RESUMEN
Cadherin-mediated tension at adherens junctions (AJs) is fundamental for cell-cell adhesion and maintaining epithelial integrity. Despite the importance of manipulating AJs to dissect cell-cell interactions, existing three-dimensional (3D) multicellular models have not adequately addressed the precise manipulation of these junctions. To fill this gap, we introduce E-cadherin-modified tension gauge tethers (TGTs) at the junctions within spheroids. The system enables both quantification and modulation of junctional tension with specific DNA triggers. Using rupture-induced fluorescence, we successfully measure mechanical forces in 3D spheroids. Furthermore, mechanically strong TGTs can maintain normal E-cadherin-mediated adhesion. Employing toehold-mediated strand displacement allowed us to disrupt E-cadherin-specific cell-cell adhesion, consequently altering intracellular tension within the spheroids. Our methodology offers a robust and precise way to manipulate cell-cell adhesion and intracellular mechanics in spheroid models.
Asunto(s)
Cadherinas , Adhesión Celular , Esferoides Celulares , Cadherinas/metabolismo , Esferoides Celulares/metabolismo , Esferoides Celulares/citología , Humanos , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Uniones Adherentes/metabolismo , Ensayo de Materiales , Tamaño de la PartículaRESUMEN
Lake Winnipeg in Manitoba, Canada is heavily impacted by harmful algal blooms that contain non-protein amino acids (NPAAs) produced by cyanobacteria: N-(2-aminoethyl)glycine (AEG), ß-aminomethyl-L-alanine (BAMA), ß-N-methylamino-L-alanine (BMAA), and 2,4-diaminobutyric acid (DAB). Our objective was to investigate the impact of microbial diversity on NPAA production by cyanobacteria using semi-purified crude cyanobacterial cultures established from field samples collected by the Lake Winnipeg Research Consortium between 2016 and 2021. NPAAs were detected and quantified by ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) using validated analytical methods, while Shannon and Simpson alpha diversity scores were determined from 16S rRNA metagenomic sequences. Alpha diversity in isolate cultures was significantly decreased compared to crude cyanobacterial cultures (p < 0.001), indicating successful semi-purification. BMAA and AEG concentrations were higher in crude compared to isolate cultures (p < 0.0001), and AEG concentrations were correlated to the alpha diversity in cultures (r = 0.554; p < 0.0001). BAMA concentrations were increased in isolate cultures (p < 0.05), while DAB concentrations were similar in crude and isolate cultures. These results demonstrate that microbial community complexity impacts NPAA production by cyanobacteria and related organisms.
Asunto(s)
Cianobacterias , Lagos , Lagos/microbiología , Cianobacterias/metabolismo , Cianobacterias/genética , Cianobacterias/aislamiento & purificación , Manitoba , Floraciones de Algas Nocivas , Aminoácidos/análisis , Aminoácidos/metabolismo , Espectrometría de Masas en Tándem , Biodiversidad , Microbiota , Toxinas de CianobacteriasRESUMEN
Just as a single polypeptide strand can self-fold into a complex 3D structure, a single strand of DNA can self-fold into DNA origami. Most DNA origami structures (i.e., the scaffold-staple and DNA tiling systems) utilize hundreds of short single-stranded DNA. As such, these structures come with challenges inherent to intermolecular construction. Many assembly challenges involving intermolecular interactions can be resolved if the origami structure is constructed from one DNA strand, where folding is not concentration dependent, the folded structure is more resistant to nuclease degradation, and the synthesis can be achieved at an industrial scale at a thousandth of the cost. This review discusses the design principles and considerations employed in single-stranded DNA origami and its potential benefits and drawbacks.
