Theoretical Optimization of an Earth-Abundant and Environmentally Friendly Photovoltaic Absorber Cu3PSe4 from First-Principles Study to Device Simulation.

To seek an earth-abundant and environmentally friendly absorber for thin-film solar cells, Cu3PSe4 is investigated by first-principles calculations and device simulations. We demonstrate that the compound has a suitable band gap width of 1.3 eV as well as a high sunlight absorption coefficient. However, drawbacks like small electron affinity, high hole concentration, large lattice mismatch with CdS, etc., are revealed, which may degrade the photovoltaic performance. To address those shortcomings, we propose (1) to optimize the carrier concentration by preparing the samples at low temperature and under a Cu-rich environment, (2) to replace the CdS buffer layer by a more suitable wide-gap semiconductor with smaller lattice mismatch, and (3) that the selected buffer layer should have small electron affinity in order to reduce the open-circuit voltage losses. After implementation of these optimization approaches, the device simulations demonstrate that the power conversion efficiency reaches 17.7% for a solar cell with the configuration Mo/Cu3PSe4/WS2/n-ZnO. The combination of first-principles calculations at the atomistic level and device simulations at the macroscopic level provides an appropriate approach to design ideal solar cells.

Fe3O4 Nanoparticles Embedded into Pyridinic-N-Rich Carbon Nanohoneycomb with Strong dx2-Pz Orbital Hybridization for High-Performance Electromagnetic Wave Absorption.

Carbon-based magnetic nanocomposites as promising lightweight electromagnetic wave (EMW) absorbents are expected to address critical issues caused by electromagnetic pollution. Herein, Fe3O4 nanoparticles embedded into a 3D N-rich porous carbon nanohoneycomb (Fe3O4@NC) were developed via the pyrolysis of an in-situ-polymerized compound of m-phenylenediamine initiated by FeCl2 in the presence of NaCl crystals as templates. Results demonstrate that Fe3O4@NC features highly dispersed Fe3O4 nanoparticles into an ultrahigh specific pyridinic-N doping carbon matrix, resulting in excellent impedance matching characteristics and electromagnetic wave absorbing capability with the biggest effective absorption bandwidth (EAB) of up to 7.1 GHz and the minimum reflective loss (RLmin) of up to -65.5 dB in the thin thickness of 2.5 and 2.3 mm, respectively, which also outperforms the majority of carbon-based absorbers reported. Meanwhile, its high absorption performance is further demonstrated by an ethylene propylene diene monomer wave absorbing patch filled with 8.0 wt % Fe3O4@NC, which can completely shield a 5G signal in a mobile phone. In addition, theory calculation reveals that there is a strongest dx2-Pz orbital hybridization interaction between Fe3O4 clusters and pyridinic-N dopants in the carbon network, compared with other kinds of N dopants, which can not only generate more dipoles of carbon networks but also increase net magnetic moments of Fe3O4, thereby leading to a coupling effect of efficient dielectric and magnetic losses. This work provides new insights into the precise design and synthesis of carbon-based magnetic composites with specific interface interactions and morphological effects for high-efficiency EMW absorption materials.

Application and Prognostic Analysis of Vacuum Sealing Drainage in the Incision Infection in Patients With Stage II-III Colorectal Cancer.

INTRODUCTION: This study aims to explore the application value of vacuum sealing drainage (VSD) technology in the treatment of incision infection dehiscence after surgery in patients with stage II-III colorectal cancer and analyze its impact on prognosis. METHODS: This retrospective study included patients who experienced incision infection dehiscence after surgery for colorectal cancer between February 2014 and August 2019. Clinical and pathological data, short-term outcomes, and long-term outcomes were compared between the traditional group and the VSD group. RESULTS: A total of 97 patients were included in this study. There was no significant difference in clinical and pathological data between the traditional group and the VSD group (P > 0.05). The VSD group had fewer dressing changes, lower pain scores during dressing changes, and better granulation tissue growth grading than the traditional group, with statistical significance (P < 0.05). The VSD group started adjuvant chemotherapy earlier and had a higher proportion of ≥4 cycles of chemotherapy. The three-year overall survival rate in the VSD group was better than the traditional group, but the difference was not statistically significant (P > 0.05). CONCLUSION: The application of VSD technology can promote granulation tissue growth, accelerate incision healing, and facilitate patients to complete subsequent adjuvant chemotherapy. However, further verification of its long-term impact on prognosis requires longer-term follow-up results.

