What is the Limit Size of 2D Conjugated Extension on Central Units of Small Molecular Acceptors in Organic Solar Cells?

2D conjugated extension on central units of small molecular acceptors (SMAs) has gained great successes in reaching the state-of-the-art organic photovoltaics. Whereas the limit size of 2D central planes and their dominant role in constructing 3D intermolecular packing networks are still elusive. Thus, by exploring a series of SMAs with gradually enlarged central planes, it is demonstrated that, at both single molecular and aggerated levels, there is an unexpected blue-shift for their film absorption but preferable reorganization energies, exciton lifetimes and binding energies with central planes enlarging, especially when comparing to their Y6 counterpart. More importantly, the significance of well-balanced molecular packing modes involving both central and end units is first disclosed through a systematic single crystal analysis, indicating that when the ratio of central planes area/end terminals area is no more than 3 likely provides a preferred 3D intermolecular packing network of SMAs. By exploring the limit size of 2D central planes, This work indicates that the structural profiles of ideal SMAs may require suitable central unit size together with proper heteroatom replacement instead of directly overextending 2D central planes to the maximum. These results will likely provide some guidelines for future better molecular design.

Central unit hetero-di-halogenation of acceptors enables organic solar cells with 19% efficiency.

Although peripheral hetero-di-halogenation of non-fullerene acceptors (NFAs) would allow more precise optimization of molecular properties by providing the complementary advantages of two different halogens, thus enabling further improvements of organic solar cells (OSCs), hetero-di-halogenated NFAs are seldom prepared due to the challenging construction of building blocks with two adjacent hetero-halogens. Herein, three CH-series acceptors with hetero-di-halogenated central units, named CH-FC, CH-FB and CH-CB, are constructed successfully. PM6:D18:CH-FB-based OSCs afforded an attractive PCE of 19.0% due to tighter intermolecular packing at both the single-crystal and blended-film levels, more efficient charge transfer/dissociation, and superior film morphology compared to those of PM6:D18:CH-FC (PCE 18.41%) and PM6:D18:CH-CB (PCE 18.21%). Our work highlights the effectiveness of such a CH-series molecular platform in conducting hetero-di-halogenation and achieving high-performance OSCs, and will stimulate further exploration of hetero-substitution-based acceptors.

Propeller vs Quasi-Planar 6-Cantilever Small Molecular Platforms with Extremely Two-Dimensional Conjugated Extension.

Two exotic 6-cantilever small molecular platforms, characteristic of quite different molecular configurations of propeller and quasi-plane, are established by extremely two-dimensional conjugated extension. When applied in small molecular acceptors, the only two cases of CH25 and CH26 that could contain six terminals and such broad conjugated backbones have been afforded thus far, rendering featured absorptions, small reorganization and exciton binding energies. Moreover, their distinctive but completely different molecular geometries result in sharply contrasting nanoscale film morphologies. Finally, CH26 contributes to the best device efficiency of 15.41 % among acceptors with six terminals, demonstrating two pioneered yet highly promising 6-cantilever molecular innovation platforms.

Complete Peripheral Fluorination of the Small-Molecule Acceptor in Organic Solar Cells Yields Efficiency over 19 .

Due to the intrinsically flexible molecular skeletons and loose aggregations, organic semiconductors, like small molecular acceptors (SMAs) in organic solar cells (OSCs), greatly suffer from larger structural/packing disorders and weaker intermolecular interactions comparing to their inorganic counterparts, further leading to hindered exciton diffusion/dissociation and charge carrier migration in resulting OSCs. To overcome this challenge, complete peripheral fluorination was performed on basis of a two-dimensional (2D) conjugation extended molecular platform of CH-series SMAs, rendering an acceptor of CH8F with eight fluorine atoms surrounding the molecular backbone. Benefitting from the broad 2D backbone, more importantly, strengthened fluorine-induced secondary interactions, CH8F and its D18 blends afford much enhanced and more ordered molecular packings accompanying with enlarged dielectric constants, reduced exciton binding energies and more obvious fibrillary networks comparing to CH6F controls. Consequently, D18:CH8F-based OSCs reached an excellent efficiency of 18.80 %, much better than that of 17.91 % for CH6F-based ones. More excitingly, by employing D18-Cl that possesses a highly similar structure to D18 as a third component, the highest efficiency of 19.28 % for CH-series SMAs-based OSCs has been achieved so far. Our work demonstrates the dramatical structural multiformity of CH-series SMAs, meanwhile, their high potential for constructing record-breaking OSCs through peripheral fine-tuning.

A rare case of brominated small molecule acceptors for high-efficiency organic solar cells.

Given that bromine possesses similar properties but extra merits of easily synthesizing and polarizing comparing to homomorphic fluorine and chlorine, it is quite surprising very rare high-performance brominated small molecule acceptors have been reported. This may be caused by undesirable film morphologies stemming from relatively larger steric hindrance and excessive crystallinity of bromides. To maximize the advantages of bromides while circumventing weaknesses, three acceptors (CH20, CH21 and CH22) are constructed with stepwise brominating on central units rather than conventional end groups, thus enhancing intermolecular packing, crystallinity and dielectric constant of them without damaging the favorable intermolecular packing through end groups. Consequently, PM6:CH22-based binary organic solar cells render the highest efficiency of 19.06% for brominated acceptors, more excitingly, a record-breaking efficiency of 15.70% when further thickening active layers to ~500 nm. By exhibiting such a rare high-performance brominated acceptor, our work highlights the great potential for achieving record-breaking organic solar cells through delicately brominating.

