A porphyrin-modified CoMoO4 nanosensor array for the detection of crude baijiu.

The rapid classification of crude baijiu is pivotal for its industrialization and automated development. In this study, a colorimetric sensor array employing peroxidase nanase (Por-CoMoO4) was developed to detect reducing substances and crude baijiu. The peroxidase-like activity of CoMoO4 was significantly enhanced by porphyrin (Por), exhibiting a Km value of 0.044 mM and Vmax of 19.37 × 10-8 for TMB substrate. Peroxidase activity varies at different pH levels. Organic and crude baijiu scavenge free radicals, thereby inhibiting oxTMB formation and yielding distinctive fingerprint profiles. Using linear discriminant analysis, 14 types of small molecules and 16 varieties of Luzhou-flavor crude baijiu were identified within specific concentration ranges. The method achieved 100% accuracy in distinguishing baijiu samples sourced from different distilleries, offering a straightforward, rapid, and effective approach to differentiate crude baijiu during alcoholic beverage production.

Preclinical Evaluation of Protective Effects of Terpenoids Against Nanomaterial-Induced Toxicity: A Meta-Analysis.

Terpenoids, the largest class of natural products, have been demonstrated to confer antioxidant, anti-inflammatory, anti-apoptotic, and antitumor activities. However, whether terpenoids benefit populations exposed to nanomaterials through these mechanisms remains unclear. This meta-analysis was to evaluate the effects of terpenoids in preclinical models with nanomaterial exposure. Electronic database searching identified 39 studies. The meta-analysis by Stata 15.0 showed that terpenoid supplementation significantly improved cell viability and altered oxidative stress (decreased ROS, NO, MDA, and TOC and increased SOD, CAT, GPx, GSH, GSH-Px, and TAC)-, inflammation (decreased IL-6, IL-1ß, TNF-α, NF-κB, monocytes, and increased IL-10)-, apoptosis (reduced Bax, caspase-3, caspase-9, P53, and elevated Bcl-2)-, genotoxic (reduced tail length, % tail DNA, tail moment, DNA fragmentation, chromosomal aberration, and MNPCEs)-, liver function (reduced ALT, AST, and ALP)-, renal function (reduced creatinine, urea, and uric acid)-, reproductive function (increased sperm count, testosterone, Johnsen's score, and number of progeny)-, lipid profile (lower cholesterol, TG, LDL, and higher HDL)-, and carcinogenesis (downregulated AFP and CEA)-related biomarkers induced by nanomaterials. Subgroup analysis indicated that monoterpenoids and tetraterpenoids were particularly effective. Collectively, terpenoids may be a promising candidate for prevention of toxicities caused by nanomaterials.

A Novel Modified ZIF-8 Nanoparticle with Enhanced Interfacial Compatibility and Pervaporation Performance in a Mixed Matrix Membrane for De-Alcoholization in Low-Concentration Solutions.

This study investigated the enhancement in bioethanol recovery from mixed matrix membranes (MMMs) by functionalizing zeolite framework-8 (ZIF-8) with imidazolate. This study focused on the separation of ethanol from low-concentration ethanol/water mixtures (typical post-fermentation concentrations of 5-10 wt%). Specifically, ZIF-8 was modified by the shell-ligand exchange reaction (SLER) with 5,6-dimethylbenzimidazole (DMBIM), resulting in ZIF-8-DMBIM particles with improved hydrophobicity, organophilicity, larger size, and adjustable pore size. These particles were incorporated into a PEBAX 2533 matrix to produce ZIF-8-DMBIM/PEBAX MMMs using a dilution blending method. The resulting membranes showed significant performance enhancement: 8 wt% ZIF-8-DMBIM loading achieved a total flux of 308 g/m2·h and a separation factor of 16.03, which was a 36.8% increase in flux and 176.4% increase in separation factor compared with the original PEBAX membrane. In addition, performance remained stable during a 130 h cycling test. These improvements are attributed to the enhanced compatibility and dispersion of ZIF-8-DMBIM in the PEBAX matrix. In conclusion, the evaluation of nanofiller content, feed concentration, operating temperature, and membrane stability confirmed that ZIF-8-DMBIM/PEBAX MMM is ideal for ethanol recovery in primary bioethanol concentration processes.

Identification of novel RANKL inhibitors through in silico analysis.