Pyroptosis-Related Genes as Diagnostic Markers in Chronic Obstructive Pulmonary Disease and Its Correlation with Immune Infiltration.

Background: Chronic obstructive pulmonary disease (COPD) stands as a predominant cause of global morbidity and mortality. This study aims to elucidate the relationship between pyroptosis-related genes (PRGs) and COPD diagnosis in the context of immune infiltration, ultimately proposing a PRG-based diagnostic model for predicting COPD outcomes. Methods: Clinical data and PRGs of COPD patients were sourced from the GEO database. The "ConsensusClusterPlus" package was employed to generate molecular subtypes derived from PRGs that were identified through differential expression analysis and LASSO Cox analysis. A diagnostic signature including eight genes (CASP4, CASP5, ELANE, GPX4, NLRP1, GSDME, NOD1and IL18) was also constructed. Immune cell infiltration calculated by the ESTIMATE score, Stroma scores and Immune scores were also compared on the basis of pyroptosis-related molecular subtypes and the risk signature. We finally used qRT - PCR to detect the expression levels of eight genes in COPD patient and normal. Results: The diagnostic model, anchored on eight PRGs, underwent validation with an independent experimental cohort. The area under the receiver operating characteristic (ROC) curves (AUC) for the diagnostic model showcased values of 0.809, 0.765, and 0.956 for the GSE76925, GSE8545, and GSE5058 datasets, respectively. Distinct expression patterns and clinical attributes of PRGs were observed between the comparative groups, with functional analysis underscoring a disparity in immune-related functions between them. Conclusion: In this study, we developed a potential as diagnostic biomarkers for COPD and have a significant role in modulating the immune response. Such insights pave the way for novel diagnostic and therapeutic strategies for COPD.

Synergistic Passivation on Buried Interface for Highly Efficient and Stable p-i-n Perovskite Solar Cells.

The properties of an interface at the hole transport layer (HTL)/perovskite layer are crucial for the performance and stability of perovskite solar cells (PVSCs), especially the buried interface between HTL and perovskite layer. Here, a molecular named potassium 1-trifluoroboratomethylpiperidine (3FPIP) assistant-modified perovskite bottom interface strategy is proposed to improve the charge transfer capability and balances energy level between HTL and perovskite. BF3 - in the 3FPIP molecule interacts with undercoordinated Pb2+ to passivate iodine vacancies and enhance PVSCs performance. Furthermore, the infiltration of K+ ions into perovskite molecules enhances the crystallinity and stability of perovskite. Therefore, the PVSCs with the buried interface treatment exhibit a champion performance of 24.6%. More importantly, the corresponding devices represent outstanding ambient stability, remaining at 92% of the initial efficiency after 1200 h. This work provides a new method of buried interface engineering with functional group synergy.

Deploying a Dipole Electric Field at the CsPbI3 Perovskite/Carbon Interface for Enhancing Hole Extraction and Photovoltaic Performance.

Carbon-based CsPbI3 perovskite solar cells without hole transporter (C-PSCs) have achieved intense attention due to its simple device structure and high chemical stability. However, the severe interface energy loss at the CsPbI3/carbon interface, attributed to the lower hole selectivity for inefficient charge separation, greatly limits device performance. Hence, dipole electric field (DEF) is deployed at the above interface to address the above issue by using a pole molecule, 4-trifluoromethyl-Phenylammonium iodide (CF3-PAI), in which the ─NH3 group anchors on the perovskite surface and the ─CF3 group extends away from it and connects with carbon electrode. The DEF is proven to align with the built-in electric field, that is pointing toward carbon electrode, which well enhances hole selectivity and charge separation at the interface. Besides, CF3-PAI molecules also serve as defect passivator for reducing trap state density, which further suppresses defect-induced non-radiative recombination. Consequently, the CsPbI3 C-PSCs achieve an excellent efficiency of 18.33% with a high VOC of 1.144 V for inorganic C-PSCs without hole transporter.

The joint effect of long-term exposure to multiple air pollutants on non-accidental and cause-specific mortality: A longitudinal cohort study.

