Urine biomarkers in type 2 diabetes mellitus with or without microvascular complications.

OBJECTIVE: To investigate the distribution of nine (9) urine biomarkers in people living with type 2 diabetes mellitus (T2DM), with or without microvascular complications. METHODS: In total, 407 people with T2DM were enrolled from 2021 to 2022. According to diabetic retinopathy (DR) and urinary albumin-creatinine ratio (UACR), the 407 people were divided into four (4) groups, DR(-)UACR(-), DR(+)UACR(-), DR(-)UACR(+), and DR( + )UACR(+). In addition, 112 healthy volunteers were enrolled during the same period. The nine (9) urine markers included α1-microglobulin (u-α1MG), immunoglobulin G (u-IgG), neutrophil gelatinase-associated lipid carrier protein (u-NGAL), cystatin C (u-CysC), retinol-binding protein (u-RBP), ß2-microglobulin (u-ß2MG), N-acetyl-ß-D-glucosaminidase (u-NAG), transferrin (u-Trf), and collagen type IV (u-Col). For each marker, the respective level of 97.5 percentile in healthy volunteers was taken as an upper reference limit. RESULTS: Among the 407 people, 248 individuals (61%) were DR(-)UACR(-), 100 (25%) were DR(-)UACR(+), 37 (9%) were DR(+)UACR(-), and 22 (5%) were DR(+)UACR(+). The u-NAG/Cr biomarker level showed a significant difference between healthy participants and people with T2DM. In the DR(-)UACR(-)group, u-Trf/Cr showed the highest positive rate (21.37%), followed by u-IgG/Cr (14.52%); u-NAG/Cr (10.48%); u-ß2MG/Cr (4.44%); u-CysC/Cr (4.03%); u-NGAL/Cr (4.03%); u-RBP/Cr (2.82%); u-α1MG/Cr (2.42%); 17.34% of people with T2DM showed multiple biomarkers positive (≥2 biomarkers). The positive rates of one biomarker (21.33%) and two biomarkers (18.67%) in people who have less than five (5) years of T2DM were almost close to those of the DR(-)UACR(-) group (21.37%, and 12.10%, respectively). CONCLUSION: Renal tubule biomarkers may be used as an indicator in the early detection and monitoring of renal injury in diabetes mellitus. The u-NAG biomarker should be measured for the people with T2DM of the first-time diagnosis.

Microfluidic fabrication of monodisperse microcapsules with gas cores.

A facile strategy for efficient and continuous fabrication of monodisperse gas-core microcapsules with controllable sizes and excellent ultrasound-induced burst performances is developed based on droplet microfluidics and interfacial polymerization. Monodisperse gas-in-oil-in-water (G/O/W) double emulsion droplets with a gas core and monomer-contained oil layer are fabricated in the upstream of a microfluidic device as templates, and then water-soluble monomers are added into the aqueous continuous phase in the downstream to initiate rapid interfacial polymerization at the O/W interfaces to prepare monodisperse gas-in-oil-in-solid (G/O/S) microcapsules with gas cores. The sizes of both microbubbles and G/O/W droplet templates can be precisely controlled by adjusting the gas supply pressure and the fluid flow rates. Due to the very thin shells of G/O/S microcapsules fabricated via interfacial polymerization, the sizes of the resultant G/O/S microcapsules are almost the same as those of the G/O/W droplet templates, and the microcapsules exhibit excellent deformable properties and ultrasound-induced burst performances. The proposed strategy provides a facile and efficient route for controllably and continuously fabricating monodisperse microcapsules with gas cores, which are highly desired for biomedical applications.

Performance of continuous glucose monitoring in patients with acute respiratory failure: a prospective, single-center observational study.

