RESUMEN
Rechargeable magnesium batteries (RMBs) have received increased attention due to their high volumetric capacity and safety. Nevertheless, the sluggish diffusion kinetics of highly polarized Mg2+ in host lattices severely hinders the development of RMBs. Herein, we report an electron injection strategy for modulating the Mo 4d-orbital splitting manner and first fabricate a dual-phase MoO2.8F0.2/MoO2.4F0.6 heterostructure to accelerate Mg2+ diffusion. The electron injection strategy triggers weak Jahn-Teller distortion in MoO6 octahedra and reorganization of the Mo 4d-orbital, leading to a partial phase transition from orthorhombic phase MoO2.8F0.2 to cubic phase MoO2.4F0.6. As a result, the designed heterostructure generates a built-in electric field, simultaneously improving its electronic conductivity and ionic diffusivity by at least one order of magnitude compared to MoO2.8F0.2 and MoO2.4F0.6. Importantly, the assembled MoO2.8F0.2/MoO2.4F0.6//Mg full cell exhibits a remarkable reversible capacity of 172.5 mAh g-1 at 0.1 A g-1, pushing forward the orbital-scale manipulation for high-performance RMBs.
RESUMEN
Potassium ion batteries (PIBs) are a viable alternative to lithium-ion batteries for energy storage. Red phosphorus (RP) has attracted a great deal of interest as an anode for PIBs owing to its cheapness, ideal electrode potential, and high theoretical specific capacity. However, the direct preparation of phosphorus-carbon composites usually results in exposure of the RP to the exterior of the carbon layer, which can lead to the deactivation of the active material and the production of "dead phosphorus". Here, the advantage of the π-π bond conjugated structure and high catalytic activity of metal phthalocyanine (MPc) is used to prepare MPc@RP/C composites as a highly stable anode for PIBs. It is shown that the introduction of MPc greatly improves the uneven distribution of the carbon layer on RP, and thus improves the initial Coulombic efficiency (ICE) of PIBs (the ICE of FePc@RP/C is 75.5% relative to 62.9% of RP/C). The addition of MPc promotes the growth of solid electrolyte interphase with high mechanical strength, improving the cycle stability of PIBs (the discharge-specific capacity of FePc@RP/C is 411.9 mAh g-1 after 100 cycles at 0.05 A g-1). Besides, density functional theory theoretical calculations show that MPc exhibits homogeneous adsorption energies for multiple potassiation products, thereby improving the electrochemical reactivity of RP. The use of organic molecules with high electrocatalytic activity provides a universal approach for designing superior high-capacity, large-volume expansion anodes for PIBs.
RESUMEN
Sol-gel processed zinc oxide (ZnO) is one of the most widely used electron transport layers (ETLs) in inverted organic solar cells (OSCs). The high annealing temperature (≈200 °C) required for sintering to ensure a high electron mobility however results in severe damage to flexible substrates. Thus, flexible organic solar cells based on sol-gel processed ZnO exhibit significantly lower efficiency than rigid devices. In this paper, an indium-doping approach is developed to improve the optoelectronic properties of ZnO layers and reduce the required annealing temperature. Inverted OSCs based on In-doped ZnO (IZO) exhibit a higher efficiency than those based on ZnO for a range of different active layer systems. For the PM6:L8-BO system, the efficiency increases from 17.0% for the pristine ZnO-based device to 17.8% for the IZO-based device. The IZO-based device with an active layer of PM6:L8-BO:BTP-eC9 exhibits an even higher efficiency of up to 18.1%. In addition, a 1.2-micrometer-thick inverted ultrathin flexible organic solar cell is fabricated based on the IZO ETL that achieves an efficiency of 17.0% with a power-per-weight ratio of 40.4 W g-1, which is one of the highest efficiency for ultrathin (less than 10 micrometers) flexible organic solar cells.
