RESUMEN
Activation of endogenous neural stem cells (NSC) is one of the most potential measures for neural repair after spinal cord injury. However, methods for regulating neural stem cell behavior are still limited. Here, we investigated the effects of nicotinamide riboside promoting the proliferation of endogenous neural stem cells to repair spinal cord injury. Nicotinamide riboside promotes the proliferation of endogenous neural stem cells and regulates their differentiation into neurons. In addition, nicotinamide riboside significantly restored lower limb motor dysfunction caused by spinal cord injury. Nicotinamide riboside plays its role in promoting the proliferation of neural stem cells by activating the Wnt signaling pathway through the LGR5 gene. Knockdown of the LGR5 gene by lentivirus eliminates the effect of nicotinamide riboside on the proliferation of endogenous neural stem cells. In addition, administration of Wnt pathway inhibitors also eliminated the proliferative effect of nicotinamide riboside. Collectively, these findings demonstrate that nicotinamide promotes the proliferation of neural stem cells by targeting the LGR5 gene to activate the Wnt pathway, which provides a new way to repair spinal cord injury.
RESUMEN
The accurate fenestration, screw implantation and assisting stabilizing-plate placement in surgery of benign tumors in the proximal femur needs be defined easily. The aim of this study was to investigate the value of 3D printed multifunctional guides plate (3D-MGP) based on computer aided design. Between January 2020 and June 2022, 17 patients (nine females and eight males) with benign proximal femoral tumor had lesion curettage and allograft combined with internal plate fixation using 3D-MGP. In this study, the patients had CT scans and a technician reconstructed the 3D images of tumor and the femur, a doctor designed the location and margin of the fenestration and screws, and integrated different functions into MGP for benign proximal femoral lesions, which assisted in precise localization, fenestration and screw drilling. Musculoskeletal Tumor Society (MSTS) scoring was used to evaluate lower extremity function. Bone healing and the screws location was assessed with the radiographs. All patients underwent successful surgery with complete resection of the tumor and internal fixation with using the 3D-MGP. The mean follow-up was 16.4 months. The operative time was 126.47 ± 18.44 min, intraoperative bleeding was 198.23 ± 67.94 mL, intraoperative fluoroscopy was 6.47 ± 0.62, postoperative drainage was 223.82 ± 119.51 mL, and MSTS score was 27.29 ± 1.31 points. There were no unplanned fenestration and improper screw fixation. The 3D-MGP enabled personalized and accurate location of tumor, fenestration, screw placement and assisted stabilizing-plate placement for the treatment of benign tumor of the proximal femur. This technique has the potential to shorten operative times, decrease intraoperative bleeding, and reduce radiation exposure to patients.
Asunto(s)
Placas Óseas , Tornillos Óseos , Neoplasias Femorales , Impresión Tridimensional , Humanos , Femenino , Masculino , Adulto , Persona de Mediana Edad , Neoplasias Femorales/cirugía , Neoplasias Femorales/diagnóstico por imagen , Adulto Joven , Diseño Asistido por Computadora , AdolescenteRESUMEN
Spinal cord injury (SCI) is a devastating condition for which effective clinical treatment is currently lacking. During the acute phase of SCI, myriad pathological changes give rise to subsequent secondary injury. The results of our previous studies indicated that treating rats post-SCI with nafamostat mesilate (NM) protected the blood-spinal cord barrier (BSCB) and exerted an antiapoptotic effect. However, the optimal dosage for mice with SCI and the underlying mechanisms potentially contributing to recovery, especially during the acute phase of SCI, have not been determined. In this study, we first determined the optimal dosage of NM for mice post-SCI (5 mg/kg/day). Subsequently, our RNA-seq findings revealed that NM has the potential to inhibit pyroptosis after SCI. These findings were further substantiated by subsequent Western blot (WB) and Immunofluorescence (IF) analyses in vivo. These results indicate that NM can alleviate NLRP3 (NOD-like receptor thermal protein domain associated protein 3)-mediated pyroptosis by modulating the NF-κB signaling pathway and reducing the protein expression levels of NIMA-related kinase 7 (NEK7) and cathepsin B (CTSB). In vitro experimental results supported our in vivo findings, revealing the effectiveness of NM in suppressing pyroptosis induced by adenosine triphosphate (ATP) and lipopolysaccharide (LPS) in BV2 cells. These results underscore the potential of NM to regulate NLRP3-mediated pyroptosis following SCI. Notably, compared with other synthetic compounds, NM exhibits greater versatility, suggesting that it is a promising clinical treatment option for SCI.
