RESUMEN
Self-assembled monolayers (SAMs) have become pivotal in achieving high-performance perovskite solar cells (PSCs) and organic solar cells (OSCs) by significantly minimizing interfacial energy losses. In this study, we propose a co-adsorb (CA) strategy employing a novel small molecule, 2-chloro-5-(trifluoromethyl)isonicotinic acid (PyCA-3F), introducing at the buried interface between 2PACz and the perovskite/organic layers. This approach effectively diminishes 2PACz's aggregation, enhancing surface smoothness and increasing work function for the modified SAM layer, thereby providing a flattened buried interface with a favorable heterointerface for perovskite. The resultant improvements in crystallinity, minimized trap states, and augmented hole extraction and transfer capabilities have propelled power conversion efficiencies (PCEs) beyond 25% in PSCs with a p-i-n structure (certified at 24.68%). OSCs employing the CA strategy achieve remarkable PCEs of 19.51% based on PM1:PTQ10:m-BTP-PhC6 photoactive system. Notably, universal improvements have also been achieved for the other two popular OSC systems. After a 1000-hour maximal power point tracking, the encapsulated PSCs and OSCs retain approximately 90% and 80% of their initial PCEs, respectively. This work introduces a facile, rational, and effective method to enhance the performance of SAMs, realizing efficiency breakthroughs in both PSCs and OSCs with a favorable p-i-n device structure, along with improved operational stability.
RESUMEN
Here, a simple method of applying dimethylformamide (DMF) as cosolvent in the sol-gel technology is used to improve the quality of ZnO bulk films. First-principles calculations show that with the addition of polar solvent DMF, the adsorption energy (Eads) between the solvent and Zn(OH)2 increases from -1.42 to -1.74 eV, which can stabilize the existence of Zn(OH)2, thereby promoting the ZnO synthesis. Besides, the elimination of amine residues in the DMF-ZnO film significantly suppress the photocatalytic activity induced by amine-induced coordination or redox reactions. Inverted organic solar cells (OSCs) based on PM6:Y6 and PM6:BTP-eC9 achieves impressive power conversion efficiencies (PCE) of 17.58 and 18.14%, respectively. Furthermore, benefiting from the reduced defects of bulk ZnO, pseudo-bilayer bulk heterojunction (PBHJ) devices based on the optimized ZnO film exhibited superior stability, the PM6:Y6 devices based on DMF-ZnO ETLs can maintain 90.28% of their initial PCE after 1000 h of thermal aging at 85 °C, and 80.98% of their initial PCE after 168 h of UV aging. This simple solvent optimization strategy can significantly improve the charge transport of ZnO bulk films, making it a reliable strategy for the preparation of electron transport layers in OSCs.
RESUMEN
Inverted perovskite/organic tandem solar cells (P/O TSCs) suffer from poor long-term device stability due to halide segregation in organic-inorganic hybrid wide-band gap (WBG) perovskites, which hinders their practical deployment. Therefore, developing all-inorganic WBG perovskites for incorporation into P/O TSCs is a promising strategy because of their superior stability under continuous illumination. However, these inorganic WBG perovskites also face some critical issues, including rapid crystallization, phase instability, and large energy loss, etc. To tackle these issues, two multifunctional additives based on 9,10-anthraquinone-2-sulfonic acid (AQS) are developed to regulate the perovskite crystallization by mediating the intermediate phases and suppress the halide segregation through the redox-shuttle effect. By coupling with organic cations having the desirable functional groups and dipole moments, these additives can effectively passivate the defects and adjust the alignment of interface energy levels. Consequently, a record Voc approaching 1.3â V with high power conversion efficiency (PCE) of 18.59 % could be achieved in a 1.78â eV band gap single-junction inverted all-inorganic PSC. More importantly, the P/O TSC derived from this cell demonstrates a T90 lifetime of 1000â h under continuous operation, presenting the most stable P/O TSCs reported so far.
RESUMEN
The migration of mobile ionic halide vacancies is usually considered detrimental to the performance and stability of perovskite optoelectronic devices. Taking advantage of this intrinsic feature, we fabricated a CsPbI3 perovskite quantum dot (PQD)-based write-once-read-many-times (WORM) memory device with a simple sandwich structure that demonstrates intrinsic ternary states with a high ON/OFF ratio of 103:102:1 and a long retention time of 104 s. Through electrochemical impedance spectroscopy, we proved that the resistive switching is achieved by the migration of mobile iodine vacancies (VIs) under an electric field to form conductive filaments (CFs). Using in situ conductive atomic force microscopy, we further revealed that the multilevel property arises from the different activation energies for VIs to migrate at grain boundaries and grain interiors, resulting in two distinct pathways for CFs to grow. Our work highlights the potential of CsPbI3 PQD-based WORM devices, showcasing intrinsic multilevel properties achieved in a simple device structure by rationally controlling the drift of ionic defects.
