Reticular chemistry guided single-linker constructed pillar-layered metal-organic frameworks via an in situ "one-pot" strategy.

In the present work, we report a "two-in-one" strategy to construct single-linker-based pillar-layered metal-organic frameworks (PL-MOFs) guided by reticular chemistry via an in situ "one-pot" approach. Two carboxyl groups and one pyridine group are integrated into one molecular skeleton to form bifunctional organic linkers via the reaction of pyridine-containing aldehyde and bicarboxylate-containing o-phenylenediamine. During the synthesis of organic linkers, two zinc-based PL-MOFs, non-interpenetrated HIAM-3016-op and two-fold interpenetrated HIAM-3017-op, can be simultaneously constructed. The different interpenetrations for these two PL-MOFs can be attributed to the increased length of the pyridine-containing moiety. HIAM-3017-op can be utilized for Cr2O72- detection with excellent sensitivity and selectivity. The present work not only provides a novel insight to design and prepare PL-MOFs with specific structures guided by reticular chemistry, but also indicates the universality of the in situ "one-pot" strategy to construct porous materials.

Reticular Chemistry Directed "One-Pot" Strategy to in situ Construct Organic Linkers and Zirconium-Organic Frameworks.

Zirconium-based metal-organic frameworks (Zr-MOFs) have emerged as one of the most studied MOFs due to the unlimited numbers of organic linkers and the varying Zr-oxo clusters. However, the synthesis of carboxylic acids, especially multitopic carboxylic acids, is always a great challenge for the discovery of new Zr-MOFs. As an alternative approach, the in situ "one-pot" strategy can address this limitation, where the generation of organic linkers from the corresponding precursors and the sequential construction of MOFs are integrated into one solvothermal condition. Herein, inspired by benzimidazole-contained compounds synthesized via reaction of aldehyde and o-phenylenediamine, tri-, tetra-, penta- and hexa-topic carboxylic acids and a series of corresponding Zr-MOFs can be prepared via the in situ "one-pot" method under the same solvothermal conditions. This strategy can be utilized not only to prepare reported Zr-MOFs constructed using benzimidazole-contained linkers, but also to rationally design, construct and realize functionalities of zirconium-pentacarboxylate frameworks guided by reticular chemistry. More importantly, in situ "one-pot" method can facilitate the discovery of new Zr-MOFs, such as zirconium-hexacarboxylate frameworks. The present study demonstrates the promising potential of benzimidazole-inspired in situ "one-pot" approach in the crystal engineering of structure- and property-specific Zr-MOFs, especially with the guidance of reticular chemistry.

Facile Tailoring of Metal-Organic Frameworks for Förster Resonance Energy Transfer-Driven Enhancement in Perovskite Photovoltaics.

Förster resonance energy transfer (FRET) has demonstrated its potential to enhance the light energy utilization ratio of perovskite solar cells by interacting with metal-organic frameworks (MOFs) and perovskite layers. However, comprehensive investigations into how MOF design and synthesis impact FRET in perovskite systems are scarce. In this work, nanoscale HIAM-type Zr-MOF (HIAM-4023, HIAM-4024, and HIAM-4025) is meticulously tailored to evaluate FRET's existence and its influence on the perovskite photoactive layer. Through precise adjustments of amino groups and acceptor units in the organic linker, HIAM-MOFs are synthesized with the same topology, but distinct photoluminescence (PL) emission properties. Significant FRET is observed between HIAM-4023/HIAM-4024 and the perovskite, confirmed by spectral overlap, fluorescence lifetime decay, and calculated distances between HIAM-4023/HIAM-4024 and the perovskite. Conversely, the spectral overlap between the PL emission of HIAM-4025 and the perovskite's absorption spectrum is relatively minimal, impeding the energy transfer from HIAM-4025 to the perovskite. Therefore, the HIAM-4023/HIAM-4024-assisted perovskite devices exhibit enhanced EQE via FRET processes, whereas the HIAM-4025 demonstrates comparable EQE to the pristine. Ultimately, the HIAM-4023-assisted perovskite device achieves an enhanced power conversion efficiency (PCE) of 24.22% compared with pristine devices (PCE of 22.06%) and remarkable long-term stability under ambient conditions and continuous light illumination.