Asunto(s)
Benzamidinas , Guanidinas , Ratones Endogámicos C57BL , Proteína con Dominio Pirina 3 de la Familia NLR , Piroptosis , Traumatismos de la Médula Espinal , Animales , Proteína con Dominio Pirina 3 de la Familia NLR/metabolismo , Piroptosis/efectos de los fármacos , Traumatismos de la Médula Espinal/tratamiento farmacológico , Traumatismos de la Médula Espinal/metabolismo , Ratones , Guanidinas/farmacología , Guanidinas/uso terapéutico , FN-kappa B/metabolismo , Masculino , Transducción de Señal/efectos de los fármacos , Modelos Animales de Enfermedad , Catepsina B/metabolismoRESUMEN
OBJECTIVE: Percutaneous CT-guided radiofrequency ablation (CT-RFA) is a widely accepted procedure for treatment of osteoid osteomas. However, the application of CT-RFA was restricted as a result of some drawbacks, such as radiation exposure, and inconvenience in general anesthesia. The primary aim of this study is to evaluate the safety and efficacy of intra-operative TiRobot-assisted percutaneous RFA of osteoid osteomas. METHODS: We retrospectively reviewed 21 medical files of patients who were treated with percutaneous RFA of osteoid osteomas guided by the TiRobot system in our institution between March 2021 and April 2022. The three-dimensional images obtained by a 3D C-arm intra-operatively were sent to the TiRobot system. The puncture point and trajectory were designed. Then the guide pin was positioned to the lesion with the assistance of TiRobot and the biopsy sheath was inserted into the lesion through the guide pin. The tumor was biopsied for pathological examination. Then the RFA needle was inserted into the nidus through the biopsy sheath for thermal ablation. Data were extracted on the associated complications, the reduction in pain at 1 month and 1 year postoperatively assessed by the visual analogue scale (VAS). A paired t-test was used to compare the pre-operative and post-operative VAS scores. RESULTS: The patients included 17 males and four females with a mean age of 19.5 ± 10.4 years (range 3-45 years). Lesions were located on the femur in nine cases, on the tibia in nine cases, on the humerus in one case, on the calcaneus in one case, and on the acetabulum in one case. TiRobot-assisted percutaneous RFA was successfully performed on all 21 patients. There was no intra-operative or post-operative complications observed. Pathological diagnosis of osteoid osteoma was obtained in 11 patients, but the other 10 cases were not pathologically diagnosed. The mean follow-up time was 18.8 months (range: 12-26 months).Post-operative VAS scores were reduced significantly in all cases. The mean VAS score decreased from 6.5 pre-operatively to 0.5 at 1 month post-operatively and to 0.1 at 1 year post-operatively. CONCLUSION: As a reliable technique for localizing and resection of nidus, TiRobot-assisted percutaneous RFA is a safe and effective option for the treatment of osteoid osteomas.