Receptor activator of nuclear factor-κB ligand (RANKL) is considered the principal regulator of osteoclast differentiation. Therefore, strategies interfering with the RANKL-RANK signaling pathway may effectively inhibit osteoclast differentiation and mitigate bone resorption. Consequently, RANKL has become a promising target for new drug design strategies. Despite extensive research on specific drugs and antibodies, only a few have shown efficacy in treating osteoporosis. To address this challenge, we aimed to explore new approaches for designing drugs for osteoporosis. In this study, a 3D quantitative structure-activity relationship (QSAR) pharmacophore model was built for RANKL with reference to known inhibitor IC50 values. The optimal pharmacophore model was then employed as a 3D query to screen databases for novel lead compounds. The obtained compounds were subjected to ADMET and TOPKAT analyses to predict drug pharmacokinetics and toxicity. Molecular docking and de novo evolution approaches were applied to verify the docking binding affinities of the compounds. Five candidate compounds were subjected to further in vitro analyses to assess their anti-osteoporotic effects, among which compound 4 demonstrated significant inhibitory activity, achieving an inhibitory rate of 92.6 % on osteoclastogenesis at a concentration of 10 µM. Subsequent molecular dynamics (MD) simulations to assess the stability and behavior of compound 4 and its evolved variant, ZINC00059014397_Evo, within the RANKL binding site revealed that the variant is a potential therapeutic agent for targeting osteoclasts. This study offers valuable insights for developing next generation RANKL inhibitors for osteoporosis treatments.

Development of a Zn-Based Single-Atom Nanozyme for Efficient Hydrolysis of Glycosidic Bonds.

Hydrolytic enzymes are essential components in second-generation biofuel technology and food fermentation processes. Nanozymes show promise for large-scale industrial applications as replacements for natural enzymes due to their distinct advantages. However, there remains a research gap concerning glycosidase nanozymes. In this study, a Zn-based single-atom nanozyme (ZnN4-900) is developed for efficient glycosidic bond hydrolysis in an aqueous solution. The planar structure of the class-porphyrin N4 material approximatively mimicked the catalytic centers of natural enzymes, facilitating oxidase-like (OXD-like) activity and promoting glycosidic bond cleavage. Theoretical calculations show that the Zn site can act as Lewis acids, attacking the C─O bond in glycosidic bonds. Additionally, ZnN4-900 has the ability to degrade starch and produce reducing sugars that increased yeast cell biomass by 32.86% and ethanol production by 14.56%. This catalyst held promising potential for enhancing processes in ethanol brewing and starch degradation industries.

Melatonin intervention to prevent nanomaterial exposure-induced damages: A systematic review and meta-analysis of in vitro and in vivo studies.

Given its antioxidant, anti-inflammatory, and antiapoptotic properties, melatonin (MEL), a health-caring food to improve sleep disorders, is hypothesized to protect against nanomaterial exposure-induced toxicity. However, the conclusion derived from different studies seemed inconsistent. A meta-analysis of all available preclinical studies was performed to examine the effects of MEL on nanomaterial-induced damages. Eighteen relevant studies were retrieved through searching five electronic databases up to December 2023. The meta-analysis showed that relative to control, MEL treatment significantly increased cell viability (standardized mean difference [SMD = 1.27]) and alleviated liver function (lowered AST [SMD = -3.89] and ALT [SMD = -5.89]), bone formation (enhanced BV/TV [SMD = 4.13] and lessened eroded bone surface [SMD = -5.40]), and brain nerve (inhibition of AChE activity [SMD = -3.60]) damages in animals. The protective mechanisms of MEL against damages caused by nanomaterial exposure were associated with its antiapoptotic (decreased Bax/Bcl-2 ratio [SMD = -4.50] and caspase-3 levels [dose <100 µM: SMD = -3.66]), antioxidant (decreased MDA [in vitro: SMD = -2.84; in vivo: SMD = -4.27]), and anti-inflammatory (downregulated TNF-α [in vitro: SMD = -5.41; in vivo: SMD = -3.21] and IL-6 [in vitro: SMD = -5.90; in vivo: SMD = -2.81]) capabilities. In conclusion, our study suggests that MEL should be supplemented to prevent damages in populations exposed to nanomaterials.

Design and synthesis of 6,20-epoxy A-ring modified oridonin derivatives with antitumor activity through extrinsic and mitochondrial pathways.

