Stability and integrity of self-assembled bovine parvovirus virus­like particles (BPV­VLPs) of VP2 and combination of VP1VP2 assisted by baculovirus-insect cell expression: a potential logistical platform for vaccine deployment.

BACKGROUND: Bovine parvovirus (BPV) is an autonomous DNA virus with a smaller molecular size and subtle differences in its structural proteins, unlike other animal parvoviruses. More importantly, this virus has the potential to produce visible to silent economic catastrophes in the livestock business, despite receiving very little attention. Parvoviral virus-like particles (VLPs) as vaccines and as logistical platforms for vaccine deployment are well studied. However, no single experimental report on the role of VP1 in the assembly and stability of BPV-VLPs is available. Furthermore, the self-assembly, integrity and stability of the VLPs of recombinant BPV VP2 in comparison to VP1 VP2 Cap proteins using any expression method has not been studied previously. In this study, we experimentally evaluated the self-assembling ability with which BPV virus-like particles (VLPs) could be synthesized from a single structural protein (VP2) and by integrating both VP2 and VP1 amino acid sequences. METHODS: In silico and experimental cloning methods were carried out. His-tagged and without-His-tag VP2 and V1VP2-encoding amino acid sequences were cloned and inserted into pFastbacdual, and insect cell-generated recombinant protein was evaluated by SDS‒PAGE and western blot. Period of infectivity and expression level were determined by IFA. The integrity and stability of the BPV VLPs were evaluated by transmission electron microscopy. The secondary structure of the BPV VLPs from both VP2 and V1VP2 was analyzed by circular dichroism. RESULTS: Our findings show that VP2 alone was equally expressed and purified into detectable proteins, and the stability at different temperatures and pH values was not appreciably different between the two kinds of VLPs. Furthermore, BPV-VP2 VLPs were praised for their greater purity and integrity than BPV-VP1VP2 VLPs, as indicated by SDS‒PAGE. Therefore, our research demonstrates that the function of VP1 has no bearing on the stability or integrity of BPV-VLPs. CONCLUSIONS: In summary, incredible physiochemically stable BPV VP2-derived VLPs have been found to be promising candidates for the development of multivalent vaccines and immunodiagnostic kits against enteric viruses and to carry heterogeneous epitopes for various economically important livestock diseases.

Experimental Study on Laminar Burning Characteristics of Premixed 2,5-Dimethylfuran/Air Mixtures at Elevated Pressures and Temperatures.

Experimental studies of laminar burning velocity and flame instabilities of 2,5-dimethylfuran (DMF) were conducted at different equivalence ratios (from 0.9 to 1.3), initial pressures (from 0.1 to 0.8 MPa), and initial temperatures (from 393 to 493 K) by the method of the schlieren and high-speed photography system in the constant-volume combustion bomb. The results showed that the laminar burning velocity of the DMF/air flame decreased with increasing initial pressure and increased with increasing initial temperature. The maximum laminar burning velocity occurred at φ = 1.1, regardless of the initial pressure and temperature conditions. The power law fitting of baric coefficients, thermal coefficients, and laminar burning velocity was obtained, and the laminar burning velocity of DMF/air flame can be predicted well in the study range. The diffusive-thermal instability of the DMF/air flame was more pronounced during rich combustion. Increasing the initial pressure increased both the diffusive-thermal instability and the hydrodynamic instability of the flame, while increasing the initial temperature increased the diffusive-thermal instability of the flame, which was mainly responsible for flame propagation. In addition, the Markstein length, density ratio, flame thickness, critical radius, acceleration index, and classification excess of the DMF/air flame were investigated. The results of this paper provide a theoretical support for the application of DMF in engineering.

Experimental investigation on the characteristics of supersonic fuel spray and configurations of induced shock waves.

The macro characteristics and configurations of induced shock waves of the supersonic sprays are investigated by experimental methods. Visualization study of spray shape is carried out with the high-speed camera. The macro characteristics including spray tip penetration, velocity of spray tip and spray angle are analyzed. The configurations of shock waves are investigated by Schlieren technique. For supersonic sprays, the concept of spray front angle is presented. Effects of Mach number of spray on the spray front angle are investigated. The results show that the shape of spray tip is similar to blunt body when fuel spray is at transonic region. If spray entered the supersonic region, the oblique shock waves are induced instead of normal shock wave. With the velocity of spray increasing, the spray front angle and shock wave angle are increased. The tip region of the supersonic fuel spray is commonly formed a cone. Mean droplet diameter of fuel spray is measured using Malvern's Spraytec. Then the mean droplet diameter results are compared with three popular empirical models (Hiroyasu's, Varde's and Merrigton's model). It is found that the Merrigton's model shows a relative good correlation between models and experimental results. Finally, exponent of injection velocity in the Merrigton's model is fitted with experimental results.

Relative bioavailability of generic and branded acetylcysteine effervescent tablets: A single-dose, open-label, randomized-sequence, two-period crossover study in fasting healthy Chinese male volunteers.