Asunto(s)
Neoplasias Óseas , Osteoma Osteoide , Ablación por Radiofrecuencia , Procedimientos Quirúrgicos Robotizados , Humanos , Osteoma Osteoide/cirugía , Osteoma Osteoide/diagnóstico por imagen , Masculino , Estudios Retrospectivos , Ablación por Radiofrecuencia/métodos , Femenino , Adolescente , Neoplasias Óseas/cirugía , Procedimientos Quirúrgicos Robotizados/métodos , Niño , Adulto Joven , Adulto , Tomografía Computarizada por Rayos X , Dimensión del Dolor , Persona de Mediana Edad , Cirugía Asistida por Computador/métodosRESUMEN
Recently, membrane separation technology has been widely utilized in filtration process intensification due to its efficient performance and unique advantages, but membrane fouling limits its development and application. Therefore, the research on membrane fouling prediction and control technology is crucial to effectively reduce membrane fouling and improve separation performance. This review first introduces the main factors (operating condition, material characteristics, and membrane structure properties) and the corresponding principles that affect membrane fouling. In addition, mathematical models (Hermia model and Tandem resistance model), artificial intelligence (AI) models (Artificial neural networks model and fuzzy control model), and AI optimization methods (genetic algorithm and particle swarm algorithm), which are widely used for the prediction of membrane fouling, are summarized and analyzed for comparison. The AI models are usually significantly better than the mathematical models in terms of prediction accuracy and applicability of membrane fouling and can monitor membrane fouling in real-time by working in concert with image processing technology, which is crucial for membrane fouling prediction and mechanism studies. Meanwhile, AI models for membrane fouling prediction in the separation process have shown good potential and are expected to be further applied in large-scale industrial applications for separation and filtration process intensification. This review will help researchers understand the challenges and future research directions in membrane fouling prediction, which is expected to provide an effective method to reduce or even solve the bottleneck problem of membrane fouling, and to promote the further application of AI modeling in environmental and food fields.
Asunto(s)
Inteligencia Artificial , Membranas Artificiales , Filtración/métodos , Redes Neurales de la Computación , Modelos TeóricosRESUMEN
Metal-organic frameworks (MOFs) are porous crystalline materials assembled from organic ligands and metallic secondary building blocks. Their special structural composition gives them the advantages of high porosity, high specific surface area, adjustable pore size, and good stability. MOF membranes and MOF-based mixed-matrix membranes prepared from MOF crystals have ultra-high porosity, uniform pore size, excellent adsorption properties, high selectivity, and high throughput, which contribute to their being widely used in separation fields. This review summarizes the synthesis methods of MOF membranes, including in situ growth, secondary growth, and electrochemical methods. Mixed-matrix membranes composed of Zeolite Imidazolate Frameworks (ZIF), University of Oslo (UIO), and Materials of Institute Lavoisier (MIL) frameworks are introduced. In addition, the main applications of MOF membranes in lithium-sulfur battery separators, wastewater purification, seawater desalination, and gas separation are reviewed. Finally, we review the development prospects of MOF membranes for the large-scale application of MOF membranes in factories.
RESUMEN
The problem that it is difficult to balance vehicle stability and economy at the same time under the starting steering condition of a four-wheel independent drive electric vehicle (4WIDEV) is addressed. In this paper, we propose a coordinated optimal control method of AFS and DYC for a four-wheel independent drive electric vehicle based on the MAS model. Firstly, the angular velocity of the transverse pendulum at the center of mass and the lateral deflection angle of the center of mass are decoupled by vector transformation, and the two-degree-of-freedom eight-input model of the vehicle is transformed into four two-degree-of-freedom two-input models, and the reduced-dimensional system is regarded as four agents. Based on the hardware connection structure and communication topology of the four-wheel independent drive electric vehicle, the reduced-dimensional model of 4WIDEV AFS and DYC coordinated optimal control is established based on graph theory. Secondly, the deviation of the vehicle transverse swing angular velocity and mass lateral deflection angle from their ideal values is oriented by combining sliding mode variable structure control (SMC) with distributed model predictive control (DMPC). A discrete dynamic sliding mode surface function is proposed for the ith agent to improve the robustness of the system in response to parameter variations and disturbances. Considering the stability and economy of the ith agent, an active front wheel steering and drive torque optimization control method based on SMC and DMPC is proposed for engineering applications. Finally, a hardware-in-the-loop (HIL) test bench is built for experimental verification, and the results show that the steering angle is in the range of 0-5°, and the proposed method effectively weighs the system dynamic performance, computational efficiency, and the economy of the whole vehicle. Compared with the conventional centralized control method, the torque-solving speed is improved by 32.33 times, and the electrical consumption of the wheel motor is reduced by 16.6%.