The long-term joint impacts of fine particulate matter (PM2.5), nitrogen dioxide (NO2), and ozone (O3) on mortality are inconclusive. To bridge this research gap, we included 283,568 adults from the Taiwan MJ cohort between 2005 and 2016 and linked with the mortality data until 31 May 2019. Participants' annual average exposures to PM2.5, NO2, and O3 were estimated using satellite-based spatial-temporal models. We applied elastic net-regularised Cox models to construct a weighted environmental risk score (WERS) for the joint effects of three pollutants on non-accidental, cardiovascular, and cancer mortality and evaluated the contribution of each pollutant. The three pollutants jointly raised non-accidental mortality risk with a WERS hazard ratio (HR) of 1.186 (95% CI: 1.118-1.259) per standard deviation increase in each pollutant and weights of 72.8%, 15.2%, and 12.0% for PM2.5, NO2, and O3, respectively. The WERS increased cardiovascular death risk [HR: 1.248 (1.042-1.496)], with PM2.5 as the first contributor and O3 as the second. The WERS also elevated the cancer death risk [HR: 1.173 (1.083-1.270)], where PM2.5 played the dominant role and NO2 ranked second. Coordinated control of these three pollutants can optimise the health benefits of air quality improvements.

A regulation strategy of self-assembly molecules for achieving efficient inverted perovskite solar cells.

Self-assembled monolayers (SAMs) have been successfully employed to enhance the efficiency of inverted perovskite solar cells (PSCs) and perovskite/silicon tandem solar cells due to their facile low-temperature processing and superior device performance. Nevertheless, depositing uniform and dense SAMs with high surface coverage on metal oxide substrates remains a critical challenge. In this work, we propose a holistic strategy to construct composite hole transport layers (HTLs) by co-adsorbing mixed SAMs (MeO-2PACz and 2PACz) onto the surface of the H2O2-modified NiOx layer. The results demonstrate that the conductivity of the NiOx bulk phase is enhanced due to the H2O2 modification, thereby facilitating carrier transport. Furthermore, the hydroxyl-rich NiOx surface promotes uniform and dense adsorption of mixed SAM molecules while enhancing their anchoring stability. In addition, the energy level alignment at the interface is improved due to the utilization of mixed SAMs in an optimized ratio. Furthermore, the perovskite film crystal growth is facilitated by the uniform and dense composite HTLs. As a result, the power conversion efficiency of PSCs based on composite HTLs is boosted from 22.26% to 23.16%, along with enhanced operational stability. This work highlights the importance of designing and constructing NiOx/SAM composite HTLs as an effective strategy for enhancing both the performance and stability of inverted PSCs.

Lead-free Perovskite with Distorted [InX6]3- Octahedron Induced by Organic Cation and Enhanced PLQY by Sb Doping.

In-based halide perovskites have attracted a lot of attention because of their unique broadband emission properties. Herein, a series of In-based hybrid perovskites of (H2MP)2InCl7·H2O (1), (H2EP)2InCl7·H2O (2), (H2MP)2InBr7·H2O (3), and (H2EP)2InBr7·H2O (4) were synthesized under the control of halogen ions and organic cations. 1, 2, and 4 exhibit obvious photoluminescence properties with peaks at 392, 442, and 652 nm, respectively. The effects of the different components on the crystal structure and photoluminescence properties are discussed by calculating the structural distortion of the [InX6]3- octahedron. The photoluminescence properties of 1 and 4 were significantly improved after Sb3+ doping with PLQY values of 57.12 and 41.53%. Finally, a white LED was successfully fabricated with the two doped compounds coated onto the 365 nm blue LED chip.

Chronic exposure to ambient air pollution and the risk of non-alcoholic fatty liver disease: A cross-sectional study in Taiwan and Hong Kong.

