Tetraborated Intrinsically Axial Chiral Multi-resonance Thermally Activated Delayed Fluorescence Materials.

Chiral multi-resonance thermally activated delayed fluorescence (CP-MR-TADF) materials hold promise for circularly polarized organic light-emitting diodes (CP-OLEDs) and 3D displays. Herein, we present two pairs of tetraborated intrinsically axial CP-MR-TADF materials, R/S-BDBF-BOH and R/S-BDBT-BOH, with conjugation-extended bidibenzo[b,d]furan and bidibenzo[b,d]thiophene as chiral sources, which effectively participate in the distribution of the frontier molecular orbitals. Due to the heavy-atom effect, sulfur atoms are introduced to accelerate the reverse intersystem crossing process and increase the efficiency of molecules. R/S-BDBF-BOH and R/S-BDBT-BOH manifest ultra-pure blue emission with a maximum at 458/459 nm with a full width at half maximum of 27 nm, photoluminescence quantum yields of 90 %/91 %, and dissymmetry factors (|gPL|) of 6.8×10-4/8.5×10-4, respectively. Correspondingly, the CP-OLEDs exhibit good performances with an external quantum efficiency of 30.1 % and |gEL| factors of 1.2×10-3.

Mechanically Adaptive Polymers Constructed from Dynamic Coordination Equilibria.

Designing materials capable of adapting their mechanical properties in response to external stimuli is the key to preventing failure and extending their service life. However, existing mechanically adaptive polymers are hindered by limitations such as inadequate load-bearing capacity, difficulty in achieving reversible changes, high cost, and a lack of multiple responsiveness. Herein, we address these challenges using dynamic coordination bonds. A new type of mechanically adaptive material with both rate- and temperature-responsiveness was developed. Owing to the stimuli-responsiveness of the coordination equilibria, the prepared polymers, PBMBD-Fe and PBMBD-Co, exhibit mechanically adaptive properties, including temperature-sensitive strength modulation and rate-dependent impact hardening. Benefitting from the dynamic nature of the coordination bonds, the polymers exhibited impressive energy dissipation, damping capacity (loss factors of 1.15 and 2.09 at 1.0 Hz), self-healing, and 3D printing abilities, offering durable and customizable impact resistance and protective performance. The development of impact-resistant materials with comprehensive properties has potential applications in the sustainable and intelligent protection fields.

Mechanically Robust, Durable, and Multifunctional Hyper-Crosslinked Elastomer Based on Metal-Organic-Cluster Crosslinker: The Role of Topological Structure.

Polymer materials formed by conventional metal-ligand bonds have very low branch functionality, the crosslinker of such polymer usually consists of 2-4 polymer chains and a single metal ion. Thus, these materials are weak, soft, humidity-sensitive, and unable to withstand their shape under long-term service. In this work, a new hyperbranched metal-organic cluster (MOC) crosslinker containing up to 16 vinyl groups is prepared by a straightforward coordination reaction. Compared with the current typical synthesis of metal-organic cages (MOCs) or metal-organic-polyhedra (MOP) crosslinkers with complex operations and low yield, the preparation of the MOC is simple and gram-scale. Thus, MOC can serve as a high-connectivity crosslinker to construct hyper-crosslinked polymer networks. The as-prepared elastomer exhibits mechanical robustness, creep-resistance, and humidity-stability. Besides, the elastomer possesses self-healing and recyclability at mild condition as well as fluorescence stability. These impressive comprehensive properties are proven to originate from the hyper-crosslinked topological structure and microphase-separated morphology. The MOC-driven hyper-crosslinked elastomers provide a new solution for the construction of mechanically robust, durable, and multifunctional polymers.

A Self-Healing Optoacoustic Patch with High Damage Threshold and Conversion Efficiency for Biomedical Applications.

