RESUMEN
This study examined teacher behaviours, students' academic engagement, and classroom ecology in mainstream classrooms including children with intellectual disabilities, and examined the differences in academic engagement for students with and without intellectual disabilities. A mixed-method research methodology was employed. The study demonstrated that children with intellectual disabilities exhibited high level of engagement in the following situations: the classroom layout used grouping, the classroom organisation combined groups and independent learning, the learning tasks included reading aloud, copying, watching videos, and doing homework, and teachers paid attention to all students or to children with intellectual disabilities individually and walked around the classroom during lesson time. English was the discipline with most active engagement among children with intellectual disabilities, followed by music, art, science, Chinese, sports, social studies, and mathematics. Finally, academic engagement of children with and without intellectual disabilities was mostly passive. We discuss the factors related to academic engagement of children with intellectual disabilities and provide suggestions for improving their self-management skills and classroom organisation.
RESUMEN
CRISPR/Cas-based diagnostics (CRISPR-Dx) face challenges, including difficulty in detecting ultrashort nucleotides, preamplification dependency, cross-contamination, insufficiency in on-pot detection paradigms, and inconvenience in detecting non-nucleic acid targets. This forum outlines the advances in engineered CRISPR RNA (crRNA) that address the aforementioned problems, highlighting challenges, opportunities, and future directions.
RESUMEN
Autophagy, a highly conserved protein degradation system, plays an important role in protecting cells from adverse environmental conditions. ATG8-INTERACTING PROTEIN1 (ATI1) acts as an autophagy receptor, but its functional mechanisms in plants' heat stress tolerance remain unclear. In this study, using LC-MS/MS, we identified malate dehydrogenase (SlMDH3) as a SlATI1-interacting protein. Further studies showed that heat stress induced the expression of SlMDH3 and SlMDH3 co-localized with SlATI1 under both 22 °C and 42 °C heat treatment conditions. Moreover, silencing of SlMDH3 increased the sensitivity of tomato to heat stress, as evidenced by exacerbated degradation of chlorophyll; accumulation of MDA, H2O2, and dead cells; increased relative conductivity; and inhibition of stress-related gene expression. Conversely, overexpression of SlMDH3 improved tomato's heat tolerance, leading to opposite effects on physiological indicators and gene expression compared to SlMDH3 silencing. Taken together, our study suggests that SlMDH3 interacts with SlATI1 and positively regulates tomato heat tolerance.
Asunto(s)
Autofagia , Regulación de la Expresión Génica de las Plantas , Respuesta al Choque Térmico , Proteínas de Plantas , Solanum lycopersicum , Termotolerancia , Solanum lycopersicum/metabolismo , Solanum lycopersicum/genética , Proteínas de Plantas/metabolismo , Proteínas de Plantas/genética , Termotolerancia/genética , Autofagia/genética , Unión Proteica , Plantas Modificadas GenéticamenteRESUMEN
Aims/Background Although electromyography has been extensively used in the diagnosis of neurological diseases, there is no comprehensive understanding of the electromyography manifestations of spinal dural arteriovenous fistula. Given the widespread use of electromyography in the diagnosis of neurological conditions, it is worthwhile to holistically analyse the electromyography findings of spinal dural arteriovenous fistula to differentiate it from neurological diseases that share similar clinical manifestations. The aim of this study is to evaluate whether electromyography can distinguish spinal dural arteriovenous fistula from longitudinally extensive transverse myelitis. Methods We holistically reviewed files of all patients who were diagnosed with spinal dural arteriovenous fistula or longitudinally extensive transverse myelitis at The First Medical Centre of PLA General Hospital from 1 January 2010 to 31 December 2020. We compared the symptomology, epidemiology, and imaging results of patients with spinal dural arteriovenous fistula and longitudinally extensive transverse myelitis, placing emphasis on their electromyography manifestations. Student's t test was used to analyse normally distributed data, while Chi-square test was used to compare classification statistics. Results Lesions of spinal dural arteriovenous fistula shown on images tend to appear at lower lumbar and sacral segments, whereas lesions of the cervical and upper thoracic segments are more characteristic of longitudinally extensive transverse myelitis. Spinal dural arteriovenous fistula patients and longitudinally extensive transverse myelitis patients overlap in terms of clinical manifestations. After comparison, the two groups of patients had different demographics (age, sex), onset mode, predisposing factors before onset, and electromyographic features. The electromyographic features of patients with spinal dural arteriovenous fistula were associated with neurogenic damage (p < 0.001). Conclusions In patients with spinal dural arteriovenous fistula, electromyography can help clinicians to identify early disease, avoid patient treatment delay, and eliminate unnecessary treatment.