RESUMEN
Leveraging breakthroughs in Y-series nonfullerene acceptors (NFAs), organic solar cells (OSCs) have achieved impressive power conversion efficiencies (PCEs) exceeding 19%. However, progress in advancing OSCs has decelerated due to constraints in realizing the full potential of the Y-series NFAs. Herein, a simple yet effective solid additive-induced preaggregation control method employing 2-chloro-5-iodopyridine (PDCI) is reported to unlock the full potential of the Y-series NFAs. Specifically, PDCI interacts predominantly with Y-series NFAs enabling enhanced and ordered phase-aggregation in solution. This method leads to a notable improvement and a redshifted absorption of the acceptor phase during film formation, along with improved crystallinity. Moreover, the PDCI-induced preaggregation of NFAs in the solution enables ordered molecule packing during the film-formation process through delicate intermediate states transition. Consequently, the PDCI-induced preaggregated significantly improves the PCE of PM6:Y6 OSCs from 16.12% to 18.12%, among the best values reported for PM6:Y6 OSCs. Importantly, this approach is universally applicable to other Y-series NFA-based OSCs, achieving a champion PCE of 19.02% for the PM6:BTP-eC9 system. Thus, the preaggregation control strategy further unlocks the potential of Y-series NFAs, offering a promising avenue for enhancing the photovoltaic performance of Y-series NFA-based OSCs.
RESUMEN
As the rise of nonfullerene acceptors (NFA) has allowed lab-scale organic solar cells (OSC) to reach 20% efficiency, translating these devices into roll-to-roll compatible fabrication still poses many challenges for researchers. Among these are the use of green solvent solubility for large-scale manufacture, roll-to-roll compatible fabrication, and, not least, information on charge carrier dynamics in each upscaling step, to further understand the gap in performance. In this work, the reproducibility of champion devices using slot-die coating with 14% power conversion efficiency (PCE) is demonstrated, under the condition that the optimal thickness is maintained. It is further shown that for the donor:acceptor (D:A) blend PM6:Y12, the processing solvent has a more significant impact on charge carrier dynamics compared to the deposition technique. It is found that the devices processed with o-xylene feature a 40% decrease in the bimolecular recombination coefficient compared to those processed with CB, as well as a 70% increase in effective mobility. Finally, it is highlighted that blade-coating yields devices with similar carrier dynamics to slot-die coating, making it the optimal choice for lab-scale optimization with no significant loss in translation toward up-scale.
RESUMEN
Inverted organic solar cells (OSCs) have garnered significant interest due to their remarkable stability. In this study, the efficiency and stability of inverted OSCs are enhanced via the in situ self-organization (SO) of an interfacial modification material Phen-NaDPO onto tin oxide (SnO2). During the device fabrication, Phen-NaDPO is spin-coated with the active materials all together on SnO2. Driven by the interactions with SnO2 and the thermodynamic forces due to its high surface energy and the convection flow, Phen-NaDPO spontaneously migrates to the SnO2 interface, resulting in the formation of an in situ modification layer on SnO2. This self-organization of Phen-NaDPO not only effectively reduces the work function of SnO2, but also enhances the ordered molecular stacking and manipulates the vertical morphology of the active layer, which suppress the surface trap-assisted recombination and minimize the charge extraction. As a result, the SO devices based on PM6:Y6 exhibit significantly improved photovoltaic performance with an enhanced power conversion efficiency of 17.62%. Moreover, the stability of the SO device is also improved. Furthermore, the SO ternary devices based on PM6:D18:L8-BO achieved an impressive PCE of 18.87%, standing as one of the highest values for single-junction inverted organic solar cells to date.
RESUMEN
Localized excitation in traditional organic photocatalysts typically prevents the generation and extraction of photo-induced free charge carriers, limiting their activity enhancement under illumination. Here, we enhance delocalized photoexcitation of small molecular photovoltaic catalysts by weakening their electron-phonon coupling via rational fluoro-substitution. The optimized 2FBP-4F catalyst we develop here exhibits a minimized Huang-Rhys factor of 0.35 in solution, high dielectric constant and strong crystallization in the solid state. As a result, the energy barrier for exciton dissociation is decreased, and more importantly, polarons are unusually observed in 2FBP-4F nanoparticles (NPs). With the increased hole transfer efficiency and prolonged charge carrier lifetime highly related to enhanced exciton delocalization, the PM6 : 2FBP-4F heterojunction NPs at varied concentration exhibit much higher optimized photocatalytic activity (207.6-561.8â mmol h-1 g-1) for hydrogen evolution than the control PM6 : BP-4F and PM6 : 2FBP-6F NPs, as well as other reported photocatalysts under simulated solar light (AM 1.5G, 100â mW cm-2).