RESUMEN
The strategic formulation of a compatible electrolyte plays a pivotal role in extending the longevity of lithium-metal batteries (LMBs). Here, we present findings on a partially fluorinated electrolyte distinguished by a subdued solvation affinity towards Li+ ions and a concentrated anion presence within the primary solvation layer. This distinctive solvation arrangement redirects the focal points of reactions from solvent molecules to anions, facilitating the predominant involvement of anions in the creation of a LiF-enriched solid-electrolyte interphase (SEI). Electrochemical assessments showcase effective Li+ transport kinetics, diminished overpotential polarization for Li nucleation (28â mV), and prolonged cycling durability in Li||Li cells employing the partially fluorinated electrolyte. When tested in Li||NCM811 cells, the designed electrolyte delivers a capacity retention of 89.30 % and exhibits a high average Coulombic efficiency of 99.80 % over 100 cycles with a charge-potential cut-off of 4.6â V vs. Li/Li+ under the current density of 0.4C. Furthermore, even at a current density of 1C, the cells maintain 81.90 % capacity retention and a high average Coulombic efficiency of 99.40 % after 180 cycles. This work underscores the significance of weak-solvation interaction in partially fluorinated electrolytes and highlights the crucial role of solvent structure in enabling the long-term stability and high-energy density of LMBs.
RESUMEN
The discovery of Mn-Ca complex in photosystem II stimulates research of manganese-based catalysts for oxygen evolution reaction (OER). However, conventional chemical strategies face challenges in regulating the four electron-proton processes of OER. Herein, we investigate alpha-manganese dioxide (α-MnO2) with typical MnIV-O-MnIII-HxO motifs as a model for adjusting proton coupling. We reveal that pre-equilibrium proton-coupled redox transition provides an adjustable energy profile for OER, paving the way for in-situ enhancing proton coupling through a new "reagent"- external electric field. Based on the α-MnO2 single-nanowire device, gate voltage induces a 4-fold increase in OER current density at 1.7 V versus reversible hydrogen electrode. Moreover, the proof-of-principle external electric field-assisted flow cell for water splitting demonstrates a 34% increase in current density and a 44.7 mW/cm² increase in net output power. These findings indicate an in-depth understanding of the role of proton-incorporated redox transition and develop practical approach for high-efficiency electrocatalysis.
RESUMEN
CO2 electrochemistry has been considered as a promising cathode reaction for energy storage due to its high theoretical energy density, high electrochemical potential, and ability to fix CO2. However, the low efficiency and poor reversibility of Li-CO2 evolution significantly impede the applications of Li-CO2 batteries. Herein, first-principles calculations were employed to investigate the 21 M1M2N4C dual-atom catalysts and explore the catalytic mechanism for the Li-CO2 evolution reaction. Among these dual-atom catalysts, the MoMoN4C shows the highest adsorption interaction with CO2 due to its high d-center and d-p orbital coupling. The effects of dual-atom sites on the catalytic activities and selectivities were investigated by searching the possible reaction pathways toward the battery-discharging processes in the ether electrolyte with the help of implicit constant electrode potential simulations. The compared results show that the Li-CO2 discharging process was limited by the rate-determining reactions involving *Li + CO2 â *LiCO2 and *LiC2O4@ + Li+ + e- â *CO + Li2CO3, and these processes on graphene are relatively sluggish due to the low onset potential range of -2 to -2.36 V vs. SHE. By contrast, The optimized onset potentials of -1.15 to -1.31 V vs. SHE were obtained at the MoMoN4C active site. Furthermore, the MoMoN4C active site shows a lower energy barrier for the decomposition of *Li2CO3 than the pure graphene, which reveals the MoMoN4C active site with excellent CO2 activation ability can reduce the polarization of the discharging reactions and energy barrier for the CO bond cleavage. This work provides deep insight into the Li-CO2 evolution mechanisms and guides the design of advanced dual-atom catalysts for highly reversible Li-CO2 batteries.
RESUMEN
Hydrogen (H2) has emerged as a highly promising energy carrier owing to its remarkable energy density and carbon emission-free properties. However, the widespread application of H2 fuel has been limited by the difficulty of storage. In this work, spontaneous electrochemical hydrogen production is demonstrated using hydrazine (N2H4) as a liquid hydrogen storage medium and enabled by a highly active Co catalyst for hydrazine electrooxidation reaction (HzOR). The HzOR electrocatalyst is developed by a self-limited growth of Co nanoparticles from a Co-based zeolitic imidazolate framework (ZIF), exhibiting abundant defective surface atoms as active sites for HzOR. Notably, these self-limited Co nanoparticles exhibit remarkable HzOR activity with a negative working potential of -0.1 V (at 10 mA cm-2) in 0.1 m N2H4/1 m KOH electrolyte. Density functional theory (DFT) calculations are employed to validate the superior performance of low-coordinated Co active sites in facilitating HzOR. By taking advantage of the potential difference between HzOR and the hydrogen evolution reaction (HER), a novel HzOR||HER electrochemical system is developed to spontaneously produce H2 without external energy input. Overall, the work offers valuable guidance for developing active HzOR catalyst. The novel HzOR||HER electrochemical system represents a promising and innovative solution for energy-efficient hydrogen production.