Asunto(s)
Malformaciones Vasculares del Sistema Nervioso Central , Electromiografía , Mielitis Transversa , Humanos , Electromiografía/métodos , Masculino , Femenino , Mielitis Transversa/diagnóstico , Malformaciones Vasculares del Sistema Nervioso Central/complicaciones , Malformaciones Vasculares del Sistema Nervioso Central/fisiopatología , Malformaciones Vasculares del Sistema Nervioso Central/diagnóstico , Estudios Retrospectivos , Persona de Mediana Edad , Adulto , Anciano , Diagnóstico Diferencial , Enfermedades de la Médula Espinal/diagnóstico , Enfermedades de la Médula Espinal/fisiopatología , Imagen por Resonancia Magnética/métodosRESUMEN
To explore the techniques, safety, and feasibility of minimally invasive neurosurgery through the supraorbital eyebrow arch keyhole approach by neuroendoscopy. Retrospective analysis of clinical data of patients with various cranial diseases treated by transcranial neuroendoscopic supraorbital eyebrow keyhole approach in our hospital from March 2021 to October 2023. A total of 39 complete cases were collected, including 21 cases of intracranial aneurysms, 9 cases of intracranial space occupying lesions, 5 cases of brain trauma, 3 cases of cerebrospinal fluid rhinorrhea, and 1 case of cerebral hemorrhage. All patients' surgeries were successful. The good prognosis rate of intracranial aneurysms was 17/21 (81%), and the symptom improvement rate of intracranial space occupying lesions was 8/9 (88.9%). Among them, the initial symptoms of one patient with no improvement were not related to space occupying, while the total effective rate of the other three types of patients was 9/9 (100%). The average length of the craniotomy bone window of the supraorbital eyebrow arch keyhole is 3.77 ± 0.31 cm, and the average width is 2.53 ± 0.23 cm. The average postoperative hospital stay was 14.77 ± 6.59 days. The average clearance rate of hematoma by neuroendoscopy is 95.00% ± 1.51%. Our results indicate that endoscopic surgery through the supraorbital eyebrow arch keyhole approach is safe and effective for the treatment of anterior skull base lesions and cerebral hemorrhage. However, this retrospective study is a single center, small sample study, and the good surgical results do not exclude the subjective screening of suitable patients by clinical surgeons, which may have some bias. Although the clinical characteristics such as indications and contraindications of this surgical method still require further prospective and multicenter clinical research validation, our study still provides a new approach and choice for minimally invasive surgical treatment of anterior skull base lesions.
Asunto(s)
Aneurisma Intracraneal , Procedimientos Quirúrgicos Mínimamente Invasivos , Neuroendoscopía , Base del Cráneo , Humanos , Masculino , Femenino , Persona de Mediana Edad , Adulto , Neuroendoscopía/métodos , Procedimientos Quirúrgicos Mínimamente Invasivos/métodos , Estudios Retrospectivos , Anciano , Aneurisma Intracraneal/cirugía , Aneurisma Intracraneal/diagnóstico por imagen , Base del Cráneo/cirugía , Craneotomía/métodos , Resultado del Tratamiento , Adulto Joven , Procedimientos Neuroquirúrgicos/métodos , Hemorragia Cerebral/cirugíaRESUMEN
The combination of higher-order topological insulators and valley photonic crystals has recently aroused extensive attentions due to the great potential in flexible and efficient optical field manipulations. Here, we computationally propose a photonic device for the 1550 nm communication band, in which the topologically protected electromagnetic modes with high quality can be selectively triggered and modulated on demand. Through introducing two valley photonic crystal units without any structural alteration, we successfully achieve multi-dimensional coupled topological states thanks to the diverse electromagnetic characteristics of two valley edge states. According to the simulations, the constructed topological photonic devices can realize Fano lines on the spectrum and show high-quality localized modes by tuning the coupling strength between the zero-dimensional valley corner states and the one-dimensional valley edge states. Furthermore, we extend the valley-locked properties of edge states to higher-order valley topological insulators, where the selected corner states can be directionally excited by chiral source. More interestingly, we find that the modulation of multi-dimensional coupled photonic topological states with pseudospin dependence become more efficient compared with those uncoupled modes. This work presents a valuable approach for multi-dimensional optical field manipulation, which may support potential applications in on-chip integrated nanophotonic devices.