OBJECTIVE: Continuous glucose monitoring (CGM) may have benefits in achieving glycemic control in critically ill patients. The aim of this study was to assess the accuracy of the Freestyle Libre H (professional version of the Libre Pro). in patients with acute respiratory failure (ARF) in the intensive care unit (ICU). METHODS: 52 adult patients with ARF were selected. The performance of CGM was evaluated using arterial blood glucose (aBG) and point-of-care (POC) glucose as reference values. Numerical accuracy was evaluated by the mean absolute relative difference (MARD), Bland-Altman analysis, and %15/15(the percentage of CGM values within 15 mg/dL or 15% of reference values <100 mg/dL or >100mg/dL, respectively), %20/20 and %30/30; Clinical accuracy was assessed by Clarke error grid analysis. RESULTS: 519 and 1504 pairs of aBG/CGM and POC/CGM glucose values were analyzed. The MARD values were 13.8% and 14.7%, respectively. The mean deviation of the Bland‒Altman analysis was 0.82 mmol/L and 0.81 mmol/L. %15/15, %20/20 and %30/30 of aBG values were 62.6%, 75.5%, and 92.4%, respectively; %15/15, %20/20 and %30/30 of POC values were 57.1%, 72.9%, and 88.7%, respectively. The Clarke error grid analysis showed that 97.8% and 99.3% of the values located in the (A+B) zone. Additionally, accuracy of CGM is not affected by general patient factors. CONCLUSION: This study demonstrated that the accuracy of CGM in patients with ARF is lower than that in most outpatients, and it is not affected by general patient factors. Whether CGM is beneficial to glucose management in ICU needs further evaluation.

Effects of Cognitive Behavioural Therapy on Mental Health and Sleep in Acute Kidney Injury Patients with Ureteral Calculi in the Emergency Department: A Retrospective Study.

BACKGROUND: Acute kidney injury (AKI) resulting from ureteral stones in the emergency department is typically accompanied with anxiety and sleep issues in patients, which can have adverse effects on their mental health and quality of life. Cognitive behavioural therapy (CBT) is helpful in improving mental health and sleep. This work aims to analyse the effects of CBT on mental health and sleep of AKI patients caused by ureteral calculi in the emergency department. METHODS: The clinical data of patients with AKI caused by ureteral calculi in the emergency department of our hospital from February 2021 to February 2023 were retrospectively analyzed. The patients were divided into the control group (routine nursing) and observation group (cognitive behavioural nursing) according to the different nursing methods of data recording. Propensity Score Matching (PSM) was used to balance the confounding factors of the two groups. After matching, the State Trait Anxiety Inventory (STAI), Insomnia Severity Index (ISI), Mishel Uncertainty in Illness Scale-Adult (MUIS) and 36-Item Short-Form Health Survey (SF-36) were compared between the two groups. RESULTS: After matching at a ratio of 1:1, 130 patients were included in the observation group and the control group, with 65 cases in each group. No significant difference was observed in STAI, ISI, MUIS and SF-36 scores between the two groups before nursing (p > 0.05). After nursing, the STAI, ISI and MUIS scores of the observation group were lower than those of the control group (p < 0.05). Furthermore, the SF-36 score of the observation group was higher than that of the control group (p < 0.05). CONCLUSIONS: Cognitive behavioural nursing for patients with AKI caused by ureteral calculi in the emergency department may help in retrieving patients' anxiety, reducing the severity of disease uncertainty and insomnia, improving the quality of life of patients and providing theoretical reference for clinical practice.

Interleukin-1 beta (IL-1ß) as adjuvant enhances the immune effects of Aeromonas veronii inactivated vaccine in largemouth bass (Micropterus salmoides).

Largemouth bass (Micropterus salmoides) has emerged as a significant economic fish species, with a rise in Aeromonas veronii infections in farming. However, research on adjuvants for vaccines against A. veronii in largemouth bass remains scarce. In present study, recombinant largemouth bass IL-1ß (LbIL-1ß) was expressed to explore its adjuvant effect on the A. veronii inactivated vaccine. Following vaccination with recombinant LbIL-1ß (rLbIL-1ß) and the inactivated A. veronii, higher serum SOD levels and lysozyme activities were observed in largemouth bass from inactivated A. veronii + rLbIL-1ß vaccinated group. Furthermore, it was discovered that rLbIL-1ß was able to boost the serum-specific antibody levels induced by the inactivated A. veronii. The qRT-PCR analysis revealed that rLbIL-1ß also enhanced the expression of IgM, CD4, and MHC II in largemouth bass triggered by the inactivated A. veronii. After challenged with live A. veronii, the outcomes demonstrated that the relative percentage survival (RPS) for largemouth bass resulting from the inactivated A. veronii in combination with rLbIL-1ß was 76.67 %, surpassing the RPS of 60 % in the inactivated A. veronii group. Collectively, these findings indicate that rLbIL-1ß enhances the protective effect of the A. veronii inactivated vaccine on largemouth bass, showcasing potential as an adjuvant for further development.