Reticular chemistry guided precise construction of zirconium-pentacarboxylate frameworks with 5-connected Zr6 clusters.

Zirconium-based metal-organic frameworks (Zr-MOFs) have been extensively studied due to their very rich structural chemistry. The combination of nearly unlimited carboxylic acid-based linkers and Zr6 clusters with multiple connectivities has led to diverse structures and specific properties of resultant Zr-MOFs. Herein, we demonstrate the successful use of reticular chemistry to construct two novel Zr-MOFs, HIAM-4040 and HIAM-4040-OH, with zfu topology. Based on a thorough structural analysis of (4,4)-connected lvt-type Zr-tetracarboxylate frameworks and a judicious linker design, we have obtained the first example of a Zr-pentacarboxylate framework featuring unprecedented 5-connected organic linkers and 5-connected Zr6 clusters. Compared with HIAM-4040, a larger Stokes shift is achieved in HIAM-4040-OH via hydroxyl group induced excited-state intramolecular proton transfer (ESIPT). HIAM-4040-OH exhibits high chemical and thermal stability and is used for HClO detection in aqueous solution with excellent sensitivity and selectivity.

Carboxyl position-directed structure diversity in zirconium-tricarboxylate frameworks.

Herein, three tritopic carboxylic acids were used to construct three Zr-MOFs, HIAM-4033, HIAM-4034, and HIAM-4035, to investigate the effect of carboxyl position on the MOF structures. The results showed that HIAM-4033 and HIAM-4034 possess (3,9)-c models with different underlying nets, whereas HIAM-4035 exhibits the same underlying net as UiO-68. Nanosized HIAM-4033 exhibits excellent sensitivity and selectivity for detecting aromatic acids, such as benzoic acid and 2-fluorobenzoic acid, compared with aliphatic acids and inorganic acids. This study offers new insights into achieving an organic linker directed structure evolution of Zr-MOFs, which might facilitate the discovery of unprecedented underlying nets.

Linker engineering toward near-infrared-I emissive metal-organic frameworks for amine detection.

Herein, organic linker-based near-infrared-I (NIR-I) emissive metal-organic frameworks (MOFs), with a maximum emission peak at 741 nm, were synthesized via linker engineering. By integration of stronger acceptor and donor groups into one linker, a significant bathochromic-shift is realized. This MOF exhibits great selectivity and sensitivity for aniline and p-phenylenediamine detection. This finding provides new insights into the rational design of NIR-MOFs for sensing and related applications.

Size- and Emission-Controlled Synthesis of Full-Color Luminescent Metal-Organic Frameworks for Tryptophan Detection.

The development of nanoscaled luminescent metal-organic frameworks (nano-LMOFs) with organic linker-based emission to explore their applications in sensing, bioimaging and photocatalysis is of great interest as material size and emission wavelength both have remarkable influence on their performances. However, there is lack of platforms that can systematically tune the emission and size of nano-LMOFs with customized linker design. Herein two series of fcu- and csq-type nano-LMOFs, with precise size control in a broad range and emission colors from blue to near-infrared, were prepared using 2,1,3-benzothiadiazole and its derivative based ditopic- and tetratopic carboxylic acids as the emission sources. The modification of tetratopic carboxylic acids using OH and NH2 as the substituent groups not only induces significant emission bathochromic shift of the resultant MOFs, but also endows interesting features for their potential applications. As one example, we show that the non-substituted and NH2 -substituted nano-LMOFs exhibit turn-off and turn-on responses for highly selective and sensitive detection of tryptophan over other nineteen natural amino acids. This work sheds light on the rational construction of nano-LMOFs with specific emission behaviours and sizes, which will undoubtedly facilitate their applications in related areas.