RESUMEN
In this study, a rainfall simulation device was employed to investigate the response mechanism of soil leachate and disinfection by-products formation potential (DBPsFP) to extreme precipitation events. The results revealed that the aromaticity of dissolved organic matter (DOM) and the concentration of hydrophobic DOM containing aromatic carbon groups in leachate decreased with rising temperature. The humification degree of DOM decreased at 25 °C (99 mm/h), while the humification degree and protein-like level of DOM increased under high temperatures droughts (45 °C and 65 °C). Higher temperatures resulted in the leach of more microbial-derived humus and low molecular phenolic compounds from soil and broadened the range of molecular weight distribution. Increasing temperature increased DBPsFP and DBPs species and caused the precursors of haloacetic acids (HAAs) in leachate to become more hydrophobic, while the precursors of trihalomethanes (THMs) became more hydrophilic. Most importantly, the increased temperature attenuated the rainfall-mediated dilution of organic pollutant concentration, and temperature has a more significant effect than extreme rainfall in DOM abundance and the formation potential (or species) of DBPs. The results help to better understand the impact of climate change on the physicochemical processes of water quality.
RESUMEN
Solid-state batteries based on lithium metal anodes are expected to meet safety challenges while maintaining a high energy density. One major challenge lies in the fast interface degradation between the electrolyte and the lithium metal. Herein, we propose a quasi-3D interphase on a garnet solid-state electrolyte (SSE) by introducing lithiophilic nanotrenches. The nanotrenches created by the lithiophilic nanowire array can induce the superfilling of lithium metal into the nanotrenches, resulting in a low interfacial resistance (4 Ω cm2). Moreover, the embedded lithium metal anode optimizes the lithium deposition/stripping behavior not limited at the Li-SSE interface (â¼1-10 nm) but extended into the bulk lithium anode (â¼10 µm), realizing a high critical current density of 1.8-2.0 mA cm-2 at room temperature (RT). The embedded lithium metal anode is further applied in Li||LiFePO4 solid-state batteries, demonstrating a high reversible areal capacity of â¼3.0 mAh cm-2 at RT.
RESUMEN
The aqueous zinc-ion battery is promising as grid scale energy storage device, but hindered by the instable electrode/electrolyte interface. Herein, we report the lean-water ionic liquid electrolyte for aqueous zinc metal batteries. The lean-water ionic liquid electrolyte creates the hydrophobic tri-layer interface assembled by first two layers of hydrophobic OTF- and EMIM+ and third layer of loosely attached water, beyond the classical Gouy-Chapman-Stern theory based electrochemical double layer. By taking advantage of the hydrophobic tri-layer interface, the lean-water ionic liquid electrolyte enables a wide electrochemical working window (2.93â V) with relatively high zinc ion conductivity (17.3â mS/cm). Furthermore, the anion crowding interface facilitates the OTF- decomposition chemistry to create the mechanically graded solid electrolyte interface layer to simultaneously suppress the dendrite formation and maintain the mechanical stability. In this way, the lean-water based ionic liquid electrolyte realizes the ultralong cyclability of over 10000 cycles at 20â A/g and at practical condition of N/P ratio of 1.5, the cumulated areal capacity reach 1.8â Ah/cm2 , which outperforms the state-of-the-art zinc metal battery performance. Our work highlights the importance of the stable electrode/electrolyte interface stability, which would be practical for building high energy grid scale zinc-ion battery.