RESUMEN
DNA-PAINT enabled super-resolution imaging through the transient binding of fluorescently-labelled single-stranded DNA (ssDNA) imagers to target ssDNA. However, its performance is constrained by imager background fluorescence, resulting in relatively long image acquisition and potential artifacts. We designed a molecular beacon (MB) as the PAINT imager. Unbound MB in solution reduces the background fluorescence due to its natively quenched state. They are fluorogenic upon binding to target DNA to create individual fluorescence events. We demonstrate that MB-PAINT provides localization precision similar to traditional linear imager DNA-PAINT. We also show that MB-PAINT is ideally suited for fast super-resolution imaging of molecular tension probes in living cells, eliminating the potential of artifacts from free-diffusing imagers in traditional DNA-PAINT at the cell-substrate interface.
Asunto(s)
ADN , Nanotecnología , Nanotecnología/métodos , ADN/química , ADN de Cadena Simple , Microscopía Fluorescente/métodos , Transferencia Resonante de Energía de FluorescenciaRESUMEN
OBJECTIVE: Type 2 diabetes mellitus (T2D) is the result of a dysregulation of insulin production and signalling, leading to an increase in both glucose concentration and pro-inflammatory cytokines such as interleukin (IL)-6 and tumour necrosis factor (TNF)-α. Previous work showed that T2D patients exhibited immune dysfunction associated with increased adhesion molecule expression on endothelial cell surfaces, accompanied by decreased neutrophil rolling velocity on the endothelial cell surface. Changes in cell rolling adhesion have direct vascular and immune complications such as atherosclerosis and reduced healing time in T2D patients. While previous studies focused primarily on how endothelial cells affect neutrophil rolling under T2D conditions, little is known about changes to neutrophils that affect their rolling. In this study, we aim to show how the rolling behaviour of neutrophils is affected by T2D conditions on a controlled substrate. RESULTS: We found that neutrophils cultured in T2D-serum mimicking media increased cell rolling velocity compared to neutrophils under normal conditions. Specifically, glucose alone is responsible for higher rolling velocity. While cytokines further increase the rolling velocity, they also reduce the cell size. Both glucose and cytokines likely reduce the function of P-selectin Glycoprotein Ligand-1 (PSGL-1) on neutrophils.
Asunto(s)
Diabetes Mellitus Tipo 2 , Neutrófilos , Humanos , Células Endoteliales , Adherencias Tisulares , Glucosa/farmacología , Citocinas , Interleucina-6RESUMEN
Extracellular vesicles (EVs) are highly promising as drug delivery vehicles due to their nanoscale size, stability and biocompatibility. EVs possess natural targeting abilities and are known to traverse long distances to reach their target cells. This long-range organotropism and the ability to penetrate hard-to-reach tissues, including the brain, have sparked interest in using EVs for the targeted delivery of pharmaceuticals. In addition, EVs can be readily harvested from an individual's biofluids, making them especially suitable for personalized medicine applications. However, the targeting abilities of unmodified EVs have proven to be insufficient for clinical applications. Multiple attempts have been made to bioengineer EVs to fine-tune their on-target binding. Here, we summarize the current state of knowledge on the natural targeting abilities of native EVs. We also critically discuss the strategies to functionalize EV surfaces for superior long-distance targeting of specific tissues and cells. Finally, we review the challenges in achieving specific on-target binding of EV nanocarriers.
RESUMEN
Melatonin is a human neurotransmitter and plant signalling metabolite that perceives and directs plant metabolism. The mechanisms of melatonin action in plants remain undefined. We hypothesized that roots have a melatonin-specific receptor and/or transporter that can respond to melatonin-mediating pharmaceuticals. To test this hypothesis Arabidopsis seedlings were grown with melatonin pharmaceutical receptor agonists: ramelteon and tasimelteon, and/or antagonists: luzindole and 4-P-PDOT. Ramelteon was found both to mimic and competitively inhibit melatonin metabolism in plants. Due to the higher selectivity of ramelteon for the MT1 receptor type in humans, a sequence homology search for MT1 in Arabidopsis identified the rhomboid-like protein 7 (RBL7). In physiological studies, Arabidopsis rbl7 mutants were less responsive to ramelteon and melatonin. Quantum dot visualizations of the effects of ramelteon on melatonin binding to root cell membranes revealed a potential mechanism. We propose that RBL7 is a melatonin-interacting protein that directs root architecture and growth in a mechanism that is responsive to environmental factors.