Tuning and Directing Energy Transfer from the Blue to Near-Infrared Range in Multicomponent Metal-Organic Frameworks with seh Topology.

Luminescent metal-organic frameworks (MOFs) are emerging as one of several promising materials to study light-harvesting and energy-transfer processes. However, it is still a big challenge to tune and direct energy transfer in luminescent MOFs-based light-harvesting system. Herein, a series of new light-harvesting zinc-based luminescent MOFs with seh underlying topology were reported by successfully integrating 2,1,3-benzothiadiazole and its derivative-based carboxylic acids and pyridine-contained linkers into one structure. The strong spectra overlap between the emission and absorption spectra of carboxylic acids and pyridine-type linkers afforded an ideal platform to realize efficient energy transfer from the blue to near-infrared range. This work provides a novel approach to the rational design and synthesis of MOFs-based multicomponent light-harvesting materials with tunable energy transfer to mimic natural photosynthetic processes.

Reticular Chemistry with Art: A Case Study of Olympic Rings-Inspired Metal-Organic Frameworks.

Herein, we demonstrate the successful utilization of reticular chemistry as an excellent designing strategy for the deliberate construction of a zirconium-tetracarboxylate metal-organic framework (MOF) inspired by the Olympic rings. HIAM-4017, with an unprecedented (4,8)-c underlying net topology termed jcs, was developed via insightful reconstruction of the rings and judicious design of a nonsymmetric organic linker. HIAM-4017 exhibits high porosity and excellent chemical and thermal stability. Furthermore, excited-state intramolecular proton transfer (ESIPT) was achieved in an isoreticular MOF, HIAM-4018, with a large Stokes shift of 155 nm as a result of introducing the hydroxyl group to the linker skeleton to induce OH···N interactions. Such interactions were analyzed thoroughly by employing the time-dependent density functional theory (TD-DFT). Because of their good thermal and chemical stability, and strong luminescence, nanosized HIAM-4017 and HIAM-4018 were fabricated and used for Cr2O72- detection. Both MOFs demonstrate excellent sensitivity and selectivity. This work represents a neat example of building structure- and property-specific MOFs guided by reticular chemistry.

A Zirconium-Organic Framework Constructed from Saddle-Shaped Tetratopic Carboxylate for High-Rate and -Efficiency Iodine Capture.

Metal-organic frameworks (MOFs) exhibit strong potential for applications in molecular adsorption and separation because of their highly tunable structures and large specific surface areas and have also been used for iodine capture. However, most works on MOF-based iodine capture focus on the adsorption capacity while taking little consideration of the capture rate and efficiency. Herein, we report the design of a saddle-shaped tetratopic carboxylic acid containing four thiophene groups (H4COTTBA) and the synthesis of a 4,8-connected flu-type zirconium MOF (HIAM-4014) using this linker. HIAM-4014 exhibits highly efficient iodine capture. The large cagelike pore structure, OH- groups on the unsaturated Zr6 clusters, electron-rich nature of the thiophene group in the linker, and high surface area are all attributed to the tetrahedral geometry of H4COTTBA, which endows HIAM-4014 with a relatively high iodine adsorption capacity of 2.50 g/g within 2 h and an equilibrium adsorption capacity of 2.68 g/g after 5 h. Coupled with a high elution ratio and great recyclability, HIAM-4014 is a good candidate for the efficient removal of waste iodine.

Amino group induced structural diversity and near-infrared emission of yttrium-tetracarboxylate frameworks.