Genomic structures of insulin-like growth factor from golden pompano (Trachinotus ovatus) and their expression responses to the feed types.

Golden pompano is an important aquaculture product in the coastal regions of southern China, which is highly dependent on insulin-like growth factor (IGF) for various biological processes. The cDNAs of ToIGF1, ToIGF2, and ToIGF3 are 1718 bp, 1658 bp, and 2272 bp in length, respectively, with corresponding amino acid sequences of 185 aa, 215 aa, and 194 aa. These sequences consist of 5 parts, including the signal peptide, the B domain, the C domain, the A domain, the D domain, and the E domain, which are also found in other species. While ToIGF1 has no SSR polymorphism, ToIGF2 and ToIGF3 have 3 and 1 SSR polymorphism sites, respectively. In terms of tissue expression, ToIGF1 is predominantly expressed in the liver, ToIGF2 shows its highest expression in the gills, and ToIGF3 also shows its highest expression in the gills, but no expression in the liver and spleen. These tissue distribution results suggest that ToIGFs are not only present in growth-related tissues such as the brain, muscle, and liver, but also in reproductive tissues, tissues that regulate osmotic pressure, and tissues related to food intake. This observation is consistent with other bony fish species and highlights the extensive biological functions of ToIGFs that need to be further explored and exploited. In addition, the expression levels of ToIGFs were found to be different in the different dietary groups, including the pelleted food group, the frozen squid group, and the frozen fish group. In the pelleted diet group, ToIGF1 and ToIGF2 were highly expressed in the liver and intestinal tissues, followed by the frozen fish group. These results suggest that the type of diet can affect the body's energy metabolism by influencing tissue expression of growth-related genes, which in turn affects individual growth.

Innovative technologies for the fabrication of 3D/4D smart hydrogels and its biomedical applications - A comprehensive review.

Repairing and regenerating damaged tissues or organs, and restoring their functioning has been the ultimate aim of medical innovations. 'Reviving healthcare' blends tissue engineering with alternative techniques such as hydrogels, which have emerged as vital tools in modern medicine. Additive manufacturing (AM) is a practical manufacturing revolution that uses building strategies like molding as a viable solution for precise hydrogel manufacturing. Recent advances in this technology have led to the successful manufacturing of hydrogels with enhanced reproducibility, accuracy, precision, and ease of fabrication. Hydrogels continue to metamorphose as the vital compatible bio-ink matrix for AM. AM hydrogels have paved the way for complex 3D/4D hydrogels that can be loaded with drugs or cells. Bio-mimicking 3D cell cultures designed via hydrogel-based AM is a groundbreaking in-vivo assessment tool in biomedical trials. This brief review focuses on preparations and applications of additively manufactured hydrogels in the biomedical spectrum, such as targeted drug delivery, 3D-cell culture, numerous regenerative strategies, biosensing, bioprinting, and cancer therapies. Prevalent AM techniques like extrusion, inkjet, digital light processing, and stereo-lithography have been explored with their setup and methodology to yield functional hydrogels. The perspectives, limitations, and the possible prospects of AM hydrogels have been critically examined in this study.

Neuronal population activity in the olivocerebellum encodes the frequency of essential tremor in mice and patients.

Essential tremor (ET) is the most prevalent movement disorder, characterized primarily by action tremor, an involuntary rhythmic movement with a specific frequency. However, the neuronal mechanism underlying the coding of tremor frequency remains unexplored. Here, we used in vivo electrophysiology, optogenetics, and simultaneous motion tracking in the Grid2dupE3 mouse model to investigate whether and how neuronal activity in the olivocerebellum determines the frequency of essential tremor. We report that tremor frequency was encoded by the temporal coherence of population neuronal firing within the olivocerebellums of these mice, leading to frequency-dependent cerebellar oscillations and tremors. This mechanism was precise and generalizable, enabling us to use optogenetic stimulation of the deep cerebellar nuclei to induce frequency-specific tremors in wild-type mice or alter tremor frequencies in tremor mice. In patients with ET, we showed that deep brain stimulation of the thalamus suppressed tremor symptoms but did not eliminate cerebellar oscillations measured by electroencephalgraphy, indicating that tremor-related oscillations in the cerebellum do not require the reciprocal interactions with the thalamus. Frequency-disrupting transcranial alternating current stimulation of the cerebellum could suppress tremor amplitudes, confirming the frequency modulatory role of the cerebellum in patients with ET. These findings offer a neurodynamic basis for the frequency-dependent stimulation of the cerebellum to treat essential tremor.