RESUMEN
The mapping of long-wavelength phonons is important to understand and manipulate the thermal transport in multilayered structures, but it remains a long-standing challenge due to the collective behaviors of phonons. In this study, an experimental demonstration of mapping the long-wavelength phonons in an alloyed Al0.1Ga0.9As/Al0.9Ga0.1As superlattice system is reported. Multiple strategies to filter out the short- to mid-wavelength phonons are used. The phonon mean-free-path-dependent thermal transport properties directly demonstrate both the suppression effect of the ErAs nanoislands and the contribution of long-wavelength phonons. The contribution from phonons with mean free path longer than 1 µm is clearly demonstrated. A model based on the Boltzmann transport equation is proposed to calculate and describe the thermal transport properties, which depicts a clear physical picture of the transport mechanisms. This method can be extended to map different wavelength phonons and become a universal strategy to explore their thermal transport in various application scenarios.
RESUMEN
Genetically modified crops (GMCs) have been discussed due to unknown safety, and thus, it is imperative to develop an effective detection technology. CRISPR/Cas is deemed a burgeoning technology for nucleic acid detection. Herein, we developed a novel detection method for the first time, which combined thermostable Cas12b with loop-mediated isothermal amplification (LAMP), to detect genetically modified (GM) soybeans in a customized one-pot vessel. In our method, LAMP-specific primers were used to amplify the cauliflower mosaic virus 35S promoter (CaMV35S) of the GM soybean samples. The corresponding amplicons activated the trans-cleavage activity of Cas12b, which resulted in the change of fluorescence intensity. The proposed bioassay was capable of detecting synthetic plasmid DNA samples down to 10 copies/µL, and as few as 0.05% transgenic contents could be detected in less than 40 min. This work presented an original detection method for GMCs, which performed rapid, on-site, and deployable detection.
Asunto(s)
Glycine max , Técnicas de Amplificación de Ácido Nucleico , Plantas Modificadas Genéticamente , Técnicas de Amplificación de Ácido Nucleico/métodos , Técnicas de Amplificación de Ácido Nucleico/instrumentación , Plantas Modificadas Genéticamente/genética , Plantas Modificadas Genéticamente/química , Glycine max/genética , Glycine max/química , Bioensayo/métodos , Sistemas CRISPR-Cas , Caulimovirus/genética , Proteínas Bacterianas/genéticaRESUMEN
Grain boundaries (GBs) and twin boundaries (TBs) in copper (Cu) are two major planar defects that influence electrical conductivity due to their complex electron transport characteristics, involving electron scattering and electron concentration. Understanding their local electronic states is crucial for the design of future conductor materials. In this study, we characterized electron behaviors at TBs and GBs within one Cu grain using atomic force microscopy. Our findings revealed that, compared with GBs, TBs exhibit better current transport capability (direct-current mode) and larger electromagnetic loss (high-frequency microwave mode). Both kelvin probe force microscopy and theoretical analysis suggested that TBs with smaller lattice disorder possess lower density of states at the Fermi level. The reduced density of states may result in decreased electron scattering and a lower electron concentration at TBs. The latter can be highlighted by the high-frequency skinning effect, manifested as larger electromagnetic loss and weaker high-frequency conductivity.
RESUMEN
Widespread alterations in RNA alternative splicing (AS) have been identified in adult gliomas. However, their regulatory mechanism, biological significance, and therapeutic potential remain largely elusive. Here, using a computational approach with both bulk and single-cell RNA-Seq, we uncover a prognostic AS signature linked with neural developmental hierarchies. Using advanced iPSC glioma models driven by glioma driver mutations, we show that this AS signature could be enhanced by EGFRvIII and inhibited by in situ IDH1 mutation. Functional validations of 2 isoform switching events in CERS5 and MPZL1 show regulations of sphingolipid metabolism and SHP2 signaling, respectively. Analysis of upstream RNA binding proteins reveals PTBP1 as a key regulator of the AS signature where targeting of PTBP1 suppresses tumor growth and promotes the expression of a neuron marker TUJ1 in glioma stem-like cells. Overall, our data highlights the role of AS in affecting glioma malignancy and heterogeneity and its potential as a therapeutic vulnerability for treating adult gliomas.