Compared with traditional piezoelectric ultrasonic devices, optoacoustic devices have unique advantages such as a simple preparation process, anti-electromagnetic interference, and wireless long-distance power supply. However, current optoacoustic devices remain limited due to a low damage threshold and energy conversion efficiency, which seriously hinder their widespread applications. In this study, using a self-healing polydimethylsiloxane (PDMS, Fe-Hpdca-PDMS) and carbon nanotube composite, a flexible optoacoustic patch is developed, which possesses the self-healing capability at room temperature, and can even recover from damage induced by cutting or laser irradiation. Moreover, this patch can generate high-intensity ultrasound (> 25 MPa) without the focusing structure. The laser damage threshold is greater than 183.44 mJ cm-2, and the optoacoustic energy conversion efficiency reaches a major achievement at 10.66 × 10-3, compared with other carbon-based nanomaterials and PDMS composites. This patch is also been successfully examined in the application of acoustic flow, thrombolysis, and wireless energy harvesting. All findings in this study provides new insight into designing and fabricating of novel ultrasound devices for biomedical applications.

A Dual-Responsive Liquid Crystal Elastomer for Multi-Level Encryption and Transient Information Display.

Information security has gained increasing attention in the past decade, leading to the development of advanced materials for anti-counterfeiting, encryption and instantaneous information display. However, it remains challenging to achieve high information security with simple encryption procedures and low-energy stimuli. Herein, a series of strain/temperature-responsive liquid crystal elastomers (LCEs) are developed to achieve dual-modal, multi-level information encryption and real-time, rewritable transient information display. The as-prepared polydomain LCEs can change from an opaque state to a transparent state under strain or temperature stimuli, with the transition strains or temperatures highly dependent on the concentration of long-chain flexible spacers. Information encrypted by different LCE inks can be decrypted under specific strains or temperatures, leading to multi-level protection of information security. Furthermore, with the combination of the phase transition of polydomain LCEs and the photothermal effect of multi-walled carbon nanotubes (MWCNTs), we achieved a repeatable transient information display by using near-infrared (NIR) light as a pen for writing. This study provides new insight into the development of advanced encryption materials with versatility and high security for broad applications.

Coordination-Modulated Metal Tetrathiafulvalene Octacarboxylate Frameworks for High-Performance Lithium-Ion Battery Anodes.

Modulation of the ligands and coordination environment of metal-organic frameworks (MOFs) has been an effective and relatively unexplored avenue for improving the anode performance of lithium-ion batteries (LIBs). In this study, three MOFs are synthesized, namely, M4 (o-TTFOB)(bpm)2 (H2 O)2 (where M is Mn, Zn, and Cd; o-H8 TTFOB is ortho-tetrathiafulvalene octabenzoate; and bpm is 2,2'-bipyrimidine), based on a new ligand o-H8 TTFOB with two adjacent carboxylates on one phenyl, which allows us to establish the impact of metal coordination on the performance of these MOFs as anode materials in LIBs. Mn-o-TTFOB and Zn-o-TTFOB, with two more uncoordinated oxygen atoms from o-TTFOB8- , show higher reversible specific capacities of 1249 mAh g-1 and 1288 mAh g-1 under 200 mA g-1 after full activation. In contrast, Cd-o-TTFOB shows a reversible capacity of 448 mAh g-1 under the same condition due to the lack of uncoordinated oxygen atoms. Crystal structure analysis, cyclic voltammetry measurements of the half-cell configurations, and density functional theory calculations have been performed to explain the lithium storage mechanism, diffusion kinetics, and structure-function relationship. This study demonstrates the advantages of MOFs with high designability in the fabrication of LIBs.

Tough, Reprocessable, and Recyclable Dynamic Covalent Polymers with Ultrastable Long-Lived Room-Temperature Phosphorescence.

Room-temperature phosphorescence (RTP) polymers, whose emission can persist for a long period after photoexcitation, are of great importance for practical applications. Herein, dynamic covalent boronic ester linkages with internal B-N coordination are incorporated into a commercial epoxy matrix. The reversible dissociation of B-N bonds upon loading provides an efficient energy dissipation pathway for the epoxy network, while the rigid epoxy matrix can inhibit the quenching of triplet excitons in boronic esters. The obtained polymers exhibit enhanced mechanical toughness (12.26 MJ m-3 ), ultralong RTP (τ=540.4 ms), and shape memory behavior. Notably, there is no apparent decrease in the RTP property upon prolonged immersion in various solvents because the networks are robust. Moreover, the dynamic bonds endow the polymers with superior reprocessablity and recyclability. These novel properties have led to their potential application for information encryption and anti-counterfeiting.