BACKGROUND: Information on the relation of air pollution with non-alcoholic fatty liver disease (NAFLD) is scarce. We thus conducted a large cross-sectional study in Asia to investigate the role of air pollution in NAFLD. METHODS: We recruited 329,048 adults (mean age: 41.0 years) without other liver disease (hepatitis and cirrhosis) or excessive alcohol consumption in Taiwan and Hong Kong from 2001 to 2018. The concentrations of nitrogen dioxide (NO2) and ozone (O3) were estimated using a space-time regression model, and the concentrations of fine particulate matter (PM2.5) was evaluated using a satellite-based spatio-temporal model. NAFLD was determined using either the fatty liver index (FLI) or the hepatic steatosis index (HSI). The NAFLD-related advanced fibrosis was defined according to BARD score or the fibrosis-4 (FIB-4). A logistic regression model was adopted to explore the relationships of ambient air pollution with the odds of NAFLD and NAFLD-related advanced fibrosis. RESULTS: We found positive relationships between PM2.5 and the odds of NAFLD and advanced fibrosis, with every standard deviation (SD, 7.5 µg/m3) increases in PM2.5 exposure being associated with a 10% (95% confidence interval [CI]: 9%-11%) increment in the prevalence of NAFLD and an 8% (95% CI: 7%-9%) increment in the prevalence of advanced fibrosis. Similarly, the prevalence of NAFLD and advanced fibrosis increased by 8% (95% CI: 7%-9%) and 7% (95% CI: 6%-8%) with per SD (18.9 µg/m3) increasement in NO2 concentration, respectively. Additionally, for every SD (9.9 µg/m3) increasement in O3 concentration, the prevalence of NAFLD and advanced fibrosis decreased by 12% (95% CI: 11%-13%) and 11% (95% CI: 9%-12%), respectively. CONCLUSION: Higher ambient PM2.5 and NO2 are linked with higher odds of NAFLD and advanced fibrosis. Our findings indicate that reducing PM2.5 and NO2 concentrations may be an effective way for preventing NAFLD. Further studies on O3 are warranted.

Spatially selective defect management of CsPbI3 films for high-performance carbon-based inorganic perovskite solar cells.

Defects formed at the surface, buried interface and grain boundaries (GB) of CsPbI3 perovskite films considerably limit photovoltaic performance. Such defects could be passivated effectively by the most prevalent post modification strategy without compromising the photoelectric properties of perovskite films, but it is still a great challenge to make this strategy comprehensive to different defects spatially distributed throughout the films. Herein, a spatially selective defect management (SSDM) strategy is developed to roundly passivate various defects at different locations within the perovskite film by a facile one-step treatment procedure using a piperazine-1,4-diium tetrafluoroborate (PZD(BF4)2) solution. The small-size PZD2+ cations could penetrate into the film interior and even make it all the way to the buried interface of CsPbI3 perovskite films, while the BF4- anions, with largely different properties from I- anions, mainly anchor on the film surface. Consequently, virtually all the defects at the surface, buried interface and grain boundaries of CsPbI3 perovskite films are effectively healed, leading to significantly improved film quality, enhanced phase stability, optimized energy level alignment and promoted carrier transport. With these films, the fabricated CsPbI3 PSCs based on carbon electrode (C-PSCs) achieve an efficiency of 18.27%, which is among the highest-reported values for inorganic C-PSCs, and stability of 500 h at 85 °C with 65% efficiency maintenance.

Group-IIIA element doped BaSnS2 as a high efficiency absorber for intermediate band solar cell from a first-principles insight.

The quest for high-performance solar cell absorbers has garnered significant attention in the field of photovoltaic research in recent years. To overcome the Shockley-Queisser (SQ) limit of ∼31% for single junction solar cell and realize higher power conversion efficiency, the concept of an intermediate band solar cell (IBSC) has been proposed. This involves the incorporation of an intermediate band (IB) to assist the three band-edge absorptions within the single absorber layer. BaSnS2 has an appropriate width of its forbidden gap in order to host an IB. In this work, doping of BaSnS2 was studied based on hybrid functional calculations. The results demonstrated that isolated and half-filled IBs were generated with suitable energy states in the band gap region after group-IIIA element (i.e., Al, Ga, and In) doping at Sn site. The theoretical efficiencies under one sun illumination of 39.0%, 44.3%, and 39.7% were obtained for 25% doping concentration of Al, Ga, and In, respectively; thus, larger than the single-junction SQ-limit. Furthermore, the dopants have lower formation energies when substituting the Sn site compare to occupying the Ba and S sites, and that helps realizing a proper IB with three band-edge absorptions. Therefore, group-IIIA element doped BaSnS2 is proposed as a high-efficiency absorber for IBSC.

Comparison of extrafine beclomethasone dipropionate/formoterol fumarate dry powder inhaler and pressurized metered-dose inhaler in Chinese patients with asthma: the FORTUNE study.