Asunto(s)
Empalme Alternativo , Glioma , Proteína de Unión al Tracto de Polipirimidina , Glioma/genética , Glioma/patología , Glioma/metabolismo , Glioma/terapia , Humanos , Proteína de Unión al Tracto de Polipirimidina/genética , Proteína de Unión al Tracto de Polipirimidina/metabolismo , Animales , Ratones , Ribonucleoproteínas Nucleares Heterogéneas/genética , Ribonucleoproteínas Nucleares Heterogéneas/metabolismo , Neoplasias Encefálicas/genética , Neoplasias Encefálicas/patología , Neoplasias Encefálicas/metabolismo , Neoplasias Encefálicas/terapia , Adulto , Células Madre Pluripotentes Inducidas/metabolismo , Línea Celular Tumoral , Proteínas de la Membrana/genética , Proteínas de la Membrana/metabolismo , Proteínas de Neoplasias/genética , Proteínas de Neoplasias/metabolismoRESUMEN
Vesicle transport plays important roles in plant tolerance against abiotic stresses. However, the contribution of a vesicle formation related protein CaSec16 (COPII coat assembly protein Sec16-like) in pepper tolerance to salt stress remains unclear. In this study, we report that the expression of CaSec16 was upregulated by salt stress. Compared to the control, the salt tolerance of pepper with CaSec16-silenced was compromised, which was shown by the corresponding phenotypes and physiological indexes, such as the death of growing point, the aggravated leaf wilting, the higher increment of relative electric leakage (REL), the lower content of total chlorophyll, the higher accumulation of dead cells, H2O2, malonaldehyde (MDA), and proline (Pro), and the inhibited induction of marker genes for salt-tolerance and vesicle transport. In contrast, the salt tolerance of pepper was enhanced by the transient overexpression of CaSec16. In addition, heterogeneously induced CaSec16 protein did not enhance the salt tolerance of Escherichia coli, an organism lacking the vesicle transport system. By yeast two-hybrid method, an ankyrin protein, CaANK2B, was identified as the interacting protein of CaSec16. The expression of CaANK2B showed a downward trend during the process of salt stress. Compared with the control, pepper plants with transient-overexpression of CaANK2B displayed increased salt tolerance, whereas those with CaANK2B-silenced exhibited reduced salt tolerance. Taken together, both the vesicle formation related protein CaSec16 and its interaction partner CaANK2B can improve the pepper tolerance to salt stress.
Asunto(s)
Ancirinas , Tolerancia a la Sal , Tolerancia a la Sal/genética , Ancirinas/genética , Ancirinas/metabolismo , Peróxido de Hidrógeno/metabolismo , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Estrés Fisiológico/genética , Plantas Modificadas Genéticamente/genética , Regulación de la Expresión Génica de las PlantasRESUMEN
OBJECTIVES: To construct pressure injury risk prediction models for emergency patients based on different machine learning algorithms, to optimize the best model, and to provide a suitable assessment tool for preventing the occurrence of pressure injuries in emergency patients. METHODS: A convenience sampling was used to select 312 patients admitted to the emergency department of a tertiary care hospital in Tianjin, China, from May 2022 to March 2023, and the patients were divided into a modeling group (n = 218) and a validation group (n = 94) in a 7:3 ratio. Based on the results of one-factor logistic regression analysis in the modeling group, three machine learning models, namely, logistic regression, decision tree, and neural network, were used to establish a prediction model for pressure injury in emergency patients and compare their prediction effects. The optimal model was selected for external validation of the model. RESULTS: The incidence of pressure injuries in emergency patients was 8.97 %, 64.52 % of pressure injuries occurred in the sacrococcygeal region, and 64.52 % were staged as stage 1. Serum albumin level, incontinence, perception, and mobility were independent risk factors for pressure injuries in emergency patients (P < 0.05), and the area under the ROC curve of the three models was 0.944-0.959, sensitivity was 91.8-95.5 %, specificity was 72.2-90.9 %, and the Yoden index was 0.677-0.802; the decision tree was the best model that The area under the ROC curve for the validation group was 0.866 (95 % CI: 0.688-1.000), with a sensitivity of 89.8 %, a specificity of 83.3 %, and a Yoden index of 0.731. CONCLUSIONS: The decision tree model has the best predictive efficacy and is suitable for individualized risk prediction of pressure injuries in emergency medicine specialties, which provides a reference for the prevention and early intervention of pressure injuries in emergency patients.