Asunto(s)
Arabidopsis , Melatonina , Animales , Arabidopsis/genética , Arabidopsis/metabolismo , Humanos , Mamíferos/metabolismo , Melatonina/farmacología , Receptor de Melatonina MT1/agonistas , Receptor de Melatonina MT1/metabolismo , Receptor de Melatonina MT2/agonistas , Receptor de Melatonina MT2/metabolismoRESUMEN
The advancement in microfluidics has provided an excellent opportunity for shifting from conventional sub-micron-sized isolation and purification methods to more robust and cost-effective lab-on-chip platforms. The acoustic-driven separation approach applies differential forces acting on target particles, guiding them towards different paths in a label-free and biocompatible manner. The main challenges in designing the acoustofluidic-based isolation platforms are minimizing the reflected radio frequency signal power to achieve the highest acoustic radiation force acting on micro/nano-sized particles and tuning the bandwidth of the acoustic resonator in an acceptable range for efficient size-based binning of particles. Due to the complexity of the physics involved in acoustic-based separations, the current existing lack in performance predictive understanding makes designing these miniature systems iterative and resource-intensive. This study introduces a unique approach for design automation of acoustofluidic devices by integrating the machine learning and multi-objective heuristic optimization approaches. First, a neural network-based prediction platform was developed to predict the resonator's frequency response according to different geometrical configurations of interdigitated transducers In the next step, the multi-objective optimization approach was executed for extracting the optimum design features for maximum possible device performance according to decision-maker criteria. The results show that the proposed methodology can significantly improve the fine-tuned IDT designs with minimum power loss and maximum working frequency range. The examination of the power loss and bandwidth on the alternation and distribution of the acoustic pressure inside the microfluidic channel was carried out by conducting a 3D finite element-based simulation. The proposed methodology improves the performance of the acoustic transducer by overcoming the constraints related to bandwidth operation, the magnitude of acoustic radiation force on particles, and the distribution of pressure acoustic inside the microchannel.
RESUMEN
Rolling adhesion, facilitated by selectin-mediated interactions, is a highly dynamic, passive motility in recruiting leukocytes to the site of inflammation. This phenomenon occurs in postcapillary venules, where blood flow pushes leukocytes in a rolling motion on the endothelial cells. Stable rolling requires a delicate balance between adhesion bond formation and their mechanically-driven dissociation, allowing the cell to remain attached to the surface while rolling in the direction of flow. Unlike other adhesion processes occurring in relatively static environments, rolling adhesion is highly dynamic as the rolling cells travel over thousands of microns at tens of microns per second. Consequently, conventional mechanobiology methods such as traction force microscopy are unsuitable for measuring the individual adhesion events and the associated molecular forces due to the short timescale and high sensitivity required. Here, we describe our latest implementation of the adhesion footprint assay to image the P-selectin: PSGL-1 interactions in rolling adhesion at the molecular level. This method utilizes irreversible DNA-based tension gauge tethers to produce a permanent history of molecular adhesion events in the form of fluorescence tracks. These tracks can be imaged in two ways: (1) stitching together thousands of diffraction-limited images to produce a large field of view, enabling the extraction of adhesion footprint of each rolling cell over thousands of microns in length, (2) performing DNA-PAINT to reconstruct super-resolution images of the fluorescence tracks within a small field of view. In this study, the adhesion footprint assay was used to study HL-60 cells rolling at different shear stresses. In doing so, we were able to image the spatial distribution of the P-selectin: PSGL-1 interaction and gain insight into their molecular forces through fluorescence intensity. Thus, this method provides the groundwork for the quantitative investigation of the various cell-surface interactions involved in rolling adhesion at the molecular level.