Oridonin is an antitumor ent-kaurane diterpenoid that medicinal chemists have been paying close attention to in recent years. Herein, a novel 6,20-epoxy A-ring modified oridonin derivative 2 was obtained by a 6-step synthesis. A series of 14-O derivatives of 2 (EpskA1-EpskA24) were synthesized to further enhance the activity. Based on their cytotoxicity against MCF-7, A549 and L-02 cells, EpskA9, EpskA10 and EpskA21 were chosen for further screening to obtain a wider antitumor spectrum. Collectively, EpskA21 showed the most potent antiproliferative activity, inhibiting proliferation and migration, and inducing apoptosis and cell cycle arrest in MCF-7 and MIA-PaCa-2 cells. With the help of network pharmacology analysis, apoptosis-related proteins were selected and further tested by western blot assay. The inhibition of PI3K/AKT and an increase in the levels of Bax/Bcl-2 ratio, Cyt-C, cleaved-Caspase-9, cleaved-Caspase-3 and cleaved-PARP was observed, indicating that EpskA21 induced apoptosis through the mitochondrial pathway. Given that an increase in DR5 expression and activated Caspase-8 were also observed, the extrinsic apoptosis pathway might also be related to the antitumor effect.

The Impacts of Fast-track Surgery on Postoperative Deep Venous Thrombosis Among Patients with Lower Limb Fracture.

Purpose: This research was conducted to construct an ankle pump motion counter and system with orthopedic characteristics and analyze the impacts of fast-track surgery on postoperative deep venous thrombosis (DVT) among patients with lower limb fractures. Methods: First, an ankle pump motion counter system was set up to detect postoperative rehabilitation training (Hardware design: This involves components such as an accelerometer sensor, microcontroller, circuit design, power supply, and wireless module. The accelerometer sensor is used to monitor key points and capture motion signals, while the microcontroller handles frequency calculations and generates alerts for abnormal ankle pump motion parameters. Circuit design ensures the proper functioning of the device, and the power supply meets the requirements of the ankle pump motion counter. The wireless module is used for data transmission and communication with other devices. Software design: This includes software design for both the patient and doctor sides. The software design involves defining software requirements and module divisions, designing data acquisition and filtering programs, developing programs for data parameter reading and writing, implementing communication protocols, designing data communication programs, and creating rehabilitation training plans and training record programs). Then, a retrospective analysis was carried out for the subjects (100 patients with lower limb fractures treated in Zhejiang Hospital between June 2021 and June 2022. They were randomly enrolled into control and experimental groups (50 cases each). The ankle pump motion counter was utilized for the patients in the experimental group. Before surgery, gender, age, the incidence of venous thromboembolism (VTE), and the muscle strength of both lower limbs of the two groups were recorded. After surgery, numerical rating scale (NRS) pain scores, D-dimer (D-D), and average length of hospitalization 3 d after surgery and venous thrombosis of both lower limbs 5 d after surgery of two groups were compared. Results: D-D of the control group was significantly higher than that of the experimental group 3 days after surgery (P < .05), while the NRS pain score was relatively lower (P < .05). The average hospitalization length for the experimental group was 10.2 days versus 16.2 days for the control group. The incidence of VTE 5 days after the surgery was 2% for the experimental group compared to 6% for the control group (P < .05). Conclusion: The ankle pump motion counter system has the potential to improve VTE prevention, enhance patient compliance, streamline healthcare delivery, standardize care, and enable data-driven decision-making at a wider clinical level. By accurately monitoring ankle pump exercises and providing real-time feedback, this system can contribute to better patient outcomes, save time for healthcare providers, and facilitate evidence-based practices in the prevention of postoperative DVT among patients with lower limb fractures.

Xanthine oxidase immobilized cellulose membrane-based colorimetric biosensor for screening and detecting the bioactivity of xanthine oxidase inhibitors.

Xanthine oxidase (XO) is a typical target for hyperuricemia and gout, for which there are only three commercial xanthine oxidase inhibitors (XOIs): febuxostat, topiroxostat and allopurinol. However, these inhibitors have problems such as low bioactivity and several side effects. Therefore, the development of novel XOIs with high bioactivity for the treatment of hyperuricemia and gout is urgently needed. In this work we constructed a XO immobilized cellulose membrane colorimetric biosensor (XNCM) by the TEMPO oxidation, amide bond coupling and nitro blue tetrazolium chloride (NBT) loading method. As expected, the XNCM was able to detect xanthine, with high selectivity and sensitivity by colorimetric method with a distinctive color change from yellow to purple, which can be easily observed by the naked-eye in just 8 min without any complex instrumentation. In addition, the XNCM sensor performed screening of 21 different compounds and have been successfully pre-screened out XOIs with biological activity. Most importantly, the XNCM was able to quantitatively detect the IC50 values of two commercial inhibitors (febuxostat and allopurinol). All the results confirmed that the XNCM is a simple and effective tool which can be used for the accelerated screening of XOIs and has the potential to uncover additional XOIs.