RESUMEN
The meta-stable active layer morphology of organic solar cells (OSCs) is identified as the main cause of the rapid burn-in loss of power conversion efficiency (PCE) during long-term device operation. However, effective strategies to eliminate the associated loss mechanisms from the initial stage of device operation are still lacking, especially for high-efficiency material systems. Herein, the introduction of molecularly engineered dimer acceptors with adjustable thermal transition properties into the active layer of OSCs to serve as supramolecular stabilizers for regulating the thermal transitions and optimizing the crystallization of the absorber composites is reported. By establishing intimate π-π interactions with small-molecule acceptors, these stabilizers can effectively reduce the trap-state density (Nt) in the devices to achieve excellent PCEs over 19%. More importantly, the low Nt associated with an initially optimized morphology can be maintained under external stresses to significantly reduce the PCE burn-in loss in devices. This research reveals a judicious approach to improving OPV stability by establishing a comprehensive correlation between material properties, active-layer morphology, and device performance, for developing burn-in-free OSCs.
RESUMEN
Suppressing trap-assisted nonradiative losses through passivators is a prerequisite for efficient perovskite light-emitting diodes (PeLEDs). However, the complex bonding between passivators and perovskites severely suppresses the passivation process, which still lacks comprehensive understanding. Herein, the number, category, and degree of bonds between different functional groups and the perovskite are quantitatively assessed to study the passivation dynamics. Functional groups with high electrostatic potential and large steric hindrance prioritize strong bonding with organic cations and halides on the perfect surface, leading to suppressed coordination with bulky defects. By modulating the binding priorities and coordination capacity, hindrance from the intense interaction with perfect perovskite is significantly reduced, leading to a more direct passivation process. Consequently, the near-infrared PeLED without external light out-coupling demonstrates a record external quantum efficiency of 24.3% at a current density of 42 mA cm-2. In addition, the device exhibits a record-level-cycle ON/OFF switching of 20 000 and ultralong half-lifetime of 1126.3 h under 5 mA cm-2. An in-depth understanding of the passivators can offer new insights into the development of high-performance PeLEDs.
RESUMEN
Solution-processed high-performing ambipolar organic phototransistors (OPTs) can enable low-cost integrated circuits. Here, a heteroatom engineering approach to modify the electron affinity of a low band gap diketopyrrolopyrole (DPP) co-polymer, resulting in well-balanced charge transport, a more preferential edge-on orientation and higher crystallinity, is demonstrated. Changing the comonomer heteroatom from sulfur (benzothiadiazole (BT)) to oxygen (benzooxadiazole (BO)) leads to an increased electron affinity and introduces higher ambipolarity. Organic thin film transistors fabricated from the novel PDPP-BO exhibit charge carrier mobility of 0.6 and 0.3 cm2 Vsâ»1 for electrons and holes, respectively. Due to the high sensitivity of the PDPP-based material and the balanced transport in PDPP-BO, its application as an NIR detector in an OPT architecture is presented. By maintaining a high on/off ratio (9 × 104), ambipolar OPTs are shown with photoresponsivity of 69 and 99 A Wâ»1 and specific detectivity of 8 × 107 for the p-type operation and 4 × 109 Jones for the n-type regime. The high symmetric NIR-ambipolar OPTs are also evaluated as ambipolar photo-inverters, and show a 46% gain enhancement under illumination.
RESUMEN
Tin-based perovskite solar cells (PSCs) are promising environmentally friendly alternatives to their lead-based counterparts, yet they currently suffer from much lower device performance. Due to variations in the chemical properties of lead (II) and tin (II) ions, similar treatments may yield distinct effects resulting from differences in underlying mechanisms. In this work, a surface treatment on tin-based perovskite is conducted with a commonly employed ligand, iso-butylammonium iodide (iso-BAI). Unlike the passivation effects previously observed in lead-based perovskites, such treatment leads to the recrystallization of the surface, driven by the higher solubility of tin-based perovskite in common solvents. By carefully designing the solvent composition, the perovskite surface is effectively modified while preserving the integrity of the bulk. The treatment led to enhanced surface crystallinity, reduced surface strain and defects, and improved charge transport. Consequently, the best-performing power conversion efficiency of FASnI3 PSCs increases from 11.8% to 14.2%. This work not only distinguishes the mechanism of surface treatments in tin-based perovskites from that of lead-based counterparts, but also underscores the critical role in designing tailor-made strategies for fabricating efficient tin-based PSCs.