Asunto(s)
Células Endoteliales , Leucocitos , Adhesión Celular , Humanos , Estrés Mecánico , VénulasRESUMEN
Hyaluronic acid is a native extra-cellular matrix derivative that promises unique properties, such as anti-inflammatory response and cell-signaling with tissue-specific applications under its bioactive properties. Here, we investigate the importance of the duration of synthesis to obtain photocrosslinkable methacrylated hyaluronic acid (MeHA) with high degree of substitution. MeHA with high degree of substitution can result in rapid photocrosslinking and can be used as a bioink for stereolithographic (SLA) three dimensional 3D bioprinting. Increased degree of substitution results Our findings show that a ten-day synthesis results in an 88% degree of methacrylation (DM), whereas three-day and five-day syntheses result in 32% and 42% DM, respectively. The rheological characterization revealed an increased rate of photopolymerization with increasing DM. Further, we developed a hybrid bioink to overcome the non-cell-adhesive nature of MeHA by combining it with gelatin methacryloyl (GelMA) to fabricate 3D cell-laden hydrogel scaffolds. The hybrid bioink exhibited a 55% enhancement in stiffness compared to MeHA only and enabled cell-adhesion while maintaining high cell viability. Investigations also revealed that the hybrid bioink was a more suitable candidate for stereolithography (SLA) 3D bioprinting than MeHA because of its mechanical strength, printability, and cell-adhesive nature. This research lays out a firm foundation for the development of a stable hybrid bioink with MeHA and GelMA for first-ever use with SLA 3D bioprinting.
Asunto(s)
Bioimpresión , Gelatina , Ácido Hialurónico , Hidrogeles , Impresión Tridimensional , Estereolitografía , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Rolling adhesion is a unique process in which the adhesion events are short-lived and operate under highly nonequilibrium conditions. These characteristics pose a challenge in molecular force quantification, where in situ measurement of these forces cannot be achieved with molecular force sensors that probe near equilibrium. Here, we demonstrated a quantitative adhesion footprint assay combining DNA-based nonequilibrium force probes and modeling to measure the molecular force involved in fast rolling adhesion. We were able to directly profile the ensemble molecular force distribution in our system during rolling adhesion with a dynamic range between 0 and 18 pN. Our results showed that the shear stress driving bead rolling motility directly controls the molecular tension on the probe-conjugated adhesion complex. Furthermore, the shear stress can steer the dissociation bias of components within the molecular force probe complex, favoring either DNA probe dissociation or receptor-ligand dissociation.
RESUMEN
Traditional cell/particle isolation methods are time-consuming and expensive and can lead to morphology disruptions due to high induced shear stress. To address these problems, novel lab-on-a-chip-based purification methods have been employed. Among various methods introduced for the separation and purification of cells and synthetics particles, acoustofluidics has been one of the most effective methods. Unlike traditional separation techniques carried out in clinical laboratories based on chemical properties, the acoustofluidic process relies on the physical properties of the sample. Using acoustofluidics, manipulating cells and particles can be achieved in a label-free, contact-free, and highly biocompatible manner. To optimize the functionality of the platform, the numerical study should be taken into account before conducting experimental tests to save time and reduce fabrication expenses. Most current numerical studies have only considered one-dimensional harmonic standing waves to simulate the acoustic pressure distribution. However, one-dimensional simulations cannot calculate the actual acoustic pressure distribution inside the microchannel due to its limitation in considering longitudinal waves. To address this limitation, a two-dimensional numerical simulation was conducted in this study. Our numerical simulation investigates the effects of the platform geometrical and operational conditions on the separation efficiency. Next, the optimal values are tested in an experimental setting to validate these optimal parameters and conditions. This work provides a guideline for future acoustofluidic chip designs with a high degree of reproducibility and efficiency.
