Enhanced diesel emissions at low ambient temperature: hazardous materials in fine particles.

The emission of fine particles (PM2.5) from diesel trucks is enhanced by low ambient temperatures, which is a fact that has attracted considerable attention. Carbonaceous matter and polycyclic aromatic hydrocarbons (PAHs) are the dominant hazardous materials in PM2.5. These materials induce severe adverse effects on air quality and human health and contribute to climate change. The emissions from heavy- and light-duty diesel trucks were tested at an ambient temperature of - 20 to - 13 â„ƒ and 18-24 â„ƒ. This is the first study to quantify the enhanced carbonaceous matter and PAH emissions from diesel trucks at very low ambient temperatures based on an on-road emission test system. Features affecting diesel emissions, including driving speed, vehicle type, and engine certification level, were considered. The emissions of organic carbon, elemental carbon, and PAHs significantly increased from - 20 to - 13 â„ƒ. The empirical results revealed that intensive abatement of diesel emissions at low ambient temperatures could benefit human health and have a positive influence on climate change. Considering the widespread applications worldwide, an investigation into diesel emissions of carbonaceous matter and PAHs in fine particles at low ambient temperatures is urgently required.

Prediction of break-out sound from a rectangular cavity via an elastically mounted panel.

The break-out sound from a cavity via an elastically mounted panel is predicted in this paper. The vibroacoustic system model is derived based on the so-called spectro-geometric method in which the solution over each sub-domain is invariably expressed as a modified Fourier series expansion. Unlike the traditional modal superposition methods, the continuity of the normal velocities is faithfully enforced on the interfaces between the flexible panel and the (interior and exterior) acoustic media. A fully coupled vibro-acoustic system is obtained by taking into account the strong coupling between the vibration of the elastic panel and the sound fields on the both sides. The typical time-consuming calculations of quadruple integrals encountered in determining the sound power radiation from a panel has been effectively avoided by reducing them, via discrete cosine transform, into a number of single integrals which are subsequently calculated analytically in a closed form. Several numerical examples are presented to validate the system model, understand the effects on the sound transmissions of panel mounting conditions, and demonstrate the dependence on the size of source room of the "measured" transmission loss.

Vibro-acoustic analysis of a rectangular cavity bounded by a flexible panel with elastically restrained edges.

A coupled system consisting of an acoustic cavity and an elastic panel is a classical problem in structural acoustics and is typically analyzed using modal approaches based on in vacuo structural modes and the rigidly walled acoustic modes which are pre-determined based on separate component models. Such modeling techniques, however, tend to suffer the following drawbacks or limitations: (a) a panel is only subjected to ideal boundary conditions such as the simply supported, (b) the coupling between the cavity and panel is considered weak, and (c) the particle velocity cannot be correctly predicted from the pressure gradient on the contacting interface, to name a few. Motivated by removing these restrictions, this paper presents a general method for the vibro-acoustic analysis of a three-dimensional (3D) acoustic cavity bounded by a flexible panel with general elastically restrained boundary conditions. The displacement of the plate and the sound pressure in the cavity are constructed in the forms of standard two-dimensional and 3D Fourier cosine series supplemented by several terms introduced to ensure and accelerate the convergence of the series expansions. The unknown expansions coefficients are treated as the generalized coordinates and determined using the Rayleigh-Ritz procedure based on the energy expressions for the coupled structural acoustic system. The accuracy and effectiveness of the proposed method are demonstrated through numerical examples and comparisons with the results available in the literature.

Acoustic analysis of a rectangular cavity with general impedance boundary conditions.