OBJECTIVE: When selecting inhaled therapies, it is important to consider both the active molecules and the device. Extrafine formulation beclomethasone dipropionate plus formoterol fumarate (BDP/FF) has been available for some years delivered via pressurized metered-dose inhaler (pMDI). More recently, a breath-activated, multi-dose dry-powder inhaler (DPI), the NEXThaler, has been approved. The current study aimed to demonstrate the non-inferiority of BDP/FF delivered via the DPI vs. via the pMDI, in Chinese adults with asthma. METHODS: After a four-week run-in period, when all patients received BDP/FF pMDI 100/6 µg, two inhalations twice daily (BID), patients were randomized equally to BDP/FF pMDI or DPI, both 100/6 µg, two inhalations BID for 12 weeks. The primary objective was to demonstrate non-inferiority of BDP/FF DPI vs. BDP/FF pMDI in terms of average pre-dose morning peak expiratory flow (PEF) over the entire treatment period. RESULTS: Of 252 and 242 patients in the DPI and pMDI groups, respectively, 88.5% and 88.8% completed the study. The primary objective was met, with no statistically significant difference between the treatments in average pre-dose morning PEF, and with the lower limit of the 95% CI above the -15 L/min non-inferiority margin (adjusted mean difference: 5.25 L/min [95% CI: -0.56, 11.06]). Adverse events were reported by 48.4% and 49.6% patients in the DPI and pMDI groups, respectively, most mild or moderate. CONCLUSIONS: The NEXThaler DPI is a similarly effective device to the pMDI for the administration of BDP/FF in adults, so extending the options available for the management of asthma.

Effects of meteorological conditions on the mixing height of Nitrogen dioxide in China using new-generation geostationary satellite measurements and machine learning.

Nitrogen dioxide (NO2) plays a critical role in terms of air quality, human health, ecosystems, and its impact on climate change. While the crucial roles of the vertical structure of NO2 have been acknowledged for some time, there is currently limited knowledge about this aspect in China. The Geostationary Environment Monitoring Spectrometer (GEMS) is the world's first geostationary satellite instrument capable of measuring the hourly columnar amount of NO2. The study presented here introduces the use of mixing height for NO2 in the atmosphere. A thorough examination of spatiotemporal variations in the mixing height of NO2 was conducted using data from both the GEMS and ground-based air quality monitoring networks. A random forest model based on machine learning techniques was utilized to examine how meteorological parameters affect the mixing height of NO2. The results of our study reveal a notable seasonal fluctuation in the mixing height of NO2, with the highest values observed during the summer and the lowest values during the winter. Additionally, there was an increasing diurnal trend from early morning to mid-afternoon. Moreover, the study discovered elevated NO2 mixing heights in the dry regions of northern China. The results also indicated a positive correlation between the mixing height of NO2 and temperature and wind speed, while negative associations were found with relative humidity and air pressure. The machine learning model's predicted NO2 mixing heights were in good agreement with the measurement-based outcomes, as evidenced by a coefficient of determination (R2) value of 0.96 (0.84 for the 10-fold cross-validation). These findings emphasize the noteworthy influence of meteorological variables on the vertical distribution of NO2 in the atmosphere and enhance our comprehension of the three-dimensional variations in NO2.

Association of ambient PM2.5 concentration with tuberculosis reactivation diseases-an integrated spatio-temporal analysis.

Objectives: While the plausible role of ambient particulate matter (PM)2.5 exposure in tuberculosis (TB) reactivation has been inferred from in vitro experiments, epidemiologic evidence is lacking. We examined the relationship between ambient PM2.5 concentration and pulmonary TB (PTB) in an intermediate TB endemicity city dominated by reactivation diseases. Methods: Spatio-temporal analyses were performed on TB notification data and satellite-based annual mean PM2.5 concentration in Hong Kong. A total of 52,623 PTB cases from 2005-2018 were mapped to over 400 subdistrict units. PTB standardized notification ratio by population subgroups (elderly aged ≥65, middle-aged 50-64, and young adults aged 15-49) was calculated and correlated with ambient PM2.5 concentration. Results: Significant associations were detected between high ambient PM2.5 concentration and increased PTB among the elderly. Such associations were stable to the adjustment for socio-economic factors and other criteria pollutants. Unstable patterns of association between PM2.5 and PTB risk were observed in the middle-aged population and young adults, for which the observed associations were confounded by other criteria pollutants. Conclusion: With elderly PTB almost exclusively attributable to reactivation, our findings suggested that increased TB reactivations have occurred in association with high ambient PM2.5 exposure, lending support to preventive measures that minimize PM2.5-related TB reactivation.