Prognostic and Predictive Significance of Ki67 in Primary Non-metastatic or Recurrent Acral Melanoma: Evidence from a Multicenter Retrospective Study.

BACKGROUND: The purpose of this work was to investigate the prognostic significance of Ki67 in acral melanoma (AM). PATIENTS AND METHODS: Ki67 values in primary lesions (pKi67) of 481 patients with primary non-metastatic AM (primary cohort) from three tertiary hospitals and in recurrent lesions (rKi67) of 97 patients (recurrent cohort) were recorded. The associations of p/rKi67 with clinicopathological features and prognosis were analyzed. RESULTS: In the primary cohort, high pKi67 group tended to have more ulceration, pT4, lymph node metastasis (LNM), nodal macrometastases, and recurrence (all P < 0.05). Logistic regression analysis revealed that pKi67 was significantly associated with pT4 and LNM (P = 0.004 and 0.027, respectively). Furthermore, both 5-year overall survival (OS) and recurrence-free survival (RFS) rates in high pKi67 group were significantly worse than those in moderate and low pKi67 groups (OS 47.8% versus 55.7 versus 76.8%, P = 0.002; RFS: 27.1 versus 42.8 versus 61.8%, P < 0.001). Similarly, in the recurrent cohort, the 5-year survival after recurrence (SAR) rates in high rKi67 group was significantly worse than those in moderate and low rKi67 groups (31.7 versus 47.4 versus 75%; P = 0.026). Stratified analysis also indicated a significant survival difference among pKi67 groups within various subgroups. Most importantly, multivariate Cox analysis demonstrated that pKi67 could be independently associated with OS and RFS, as well as rKi67 for SAR (all P < 0.05). CONCLUSIONS: A high Ki67 value was significantly associated with adverse pathological and prognostic features in both primary and recurrent AM cohorts. Ki67 should be routinely evaluated to guide risk stratification and prognostic prediction.

Exciton polariton condensation from bound states in the continuum at room temperature.

Exciton-polaritons (polaritons) resulting from the strong exciton-photon interaction stimulates the development of novel low-threshold coherent light sources to circumvent the ever-increasing energy demands of optical communications1-3. Polaritons from bound states in the continuum (BICs) are promising for Bose-Einstein condensation owing to their theoretically infinite quality factors, which provide prolonged lifetimes and benefit the polariton accumulations4-7. However, BIC polariton condensation remains limited to cryogenic temperatures ascribed to the small exciton binding energies of conventional material platforms. Herein, we demonstrated room-temperature BIC polariton condensation in perovskite photonic crystal lattices. BIC polariton condensation was demonstrated at the vicinity of the saddle point of polariton dispersion that generates directional vortex beam emission with long-range coherence. We also explore the peculiar switching effect among the miniaturized BIC polariton modes through effective polariton-polariton scattering. Our work paves the way for the practical implementation of BIC polariton condensates for integrated photonic and topological circuits.

Phase and Composition Engineering of Self-Intercalated 2D Metallic Tantalum Sulfide for Second-Harmonic Generation.

Self-intercalation in two-dimensional (2D) materials is significant, as it offers a versatile approach to modify material properties, enabling the creation of interesting functional materials, which is essential in advancing applications across various fields. Here, we define ic-2D materials as covalently bonded compounds that result from the self-intercalation of a metal into layered 2D compounds. However, precisely growing ic-2D materials with controllable phases and self-intercalation concentrations to fully exploit the applications in the ic-2D family remains a great challenge. Herein, we demonstrated the controlled synthesis of self-intercalated H-phase and T-phase Ta1+xS2 via a temperature-driven chemical vapor deposition (CVD) approach with a viable intercalation concentration spanning from 10% to 58%. Atomic-resolution scanning transmission electron microscopy-annular dark field imaging demonstrated that the self-intercalated Ta atoms occupy the octahedral vacancies located at the van der Waals gap. The nonperiodic Ta atoms break the centrosymmetry structure and Fermi surface properties of intrinsic TaS2. Therefore, ic-2D T-phase Ta1+xS2 consistently exhibit a spontaneous nonlinear optical (NLO) effect regardless of the sample thickness and self-intercalation concentrations. Our results propose an approach to activate the NLO response of centrosymmetric 2D materials, achieving the modulation of a wide range of optoelectronic properties via nonperiodic self-intercalation in the ic-2D family.