BACKGROUND: Acetylcysteine may be used as a muco- lytic agent for the treatment of chronic bronchitis, chronic obstructive pulmonary disease, and other pulmonary diseases complicated by the production of viscous mucus. However, little is known of its pharmacokinetic properties when given orally in healthy volunteers, particularly in a Chinese Han population. This study was conducted to provide support for the marketing of a generic product in China. OBJECTIVE: The purpose of this study was to compare the pharmacokinetics and relative bioavailability of a generic test formulation and a branded reference formulation of acetylcysteine in fasting healthy Chinese male volunteers. METHODS: A single-dose, open-label, randomized-sequence, 2-period crossover design with a 7-day washout period between doses was used in this study. Healthy Chinese male nonsmokers aged 18 to 40 years with a body mass index (BMI) of 19 to 25 kg/m(2) were selected. Eligible volunteers were randomly assigned to receive acetylcysteine 600 mg PO as either the test formulation (3 tablets of 200 mg each) or reference formulation (1 tablet of 600 mg) under fasting conditions. A total of 15 serial blood samples were collected over a 24-hour interval, and total plasma acetylcysteine concentrations were analyzed by a validated liquid chromatography-isotopic dilution mass spectrometry method. Pharmacokinetic parameters (C(max), T(max), t(½) AUC(0-t), and AUC(0-∞) were calculated and analyzed statistically. The 2 formulations were considered bioequivalent if the 90% CIs of the log-transformed ratios (test/reference) of C(max) and AUC were within the predetermined bioequivalence ranges (70%-143% for C(max); 80%-125% for AUC), as established by the State Food and Drug Administration of China. Tolerability was determined by vital signs, clinical laboratory tests, 12-lead ECGs, physical examinations, and interviews with the subjects about adverse events (AEs). RESULTS: A total of 24 healthy Chinese Han male volunteers were enrolled in and completed the study (mean [SD] age, 25.0 [2.4] years; height, 173.0 [5.6] cm; weight, 65.9 [6.4] kg; BMI, 22.0 [1.7] kg/m(2)). No formulation, period, or sequence effects were observed. The 90% CIs for the log-transformed C(max), AUC(0-t), and AUC(0-∞) were 89.7% to 103.8%, 86.7% to 101.7%, and 87.7% to 102.4%, respectively, which met the predetermined criteria for assuming bioequivalence. Two subjects (8.3%) experienced 2 mild AEs (increase in total bile acid and prolongation of the QT interval), which were not considered to be related to study drug administration. CONCLUSIONS: This single-dose study of acetylcysteine 600 mg PO found that the 3 tablets of the generic test formulation and 1 tablet of the branded reference formulation met the regulatory criteria for assuming bioequivalence in these fasting healthy Chinese male volunteers. Both formulations were generally well tolerated.

Pharmacokinetics and bioequivalence evaluation of two different atorvastatin calcium 10-mg tablets: A single-dose, randomized-sequence, open-label, two-period crossover study in healthy fasted Chinese adult males.

BACKGROUND: Atorvastatin calcium is a 3-hydroxy-3-methylglutaryl-coenzyme A reductase inhibitor indicated for the prevention of cardiovascular disease and for the treatment of dyslipidemia. Information on the pharmacokinetics of atorvastatin in a Chinese population is lacking, and regulatory requirements necessitate a bioequivalence study for the marketing of a generic product in China. OBJECTIVE: The aim of the present study was to assess the pharmacokinetics and bioequivalence of a test and branded reference formulation of atorvastatin calcium 10-mg tablets in healthy fasted Chinese male volunteers. METHODS: This was a single-dose, randomized-sequence, open-label, 2-period crossover study with a 2-week washout period between doses. Healthy Chinese males were randomly assigned to receive 20 mg of either the test or reference formulation, and 13 blood samples were obtained over a 48-hour interval. Plasma concentrations of parent atorvastatin and ortho-hydroxy-atorvastatin (primary active metabolite) were simultaneously determined using a validated liquid chromatography-isotopic dilution mass spectrometry method. Pharmacokinetic parameters, including C(max), T(max), t((1/2)), AUC(0-t), and AUC(0-infinity)), were calculated. The 2 formulations were to be considered bioequivalent if 90% CIs for the log transformed ratios of AUC and C(max) of atorvastatin were within the predetermined bioequivalence range (0.80-1.25 for AUC and 0.70-1.43 for C(max)) as established by the State Food and Drug Administration of China. Tolerability was evaluated throughout the study by vital signs monitoring, physical examinations, 12-lead ECGs, and subject interviews on adverse events (AEs). RESULTS: A total of 66 subjects were assessed for inclusion; 20 were excluded prior to study initiation. Of the 46 healthy subjects (mean [SD] age, 24.1 [2.5] years; height, 170.8 [5.1] cm; weight, 64.6 [6.4] kg; body mass index (BMI), 22.1 [1.7] kg/m(2)) who completed the study, 45 subjects (mean [SD] age, 24.1 [2.5] years; height, 171.1 [4.9] cm; weight, 64.8 [6.3] kg; BMI, 22.1 [1.7] kg/m(2)) were included in the pharmacokinetic and bioequivalence analyses; 1 subject was excluded from these analyses because he mistakenly received the same formulation in both periods. No period or sequence effect was observed. The mean values of C(max), AUC(0-t), and AUC(0-infinity)) for the test and reference formulations of atorvastatin (8.78 and 10.76 ng/mL, 38.22 and 40.02 ng/mL/h, 42.73 and 44.51 ng/mL/h, respectively) and ortho-hydroxy-atorvastatin (5.78 and 5.77 ng/mL, 47.32 and 48.47 ng/mL/h, 52.36 and 53.14 ng/mL/h) were not significantly different. The 90% CIs for natural log-transformed ratios of C(max), AUC(0-t), and AUC(0-infinity)) of both atorvastatin (0.73-0.91, 0.92-1.02, and 0.91-1.01, respectively) and ortho-hydroxy-atorvastatin (0.83-1.05, 0.92-1.02, and 0.93-1.02) were within the bioequivalence acceptance limits. Three subjects (6.5%) reported a total of 4 mild AEs (1 abdominal discomfort and 3 venipuncture syncope), which were not considered to be associated with administration of the study drug. CONCLUSIONS: This single-dose (20 mg) study found that the test and reference formulations of atorvastatin calcium 10-mg tablet met the regulatory definition for assuming bioequivalence in these healthy fasted Chinese male volunteers. Both formulations were generally well tolerated in the population studied. Chinese National Registry Code: 2007L02512.