Enabling High Activity Catalyst Co3O4@CeO2 for Propane Catalytic Oxidation via Inverse Loading.

Propane catalytic oxidation is an important industrial chemical process. However, poor activity is frequently observed for stable C-H bonds, especially for non-noble catalysts in low temperature. Herein, we reported a controlled synthesis of catalyst Co3O4@CeO2-IE via inverse loading and proposed a strategy of oxygen vacancy for its high catalytic oxidation activity, achieving better performance than traditional supported catalyst Co3O4/CeO2-IM, i.e., the T50 (temperature at 50% propane conversion) of 217 °C vs. 235 °C and T90 (temperature at 90% propane conversion) of 268 °C vs. 348 °C at the propane space velocity of 60,000 mL g-1 h-1. Further investigations indicate that there are more enriched oxygen vacancies in Co3O4@CeO2-IE due to the unique preparation method. This work provides an element doping strategy to effectively boost the propane catalytic oxidation performance as well as a bright outlook for efficient environmental catalysts.

Comprehensive Analysis of the Expression, Prognostic Value, and Immune Infiltration Activities of GABRD in Colon Adenocarcinoma.

Colon adenocarcinoma (COAD) is one of the tumors with the highest mortality rates. It is of the utmost significance to make an accurate prognostic assessment and to tailor one's treatment to the specific needs of the patient. Multiple lines of evidence point to the possibility that genetic variables and clinicopathological traits are connected to the onset and development of cancer. In the past, a number of studies have revealed that gamma-aminobutyric acid type A receptor subunit delta (GABRD) plays a role in the advancement of a number of different cancers. However, its function in COAD was rarely reported. In this study, we analyzed TCGA datasets and identified 29 survival-related differentially expressed genes (DEGs) in COAD patients. In particular, GABRD expression was noticeably elevated in COAD specimens. There was a correlation between high GABRD expression and an advanced clinical stage. According to the results of the survival tests, patients whose GABRD expression was high had a lower overall survival time and progression-free survival time than those whose GABRD expression was low. GABRD expression was found to be an independent predictive predictor for overall survival, as determined by multivariate COX regression analysis. Additionally, the predictive nomogram model can accurately predict the fate of individuals with COAD. In addition, we observed that GABRD expressions were positively associated with the expression of T cells regulatory (Tregs), macrophages M0, while negatively associated with the expression of T cells CD8, T cells follicular helper, macrophages M1, dendritic cells activated, eosinophils, and T cells CD4 memory activated. The IC50 of BI-2536, bleomycin, embelin, FR-180204, GW843682X, LY317615, NSC-207895, rTRAIL, and VX-11e was higher in the GABRD high-expression group. In conclusion, we have shown evidence that GABRD is a novel biomarker that is connected with immune cell infiltration in COAD and may be utilized to predict the prognosis of COAD patients.

Store-operated calcium entry enhances the polarization and chemotaxis of neutrophils in the peripheral venous blood of patients with bronchial asthma by upregulating ERM protein.

Background: Neutrophils can be rapidly recruited and are largely abundant in the airways of patients with asthma. However, whether the polarization and chemotaxis of neutrophils in patients with asthma are abnormal, and the underlying mechanisms, have not been clarified. Pseudopods formation is the initial step of neutrophils' polarization, ezrin, radixin and moesin (ERM) play an important role in the polarization of neutrophils. As an important signaling molecule in cell physiological processes, Ca2+ has been shown to be involved in the polarity changes of neutrophils. This study thus aimed to explore polarization and chemotaxis of neutrophils in patients with asthma and the underlying mechanism. Methods: Fresh neutrophils were isolated using standard separation protocols. The polarization and chemotactic activity of neutrophils were observed using Zigmond chamber and Transwell migration assay under linear concentration gradients of N-formyl-methionine-leucine-phenylalanine (fMLP) or interleukin (IL)-8. The distribution of calcium, ERMs and F-actin in neutrophils were observed by confocal laser scanning microscope. The expression of the main components of ERMs (moesin and ezrin) was detected with reverse transcription-polymerase chain reaction (RT-PCR). Results: Compared with those in the healthy control group, the polarization and chemotaxis of neutrophils in the venous blood of patients with asthma were significantly increased, and the expression and distribution of cytoskeletal proteins F-actin and ezrin were abnormal. The expression and function of key components of store-operated calcium entry (SOCE), stromal interaction molecule 1 (STIM1), STIM2, and Orai1 of neutrophils in patients with asthma were significantly increased. Conclusions: The polarization and chemotaxis of neutrophils in the venous blood of patients with asthma are increased. This may be due to the abnormal expression and distribution of ERM and F-actin as a result of abnormal SOCE function.