Comparison of Micro-flow Imaging and Contrast-Enhanced Ultrasound in Ultrasound-Guided Microwave Ablation of Benign Thyroid Nodules.

OBJECTIVE: The study described here was aimed at ascertaining the utility of micro-flow imaging (MFI) during ultrasound (US)-guided microwave ablation (MWA) of thyroid nodules by contrasting its effectiveness with that of contrast-enhanced ultrasound (CEUS). METHODS: Seventy-three patients with eighty-eight thyroid nodules who underwent US-guided MWA were included in our study from January 2020 to June 2023. Thirty-five patients underwent CEUS during the MWA process, and thirty-eight patients underwent MFI during the MWA process. We compared the two groups' baseline characteristics, tumor volume (V), volume reduction rate (VRR), complications and clinical characteristics. RESULTS: Both groups exhibited similar outcomes with respect to V and VRR at 1, 3, 6, 12 and 18 mo after MWA (p > 0.05). Consistency was observed with respect to post-operative complications, supplementary ablation times and surgical duration (p > 0.05). It is worth noting that the MFI group had lower treatment costs compared with the CEUS group (11,337.64 ± 80.93 yuan for the MFI group versus 12,971.23 ± 254.89 yuan for the CEUS group, p < 0.05). CONCLUSION: In the MWA procedure for thyroid nodules, MFI is similar to CEUS with respect to safety and efficacy. Simultaneously, it offers the advantage of reducing surgical expenses, which lessens the economic burden for patients.

Boosting exciton mobility approaching Mott-Ioffe-Regel limit in Ruddlesden-Popper perovskites by anchoring the organic cation.

Exciton transport in two-dimensional Ruddlesden-Popper perovskite plays a pivotal role for their optoelectronic performance. However, a clear photophysical picture of exciton transport is still lacking due to strong confinement effects and intricate exciton-phonon interactions in an organic-inorganic hybrid lattice. Herein, we present a systematical study on exciton transport in (BA)2(MA)n-1PbnI3n+1 Ruddlesden-Popper perovskites using time-resolved photoluminescence microscopy. We reveal that the free exciton mobilities in exfoliated thin flakes can be improved from around 8 cm2 V-1 s-1 to 280 cm2V-1s-1 by anchoring the soft butyl ammonium cation with a polymethyl methacrylate network at the surface. The mobility of the latter is close to the theoretical limit of Mott-Ioffe-Regel criterion. Combining optical measurements and theoretical studies, it is unveiled that the polymethyl methacrylate network significantly improve the lattice rigidity resulting in the decrease of deformation potential scattering and lattice fluctuation at the surface few layers. Our work elucidates the origin of high exciton mobility in Ruddlesden-Popper perovskites and opens up avenues to regulate exciton transport in two-dimensional materials.

Two birds with one stone: One-pot concurrent Ta-doping and -coating on Ni-rich LiNi0.92Co0.04Mn0.04O2 cathode materials with fiber-type microstructure and Li+-conducting layer formation.

A novel scalable Taylor-Couette reactor (TCR) synthesis method was employed to prepare Ta-modified LiNi0.92Co0.04Mn0.04O2 (T-NCM92) with different Ta contents. Through experiments and density functional theory (DFT) calculations, the phase and microstructure of Ta-modified NCM92 were analyzed, showing that Ta provides a bifunctional (doping and coating at one time) effect on LiNi0.92Co0.04Mn0.04O2 cathode material through a one-step synthesis process via a controlling suitable amount of Ta and Li-salt. Ta doping allows the tailoring of the microstructure, orientation, and morphology of the primary NCM92 particles, resulting in a needle-like shape with fine structures that considerably enhance Li+ ion diffusion and electrochemical charge/discharge stability. The Ta-based surface-coating layer effectively prevented microcrack formation and inhibited electrolyte decomposition and surface-side reactions during cycling, thereby significantly improving the electrochemical performance and long-term cycling stability of NCM92 cathodes. Our as-prepared NCM92 modified with 0.2 mol% Ta (i.e., T2-NCM92) exhibits outstanding cyclability, retaining 84.5 % capacity at 4.3 V, 78.3 % at 4.5 V, and 67.6 % at 45 â„ƒ after 200 cycles at 1C. Even under high-rate conditions (10C), T2-NCM92 demonstrated a remarkable capacity retention of 66.9 % after 100 cycles, with an initial discharge capacity of 157.6 mAh g-1. Thus, the Ta modification of Ni-rich NCM92 materials is a promising option for optimizing NCM cathode materials and enabling their use in real-world electric vehicle (EV) applications.