Extending Se substitution to the limit: from 5S to 5Se in high-efficiency non-fullerene acceptors.

Based on the newly synthesized seleno[3,2-b]selenophene unit, two near-infrared non-fullerene acceptors (NFAs) of 4Se and 5Se are constructed by replacing four or all sulfurs with selenium in high-efficiency Y-series NFAs. Consequently, binary devices based on 4Se and 5Se afford PCEs of 15.17% and 15.23%, respectively, with a photoelectric response approaching 1000 nm. More excitingly, the energy loss of the 5Se-based device was as low as 0.477 eV along with almost the smallest non-radiative loss of ∼0.15 eV thus far.

Electronic Configuration Tuning of Centrally Extended Non-Fullerene Acceptors Enabling Organic Solar Cells with Efficiency Approaching 19 .

In the molecular optimizations of non-fullerene acceptors (NFAs), extending the central core can tune the energy levels, reduce nonradiative energy loss, enhance the intramolecular (donor-acceptor and acceptor-acceptor) packing, facilitate the charge transport, and improve device performance. In this study, a new strategy was employed to synthesize acceptors featuring conjugation-extended electron-deficient cores. Among these, the acceptor CH-BBQ, embedded with benzobisthiadiazole, exhibited an optimal fibrillar network morphology, enhanced crystallinity, and improved charge generation/transport in blend films, leading to a power conversion efficiency of 18.94 % for CH-BBQ-based ternary organic solar cells (OSCs; 18.19 % for binary OSCs) owing to its delicate structure design and electronic configuration tuning. Both experimental and theoretical approaches were used to systematically investigate the influence of the central electron-deficient core on the properties of the acceptor and device performance. The electron-deficient core modulation paves a new pathway in the molecular engineering of NFAs, propelling relevant research forward.

Central Unit Fluorination of Non-Fullerene Acceptors Enables Highly Efficient Organic Solar Cells with Over 18 % Efficiency.

Halogenation of terminal of acceptors has been shown to give dramatic improvements in power conversion efficiencies (PCEs) of organic solar cells (OSCs). Similar significant results could be expected from the halogenation of the central units of state-of-the-art Y-series acceptors. Herein, a pair of acceptors, termed CH6 and CH4, featuring a conjugation-extended phenazine central unit with and without fluorination, have been synthesized. The fluorinated CH6 has enhanced molecular interactions and crystallinity, superior fibrillar network morphology and improved charge generation and transport in blend films, thus affording a higher PCE of 18.33 % for CH6-based binary OSCs compared to 16.49 % for the non-fluorinated CH4. The new central site offers further opportunities for structural optimization of Y-series molecules to afford better-performed OSCs and reveals the effectiveness of fluorination on central units.

All-Small-Molecule Organic Solar Cells with Efficiency Approaching 16% and FF over 80.

Molecule engineering has been demonstrated as a valid strategy to adjust the active layer morphology in all-small-molecule organic solar cells (ASM-OSCs). In this work, two non-fullerene acceptors (NFAs), FO-2Cl and FO-EH-2Cl, with different alkyl side chains are reported and applied in ASC-OSCs. Compared with FO-2Cl, FO-EH-2Cl is designed by replacing the octyl alkyl chains with branched iso-octyl alkyl chains, leading to an enhanced molecular packing, crystallinity, and redshifted absorption. With a small molecule BSFTR as donor, the device of BSFTR:FO-EH-2Cl obtains a better morphology and achieves a higher power conversion efficiency (PCE) of 15.78% with a notable fill factor (FF) of 80.44% than that of the FO-2Cl-based device with a PCE of 15.27% and FF of 78.41%. To the authors' knowledge, the FF of 80.44% is the highest value in ASM-OSCs. These results demonstrate a good example of fine-tuning the molecular structure to achieve suitable active layer morphology with promising performance for ASM-OSCs, which can provide valuable insight into material design for high-efficiency ASM-OSCs.

A recoverable dendritic polyamidoamine immobilized TEMPO for efficient catalytic oxidation of cellulose.

Polyamidoamine (PAMAM) dendrimers of G1.0 and 2.0 were synthesized by the repeated Michael addition and ester aminolysis of ethylenediamine and methyl acrylate. Through the reductive amination reaction of primary amines in PAMAM and carbonyl groups in 4-oxo-2,2,6,6-tetramethylpiperidine-1-oxyl (4-oxo-TEMPO), the water-soluble PAMAM immobilized TEMPO (PAMAM-TEMPO) was successfully prepared. The obtained PAMAM-TEMPO was characterized by Fourier transform infrared spectroscopy (FT-IR) and ultraviolet-visible spectrophotometer (UV-vis). PAMAM-TEMPO was used as catalyst instead of free TEMPO for selective catalytic oxidation of primary hydroxyl groups in cellulose with water as reaction medium. The results showed that the catalytic performance of G1.0 PAMAM-TEMPO with 28.8% TEMPO loading was equivalent to free TEMPO. After salting out the supernatant of oxidation mixture, PAMAM-TEMPO was recovered by extraction with N,N-dimethylformamide and reused for further oxidation cycles. No significant reduction in catalytic performance was found after 4 oxidation cycles. The recovery of PAMAM-TEMPO after each cycle was about 90%. By sonication of oxidized cellulose obtained with G1.0 PAMAM-TEMPO as catalyst, the individualized cellulose nanofibers with approximately 10 nm in diameter were successfully prepared. This is the first report on the use of immobilized TEMPO catalysts comparable to the performance of free TEMPO to oxidize cellulose in water.