Binuclear Cu complex catalysis enabling Li-CO2 battery with a high discharge voltage above 3.0 V.

Li-CO2 batteries possess exceptional advantages in using greenhouse gases to provide electrical energy. However, these batteries following Li2CO3-product route usually deliver low output voltage (<2.5 V) and energy efficiency. Besides, Li2CO3-related parasitic reactions can further degrade battery performance. Herein, we introduce a soluble binuclear copper(I) complex as the liquid catalyst to achieve Li2C2O4 products in Li-CO2 batteries. The Li-CO2 battery using the copper(I) complex exhibits a high electromotive voltage up to 3.38 V, an increased output voltage of 3.04 V, and an enlarged discharge capacity of 5846 mAh g-1. And it shows robust cyclability over 400 cycles with additional help of Ru catalyst. We reveal that the copper(I) complex can easily capture CO2 to form a bridged Cu(II)-oxalate adduct. Subsequently reduction of the adduct occurs during discharge. This work innovatively increases the output voltage of Li-CO2 batteries to higher than 3.0 V, paving a promising avenue for the design and regulation of CO2 conversion reactions.

A variable-stiffness and healable pneumatic actuator.

Pneumatic-powered actuators are receiving increasing attention due to their widespread applications. However, their inherent low stiffness makes them incompetent in tasks requiring high load capacity or high force output. On the other hand, soft pneumatic actuators are susceptible to damage caused by over-pressuring or punctures by sharp objects. In this work, we designed and synthesized a coordination adaptable network (PETMP-AIM-Cu) with high mechanical rigidity (Young's modulus of 1.9 GPa and elongation <2% before fracturing) as well as excellent variable stiffness property (soft-rigid switching ability σ as high as 3 268 000 when ΔT = 90 °C). Combining PETMP-AIM-Cu with a self-healing elastomer based on dynamic disulfide bonds (LP-PDMS), we fabricated a new pneumatic actuator which shows high load capacity at room temperature, but can also easily deform upon heating and thus can be actuated pneumatically. Benefiting from the excellent self-healing ability of PETMP-AIM-Cu and LP-PDMS, the entire pneumatic actuator can still be actuated after being cut and healed. Such a variable-stiffness and healable pneumatic actuator would be useful for complex environmental applications.

Stretchable and self-healable spoof plasmonic meta-waveguide for wearable wireless communication system.

Microwave transmission lines in wearable systems are easily damaged after frequent mechanical deformation, posing a severe threat to wireless communication. Here, we report a new strategy to achieve stretchable microwave transmission lines with superior reliability and durability by integrating a self-healable elastomer with serpentine-geometry plasmonic meta-waveguide to support the spoof surface plasmon polariton (SSPP). After mechanical damage, the self-healable elastomer can autonomously repair itself to maintain the electromagnetic performance and mechanical strength. Meanwhile, the specially designed SSPP structure exhibits excellent stability and damage resistance. Even if the self-healing process has not been completed or the eventual repair effect is not ideal, the spoof plasmonic meta-waveguide can still maintain reliable performance. Self-healing material enhances strength and durability, while the SSPP improves stability and gives more tolerance to the self-healing process. Our design coordinates the structural design with material synthesis to maximize the advantages of the SSPP and self-healing material, significantly improving the reliability and durability of stretchable microwave transmission lines. We also perform communication quality experiments to demonstrate the potential of the proposed meta-waveguide as interconnects in future body area network systems.

Immunogenicity and protective efficacy of a DNA vaccine inducing optimal expression of the SARS-CoV-2 S gene in hACE2 mice.