RESUMEN
N-nitrosodiethylamine (NDEA), which is the most toxic nitrosamine among the 9 detected species, has been widely detected in drinking water. Amines containing diethylamine (DEA) groups in the structure would generate NDEA during the disinfection processes. The aim of this study was to evaluate the feasibility of reducing NDEA formation from a commonly used dithiocarbamate pesticide sodium diethyldithiocarbamate (DEDTC) in subsequent chlorination and chloramination by pre-ozonation. The results demonstrated that NDEA could be generated directly during ozonation, its amounts increased from 0 to 14.34 µg/L with increasing ozone dosages (0-4 mg/L), which was higher than that chlorination (2.68 µg/L) and chloramination (4.91 µg/L) when the initial concentration of DEDTC was 20 µM. Pre-ozonation significantly raised NDEA formation from 2.68 to15.32 µg/L in subsequent chlorination; and that from 4.91 to 9.54 µg/L during subsequent chloramination processes. The addition of â¢OH scavenger tert-butanol (tBA) increased the production of NDEA from 8.14 to 20.80 µg/L during ozonation, and that from 6.76 to17.98 µg/L in O3/HClO process, 8.74 to 17.33 µg/L in O3/NH2Cl process. Except for NO3- and CO32-, most of the co-existing substances promoted NDEA generation from DEDTC under disinfection conditions. Based on the results of Gaussian theory calculations, GC/MS and UPLC-Q-TOFMS analysis, the influencing mechanisms of pre-ozonation on NDEA generation in the subsequent disinfection process were proposed. In addition, not only acute/chronic toxicity calculation but also luminescent bacteria test was performed to assess the possibility of pre-ozonation on the risk control of DEDTC. The research results fill a gap in the control of NDEA pollution and help to develop a safer ozone oxidation technology.
Asunto(s)
Ozono , Contaminantes Químicos del Agua , Purificación del Agua , Halogenación , Dietilnitrosamina , Estudios de Factibilidad , Desinfección/métodos , Ozono/análisis , Purificación del Agua/métodos , Contaminantes Químicos del Agua/análisisRESUMEN
TiO2 is a widely recognized intercalation anode material for lithium-ion batteries (LIBs), yet its practical capacity is kinetically constrained due to sluggish lithium-ion diffusion, leading to a lithiation number of less than 1.0 Li+ (336 mAh g-1). Here, the growth of TiO2 crystallites is restrained by integrating Si into the TiO2 framework, thereby enhancing the charge transfer and creating additional active sites potentially residing at grain boundaries for Li+ storage. This strategy is corroborated by the expanded redox range of Ti, as thoroughly demonstrated via synchrotron radiation-based X-ray spectroscopy and Cs-corrected electron microscopy. Consequently, when deployed for lithium storage, the tailored material achieves an extraordinarily high reversible capacity of 559 mAh g-1, 116% of the theoretical maximum of 483 mAh g-1 calculated based on all active species, while simultaneously retaining superior rate capability and robust cycling stability. This work offers fresh perspectives on the revitalization of traditional electrode materials to achieve enhanced capacities.
RESUMEN
Zinc metal batteries are strongly hindered by water corrosion, as solvated zinc ions would bring the active water molecules to the electrode/electrolyte interface constantly. Herein, we report a sacrificial solvation shell to repel active water molecules from the electrode/electrolyte interface and assist in forming a fluoride-rich, organic-inorganic gradient solid electrolyte interface (SEI) layer. The simultaneous sacrificial process of methanol and Zn(CF3SO3)2 results in the gradient SEI layer with an organic-rich surface (CH2OC- and C5 product) and an inorganic-rich (ZnF2) bottom, which combines the merits of fast ion diffusion and high flexibility. As a result, the methanol additive enables corrosion-free zinc stripping/plating on copper foils for 300 cycles with an average coulombic efficiency of 99.5%, a record high cumulative plating capacity of 10 A h/cm2 at 40 mA/cm2 in Zn/Zn symmetrical batteries. More importantly, at an ultralow N/P ratio of 2, the practical VO2//20 µm thick Zn plate full batteries with a high areal capacity of 4.7 mAh/cm2 stably operate for over 250 cycles, establishing their promising application for grid-scale energy storage devices. Furthermore, directly utilizing the 20 µm thick Zn for the commercial-level areal capacity (4.7 mAh/cm2) full zinc battery in our work would simplify the manufacturing process and boost the development of the commercial zinc battery for stationary storage.