Preparation, characterization, and antibacterial effect of bio-based modified starch films.

There are several problems with common starch films, including strong water absorption and poor mechanical properties. To create a better starch film, octenyl succinate cassava starch ester (OSCS) was first blended with chitosan and nano ZnO to prepare an OSCS/CS/ZnO film. Then, the film was supplemented with different concentrations of ε-PL as a bacteriostatic agent to prepare a film that would resist bacterial invasion. The mechanical properties, barrier properties, optical properties, and color of the modified starch antibacterial films were investigated, and finally the antibacterial properties and cytotoxicity were tested. The results demonstrated that the modified starch antibacterial film had good mechanical properties, improved surface hydrophobicity, and had a UV-blocking effect. The modified starch antibacterial film with ε-PL of 8% had stable and long-lasting antibacterial properties, stable release, and good cytocompatibility. An active packaging material was successfully prepared using ε-PL and had a strong preservative effect on food.

Chronic exposure to ambient PM2.5/NO2 and respiratory health in school children: A prospective cohort study in Hong Kong.

Despite increasing concerns about the detrimental effects of air pollution on respiratory health, limited evidence is available on these effects in the Hong Kong population, especially in children. In this prospective cohort study between 2012 and 2017, we aimed to investigate the associations between exposure to air pollution (concentrations of fine particulate matter [PM2.5] and nitrogen dioxide [NO2]) and respiratory health (lung function parameters and respiratory diseases and symptoms) in schoolchildren. We recruited 5612 schoolchildren aged 6-16 years in Hong Kong. We estimated the annual average concentrations of ambient PM2.5 and NO2 at each participant's address using spatiotemporal models. We conducted spirometry tests on all participants to measure their lung function parameters and used a self-administered questionnaire to collect information on their respiratory diseases and symptoms and a wide range of covariates. Linear mixed models were used to investigate the associations between exposure to air pollution and lung function. Mixed-effects logistic regression models with random effects were used to investigate the associations of exposure to air pollution with respiratory diseases and symptoms. In all of the participants, every 5-µg/m3 increase in the ambient PM2.5 concentration was associated with changes of - 13.90 ml (95 % confidence interval [CI]: -23.65 ml, -4.10 ml), - 4.20 ml (-15.60 ml, 7.15 ml), 27.20 ml/s (-3.95 ml/s, 58.35 ml/s), and - 19.80 ml/s (-38.35 ml/s, -1.25 ml/s) in forced expiratory volume in 1 s, forced vital capacity, peak expiratory flow, and maximal mid-expiratory flow, respectively. The corresponding lung function estimates for every 5-µg/m3 increase in the ambient NO2 concentration were - 2.70 ml (-6.05 ml, 0.60 ml), - 1.40 ml (-5.40 ml, 2.60 ml), - 6.60 ml/s (-19.75 ml/s, 6.55 ml/s), and - 3.05 ml/s (-11.10 ml/s, 5.00 ml/s), respectively. We did not observe significant associations between PM2.5/NO2 exposure and most respiratory diseases and symptoms. Stratified analyses by sex and age showed that the associations between exposure to air pollution and lung function parameters were stronger in male participants and older participants (11-14 year old group) than in female participants and younger participants (6-10 year old group), respectively. Our results suggest that chronic exposure to air pollution is detrimental to the respiratory health of schoolchildren, especially that of older boys. Our findings reinforce the importance of air pollution mitigation to protect schoolchildren's respiratory health.