The wide spread of coronavirus disease 2019 (COVID-19) has significantly threatened public health. Human herd immunity induced by vaccination is essential to fight the epidemic. Therefore, highly immunogenic and safe vaccines are necessary to control SARS-CoV-2, whose S protein is the antigenic determinant responsible for eliciting antibodies that prevent viral entry and fusion. In this study, we developed a SARS-CoV-2 DNA vaccine expressing the S protein, named pVAX-S-OP, which was optimized according to the human-origin codon preference and using polyinosinic-polycytidylic acid as an adjuvant. pVAX-S-OP induced specific antibodies and neutralizing antibodies in BALB/c and hACE2 transgenic mice. Furthermore, we observed 1.43-fold higher antibody titers in mice receiving pVAX-S-OP plus adjuvant than in those receiving pVAX-S-OP alone. Interferon gamma production in the pVAX-S-OP-immunized group was 1.58 times (CD3+CD4+IFN-gamma+) and 2.29 times (CD3+CD8+IFN-gamma+) lower than that in the pVAX-S-OP plus adjuvant group but higher than that in the control group. The pVAX-S-OP vaccine was also observed to stimulate a Th1-type immune response. When, hACE2 transgenic mice were challenged with SARS-CoV-2, qPCR detection of N and E genes showed that the viral RNA loads in pVAX-S-OP-immunized mice lung tissues were 104 times and 106 times lower than those of the PBS control group, which shows that the vaccine could reduce the amount of live virus in the lungs of hACE2 mice. In addition, pathological sections showed less lung damage in the pVAX-S-OP-immunized group. Taken together, our results demonstrated that pVAX-S-OP has significant immunogenicity, which provides support for developing SARS-CoV-2 DNA candidate vaccines.

Universal Self-Healing Poly(dimethylsiloxane) Polymer Crosslinked Predominantly by Physical Entanglements.

Harsh conditions are inevitable for long-term use of self-healing polymers. However, the majority of reported self-healing materials cannot remain stable under harsh conditions due to the presence of vulnerable dynamic crosslinking sites. Herein, a universal self-healing poly(dimethylsiloxane) (PDMS) polymer is reported. In our design, the PDMS polymer chains are crosslinked predominantly through physical entanglements. Owing to the invulnerable nature of the entanglement junctions and high mobility of polymer chains, the as-synthesized polymer exhibits autonomous self-healing capabilities not only under ambient conditions but also in a variety of harsh environments, including aqueous solutions, organic solvents, and extreme conditions (strong acid/alkali, redox agents, freezing temperature). Moreover, this polymer can be easily integrated with a eutectic gallium-indium (EGaIn) alloy to achieve layer-by-layer self-healing electronic skin sensors, which realize the combination of excellent electrical conductivity, long-term sensing stability, and universal self-healing capability.

Genetic characterization of a new NSP2-deletion porcine reproductive and Respiratory Syndrome Virus in China.

The Porcine Reproductive and Respiratory Syndrome Virus (PRRSV) cause a huge economic loss around the pig industry worldwide; the NADC30-like PRRSV have attracted much attention outbreaks in China in recent years. Recombination between PRRSV subtypes, point mutations, insertions and deletions that contribute to the emergence of new variants in the genome. In this study, the PRRSV-HB-16-China-2019 strain's full-length genomic sequence shares 93.0% nucleotide similarity to NADC30 PRRSV without any gene insertion. Compared with VR-2332, it has an NSP2 coding region that is different from NADC30, which has a discontinuous 206-aa (111-aa from position 323 to 433 and 95-aa from position 476 to 570) deletion. Compared with other NADC30-Like strains, it has a discontinuous 75-amino acid (75-aa from position 476 to 552) deletion, which was first reported. Notably, the strain, PRRSV-HB-16-China-2019, contained an addition a 1-aa deletion in ORF5 and a unique 3-nt deletion in 3'-UTR similar to NADC30, the strain is recombined between a NADC30-like strain and a vaccine strain named RespPRRS MLV(parental strain VR-2332). Our findings indicate that PRRSV-HB-16-China-2019 is a new NSP2-deletion NADC30-like strain with certain deletions and mutations. Our results show that the emergence of the new NADC30-like strain has increased the difficulty of PRRSV prevention in China.

A Dielectric Elastomer Actuator That Can Self-Heal Integrally.