Histidine modified Fe3O4 nanoparticles improving the ethanol yield and tolerance of Saccharomyces cerevisiae.

Saccharomyces cerevisiae, the primary microorganism involved in ethanol production, is hindered by the accumulation of ethanol, leading to reduced ethanol production. In this study, we employed histidine-modified Fe3O4 nanoparticles (His-Fe3O4) for the first time, to the best of our knowledge, as a method to enhance ethanol yield during the S. cerevisiae fermentation process. The results demonstrated that exposing S. cerevisiae cells to Fe3O4 nanoparticles (Fe3O4 NPs) led to increased cell proliferation and glucose consumption. Moreover, the introduction of His-Fe3O4 significantly boosted ethanol content by 17.3% (p < 0.05) during fermentation. Subsequent findings indicated that the increase in ethanol content was associated with enhanced ethanol tolerance and improved electron transport efficiency. This study provided evidence for the positive effects of His-Fe3O4 on S. cerevisiae cells and proposed a straightforward approach to enhance ethanol production in S. cerevisiae fermentation. The mediation of improved ethanol tolerance offers significant potential in the fermentation and bioenergy sectors.

A two-photon fluorescent probe for highly selective detection of Cys over GSH and Hcy based on the Michael addition and transcyclization mechanism and its application in bioimaging and protein straining in SDS-PAGE.

BACKGROUND: Cysteine (Cys), glutathione (GSH), and homocysteine (Hcy), as three major biothiols are involved in a variety of physiological processes and play a crucial role in plant growth. Abnormal levels of Cys can cause plants to fail to grow properly. To date, although a very large number of fluorescent probes have been reported for the detection of biothiols, very few of them can be used for the selective discrimination of Cys from GSH and Hcy due to their structural similarity, and only a few of them can be used for plant imaging. RESULTS: Here, three fluorescent probes (o-/m-/p-TMA) based on TMN fluorophore and the ortho-/meta-/para-substituted maleimide recognition groups were constructed to investigate the selective response effect of Cys. Compared to the o-/m-TMA, p-TMA can selectively detect Cys over GSH and Hcy with a rapid response time (10 min) and a low detection limit (0.26 µM). The theoretical calculation confirmed that the intermediate p-TMA-Cys-int has shorter interatomic reaction distances (3.827 Å) compared to o-/m-TMA-Cys (5.533/5.287 Å), making it more suitable for further transcyclization reactions. Additionally, p-TMA has been employed for selective tracking of exogenous and endogenous Cys in Arabidopsis thaliana using both single-/two-photon fluorescence imaging. Furthermore, single cell walls produced obvious two-photon fluorescence signals, indicating that p-TMA can be used for high-concentration Cys analysis in single cells. Surprisingly, p-TMA can be used as a fluorescent dye for protein staining in SDS-PAGE with higher sensitivity (7.49 µg/mL) than classical Coomassie brilliant blue (14.11 µg/mL). SIGNIFICANCE: The outstanding properties of p-TMA make it a promising multifunctional molecular tool for the highly selective detection of Cys over GSH and Hcy in various complex environments, including water solutions, zebrafish, and plants. Additionally, it has the potential to be developed as a fluorescent dye for a simple and fast SDS-PAGE fluorescence staining method.

Design, synthesis, and biological evaluation of 5-(1H-indol-5-yl)isoxazole-3-carboxylic acids as novel xanthine oxidase inhibitors.