RESUMEN
Spinal cord injury (SCI) causes motor, sensory and automatic impairment due to rarely axon regeneration. Developing effective treatment for SCI in the clinic is extremely challenging because of the restrictive axonal regenerative ability and disconnection of neural elements after injury, as well as the limited systemic drug delivery efficiency caused by blood spinal cord barrier. To develop an effective non-invasive treatment strategy for SCI in clinic, we generated an autologous plasma exosome (AP-EXO) based biological scaffold where AP-EXO was loaded with neuron targeting peptide (RVG) and growth-facilitating peptides (ILP and ISP). This scaffold can be targeted delivered to neurons in the injured area and elicit robust axon regrowth across the lesion core to the levels over 30-fold greater than naïve treatment, thus reestablish the intraspinal circuits and promote motor functional recovery after spinal cord injury in mice. More importantly, in ex vivo, human plasma exosomes (HP-EXO) loaded with combinatory peptides of RVG, ILP and ISP showed safety and no liver and kidney toxicity in the application to nude SCI mice. Combining the efficacy and safety, the AP-EXO-based personalized treatment confers functional recovery after SCI and showed immense promising in biomedical applications in treating SCI. It is helpful to expand the application of combinatory peptides and human plasma derived autologous exosomes in promoting regeneration and recovery upon SCI treatment.
RESUMEN
Large-scale use of fossil fuels has brought about increasingly serious problems of environmental pollution, development and utilization of renewable energy is one of the effective solutions. Duckweed has the advantages of fast growth, high starch content and no occupation of arable land, so it is a promising starchy energy plant. A new submerged duckweed mutant (sub-1) with abundant starch accumulation was obtained, whose content of amylopectin accounts for 84.04% of the starch granules. Compared with the wild type (Lemna aequinoctialis), the branching degree of starch in sub-1 mutant was significantly increased by 19.6%. Chain length DP 6-12, DP 25-36 and DP > 36 of amylopectin significantly decreased, while chain length DP 13-24 significantly increased. Average chain length of wild-type and sub-1 mutant starches were greater than DP 22. Moreover, the crystal structure and physical properties of starch have changed markedly in sub-1 mutant. For example, the starch crystallinity of sub-1 mutant was only 8.94%, while that of wild-type was 22.3%. Compared with wild type, water solubility of starch was significantly reduced by 29.42%, whereas swelling power significantly increased by 97.07% in sub-1 mutant. In order to further analyze the molecular mechanism of efficient accumulation of amylopectin in sub-1 mutant, metabolome and transcriptome were performed. The results showed that glucose accumulated in sub-1 mutant, then degradation of starch to glucose mainly depends on α-amylase. At night, the down-regulated ß-amylase gene resulted in the inhibition of starch degradation. The starch and sucrose metabolism pathways were significantly enriched. Up-regulated expression of SUS, AGPase2, AGPase3, PYG, GPI and GYS provide sufficient substrate for starch synthesis in sub-1 mutant. From the 0H to 16H light treatment, granule-bound starch synthase (GBSS1) gene was inhibited, on the contrary, the starch branching enzyme (SBE) gene was induced. Differential expression of GBSS1 and SBE may be an important reason for the decrease ratio of amylose/amylopectin in sub-1 mutant. Taken together, our results indicated that the sub-1 mutant can accumulate the amylopectin efficiently, potentially through altering the differential expression of AGPase, GBSS1, SBE, and BAM. This study also provides theoretical guidance for creating crop germplasm with high amylopectin by means of synthetic biology in the future.
