Tumoral , Dependovirus/inmunología , Endosomas/inmunología , Endosomas/virología , Vectores Genéticos/administración & dosificación , Vectores Genéticos/inmunología , Humanos , Lisosomas/inmunología , Lisosomas/virología , Ratones , Neoplasias/genética , Oligopéptidos/genética , Oligopéptidos/inmunología , Prueba de Estudio Conceptual , Ratas , Transducción Genética/métodos , Internalización del Virus , Ensayos Antitumor por Modelo de XenoinjertoRESUMEN
In this research article, wood based microfibrillated cellulose (MFC) was studied to gain a better understanding of the process of dependent network formation. Networking potential and obtained properties of the produced dimensional structures could be controlled using opted processing routes. The fabricated dimensional structure, using freeze-drying (FD) is a highly open and porous network (98% porosity) compared to slightly tight, dense and less porous network produced after pressing at 200kN (96% porosity), followed by vacuum-filtered (VF) networks (33% porosity). The porosity (17%) was further decreased when the casting (CS) method was used, further producing a highly dense and compressed network. High water flux (180.8 ± 11 L/m2h) of pressed freeze-dried (PFD) followed by vacuum-filtered (VF) (11.4 ± 1.9 L/m2h) and casting CS (0.7 ± 0.01 L/m2h) were calculated using device. Furthermore, increased water flux (1.4 fold) of Experimental Paper Machine (XPM) based structures was reported in comparison with CS structures. Pore-sized distribution and surface area were measured using Hg porosimetry; they showed an average pore size of 16.5 µm for FD, followed by PFD (8.2 µm) structures. A 27-fold decrease in average pore-size was observed for CS structure in comparison with the FD structures. Highest tensile strength (87 ± 21 MPa) was recorded for CS structures, indicating a more highly compacted network formation compared to VF (82 ± 19 MPa) and PFD (1.6 ± 0.06 MPa). Furthermore, an attempt was made to upscale the VF structures using traditional paper making approach on XMP. Improved tensile strength (73 ± 11 MPa) in machine produced structures is due to alignment of fibers towards machine direction compared to cross directional (43 ± 9 MPa) fractured structures as shown in our Scanning Electron Microscopy (SEM) analysis. Surface functionalization of MFC using enzyme (hexokinase) was performed to increase the adsorption efficiency towards ferric ions removal. All fabricated structures were further evaluated for Fe(iii) removal and it was summarized that charge densities of functional groups, produced ζ-potential and networking potential were dominating influential factors for adsorption fluctuation of ferric ions.
RESUMEN
Sargassum in the Caribbean region has affected the livelihood of several coastal communities due to the influx of large quantities of the seaweed in recent times. This article seeks to explore how waste Sargassum natans can be utilized to produce sodium alginate. The novelty in this research lies in the optimization process, whereby multistage extraction and precipitation were investigated over commonly used single stage processing, in an effort to maximize both yield and purity. The results showed that a maximum yield of 19% was observed after 1 stage, while the purity was 74% after 4 stages. In addition, optimization of the multistage precipitation process using the Global Optimization Toolbox in MATLAB R2017b provided a novel model which indicated that a compromise between the maximum purity and yield can be obtained at 3 stages; 71-74% and 12-16% respectively. Furthermore, characterization was done using FTIR and NMR, with results comparable to a commercial sodium alginate brand, giving absorption bands at 1610 cm-1 and 1395 cm-1 and an M/G ratio of 0.51 respectively.
RESUMEN
Cellulose nanopapers have gained significant attention in recent years as large-scale reinforcement for high-loading cellulose nanocomposites, substrates for printed electronics and filter nanopapers for water treatment. The mechanical properties of nanopapers are of fundamental importance for all these applications. Cellulose nanopapers can simply be prepared by filtering a suspension of nanocellulose, followed by heat consolidation. It was already demonstrated that the mechanical properties of cellulose nanopapers can be tailored by the fineness of the fibrils used or by modifying nanocellulose fibrils for instance by polymer adsorption, but nanocellulose blends remain underexplored. In this work, we show that the mechanical and physical properties of cellulose nanopapers can be tuned by creating nanopapers from blends of various grades of nanocellulose, i.e. (mechanically refined) bacterial cellulose or cellulose nanofibrils extracted from never-dried bleached softwood pulp by chemical and mechanical pre-treatments. We found that nanopapers made from blends of two or three nanocellulose grades show synergistic effects resulting in improved stiffness, strength, ductility, toughness and physical properties.This article is part of a discussion meeting issue 'New horizons for cellulose nanotechnology'.
RESUMEN
Basic adsorption of hydrophobic polymers from aprotic solvents was introduced as a platform technology to modify exclusively the surfaces of cellulose nanopapers. Dynamic vapor sorption demonstrated that the water vapor uptake ability of the nanopapers remained unperturbed, despite strong repellency to liquid water caused by the adsorbed hydrophobic polymer on the surface. This was enabled by the fact that the aprotic solvents used for adsorption did not swell the nanopaper unlike water that is generally applied as the adsorption medium in such systems. As case examples, the adsorptions of polystyrene (PS) and poly(trifluoroethylene) (PF3E) were followed by X-ray photoelectron spectroscopy and water contact angle measurements, backed up with morphological analysis by atomic force microscopy. The resulting nanopapers are useful in applications like moisture buffers where repellence to liquid water and ability for moisture sorption are desired qualities.