RESUMEN
Leukocyte rolling adhesion, facilitated by selectin-mediated interactions, is a highly dynamic process in which cells roll along the endothelial surface of blood vessel walls to reach the site of infection. The most common approach to investigate cell-substrate adhesion is to analyze the cell rolling velocity in response to shear stress changes. It is assumed that changes in rolling velocity indicate changes in adhesion strength. In general, cell rolling velocity is studied at the population level as an average velocity corresponding to given shear stress. However, no statistical investigation has been performed on the instantaneous velocity distribution. In this study, we first developed a method to remove systematic noise and revealed the true velocity distribution to exhibit a log-normal profile. We then demonstrated that the log-normal distribution describes the instantaneous velocity at both the population and single-cell levels across the physiological flow rates. The log-normal parameters capture the cell motion more accurately than the mean and median velocities, which are prone to systematic error. Lastly, we connected the velocity distribution to the molecular adhesion force distribution and showed that the slip-bond regime of the catch-slip behavior of the P-selectin/PSGL-1 interaction is responsible for the variation of cell velocity.
Asunto(s)
Selectina L , Selectina-P , Adhesión Celular , Rodamiento de Leucocito , Neutrófilos , Estrés MecánicoRESUMEN
The mechanical properties of DNA have enabled it to be a structural and sensory element in many nanotechnology applications. While specific base-pairing interactions and secondary structure formation have been the most widely utilized mechanism in designing DNA nanodevices and biosensors, the intrinsic mechanical rigidity and flexibility are often overlooked. In this article, we will discuss the biochemical and biophysical origin of double-stranded DNA rigidity and how environmental and intrinsic factors such as salt, temperature, sequence, and small molecules influence it. We will then take a critical look at three areas of applications of DNA bending rigidity. First, we will discuss how DNA's bending rigidity has been utilized to create molecular springs that regulate the activities of biomolecules and cellular processes. Second, we will discuss how the nanomechanical response induced by DNA rigidity has been used to create conformational changes as sensors for molecular force, pH, metal ions, small molecules, and protein interactions. Lastly, we will discuss how DNA's rigidity enabled its application in creating DNA-based nanostructures from DNA origami to nanomachines.
Asunto(s)
ADN , Nanoestructuras , Nanotecnología , Simulación de Dinámica Molecular , Conformación de Ácido NucleicoRESUMEN
Molecular force sensors (MFSs) have grown to become an important tool to study the mechanobiology of cells and tissues. They provide a minimally invasive means to optically report mechanical interactions at the molecular level. One of the challenges in molecular force sensor studies is the interpretation of the fluorescence readout. In this review, we divide existing MFSs into three classes based on the force-sensing mechanism (reversibility) and the signal output (analog/digital). From single-molecule force spectroscopy (SMFS) perspectives, we provided a critical discussion on how the sensors respond to force and how the different sensor designs affect the interpretation of their fluorescence readout. Lastly, the review focuses on the limitations and attention one must pay in designing MFSs and biological experiments using them; in terms of their tunability, signal-to-noise ratio (SNR), and perturbation of the biological system under investigation.
Asunto(s)
Mecanotransducción Celular , Imagen Individual de Molécula/métodos , Estrés MecánicoRESUMEN
Exosomes are small (â¼30-140 nm) lipid bilayer-enclosed particles of endosomal origin. They are a subset of extracellular vesicles (EVs) that are secreted by most cell types. There has been growing interest in exosome research in the last decade due to their emerging role as intercellular messengers and their potential in disease diagnosis. Indeed, exosomes contain proteins, lipids, and RNAs that are specific to their cell origin and could deliver cargo to both nearby and distant cells. As a result, investigation of exosome cargo contents could offer opportunities for disease detection and treatment. Moreover, exosomes have been explored as natural drug delivery vehicles since they can travel safely in extracellular fluids and deliver cargo to destined cells with high specificity and efficiency. Despite significant efforts made in this relatively new field of research, progress has been held back by challenges such as inefficient separation methods, difficulties in characterization, and lack of specific biomarkers. In this review, we summarize the current knowledge in exosome biogenesis, their roles in disease progression, and therapeutic applications and opportunities in bioengineering. Furthermore, we highlight the established and emerging technological developments in exosome isolation and characterization. We aim to consider critical challenges in exosome research and provide directions for future studies.