RESUMEN
Dopant-free hole transport materials (HTMs) are ideal materials for highly efficient and stable n-i-p perovskite solar cells (PSCs), but most current design strategies for tailoring the molecular structures of HTMs are limited to single strategy. Herein, four HTMs based on dithienothiophenepyrrole (DTTP) core are devised through dual-strategy methods combining conjugate engineering and side chain engineering. DTTP-ThSO with ester alkyl chain that can form six-membered ring by the Sâ â â O noncovalent conformation lock with thiophene in the backbone shows good planarity, high-quality film, matching energy level and high hole mobility, as well as strong defect passivation ability. Consequently, a remarkable power conversion efficiency (PCE) of 23.3 % with a nice long-term stability is achieved by dopant-free DTTP-ThSO-based PSCs, representing one of the highest values for un-doped organic HTMs based PSCs. Especially, the fill factor (FF) of 82.3 % is the highest value for dopant-free small molecular HTMs-based n-i-p PSCs to date. Moreover, DTTP-ThSO-based devices have achieved an excellent PCE of 20.9 % in large-area (1.01â cm2) devices. This work clearly elucidates the structure-performance relationships of HTMs and offers a practical dual-strategy approach to designing dopant-free HTMs for high-performance PSCs.
RESUMEN
The inefficient charge transport and large exciton binding energy of quasi-2D perovskites pose challenges to the emission efficiency and roll-off issues for perovskite light-emitting diodes (PeLEDs) despite excellent stability compared to 3D counterparts. Herein, alkyldiammonium cations with different molecular sizes, namely 1,4-butanediamine (BDA), 1,6-hexanediamine (HDA) and 1,8-octanediamine (ODA), are employed into quasi-2D perovskites, to simultaneously modulate the injection efficiency and recombination dynamics. The size increase of the bulky cation leads to increased excitonic recombination and also larger Auger recombination rate. Besides, the larger size assists the formation of randomly distributed 2D perovskite nanoplates, which results in less efficient injection and deteriorates the electroluminescent performance. Moderate exciton binding energy, suppressed 2D phases and balanced carrier injection of HDA-based PeLEDs contribute to a peak external quantum efficiency of 21.9%, among the highest in quasi-2D perovskite based near-infrared devices. Besides, the HDA-PeLED shows an ultralong operational half-lifetime T50 up to 479 h at 20 mA cmâ2, and sustains the initial performance after a record-level 30 000 cycles of ON-OFF switching, attributed to the suppressed migration of iodide anions into adjacent layers and the electrochemical reaction in HDA-PeLEDs. This work provides a potential direction of cation design for efficient and stable quasi-2D-PeLEDs.
RESUMEN
An organic photovoltaic bulk heterojunction comprises of a mixture of donor and acceptor materials, forming a semi-crystalline thin film with both crystalline and amorphous domains. Domain sizes critically impact the device performance; however, conventional X-ray scattering techniques cannot detect the contrast between donor and acceptor materials within the amorphous intermixing regions. In this study, we employ neutron scattering and targeted deuteration of acceptor materials to enhance the scattering contrast by nearly one order of magnitude. Remarkably, the PM6:deuterated Y6 system reveals a new length scale, indicating short-range aggregation of Y6 molecules in the amorphous intermixing regions. All-atom molecular dynamics simulations confirm that this short-range aggregation is an inherent morphological advantage of Y6 which effectively assists charge extraction and suppresses charge recombination as shown by capacitance spectroscopy. Our findings uncover the amorphous nanomorphology of organic photovoltaic thin films, providing crucial insights into the morphology-driven device performance.
RESUMEN
Organic photovoltaic cells using Y6 non-fullerene acceptors have recently achieved high efficiency, and it was suggested to be attributed to the charge-transfer (CT) nature of the excitations in Y6 aggregates. Here, by combining electroabsorption spectroscopy measurements and electronic-structure calculations, we find that the charge-transfer character already exists in isolated Y6 molecules but is strongly increased when there is molecular aggregation. Surprisingly, it is found that the large enhanced charge transfer in clustered Y6 molecules is not due to an increase in excited-state dipole moment, Δµ, as observed in other organic systems, but due to a reduced polarizability change, Δp. It is proposed that such a strong charge-transfer character is promoted by the stabilization of the charge-transfer energy upon aggregation, as deduced from density functional theory and four-state model calculations. This work provides insight into the correlation between molecular electronic properties and charge-transfer characteristics in organic electronic materials.