Asunto(s)
Enzima Ramificadora de 1,4-alfa-Glucano , Araceae , Almidón Sintasa , Amilopectina/química , Almidón/metabolismo , Amilosa/química , Enzima Ramificadora de 1,4-alfa-Glucano/metabolismo , Araceae/metabolismoRESUMEN
BACKGROUND: Carrots are widely used in home cooking and vegetable processing industries because of their high nutritional value. However, different processing methods may produce a negative impact on carrot texture and nutrition quality. Therefore, the development of better processing methods to preserve the texture and nutrition quality of carrots will be beneficial to the carrot industry. RESULTS: The effects of heat and pulsed electric field (PEF) treatments with different heat temperatures (T) and holding time (th ) on comprehensive changes in thermal efficiency profiles, and physicochemical (color, hardness, cell structural damage) and nutritional (releasable ß-carotene contents) properties of carrots were studied. In addition, electrical conductivity (σ) and soluble matter contents (°Brix) were determined for the heat-treated extracts. The value of total color difference (∆E) and cell structural damage index (Z) of carrots, σ and °Brix of extracts all increased with increasing T and th under different heat experimental conditions, whereas the value of cutting force (F) presented an opposite tendency and content of releasable ß-carotene decreased after th > 2 min at T = 100 °C. CONCLUSION: The results show that PEF heating is beneficial in preventing changes in physicochemical and nutritional properties of carrots compared to traditional heat treatment. PEF has potential as a heating technology in the food industry. © 2022 Society of Chemical Industry.
Asunto(s)
Daucus carota , Calor , Daucus carota/química , beta Caroteno/análisis , Culinaria , Fenómenos Mecánicos , Manipulación de Alimentos/métodosRESUMEN
Apple pomace, a solid waste produced during industrial processing of apple juice or cider, is a rich source of high value-added compounds such as polyphenols. This review summarizes present studies on the qualitative and quantitative methods, including Folin-Ciocalteu colorimetric, high pressure liquid chromatography (HPLC) and fluorescence spectrum, as well as enhanced extraction methods of polyphenols in apple pomace by different traditional and novel technologies, including ultrasounds (US), microwave (MW), pulsed electric fields (PEF), high voltage electrical discharges (HVED) and enzyme. The principles and characteristics of different effective enhanced extraction technologies of polyphenols in apple pomace were compared. In addition, the different cell disruption analysis methods, such as destructive detection method (electrical conductivity disintegration index, Zc), image analysis method (including scanning electron microscopy, SEM, and confocal laser scanning microscopy, CLSM), and nondestructive method (such as magnetic resonance imaging, MRI) are presented in this review. The study proved that there was a correlation between destructive detection method and image analysis method. However, each of the technologies reviewed in this study has some disadvantages to overcome, and some mechanisms need to be further substantiated. Therefore, more competitive techniques for polyphenols extraction and analysis of cell disintegration are needed to emerge in the future.
Asunto(s)
Malus , Polifenoles , Polifenoles/química , Malus/química , Antioxidantes/análisis , Bebidas Alcohólicas/análisisRESUMEN
The applications of fiber-optic acoustic sensors are expanded to the high-temperature field, but it still faces challenges to realize the wide-band and high-sensitivity acoustic signal detection in high-temperature environments. Here, we propose a miniature membrane-free fiber-optic acoustic sensor based on a rigid Fabry-Pérot (F-P) cavity and construct an acoustic signal detection system. The system can achieve high-sensitivity acoustic detection while maintaining a wide frequency band in temperatures ranging from 20 °C to 200 °C. The prepared F-P cavity based on optical contact technology is the sensitive unit of the sensor, and has a high-quality factor of 8.8×105. Specifically, with the increasing of temperature, the sensitivity gradually increases, and the frequency response range does not change. A maximum sensitivity of 491.2 mV/Pa and a high signal-to-noise ratio of 60.9 dB are achieved at 200 °C. The sensor has an excellent acoustic signal response in the frequency range of 10 Hz-50 kHz with a flatness of ±2 dB. This study is important for the application of the fiber-optic acoustic sensor in high-temperature environments.