Near-infrared (NIR)-emitting materials have been extensively studied due to their important applications in biosensing and bioimaging. Luminescent metal-organic frameworks (LMOFs) are a new class of highly emissive materials with strong potential for utilization in biomedical related fields because of their nearly unlimited structural and compositional tunability. However, very little work has been reported on organic linker-based NIR-MOFs and their emission properties. In the present work, a series of yttrium-tetracarboxylate-based LMOFs (HIAM-390X) are prepared via judicious linker design to achieve NIR emission with diverse structures. The introduction of an amino group not only offers the remarkable emission bathochromic shift from 521 nm, 665 nm to 689 nm for the resultant MOFs, but also influences the linker conformations, leading to the topology evolution from (4,12)-c ftw, (4,8)-c scu, which is rarely reported in rare earth element-based MOFs, to an unprecedented topology hlx for HIAM-3901 (without an amino group), HIAM-3905 (with one amino group) and HIAM-3906 (with two amino groups). Among these MOFs, HIAM-3907 shows an emission maximum at ∼790 nm, with the emission tail close to 1000 nm. The NIR emission may be attributed to the combination of the strongly electron-donating amino group and the strongly electron-withdrawing acceptor naphtho[2,3-c][1,2,5]selenadiazole. This work sheds light on the rational design of organic linker-based LMOFs with controlled structures and NIR emission, and inspires future interest in biosensing and bioimaging related applications of NIR-MOFs.

Building an emission library of donor-acceptor-donor type linker-based luminescent metal-organic frameworks.

Luminescent metal-organic frameworks (LMOFs) have been extensively studied for their potential applications in lighting, sensing and biomedicine-related areas due to their high porosity, unlimited structure and composition tunability. However, methodical development in systematically tuning the emission properties of fluorescent organic linker-based LMOFs to facilitate the rational design and synthesis of target-specific materials has remained challenging. Herein we attempt to build an emission library by customized synthesis of LMOFs with targeted absorption and emission properties using donor-acceptor-donor type organic linkers. By tuning the acceptor groups (i.e. 2,1,3-benzothiadiazole and its derivatives), donor groups (including modification of original donors and use of donors with different metal-linker connections) and bridging units between acceptor and donor groups, an emission library is developed for LMOFs with their emissions covering the entire visible light range as well as the near-infrared region. This work may offer insight into well controlled design of organic linkers for the synthesis of LMOFs with specified functionality.

Comprehensive metabolomics analysis of key taste components in different varieties of table grapes.

Grapes are one of the world's largest fruit crops, which are rich in nutrients and taste. Summer Black, Gui Fei, Kyoho Grape, Giant Rose, Shine Muscat, and Rosario Bianco are the six most popular table grapes in Wuxi city, Jiangsu province. Owing to the lack of comprehensive investigations of metabolites in table grapes, the metabolic causes of differences in their taste are unknown. In this study, metabolites of six table grapes were profiled using ultra-high-performance liquid chromatography-Q-Exactive Orbitrap tandem mass spectrometry combined with multivariate analysis. Orthogonal partial least squares discriminant analysis discriminated among the metabolites of these varieties. Metabolic pathway analysis revealed that carbohydrate and amino acid metabolisms were highly conserved among these varieties. Our results suggest that the taste differences in the six table grape varieties can be explained by variations in composition and abundance of carbohydrates, organic acids, amino acids, and polyphenols. This study provides comprehensive insights into the underlying metabolic causes of taste variation in table grapes.

Research Progress of Chinese Herbal Medicine Intervention in Renal Interstitial Fibrosis.

Chronic kidney diseases usually cause renal interstitial fibrosis, the prevention, delay, and treatment of which is a global research hotspot. However, no definite treatment options are available in modern medicine. Chinese herbal medicine has a long history, rich varieties, and accurate treatment effects. Hitherto, many Chinese herbal medicine studies have emerged to improve renal interstitial fibrosis. This paper reviews the mechanisms of renal interstitial fibrosis and recent studies on the disease intervention with Chinese herbal medicine through literature search, intend to reveal the importance of Chinese herbal medicine in renal interstitial fibrosis. The results show that Chinese herbal medicine can improve renal interstitial fibrosis, and the effects of Chinese herbal medicine on specific pathological mechanisms underlying renal interstitial fibrosis have been explored. Additionally, the limitations and advantages of Chinese herbal medicine in the treatment of renal interstitial fibrosis, possible research directions, and new targets of Chinese herbal medicine are discussed to provide a basis for studies of renal interstitial fibrosis.