Asunto(s)
Servicio de Urgencia en Hospital , Aprendizaje Automático , Úlcera por Presión , Humanos , Úlcera por Presión/prevención & control , Úlcera por Presión/epidemiología , Femenino , Masculino , Estudios Prospectivos , Persona de Mediana Edad , China/epidemiología , Anciano , Adulto , Medición de Riesgo/métodos , Factores de Riesgo , Algoritmos , Estudios de Cohortes , Modelos Logísticos , Árboles de Decisión , IncidenciaRESUMEN
Alcea rosea, belonging to the Alcea genus in the Malvaceae family, originated from China, but it is now grown worldwide. A. rosea has been widely used in traditional Chinese medicine to alleviate constipation, pain, swelling, and sores. In February 2023, typical symptoms of fungal infection were observed on A. rosea at Guizhou Normal University in Guiyang, Guizhou Province, China. The disease incidence was over 90% (n = 100) for the surveyed A. rosea plants, and the disease severity range from 30% to 90%. The initial symptoms of A. rosea rust were the appearance of chlorotic spots on the leaves. Subsequently, numerous reddish to dark-brown erumpent pustules (telia) were observed. Gradually, the entire plant was covered by rust and the center of each lesion turned brown, necrotic, and ruptured over times, eventually causing defoliation. Voucher specimens of infected A. rosea leaves as representative samples have been deposited at Guizhou Normal University (GNU2023LS008). Telia are round in shape, mostly aggregated in mass, with a diameter of 0.28-0.78 mm (0.46 mm, n = 20). They range in color from reddish-brown to dark brown, and are mainly hypophyllous but occasionally formed on the adaxial leaf surface. The teliospores are fusoid with dimensions of 31.3-93.8 × 10.9-21.3 µm (57.5 × 15.1 µm average, n = 50), hyaline or yellowish to light-brown in color, mostly two-celled, with a smooth wall (1.5-3.0 µm) and a thickened apex (3.0-9.0 µm). However, teliospores which are one-, three-, or four-celled with a notch at the apex, are rarely observed. The morphological characteristics of host symptoms and teliospores were similar to those of Puccinia modiolae (Aime and Abbasi 2018; Albu et al. 2019). For phylogenetic analysis, genomic DNA was extracted from the teliospores of infected leaves. To confirm the species-level identification, PCR was performed on the extracted DNA to amplify the ribosomal DNA internal transcribed spacer (ITS) and large subunit (LSU) regions using primer pairs ITS1/ITS4 (Schoch et al. 2012) and NL1/NL4 (Ziemiecki et al. 1990), respectively. The resulting ITS DNA sequence (GenBank accession no. OR607960) showed 100% identity with P. modiolae sequences (OP369291.1), when the query coverage was 100%. The LSU DNA sequence obtained (OR607961.2) shared 99.85% similarity with P. modiolae (MK458702.1). A phylogenetic tree was constructed using MEGA7.0 and the maximum likelihood method based on the ITS and LSU sequences. The fungal isolates collected in this study and several reference sequences of P. modiolae were grouped within a clade that included the isolates reported on A. rosea in Korea (Ryu et al. 2023), with 100% bootstrap support. Pathogenicity testing was conducted by gently pressing spore powder of naturally diseased leaves onto young leaves of three healthy A. rosea plants, with three noninoculated healthy plants serving as controls. The inoculated and noninoculated plants were kept in a growth chamber at the 26°C with a 12 hour light/dark cycle and 80% humidity. After 2 weeks, all inoculated A. rosea plants showed characteristic disease symptoms of rust infection and telia of P. modiolae, while control plants remained symptomless. The pathogen was identical to that observed on the original diseased leaves. The study results indicate that the causal fungus responsible for the disease is P. modiolae, which has been previously reported on Malvaceae plants (Farr and Rossman 2022). To the best of our knowledge, this is the first report of P. modiolae on A. rosea in China. This study will contribute to an increased understanding of the host range of Puccinia modiolae.