Dielectric actuators are prone to be worn or partially damaged when operating at high electric fields. The introduction of self-healing features into dielectric actuators is favorable for extending its life span and security. Although many attempts have been made to produce self-healing dielectric actuators, most of them focus on the healing of either the electrodes or the dielectric layers. A dielectric actuator that exhibits integral self-healing is still unprecedented. Meanwhile, realizing integral self-healing in dielectric actuator is highly challenging because both the electrode and the dielectric layer need to be healed while the interface between the electrode and the dielectric layer should remain unaffected during the healing process. In this paper, we synthesized self-healing polydimethylsiloxane (PDMS) polymers containing different amounts of polyaniline (PANI) (denoted as PDMS-PANIn, where n represents the weight percentage of PANI) as the dielectric layer and electrode, respectively. PDMS-PANI2.5 polymer exhibits good dielectric properties (ε = 11.11 at 50 Hz) and was used as the dielectric layer, while PDMS-PANI20 polymer having a high conductivity of 4.5 × 10-5 S/cm was used as the electrode. As both of them have excellent self-healing ability and are compatible and diffusible to each other, the entire actuator device can still cause actuated strain after cutting and healing at room temperature for 48 h. Our strategy for realizing integral self-healing of actuator is also applicable to other electronic devices.

A Self-Healing Polymer with Fast Elastic Recovery upon Stretching.

The design of polymers that exhibit both good elasticity and self-healing properties is a highly challenging task. In spite of this, the literature reports highly stretchable self-healing polymers, but most of them exhibit slow elastic recovery behavior, i.e., they can only recover to their original length upon relaxation for a long time after stretching. Herein, a self-healing polymer with a fast elastic recovery property is demonstrated. We used 4-[tris(4-formylphenyl)methyl]benzaldehyde (TFPM) as a tetratopic linker to crosslink a poly(dimethylsiloxane) backbone, and obtained a self-healing polymer with high stretchability and fast elastic recovery upon stretching. The strain at break of the as-prepared polymer is observed at about 1400%. The polymer can immediately recover to its original length after being stretched. The damaged sample can be healed at room temperature with a healing efficiency up to 93% within 1 h. Such a polymer can be used for various applications, such as functioning as substrates or matrixes in soft actuators, electronic skins, biochips, and biosensors with prolonged lifetimes.

First detection and genomic characterization of porcine circovirus 3 in mosquitoes from pig farms in China.

The porcine circovirus type 3 (PCV3) becomes an important causative agent of swine disease since its discovery in 2016. PCV3 infection exhibits a wide range of clinical syndromes causing substantial economic losses in swine industry. Previous studies have reported the detection of numerous known viruses including circovirus in mosquitoes. However, the transmission of PCV3 in field-caught mosquitoes remains largely unknown. This study aims to detect PCV3 infection in mosquitoes and analyze its genomic characteristics. Here, we performed a PCR to detect the PCV3 in 269 mosquito samples collected from pig farms located in Heilongjiang, Jilin, and Yunnan provinces. The proportion of PCV3-positive mosquitoes was 32.0 % (86/269), ranging from 21.4%-42.5% at farm level, which may imply that mosquito serves as a route of transmission for PCV3. To determine the possible origin of PCV3 in mosquitoes, 80 pig serum samples were collected from the pig farms where mosquito sampling was also performed. The proportion of PCV3-positive farms ranged from 15.0%-30.0 % in which infection of positive pigs positively correlated with mosquitoes carrying the virus. Additionally, we sequenced the entire genome of 6 strains of PCV3 in mosquitoes and 2 strains of PCV3 in pigs. Sequence analysis indicated a 100 % nucleotide similarity between mosquito and pig viral isolates that were all collected from similar farms. Phylogenetic analysis showed that PCV3 could be divided into two clades, PCV3a and PCV3b, and the PCV3 strains isolated in mosquitoes were distributed on the two clades. Our results demonstrate that mosquitoes may serve as a potential transmission vector in the life-cycle of PCV3, revealing possible transmission routes of PCV3.

Newcastle Disease Virus Inhibits the Proliferation of T Cells Induced by Dendritic Cells In Vitro and In Vivo.