Customized Synthesis: Solvent- and Acid-Assisted Topology Evolution in Zirconium-Tetracarboxylate Frameworks.

Metal-organic frameworks (MOFs) demonstrate strong potential for various important applications due to their well tunable structures and compositions through metal and organic linker engineering. As an effective approach, topology evolution by controlling linker conformation has received considerable attention, where solvents and acids have crucial effects on structural formation. However, a systematic study of such effects remains under investigated. Herein, we carried out a methodical study on the topology evolution in Zr-MOFs directed by solvothermal conditions with various combinations of three common solvents and six different acids. As a result, three Zr-MOFs with different topologies, scu (HIAM-4007), scp (HIAM-4008), and csq (HIAM-4009), were obtained using the same Zr6-cluster and tetratopic carboxylate linker, in which structure diversity shows significant influence on their corresponding photoluminescence quantum yields. Further experiments revealed that the acidity of acids and the basicity of solvents strongly influenced the linker conformation in the resultant MOFs, leading to the topology evolution. Such a solvent- and acid-assisted topology evolution represents a general approach that can be used with other tetratopic carboxylate linkers to realize structural diversity. The present work demonstrates an effective structure designing strategy by controlling synthetic conditions, which may prove to be powerful for customized synthesis of MOFs with specific structure and functionality.

Hierarchically encapsulating enzymes with multi-shelled metal-organic frameworks for tandem biocatalytic reactions.

Biocatalytic transformations in living organisms, such as multi-enzyme catalytic cascades, proceed in different cellular membrane-compartmentalized organelles with high efficiency. Nevertheless, it remains challenging to mimicking biocatalytic cascade processes in natural systems. Herein, we demonstrate that multi-shelled metal-organic frameworks (MOFs) can be used as a hierarchical scaffold to spatially organize enzymes on nanoscale to enhance cascade catalytic efficiency. Encapsulating multi-enzymes with multi-shelled MOFs by epitaxial shell-by-shell overgrowth leads to 5.8~13.5-fold enhancements in catalytic efficiencies compared with free enzymes in solution. Importantly, multi-shelled MOFs can act as a multi-spatial-compartmental nanoreactor that allows physically compartmentalize multiple enzymes in a single MOF nanoparticle for operating incompatible tandem biocatalytic reaction in one pot. Additionally, we use nanoscale Fourier transform infrared (nano-FTIR) spectroscopy to resolve nanoscale heterogeneity of vibrational activity associated to enzymes encapsulated in multi-shelled MOFs. Furthermore, multi-shelled MOFs enable facile control of multi-enzyme positions according to specific tandem reaction routes, in which close positioning of enzyme-1-loaded and enzyme-2-loaded shells along the inner-to-outer shells could effectively facilitate mass transportation to promote efficient tandem biocatalytic reaction. This work is anticipated to shed new light on designing efficient multi-enzyme catalytic cascades to encourage applications in many chemical and pharmaceutical industrial processes.

A Microporous Metal-Organic Framework Incorporating Both Primary and Secondary Building Units for Splitting Alkane Isomers.

We demonstrate the assembly of a mononuclear metal center, a hexanuclear cluster, and a V-shaped, trapezoidal tetracarboxylate linker into a microporous metal-organic framework featuring an unprecedented 3-nodal (4,4,8)-c lyu topology. The compound, HIAM-302, represents the first example that incorporates both a primary building unit and a hexanuclear secondary building unit in one structure, which should be attributed to the desymmetrized geometry of the organic linker. HIAM-302 possesses optimal pore dimensions and can separate monobranched and dibranched alkanes through selective molecular sieving, which is of significant value in the petrochemical industry.