RESUMEN
Chiral anomaly bulk states (CABSs) can be realized by choosing appropriate boundary conditions in a finite-size waveguide composed of two-dimensional Dirac semimetals, which have unidirectional and robust transport similar to that of valley edge states. CABSs use almost all available guiding space, which greatly improves the utilization of metamaterials. Here, free-boundary-induced CABSs in elastic twisted kagome metamaterials with C_{3v} symmetry are experimentally confirmed. The robust valley-locked transport and complete valley state conversion are experimentally observed. Importantly, the sign of the group velocity near the K and K^{'} points can be reversed by suspending masses at the boundary to manipulate the onsite potential. Moreover, CABSs are demonstrated in nanoelectromechanical phononic crystals by constructing an impedance-mismatched hard boundary. These results open new possibilities for designing more compact, space-efficient, and robust elastic wave macro- and microfunctional devices.
RESUMEN
Coherent phonon transfer via high-quality factor (Q) mechanical resonator strong coupling has garnered significant interest. Yet, the practical applications of these strongly coupled resonator devices are largely constrained by their vulnerability to fabrication defects. In this study, topological strong coupling of gigahertz frequency surface acoustic wave (SAW) resonators with lithium niobate is achieved. The nanoscale grooves are etched onto the lithium niobate surface to establish robust SAW topological interface states (TISs). By constructing phononic crystal (PnC) heterostructures, a strong coupling of two SAW TISs, achieving a maximum Rabi splitting of 22 MHz and frequency quality factor product fQm of ≈1.2 × 1013 Hz, is realized. This coupling can be tuned by adjusting geometric parameters and a distinct spectral anticrossing is experimentally observed. Furthermore, a dense wavelength division multiplexing device based on the coupling of multiple TISs is demonstrated. These findings open new avenues for the development of practical topological acoustic devices for on-chip sensing, filtering, phonon entanglement, and beyond.
RESUMEN
Vertically stacked multiple atomically thin layers have recently widened the landscape of rich optical structures thanks to these quantum metamaterials or van der Waals (vdW) materials, featuring hyperbolic polaritons with unprecedented avenues for light. Despite their far-reaching implications, most of their properties rest entirely on a trivial band topological origin. Here, a 2D approach is adopted toward a micromechanical vdW analogue that, as a result of engineered chiral and mirror symmetries, provides topologically resilient hyperbolic radiation of mechanical vibrations in the ultrasonic regime. By applying laser vibrometry of the micrometer-sized metasurface, we are able to exhibit the exotic fingerprints of robust hyperbolic radiation spanning several frequencies, which beyond their physical relevance, may enable ultrasonic technologies.
RESUMEN
Food safety concerns have become a significant threat to human health and well-being, catching global attention in recent years. As a result, it is imperative to research conceptually novel biosensing and effective techniques for food matrices detection. Currently, DNA-templated metal nanoclusters (DNA-MNCs) are considered as one of the most promising nanomaterials due to their excellent properties in biosensing. While DNA-MNCs have garnered increasing interest, the reviews of design strategies, applications, and futuristic prospects for biosensing have been hardly found especially in food safety. The synthesis of DNA-MNCs and their use as biosensing materials in food contamination detection, including pathogenic bacteria, toxins, heavy metals, residues of pesticides, and others were comprehensively reviewed. In addition, we summarize the properties of DNA-MNCs briefly and discuss the challenges and future trends. The application of DNA-MNCs powered biosensing has been demonstrated and actively studied, which is a promising paradigm for food safety testing that can supplement or even replace current existing methods. Despite the challenges of difficulty regulating accurately, poor stability, low quantum yield, and difficult commercial transformation, the application prospects of DNA-MNCs biosensors are promising. This review aims to provide insights and directions for the future development of DNA-MNCs based food detection technology.