RESUMEN
The slow reduction of Cu(II) into Cu(I) through peracetic acid (PAA) heavily limited the widespread application of Cu(II)/PAA system. Herein, hydroxylamine (HA) was proposed to boost the oxidative capacity of Cu(II)/PAA system by facilitating the redox cycle of Cu(I)/Cu(II). HA/Cu(II)/PAA system was quite rapid in the removal of diclofenac within a broad pH range of 4.5-9.5, with a 10-fold increase in the removal rate of diclofenac compared with the Cu(II)/PAA system at an optimal initial pH of 8.5. Results of UV-Vis spectra, electron paramagnetic resonance, and alcohol quenching experiments demonstrated that CH3C(O)Oâ¢, CH3C(O)OOâ¢, Cu(III), and â¢OH were involved in HA/Cu(II)/PAA system, while CH3C(O)OO⢠was verified as the predominant reactive species of diclofenac elimination. Different from previously reported Cu-catalyzed PAA processes, CH3C(O)OO⢠mainly generated from the reaction of PAA with Cu(III) rather than CH3C(O)O⢠and â¢OH. Four possible elimination pathways for diclofenac were proposed, and the acute toxicity of treated diclofenac solution with HA/Cu(II)/PAA system significantly decreased. Moreover, HA/Cu(II)/PAA system possessed a strong anti-interference ability towards the commonly existent water matrix. This research proposed an effective strategy to boost the oxidative capacity of Cu(II)/PAA system and might promote its potential application, especially in copper-contained wastewater.
RESUMEN
Thermally induced oxygen release is an intrinsic structural instability in layered cathodes, which causes thermal runaway issues and becomes increasingly critical with the continuous improvement in energy density. Furthermore, thermal runaway events always occur in electrochemically aged cathodes, where the coupling of the thermal and electrochemical effect remains elusive. Herein, we report the anomalous segregation of cobalt metal in an aged LiCoO2 cathode, which is attributed to the local exposure of the high-energy (100) surface of LiCoO2 and weak interface Co-O dangling bonds significantly promoting the diffusion of Co. The presence of the LCO-Co interface severely aggregated the oxygen release in the form of dramatic Co growth. A unique particle-to-particle oxygen release pathway was also found, starting from the isolated high reduction areas induced by the cycling heterogeneity. This study provides atomistic insight into the robust coupling between the intrinsic structural instability and electrochemical cycling.
RESUMEN
Catalysts with FeNC moieties have demonstrated remarkable activity toward oxygen reduction reaction (ORR), but precise synthesis and configuration regulation of FeNC to achieve bi-functional catalytic sites for ORR and oxygen evolution reaction (OER) remain a great challenge. Herein, a pomegranate-like catalyst with optimized FeN4 configuration is designed. The unique framework affords a large surface area for sufficient active site exposure and abundant macroporous channels for mass transport. By twisting chemical bonds, the electronic structure of FeN4 is regulated, and the adsorption/desorption of oxygen species is facilitated. Compared to noble metal-based catalysts (Pt/C+IrO2 ), the optimized FeNC exhibits impressive onset potential (0.96 V versus reversible hydrogen electrode), larger limiting current density (5.85 mA cm-2 ), and better long-term life for ORR, as well as, lower OER overpotential. When integrated into Zn-air batteries, it demonstrates a respectable peak power density (71.6 mW cm-2 ) and ideal cycling stability (30 h), exceeding that of commercial Pt/C+IrO2 . The exploration offers a guideline for designing advanced bi-functional electrocatalysts.
RESUMEN
This study was to evaluate the feasibility of controlling carcinogenic nitrosodiethylamine (NDEA) formation from greenhouse gas adsorbent 3-diethylaminopropylamine (DEAPA) by pre-O3 in subsequent chlorination/chloramination processes. The result indicated that the NDEA yields (0.4 %) during chlorination was 1.3 times of that during chloramination (0.3 %); pre-oxidation with 4 mg/L O3 significantly cut down its formation; the reduction rates were up to 67.5 and 48.5 %, respectively. OH scavenger greatly augmented the final NDEA amount from 1.86 to 5.05 µg/L during ozonation, while its roles on subsequent processes differed with disinfection methods as well as O3(g) dosages. Most of co-existed substances inhibited NDEA generation, except NO2-, CO32- and SO42-, which slightly promoted during ozonation. Basing on Gaussian calculation, GC/MS and UPLC-Q-TOF-MS analysis, the influencing mechanisms of pre-O3 on NDEA formation in subsequent disinfection processes were proposed. In addition, the calculated toxicity analysis as well as the whole toxicity was applied to evaluate the possibility of pre-O3 on risk control.