Doping-Induced Surface and Grain Boundary Effects in Ni-Rich Layered Cathode Materials.

In this work, the effects of dopant size and oxidation state on the structure and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 (NCM811) are investigated. It is shown that doping with boron (B) which has a small ionic radius and an oxidation state of 3+, leads to the formation of a boron oxide-containing surface coating (probably Li3BO3), mainly on the outer surface of the secondary particles. Due to this effect, boron only slightly affects the size of the primary particle and the initial capacity, but significantly improves the capacity retention. On the other hand, the dopant ruthenium (Ru) with a larger ionic radius and a higher oxidation state of 5+ can be stabilized within the secondary particles and does not experience a segregation to the outer agglomerate surface. However, the Ru dopant preferentially occupies incoherent grain boundary sites, resulting in smaller primary particle size and initial capacity than for the B-doped and pristine NCM811. This work demonstrates that a small percentage of dopant (2 mol%) cannot significantly affect bulk properties, but it can strongly influence the surface and/or grain boundary properties of microstructure and thus the overall performance of cathode materials.

Dissolving microneedle system containing Ag nanoparticle-decorated silk fibroin microspheres and antibiotics for synergistic therapy of bacterial biofilm infection.

Most cases of delayed wound healing are associated with bacterial biofilm infections due to high antibiotic resistance. To improve patient compliance and recovery rates, it is critical to develop minimally invasive and efficient methods to eliminate bacterial biofilms as an alternative to clinical debridement techniques. Herein, we develop a dissolving microneedle system containing Ag nanoparticles (AgNPs)-decorated silk fibroin microspheres (SFM-AgNPs) and antibiotics for synergistic treatment of bacterial biofilm infection. Silk fibroin microspheres (SFM) are controllably prepared in an incompatible system formed by a mixture of protein and carbohydrate solutions by using a mild all-aqueous phase method and serve as biological templates for the synthesis of AgNPs. The SFM-AgNPs exert dose- and time-dependent broad-spectrum antibacterial effects by inducing bacterial adhesion. The combination of SFM-AgNPs with antibiotics breaks the limitation of the antibacterial spectrum and achieves better efficacy with reduced antibiotic dosage. Using hyaluronic acid (HA) as the soluble matrix, the microneedle system containing SFM-AgNPs and anti-Gram-positive coccus drug (Mupirocin) inserts into the bacterial biofilms with sufficient strength, thereby effectively delivering the antibacterial agents and realizing good antibiofilm effect on Staphylococcus aureus-infected wounds. This work demonstrates the great potential for the development of novel therapeutic systems for eradicating bacterial biofilm infections.

The mechanisms of ferroptosis and its role in atherosclerosis.

Ferroptosis is a newly identified form of non-apoptotic programmed cell death, characterized by the iron-dependent accumulation of lethal lipid reactive oxygen species (ROS) and peroxidation of membrane polyunsaturated fatty acid phospholipids (PUFA-PLs). Ferroptosis is unique among other cell death modalities in many aspects. It is initiated by excessive oxidative damage due to iron overload and lipid peroxidation and compromised antioxidant defense systems, including the system Xc-/ glutathione (GSH)/glutathione peroxidase 4 (GPX4) pathway and the GPX4-independent pathways. In the past ten years, ferroptosis was reported to play a critical role in the pathogenesis of various cardiovascular diseases, e.g., atherosclerosis (AS), arrhythmia, heart failure, diabetic cardiomyopathy, and myocardial ischemia-reperfusion injury. Studies have identified dysfunctional iron metabolism and abnormal expression profiles of ferroptosis-related factors, including iron, GSH, GPX4, ferroportin (FPN), and SLC7A11 (xCT), as critical indicators for atherogenesis. Moreover, ferroptosis in plaque cells, i.e., vascular endothelial cell (VEC), macrophage, and vascular smooth muscle cell (VSMC), positively correlate with atherosclerotic plaque development. Many macromolecules, drugs, Chinese herbs, and food extracts can inhibit the atherogenic process by suppressing the ferroptosis of plaque cells. In contrast, some ferroptosis inducers have significant pro-atherogenic effects. However, the mechanisms through which ferroptosis affects the progression of AS still need to be well-known. This review summarizes the molecular mechanisms of ferroptosis and their emerging role in AS, aimed at providing novel, promising druggable targets for anti-AS therapy.