Newcastle disease virus (NDV) infects poultry and antagonizes host immunity via several mechanisms. Dendritic cells (DCs) are characterized as specialized antigen presenting cells, bridging innate and adaptive immunity and regulating host resistance to viral invasion. However, there is little specific knowledge of the role of DCs in NDV infection. In this study, the representative NDV lentogenic strain LaSota was used to explore whether murine bone marrow derived DCs mature following infection. We examined surface molecule expression and cytokine release from DCs as well as proliferation and activation of T cells in vivo and in vitro in the context of NDV. The results demonstrated that infection with lentogenic strain LaSota induced a phenotypic maturation of immature DCs (imDCs), which actually led to curtailed T cell responses. Upon infection, the phenotypic maturation of DCs was reflected by markedly enhanced MHC and costimulatory molecule expression and secretion of proinflammatory cytokines. Nevertheless, NDV-infected DCs produced the anti-inflammatory cytokine IL-10 and attenuated T cell proliferation, inducing Th2-biased responses. Therefore, our study reveals a novel understanding that DCs are phenotypically mature but dysfunctional in priming T cell responses during NDV infection.

Self-Healing Polymers Based on Coordination Bonds.

Self-healing ability is an important survival feature in nature, with which living beings can spontaneously repair damage when wounded. Inspired by nature, people have designed and synthesized many self-healing materials by encapsulating healing agents or incorporating reversible covalent bonds or noncovalent interactions into a polymer matrix. Among the noncovalent interactions, the coordination bond is demonstrated to be effective for constructing highly efficient self-healing polymers. Moreover, with the presence of functional metal ions or ligands and dynamic metal-ligand bonds, self-healing polymers can show various functions such as dielectrics, luminescence, magnetism, catalysis, stimuli-responsiveness, and shape-memory behavior. Herein, the recent developments and achievements made in the field of self-healing polymers based on coordination bonds are presented. The advantages of coordination bonds in constructing self-healing polymers are highlighted, the various metal-ligand bonds being utilized in self-healing polymers are summarized, and examples of functional self-healing polymers originating from metal-ligand interactions are given. Finally, a perspective is included addressing the promises and challenges for the future development of self-healing polymers based on coordination bonds.

A Self-Healing and Shape Memory Polymer that Functions at Body Temperature.

Dual-functional polymeric system combining shape memory with self-healing properties has attracted increasingly interests of researchers, as both of these properties are intelligent and promising characteristics. Moreover, shape memory polymer that functions at human body temperature (37 °C) are desirable because of their potential applications in biomedical field. Herein, we designed a polymer network with a permanent covalent crosslinking and abundant weak hydrogen bonds. The former introduces elasticity responsible and maintain the permanent shape, and the latter contributes to the temporary shape via network rearrangement. The obtained PDMS-COO-E polymer films exhibit excellent mechanical properties and the capability to efficiently self-heal for 6 h at room temperature. Furthermore, the samples turn from a viscous state into an elastic state at 37 °C. Therefore, this polymer has shape memory effects triggered by body temperature. This unique material will have a wide range of applications in many fields, containing wearable electronics, biomedical devices, and 4D printing.

KRAS Exon 3 and PTEN Exon 7 Mutations in Small-cell Lung Cancer.

Small cell lung cancer (SCLC) is recognized as one of the most aggressive and fatal malignant tumors. No significant improvement has been made to prolong the survival of SCLC patients. This study aimed to examine the mutation status of K-Ras (KRAS) and phosphatase and tensin homolog (PTEN) in SCLC patients in order to identify potential therapeutic targets for SCLC. Nineteen primary SCLC tumor specimens were enrolled in the study. Direct sequencing was performed to detect the mutations of KRAS exon 3 and PTEN exon 7 in the specimens. Kaplan- Meier and Cox regression analysis was performed to determine the overall survival (OS) of these SCLC patients. KRAS exon 3 mutation was found in 4 (21%) SCLC patients, and PTEN exon 7 mutation in only 1 (5%) SCLC patient. Kaplan Meier analysis showed that clinical stage and brain metastasis were significantly associated with OS (both P<0.05), but neither KRAS exon 3 mutation nor PTEN exon 7 mutation was significantly associated with OS (P>0.05). Cox proportional hazards regression model indicated that extensive stage of disease was the only independent negative prognostic factor for OS in SCLC patients. In conclusion, KRAS exon 3 and PTEN exon 7 mutations had no significant impact on OS of SCLC patients. Further study is still necessary to validate the molecular profiles of SCLC.