Xanthine oxidase (XO) is a key enzyme for the production of uric acid in the human body. XO inhibitors (XOIs) are clinically used for the treatment of hyperuricemia and gout, as they can effectively inhibit the production of uric acid. Previous studies indicated that both indole and isoxazole derivatives have good inhibitory effects against XO. Here, we designed and synthesized a novel series of N-5-(1H-indol-5-yl)isoxazole-3-carboxylic acids according to bioisosteric replacement and hybridization strategies. Among the obtained target compounds, compound 6c showed the best inhibitory activity against XO with an IC50 value of 0.13 µM, which was 22-fold higher than that of the classical antigout drug allopurinol (IC50 = 2.93 µM). Structure-activity relationship analysis indicated that the hydrophobic group on the nitrogen atom of the indole ring is essential for the inhibitory potencies of target compounds against XO. Enzyme kinetic studies proved that compound 6c acted as a mixed-type XOI. Molecular docking studies showed that the target compound 6c could not only retain the key interactions similar to febuxostat at the XO binding site but also generate some new interactions, such as two hydrogen bonds between the oxygen atom of the isoxazole ring and the amino acid residues Ser876 and Thr1010. These results indicated that 5-(1H-indol-5-yl)isoxazole-3-carboxylic acid might be an efficacious scaffold for designing novel XOIs and compound 6c has the potential to be used as a lead for further the development of novel anti-gout candidates.

Carbonized cellulose microspheres loaded with Pd NPs as catalyst in p-nitrophenol reduction and Suzuki-Miyaura coupling reaction.

Catalytic reduction of p-nitrophenol is usually carried out using transition metal nanoparticles such as gold, palladium, silver, and copper, especially palladium nanoparticles (Pd NPs), which are characterized by fast reaction rate, high turnover frequency, good selectivity, and high yield. However, the aggregation and precipitation of the metals lead to the decomposition of the catalyst, which results in a significant reduction of the catalytic activity. Therefore, the preparation of homogeneous stabilized palladium nanoparticles catalysts has been widely studied. Stabilized palladium nanoparticles mainly use synthetic polymers. Cellulose microspheres, as a natural polymer material with low-cost and porous fiber network structure, are excellent carriers for stabilizing metal nanoparticles. Cellulose microspheres impregnated with palladium metal nanoparticles were carbonized to have a larger specific surface area and highly dispersed palladium nanoparticles, which exhibited excellent catalytic activity in the catalytic reduction of p-nitrophenol. In this work, the cellulose carbon-based microspheres palladium (Pd@CCM) catalysts were designed and characterized by SEM, TEM, EDS, XRD, FTIR, XPS, TGA, BET, and so on. Furthermore, the catalytic performance of Pd@CCM catalysts was investigated via p-nitrophenol reduction, which showed high catalytic activity. This catalyst also exhibited excellent catalytic performance in the Suzuki-Miyaura coupling reaction. Linking aromatic monomer and benzene through Suzuki-Miyaura coupling was presented as an effective route to obtaining biaryls, and the synthesis method is low-cost and simple. In addition, Pd@CCM showed desirable recyclability while maintaining its catalytic activity even after five recycles. This work is highly suggestive of the design and application of the heterogeneous catalyst.

Highly stable Ag-doped Cu2O immobilized cellulose-derived carbon beads with enhanced visible-light photocatalytic degradation of levofloxacin.

Ag-doped Cu2O immobilized carbon beads (Ag/Cu2O@CB) based composite photocatalysts have been prepared for the removal of levofloxacin, an antibiotic, from water. The photocatalysts were prepared by the processes of chemical reduction and in-situ solid-phase precipitation. The composite photocatalyst was characterized by a porous and interconnected network structure. Ag nanoparticles were deposited on Cu2O particles to develop a metal-based semiconductor to increase the catalytic efficiency of the system and the separation efficiency of the photogenerated carriers. Cellulose-derived carbon beads (CBs) can also be used as electron storage libraries which can capture electrons released from the conduction band of Cu2O. The results revealed that the maximum catalytic degradation efficiency of the composite photocatalyst for the antibiotic levofloxacin was 99.02 %. The Langmuir-Hinshelwood model was used to study the reaction kinetics, and the process of photodegradation followed first-order kinetics. The maximum apparent rate was recorded to be 0.0906 min-1. The mass spectrometry technique showed that levofloxacin degraded into carbon dioxide and water in the presence of the photocatalyst. The results revealed that the easy-to-produce photocatalyst was stable and efficient in levofloxacin removing.

Evaluating the adverse effects and mechanisms of nanomaterial exposure on longevity of C. elegans: A literature meta-analysis and bioinformatics analysis of multi-transcriptome data.