The impact of serum estradiol and progesterone levels during implantation on obstetrical complications and perinatal outcomes in frozen embryo transfer.

BACKGROUND: This study sought to evaluate obstetric complications and perinatal outcomes in frozen embryo transfer (FET) using either a natural cycle (NC-FET) or a hormone therapy cycle (HT-FET). Furthermore, we investigated how serum levels of estradiol (E2) and progesterone (P4) on the day of and 3 days after embryo transfer (ET) correlated with clinical outcomes in the two groups. METHODS: We conducted a retrospective, single-center study from January 1, 2015, to December 31, 2019. The study included couples who underwent NC-FET or HT-FET resulting in a singleton live birth. Serum levels of E2 and P4 were measured on the day of and 3 days after ET. The primary outcomes assessed were preterm birth rate, low birth weight, macrosomia, hypertensive disorders in pregnancy, gestational diabetes mellitus, postpartum hemorrhage, and placenta-related complications. RESULTS: A total of 229 singletons were included, with 49 in the NC-FET group and 180 in the HT-FET group. There were no significant differences in obstetric complications and perinatal outcomes between the two groups. The NC-FET group had significantly higher serum levels of P4 (17.2 ng/mL vs 8.85 ng/mL; p < 0.0001) but not E2 (144 pg/mL vs 147 pg/mL; p = 0.69) on the day of ET. Additionally, 3 days after ET, the NC-FET group had significantly higher levels of both E2 (171 pg/mL vs 140.5 pg/mL; p = 0.0037) and P4 (27.3 ng/mL vs 11.7 ng/mL; p < 0.0001) compared with the HT-FET group. CONCLUSION: Our study revealed that although there were significant differences in E2 and P4 levels around implantation between the two groups, there were no significant differences in obstetric complications and perinatal outcomes. Therefore, the hormonal environment around implantation did not appear to be the primary cause of differences in obstetric and perinatal outcomes between the two EM preparation methods used in FET.

Functional characterization of four antenna-biased chemosensory proteins in Dioryctria abietella reveals a broadly tuned olfactory DabiCSP1 and its key residues in ligand-binding.

The orientation of the oligophagous cone-feeding moth Dioryctria abietella (Lepidoptera: Pyralidae) to host plants primarily relies on olfactory-related proteins, particularly those candidates highly expressed in antennae. Here, through a combination of expression profile, ligand-binding assay, molecular docking and site-directed mutagenesis strategies, we characterized the chemosensory protein (CSP) gene family in D. abietella. Quantitative real-time PCR (qPCR) analyses revealed the detectable expression of all 22 DabiCSPs in the antennae, of which seven genes were significantly enriched in this tissue. In addition, the majority of the genes (19/22 relatives) had the expression in at least one reproductive tissue. In the interactions of four antenna-dominant DabiCSPs and different chemical classes, DabiCSP1 was broadly tuned to 27 plant-derived odors, three man-made insecticides and one herbicide with high affinities (Ki < 6.60 µM). By contrast, three other DabiCSPs (DabiCSP4, CSP6 and CSP17) exhibited a narrow odor binding spectrum, in response to six compounds for each protein. Our mutation analyses combined with molecular docking simulations and binding assays further identified four key residues (Tyr25, Thr26, Ile65 and Val69) in the interactions of DabiCSP1 and ligands, of which binding abilities of this protein to 12, 15, 16 and three compounds were significantly decreased compared to the wildtype protein, respectively. Our study reveals different odor binding spectra of four DabiCSPs enriched in antennae and identifies key residues responsible for the binding of DabiCSP1 and potentially active compounds for the control of this pest.