Asunto(s)
Gases de Efecto Invernadero , Ozono , Contaminantes Químicos del Agua , Purificación del Agua , Desinfección/métodos , Dietilnitrosamina , Carcinógenos/toxicidad , Halogenación , Purificación del Agua/métodos , Contaminantes Químicos del Agua/toxicidad , Contaminantes Químicos del Agua/análisisRESUMEN
To better satisfy the increasing demands for electric vehicles, it is crucial to develop fast-charging lithium-ion batteries (LIBs). However, the fast-charging capability of commercial graphite anodes is limited by the sluggish Li+ insertion kinetics. Herein, we report a synergistic engineering of uniform nano-sized T-Nb2 O5 particles on graphite (Gr@Nb2 O5 ) with C-O-Nb heterointerfaces, which prevents the growth and aggregation of T-Nb2 O5 nanoparticles. Through detailed theoretical calculations and pair distribution function analysis, the stable existence of the heterointerfaces is proved, which can accelerate the electron/ion transport. These heterointerfaces endow Gr@Nb2 O5 anodes with high ionic conductivity and excellent structural stability. Consequently, Gr@10-Nb2 O5 anode, where the mass ratio of T-Nb2 O5 /graphite=10/100, exhibits excellent cyclic stability and incredible rate capabilities, with 100.5â mAh g-1 after 10000 stable cycles at an ultrahigh rate of 20 C. In addition, the synergistic Li+ storage mechanism is revealed by systematic electrochemical characterizations and inâ situ X-ray diffraction. This work offers new insights to the reasonable design of fast-charging graphite-based anodes for the next generation of LIBs.
RESUMEN
As a vital freshwater resource, rainwater is usually stored in water cellars in arid regions to solve the daily drinking water problems of the population. However, the status of disinfection by-products (DBPs) generation in cellar water under intermittent disinfection conditions is unclear. Therefore, we investigated the formation and distribution characteristics of DBPs in cellar water under intermittent disinfection conditions for the first time. The results demonstrated that six categories of DBPs were selected for detection after chlorination, including trihalomethanes (THMs), haloacetic acids (HAAs), haloketones (HKs), haloacetonitriles (HANs), halonitromethanes (HNMs), and nitrosamines (NAs), among which HAAs, HKs, and HANs were the major DBPs. Only bromoacetic acid (MBAA), dichloroacetic acid (DCAA), and trichloroacetic acid (TCAA) showed an increasing trend of accumulation as the number of disinfections increased. Meanwhile, the precursor composition was gradually transformed from humic substances to amino acids, and both organic substances were the main precursors of HAAs. The health risk assessment showed that the main carcinogenic and non-carcinogenic risks of cellar water were contributed by NAs and HAAs, respectively, and children are more susceptible to the risks than adults. The best time to drink cellar water is after approximately 12 days of storage, when the total carcinogenic risk is the minimum.
Asunto(s)
Desinfectantes , Agua Potable , Contaminantes Químicos del Agua , Purificación del Agua , Niño , Humanos , Desinfección/métodos , Desinfectantes/análisis , Contaminantes Químicos del Agua/análisis , Agua Potable/análisis , Abastecimiento de Agua , Purificación del Agua/métodos , Halogenación , Trihalometanos/análisisRESUMEN
Increasing the upper cut-off voltage of LiCoO2 (LCO) is one of the most efficient strategies to gain high-energy density for current lithium-ion batteries. However, surface instability is expected to be exaggerated with increasing voltage arising from the high reactivity between the delithiated LCO and electrolytes, leading to serious safety concerns. This work is aimed to construct a physically and chemically stable phosphate-rich cathode-electrolyte interface (CEI) on the LCO particles to mitigate this issue. This phosphate-rich CEI is generated during the electrochemical activation by using fluoroethylene carbonate and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyletherare as the solvents. Both solvents also demonstrate high thermal stability, reducing the intrinsic flammability of the commercial organic electrolyte, thereby eliminating the safety concern in the LCO-based systems upon high-voltage operation. This stable CEI layer on the particle surface can also enhance the surface structure by blocking direct contact between LCO and electrolyte, improving the cycling stability. Therefore, by using the proposed electrolyte, the LCO cathode exhibits a high-capacity retention of 76.1% after 200 cycles at a high cut-off voltage of 4.6 V. This work provides a novel insight into the rational design of high-voltage and safe battery systems by adopting the flame-retardant electrolyte.