RESUMEN
Subsequently to the publication of the above paper, an interested reader drew to the authors' attention that a pair of the data panels in Fig. 4A (on p. 7862), showing the 'Sham' and 'TBI' experiments, were overlapping, such that the data were apparently derived from the same original source. After having examined their original data, the authors have realized that they uploaded the incorrect image for the 'Sham' experiment in this figure. The revised version of Fig. 4 showing the correct data for all the experiments portrayed in Fig. 4A, is shown opposite. Note that the replacement of the erroneous data does not affect either the results or the conclusions reported in this paper, and all the authors agree to the publication of this corrigendum. The authors are grateful to the Editor of Molecular Medicine Reports for granting them this opportunity to publish a Corrigendum, and apologize to the readership for any inconvenience caused.[Molecular Medicine Reports 17: 7859-7865, 2018; DOI: 10.3892/mmr.2018.8801].
RESUMEN
A compact fiber-optic Fabry-Perot (F-P) cavity for a sensor is designed based on a sandwich structure, adopting direct bonding of quartz glass. The reflective F-P cavity is manufactured by a fiber optic with a quartz glass ferrule and the sandwich structure with an air cavity, which is achieved by direct bonding of quartz glass. This fabrication process includes plasma surface activation, hydrophilic pre-bonding, high-temperature annealing, and dicing. The cross section of the bonding interface tested by a scanning electron microscope indicates that the sandwich structure is well bonded, and the air cavity is not deformed. Experiments show that the quality factor of the F-P cavity is 2711. Tensile strength testing shows that the bond strength exceeds 35 MPa. The advantage of direct bonding of quartz glass is that high consistency and mass production of the cavity can be realized. Moreover, the cavity is free of problems caused by the mismatch of thermal expansion coefficients between different materials. Therefore, the F-P cavity can be made into a sensor, which is promising in detecting air pressure, acoustic and high temperature.
RESUMEN
Cartilage adheres to subchondral bone via a specific osteochondral interface tissue where forces are transferred from soft cartilage to hard bone without conferring fatigue damage over a lifetime of load cycles. However, the fine structure and mechanical properties of the osteochondral interface tissue remain unclear. Here, we identified an ultrathin â¼20-30 µm graded calcified region with two-layered micronano structures of osteochondral interface tissue in the human knee joint, which exhibited characteristic biomolecular compositions and complex nanocrystals assembly. Results from finite element simulations revealed that within this region, an exponential increase of modulus (3 orders of magnitude) was conducive to force transmission. Nanoscale heterogeneity in the hydroxyapatite, coupled with enrichment of elastic-responsive protein-titin, which is usually present in muscle, endowed the osteochondral tissue with excellent mechanical properties. Collectively, these results provide novel insights into the potential design for high-performance interface materials for osteochondral interface regeneration.
Asunto(s)
Cartílago Articular , Nanoestructuras , Huesos , Humanos , Articulación de la Rodilla , Ingeniería de Tejidos/métodos , Andamios del Tejido/químicaRESUMEN
We report a COVID-19 case with carbapenem resistant Chryseobacterium indologenes bacteremia. Whole genome sequencing identified the presence of bla IND-2, bla CIA and bla CcrA. To our knowledge, this is the first report of Chryseobacterium indologenes complicating COVID-19 and the detection of bla CcrA in C. indologenes. The presence of bla CcrA in Chryseobacterium was overlooked previously may related to substantial sequence divergence with the original allele in Bacteroides fragilis. Antimicrobial resistance (AMR) is a challenge to global health in the age of COVID-19 pandemic. Further study and surveillance of underlying mechanisms is needed.