RESUMEN
To understand the mechanical forces involved in cell adhesion, molecular force sensors have been developed to study tension through adhesion proteins. Recently, a class of molecular force sensors called tension gauge tethers (TGTs) have been developed that rely on irreversible force-dependent dissociation of a DNA duplex to study cell adhesion forces. Although the TGT offers a high signal-to-noise ratio and is ideal for studying fast/single-molecular adhesion processes, quantitative interpretation of experimental results has been challenging. Here, we use a computational approach to investigate how TGT fluorescence readout can be quantitatively interpreted. In particular, we studied force sensors made of a single TGT, multiplexed single TGTs, and two TGTs connected in series. Our results showed that fluorescence readout using a single TGT can result from drastically different combinations of force history and adhesion event density that span orders of magnitude. In addition, the apparent behavior of the TGT is influenced by the tethered receptor-ligand, making it necessary to calibrate the TGT with every new receptor-ligand. To solve this problem, we proposed a system of two serially connected TGTs. Our result shows that not only is the ratiometric readout of serial TGT independent of the choice of receptor-ligand, it is able to reconstruct force history with sub-pN force resolution. This is also not possible by simply multiplexing different types of TGTs together. Last, we systematically investigated how the sequence composition of the two serially connected TGTs can be tuned to achieve different dynamic range. This computational study demonstrated how serially connected irreversible molecular dissociation processes can accurately quantify molecular force and laid the foundation for subsequent experimental studies.
Asunto(s)
Técnicas Biosensibles/métodos , Moléculas de Adhesión Celular/química , Estrés Mecánico , ADN/química , Fluorescencia , Imagen Individual de Molécula/métodos , Análisis Espectral/métodosRESUMEN
Melatonin and serotonin are important phytochemicals enabling plants to redirect growth in response to environmental stresses. Despite much research on their biosynthetic routes, localization of their biosynthetic enzymes and recent identification of a phytomelatonin receptor, localization of the molecules themselves has to date not been possible. Elucidation of their locations in living tissues can provide an effective tool to facilitate indolamine research across systems including both plants and animals. In this study, we employed a novel technique, quantum dot nanoparticles, to directly visualize melatonin and serotonin in axenic roots. Melatonin was absorbed through epidermal cells, travelled laterally, and accumulated in endodermal and rapidly dividing pericycle cells. Serotonin was absorbed by cells proximal to the crown with rapid polar movement toward the root tip. Thermal stress disrupted localization and dispersed melatonin and serotonin across cells. These data demonstrate the natural movement of melatonin and serotonin in roots directing cell growth and suggest that plants have a mechanism to disperse the indolamines throughout tissues as antioxidants in response to environmental stresses.
Asunto(s)
Hypericum/metabolismo , Melatonina/metabolismo , Serotonina/metabolismo , Regulación de la Expresión Génica de las Plantas , Puntos Cuánticos , Estrés FisiológicoRESUMEN
Nuclear speckles are self-assembled organelles composed of RNAs and proteins. They are proposed to act as structural domains that control distinct steps in gene expression, including transcription, splicing and mRNA export. Earlier studies identified differential localization of a few components within the speckles. It was speculated that the spatial organization of speckle components might contribute directly to the order of operations that coordinate distinct processes. Here, by performing multi-color structured illumination microscopy, we characterized the multilayer organization of speckles at a higher resolution. We found that SON and SC35 (also known as SRSF2) localize to the central region of the speckle, whereas MALAT1 and small nuclear (sn)RNAs are enriched at the speckle periphery. Coarse-grained simulations indicate that the non-random organization arises due to the interplay between favorable sequence-encoded intermolecular interactions of speckle-resident proteins and RNAs. Finally, we observe positive correlation between the total amount of RNA present within a speckle and the speckle size. These results imply that speckle size may be regulated to accommodate RNA accumulation and processing. Accumulation of RNA from various actively transcribed speckle-associated genes could contribute to the observed speckle size variations within a single cell.