The Reliability of Measuring Early Brain Edema with Computed Tomography.

BACKGROUND: Postoperative brain edema is a common complication in patients with high-grade glioma after craniotomy. Both Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) are applied to diagnose brain edema. Usually, MRI is considered to be better than CT for identifying brain edema. However, MRI is not generally applied in diagnosing acute cerebral edema in the early postoperative stage. Whether CT is reliable in detecting postoperative brain edema in the early stage is unknown. OBJECTIVE: This study aimed at investigating the agreement and correlation between CT and MRI for measuring early postoperative brain edema. METHODS: Patients with high-grade glioma who underwent craniotomy in the Beijing Tiantan hospital from January 2017 to October 2018 were retrospectively analyzed. The region of interest and operative cavity were manually outlined, and the volume of postoperative brain edema was measured on CT and MRI. Pearson correlation testing and the Intraclass Correlation Coefficient (ICC) were used to evaluate the association and agreement between CT and MRI for detecting the volume of postoperative brain edema. RESULTS: Twenty patients were included in this study. The interrater agreement was perfect for detecting brain edema (CT: κ=1, ICC=0.977, P<0.001; MRI: κ=0.866, ICC=0.963, P<0.001). A significant positive correlation and excellent consistency between CT and MRI were found for measuring the volume of brain edema (rater 1: r=0.97, ICC=0.934, P<0.001; rater 2: r=0.97, ICC=0.957, P<0.001). CONCLUSION: Substantial comparability between CT and MRI is demonstrated for detecting postoperative brain edema. It is reliable to use CT for measuring brain edema volume in the early stage after surgery.

Full-Color Emission in Multicomponent Metal-Organic Frameworks via Linker Installation.

Herein, we demonstrate that linker installation (LI) through postsynthesis is an effective strategy to insert emissive second linkers into single-linker-based metal-organic frameworks (MOFs) to tune the emission properties of multicomponent MOFs. Full-color emission, including white-light emission, can be achieved via such a LI process.

Network Pharmacology-Based Identification of Key Mechanisms of Xihuang Pill in the Treatment of Triple-Negative Breast Cancer Stem Cells.

Xihuang pill, an approved Chinese medicine formula (state medical permit number. Z11020073), is a commonly used adjuvant drug for cancer patients in China. Xihuang pill has a satisfactory effect in treating breast cancer in clinics, especially triple-negative breast cancer (TNBC), which is the most aggressive type of breast cancer, and finite effective therapies. However, the mechanism of Xihuang pill in treating TNBC remains unclear. The present study aims to explore the pharmacological mechanism of Xihuang pill in treating advanced TNBC. We identified the main chemical components of Xihuang pill by using HPLC-Q-TOF-MS/MS. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) analysis shows that serum containing Xihuang pill (XS) had no obvious killing effect on any subtype of breast cancer cells, but it inhibited mammosphere colony formation of two TNBC cell lines (4T1 and HCC1806 cells) and could enhance the inhibitory effect of paclitaxel (PTX) on the proliferation of 4T1 and HCC1806 cells when combined with PTX. Seventy-six active compounds in Xihuang pill, their 300 protein targets, and 16667 TNBC stem cell-related genes were identified. The drug-herb-active compound-target gene-disease network and enrichment analyses were constructed with 190 overlapping candidate targets. Through text mining and molecular docking, the target gene NR3C2 and its active compound naringenin were selected for further validation. According to the TCGA database, we observed that a high expression of NR3C2 promoted a higher survival probability regarding overall survival (OS). In vitro experiments indicated that naringenin presented an identical effect to XS, possibly by regulating the NR3C2 expression. Overall, this study explored the effect of Xihuang pill in treating advanced TNBC cells and showed that naringenin, which is the key active compound of Xihuang pill, could lessen the stemness of TNBC cells to produce a synergistic effect on PTX by regulating the NR3C2 gene.