RESUMEN
Dielectric constant of non-fullerene acceptors plays a critical role in organic solar cells in terms of exciton dissociation and charge recombination. Current acceptors feature a dielectric constant of 3-4, correlating to relatively high recombination loss. We demonstrate that selenium substitution on acceptor central core can effectively modify molecule dielectric constant. The corresponding blend film presents faster hole-transfer of ~5 ps compared to the sulfur-based derivative (~10 ps). However, the blends with Se-acceptor also show faster charge recombination after 100 ps upon optical pumping, which is explained by the relatively disordered stacking of the Se-acceptor. Encouragingly, dispersing the Se-acceptor in an optimized organic solar cell system can interrupt the disordered aggregation while still retain high dielectric constant. With the improved dielectric constant and optimized fibril morphology, the ternary device exhibits an obvious reduction of non-radiative recombination to 0.221 eV and high efficiency of 19.0%. This work unveils heteroatom-substitution induced dielectric constant improvement, and the associated exciton dynamics and morphology manipulation, which finally contributes to better material/device design and improved device performance.
RESUMEN
For organic solar cells to be competitive, the light-absorbing molecules should simultaneously satisfy multiple key requirements, including weak-absorption charge transfer state, high dielectric constant, suitable surface energy, proper crystallinity, etc. However, the systematic design rule in molecules to achieve the abovementioned goals is rarely studied. In this work, guided by theoretical calculation, we present a rational design of non-fullerene acceptor o-BTP-eC9, with distinct photoelectric properties compared to benchmark BTP-eC9. o-BTP-eC9 based device has uplifted charge transfer state, therefore significantly reducing the energy loss by 41 meV and showing excellent power conversion efficiency of 18.7%. Moreover, the new guest acceptor o-BTP-eC9 has excellent miscibility, crystallinity, and energy level compatibility with BTP-eC9, which enables an efficiency of 19.9% (19.5% certified) in PM6:BTP-C9:o-BTP-eC9 based ternary system with enhanced operational stability.
RESUMEN
Environmentally friendly tin (Sn) perovskites have received considerable attention due to their great potential for replacing their toxic lead counterparts in applications of photovoltaics and light-emitting diodes (LEDs). However, the device performance of Sn perovskites lags far behind that of lead perovskites, and the highest reported external quantum efficiencies of near-infrared Sn perovskite LEDs are below 10%. The poor performance stems mainly from the numerous defects within Sn perovskite crystallites and grain boundaries, leading to serious non-radiative recombination. Various epitaxy methods have been introduced to obtain high-quality perovskites, although their sophisticated processes limit the scalable fabrication of functional devices. Here we demonstrate that epitaxial heterodimensional Sn perovskite films can be fabricated using a spin-coating process, and efficient LEDs with an external quantum efficiency of 11.6% can be achieved based on these films. The film is composed of a two-dimensional perovskite layer and a three-dimensional perovskite layer, which is highly ordered and has a well-defined interface with minimal interfacial areas between the different dimensional perovskites. This unique nanostructure is formed through direct spin coating of the perovskite precursor solution with tryptophan and SnF2 additives onto indium tin oxide glass. We believe that our approach will provide new opportunities for further developing high-performance optoelectronic devices based on heterodimensional perovskites.
RESUMEN
Achieving a more balanced charge transport by morphological control is crucial in reducing bimolecular and trap-assisted recombination and enhancing the critical parameters for efficient organic solar cells (OSCs). Hence, a facile strategy is proposed to reduce the crystallinity difference between donor and acceptor by incorporating a novel multifunctional liquid crystal small molecule (LCSM) BDTPF4-C6 into the binary blend. BDTPF4-C6 is the first LCSM based on a tetrafluorobenzene unit and features a low liquid crystal phase transition temperature and strong self-assembly ability, conducive to regulating the active layer morphology. When BDTPF4-C6 is introduced as a guest molecule into the PM6 : Y6 binary, it exhibits better compatibility with the donor PM6 and primarily resides within the PM6 phase because of the similarity-intermiscibility principle. Moreover, systematic studies revealed that BDTPF4-C6 could be used as a seeding agent for PM6 to enhance its crystallinity, thereby forming a more balanced and favourable charge transport with suppressed charge recombination. Intriguingly, dual Förster resonance energy transfer was observed between the guest molecule and the host donor and acceptor, resulting in an improved current density. This study demonstrates a facile approach to balance the charge mobilities and offers new insights into boosting the efficiency of single-junction OSCs beyond 20 %.