RESUMEN
This study aimed to explore the pathological mechanism in regulating glioma progression. The expression of miR-92 and neogenin was evaluated by qRT-PCR and western blot. Cell viability and apoptosis were measured by MTT and flow cytometry assays, respectively. The migration and invasion abilities were examined by transwell assays. The interaction between miR-92 and neogenin was conducted by dual-luciferase reporter system. As a result, we found that the expression of miR-92 was up-regulated in glioma tissues and cell lines. Down-regulation of miR-92 inhibited glioma cell proliferation, migration, invasion and promoted cell apoptosis rate of U251 and U87 cells. Notably, miR-92 was identified to directly target to 3'-UTR of neogenin. Furthermore, neogenin was down-regulated in glioma tissues and cells in a miR-92-correlated manner. Overexpression of neigenin could cause similar results to miR-92 knockdown in U251 and U87 cells. However, the silencing of neogenin partially reversed the effects of miR-92 knockdown on cell proliferation, migration, invasion and apoptosis of glioma cells in vitro. In conclusion, we clarified that miR-92 knockdown could suppress the malignant progression of glioma cells in vitro by targeting neogenin. Therefore, miR-92 could serve as a potential diagnostic and prognostic marker in glioma patients.
RESUMEN
OBJECTIVE: To perform a comprehensive meta-analysis to systematically assess the value of abnormal muscle response (AMR) in predicting the surgical outcome of patients with hemifacial spasm. METHODS: The electronic database PubMed, Embase, Web of Science, and ScienceDirect were searched, and relevant articles were identified up to September 30, 2019. These data were extracted for pooled analysis, heterogeneity testing, sensitivity analysis, publication bias analysis, and Fagan plot analysis. RESULTS: The disappearance of AMR during microvascular decompression was associated with a favorable short-term surgical outcome (pooled relative risk [RR], 1.42; 95% confidence interval [CI], 1.24-1.62; pooled RR adjusted for publication bias, 1.30; 95% CI, 1.08-1.57). The corresponding pooled sensitivity, specificity, positive likelihood ratio, negative likelihood ratio, and diagnostic odds ratio were 0.91 (95% CI, 0.88-0.94), 0.34 (95% CI, 0.27-0.42), 1.4 (95% CI, 1.2-1.6), 0.26 (95% CI, 0.17-0.38), and 5 (95% CI, 3-9), respectively. The disappearance of AMR was almost ineffective in predicting the long-term surgical outcome (pooled RR, 1.09; 95% CI, 1.02-1.17; pooled RR adjusted for publication bias, 1.001; 95% CI, 0.92-1.09). The corresponding pooled sensitivity, specificity, positive likelihood ratio, negative likelihood ratio, and diagnostic odds ratio were 0.90 (95% CI, 0.85-0.93), 0.28 (95% CI, 0.20-0.37), 1.2 (95% CI, 1.1-1.4), 0.38 (95% CI, 0.22-0.63), and 3 (95% CI, 2-6), respectively. CONCLUSIONS: The disappearance of AMR during microvascular decompression demonstrates limited prognostic value for a favorable short-term outcome, and does not appear effective in predicting the long-term outcome of patients with hemifacial spasm.
Asunto(s)
Músculos Faciales/fisiología , Espasmo Hemifacial/cirugía , Cirugía para Descompresión Microvascular/métodos , Espasmo Hemifacial/fisiopatología , Humanos , Monitoreo Intraoperatorio , Pronóstico , Resultado del TratamientoRESUMEN
As an important auxiliary material, adhesive materials have many important applications in various fields including but not limited to industrial packaging, marine engineering, and biomedicine. Naturally occurring adhesives such as mussel foot proteins are usually biocompatible and biodegradable, but their limited sources and poor mechanical properties in physiological conditions have limited their widespread uses in biomedical field. Inspired by the underwater adhesion phenomenon of natural organisms, a series of biomimetic adhesive materials have been developed through chemical or bioengineering approaches. Notably, some of those synthetic adhesives have exhibited great promise for medical applications in terms of their biocompatibility, biodegradability, strong tissue adhesion and many other attractive functional properties. As natural adhesive materials possess distinctive "living" attributes such as environmental responsiveness, self-regeneration and autonomous repairs, the development of various biologically inspired and biomimetic adhesive materials using natural adhesives as blueprints will thus be of keen and continuous interest in the future. The emerging field of synthetic biology will likely provide new opportunities to design living glues that recapitulate the dynamic features of those naturally occurring adhesives.