A Fourier series method is proposed for the acoustic analysis of a rectangular cavity with impedance boundary conditions arbitrarily specified on any of the walls. The sound pressure is expressed as the combination of a three-dimensional Fourier cosine series and six supplementary two-dimensional expansions introduced to ensure (accelerate) the uniform and absolute convergence (rate) of the series representation in the cavity including the boundary surfaces. The expansion coefficients are determined using the Rayleigh-Ritz method. Since the pressure field is constructed adequately smooth throughout the entire solution domain, the Rayleigh-Ritz solution is mathematically equivalent to what is obtained from a strong formulation based on directly solving the governing equations and the boundary conditions. To unify the treatments of arbitrary nonuniform impedance boundary conditions, the impedance distribution function on each specified surface is invariantly expressed as a double Fourier series expansion so that all the relevant integrals can be calculated analytically. The modal parameters for the acoustic cavity can be simultaneously obtained from solving a standard matrix eigenvalue problem instead of iteratively solving a nonlinear transcendental equation as in the existing methods. Several numerical examples are presented to demonstrate the effectiveness and reliability of the current method for various impedance boundary conditions, including nonuniform impedance distributions.

Double antioxidant activities of rosiglitazone against high glucose-induced oxidative stress in hepatocyte.

Chronic hyperglycemia is the hallmark of diabetes and its complication. High glucose-induced excessive reactive oxygen species (ROS) production has been considered to play an important role in the development of diabetes. However, the influence of high glucose on the liver remains to be clarified. Rosiglitazone (RSG) is a member of thiazolidinediones (TDZs) family, which is the ligand of the of nuclear transcription factor peroxisome proliferator-activated receptor-γ (PPARγ), being used clinically for the treatment of type 2 diabetic patients through their insulin-sensitizing effect. In the present study, we investigated the cytotoxicity of high glucose in QZG hepatocytes and evaluated the protective effect of RSG. The results showed that high glucose significantly reduced cell viability through generation of ROS via activation of PKC, which was inhibited by RSG. On the one hand, RSG notably inhibited the activation of PKC induced by high glucose independent of PPARγ, leading to the decrease of ROS generation. On the other hand, RSG notably increased the expression of key antioxidant transcription factor Nrf2 and antioxidant enzyme HO-1 in a PPARγ-dependent manner, leading to the elimination of excessive ROS. In addition, RSG also inhibited the decrease of COX-2 expression induced by high glucose through activating PPARγ. Furthermore, the activation of Akt and MAPKs was involved in the effect of RSG on Nrf2, HO-1 and COX-2. In summary, our study supports the hypothesis that RSG protect hepatocytes from high glucose-induced toxicity through PPARγ-dependent and PPARγ-independent pathways.

Methods for storage of antimicrobial effectiveness test inoculum suspensions below freezing.

Studies were conducted to determine the suitability of storage below freezing of some antimicrobial effectiveness test inoculum organisms: Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans. Several solutions used for protecting microorganisms subjected to storage below freezing were compared. Comparison of 10% dextrose with other solutions (distilled water; 0.07 M phosphate buffer, H 7.0, with 15% glycerol; and 0.07 M phosphate buffer, pH 7.0, with 7.5% dimethyl sufoxide) demonstrated that inoculum suspensions were most stable when prepared with 10% dextrose. After storage for 6 months at-50 degrees in a freezer, inoculum suspensions prepared with 10% dextrose retained viability and demonstrated suitability for use in antimicrobial effectiveness tests of dosage forms containg preservatives.

Quantitative methods for the gas chromatographic characterization of acidic fermentation by-products of anaerobic bacteria.

The present report describes improved chromatographic procedures which are capable of separating and quantitating complex mixtures of acidic fermentation by-products produced by anaerobic bacteria grown in two glucose-containing media. These methods are reliable and are sensitive, being able to detect as low as 0.5 mumoles of each by-product. Sample preparation has been simplified, and the methylation conditions have been optimized. It is also indicated in this investigation that each culture produced different patterns of by-products in each medium, indicating that the types and quantities of by-products produced in one medium cannot be used as a basis for characterization of these same cultures when grown in a different medium. Finally, it is shown that cultures can be characterized by the distinctive molar proportions of by-products they produce within each medium.