Asunto(s)
Técnicas Biosensibles , Metales Pesados , Nanoestructuras , Plaguicidas , Humanos , Inocuidad de los Alimentos , ADN/genética , ADN/química , Nanoestructuras/química , Técnicas Biosensibles/métodosRESUMEN
Single-atom catalysts (SACs) with maximized metal atom utilization and intriguing properties are of utmost importance for energy conversion and catalysis science. However, the lack of a straightforward and scalable synthesis strategy of SACs on diverse support materials remains the bottleneck for their large-scale industrial applications. Herein, we report a general approach to directly transform bulk metals into single atoms through the precise control of the electrodissolution-electrodeposition kinetics in ionic liquids and demonstrate the successful applicability of up to twenty different monometallic SACs and one multimetallic SAC with five distinct elements. As a case study, the atomically dispersed Pt was electrodeposited onto Ni3N/Ni-Co-graphene oxide heterostructures in varied scales (up to 5 cm × 5 cm) as bifunctional catalysts with the electronic metal-support interaction, which exhibits low overpotentials at 10 mA cm-2 for hydrogen evolution reaction (HER, 30 mV) and oxygen evolution reaction (OER, 263 mV) with a relatively low Pt loading (0.98 wt%). This work provides a simple and practical route for large-scale synthesis of various SACs with favorable catalytic properties on diversified supports using alternative ionic liquids and inspires the methodology on precise synthesis of multimetallic single-atom materials with tunable compositions.
RESUMEN
Carbonaceous particles are an important chemical component of atmospheric fine particles. In this study, a single particle aerosol mass spectrometer was used to continuously measure the carbonaceous particles in Chengdu, one of the megacities most affected by haze in China, from January 22 to March 3, 2021. During the observation period, the average mass concentration of PM2.5 was 62.3 ± 37.2 µg m-3, and the emissions from mobile sources were more prominent. Carbonaceous particles accounted for 68.6% of the total particles and could be classified into 10 categories, with elemental carbon (EC) mixed with sulfate (EC-S) particles making the highest contribution (33.1%). EC particles rich in secondary components and organic carbon (OC) particles rich in secondary component exhibited different diurnal variations, suggesting different sources and mixing mechanisms. From "excellent" to "polluted" days, the contributions of EC-S, EC mixed with sulfate and nitrate (EC-SN) and OC mixed with EC (OC-EC) particles increased by 9.8%, 4.5% and 6.6%, respectively, and thus these particles are key targets for future pollution control. The potential source contribution of the southwest area was stronger than that of other areas, and the potential contribution of regional transport to EC-related particles was stronger than to OC-related particles. Most particles were highly mixed with sulfate or nitrate, and the level of secondary mixing further enhanced as pollution worsened.
Asunto(s)
Contaminantes Atmosféricos , Material Particulado , Material Particulado/análisis , Contaminantes Atmosféricos/análisis , Tamaño de la Partícula , Nitratos/análisis , Estaciones del Año , China , Compuestos Orgánicos , Aerosoles/análisis , Carbono/análisis , Sulfatos/análisis , Monitoreo del AmbienteRESUMEN
Sarafloxacin (SAR), one of the most widely used fluoroquinolone antibiotics, is a serious threat to aquatic environments and human health due to its illegal abuse. Herein, we first screened an aptamer (SAR-1) that specifically binds to SAR using capture-SELEX technology. Based on molecular docking technology, SAR-1 was gradually truncated, and a short SAR-1a with better affinity and specificity was obtained. The optimal SAR-1a was further combined with a Pt nanoparticle (Pt NP)- decorated bimetallic Fe/Co-MOF to fabricate a multimode sensing platform for SAR determination. The Fe/Co-MOF@Pt NPs exhibited excellent peroxidase-like activity, which catalyzed the H2O2-mediated oxidation of 3,3',5,5'-tetramethylbenzidine (TMB), thereby enabling visual detection of SAR. Meanwhile, the generated oxTMB can also produce SERS responses and be used for the SERS detection of SAR. Moreover, the inherent fluorescence property of Fe/Co-MOF@Pt NPs enabled fluorescence detection of SAR. The designed triple-readout aptasensor showed good sensitivity for SAR detection with limits of detection of 0.125 ng/mL (fluorescent mode) and 0.05 ng/mL (colorimetric and SERS mode). The aptamer-based triple-mode sensing platform provided mutual verification of detection results in different output modes, effectively improving the assay accuracy and providing a promising tool for highly sensitive, selective, and accurate determination of SAR in daily life.