Exposure to large-size particulate air pollution (PM2.5 or PM10) has been reported to increase risks of aging-related diseases and human death, indicating the potential pro-aging effects of airborne nanomaterials with ultra-fine particle size (which have been widely applied in various fields). However, this hypothesis remains inconclusive. Here, a meta-analysis of 99 published literatures collected from electronic databases (PubMed, EMBASE and Cochrane Library; from inception to June 2023) was performed to confirm the effects of nanomaterial exposure on aging-related indicators and molecular mechanisms in model animal C. elegans. The pooled analysis by Stata software showed that compared with the control, nanomaterial exposure significantly shortened the mean lifespan [standardized mean difference (SMD) = -2.30], reduced the survival rate (SMD = -4.57) and increased the death risk (hazard ratio = 1.36) accompanied by upregulation of ced-3, ced-4 and cep-1, while downregulation of ctl-2, ape-1, aak-2 and pmk-1. Furthermore, multi-transcriptome data associated with nanomaterial exposure were retrieved from Gene Expression Omnibus (GSE32521, GSE41486, GSE24847, GSE59470, GSE70509, GSE14932, GSE93187, GSE114881, and GSE122728) and bioinformatics analyses showed that pseudogene prg-2, mRNAs of abu, car-1, gipc-1, gsp-3, kat-1, pod-2, acdh-8, hsp-60 and egrh-2 were downregulated, while R04A9.7 was upregulated after exposure to at least two types of nanomaterials. Resveratrol (abu, hsp-60, pod-2, egrh-2, acdh-8, gsp-3, car-1, kat-1, gipc-1), naringenin (kat-1, egrh-2), coumestrol (egrh-2) or swainsonine/niacin/ferulic acid (R04A9.7) exerted therapeutic effects by reversing the expression levels of target genes. In conclusion, our study demonstrates the necessity to use phytomedicines that target hub genes to delay aging for populations with nanomaterial exposure.

Hypermethylation and low expression of FANCC involved in multi-walled carbon nanotube-induced toxicity on ARPE-19 cells.

Multi-walled carbon nanotube (MWCNT) exposure was observed to cause damages on the viability of ocular cells, however, the underlying mechanisms remain not well understood. Epigenetic alterations that regulate gene expression have been identified as a major responsiveness to environmental challenge. Thus, the aim of this study was to screen methylation-regulated genes involved in MWCNT exposure. The Illumina Human Methylation 850 K array was employed to determine the genome-wide DNA methylation profile of human retinal pigment epithelial cell line (ARPE-19) exposed to 50% inhibition concentration of MWCNTs (100 µg/ml) for 24 h or without (n = 3 for each group). Then, the transcriptome data obtained by high-throughput RNA sequencing previously were integrated with DNA methylome to identify the overlapped genes. As a result, the integrative bioinformatics analysis identified that compared with controls, FA complementation group C (FANCC) was hypermethylated and downregulated in MWCNT-exposed ARPE-19 cells. Quantitative real-time polymerase chain reaction analysis confirmed the mRNA expression level of FANCC was significantly decreased following MWCNT treatment and the addition of DNA methylation inhibitor 5-Aza-deoxycytidine (10 µM) reversed this decrease. Pyrosequencing analysis further validated the hypermethylation status at the 5'-untranslated promoter region of FANCC (cg14583550) in MWCNT-exposed ARPE-19 cells. Protein-protein interaction network and function analyses predicted that FANCC may contribute to MWCNT-induced cytotoxicity by interacting with heat shock protein 90 beta family member 1 and then upregulating cytokine interleukin-6 and apoptosis biomarker caspase 3. In conclusion, the present study links the epigenetic modification of FANCC with the pathogenesis of MWCNT-induced retinal toxicity.

Identification of Chinese baijiu from the same brand based on a graphene quantum dots fluorescence sensing array.

The identification of Chinese baijiu is crucial to regulating the international market and maintaining legitimate rights, as the popularity, influence and awareness of baijiu are growing. A graphene quantum dot (GQD) based fluorescence sensor array is designed in this paper. Upon using only GQDs as a single sensing element, combining three different solvents improves the sensing array's detection sensitivity while simplifying material preparation and experimental detection. Adding organic substances creates intermolecular forces between the GQDs and the solvent, causing the fluorescence intensity to change. The sensor array was able to distinguish 21 types of organic matter, different ratios of quaternary mixed organic materials and 17 types of baijiu of the same brand. It also showed excellent performance in the detection of species in blind samples, with the machine learning algorithm successfully distinguishing baijiu from five other distilled spirits. The experiment provides guidance for the practical application of GQDs and provides a simple but effective reference for sensor arrays to detect baijiu.

Effects of nanomaterial exposure on telomere dysfunction, hallmarks of mammalian and zebrafish cell senescence, and zebrafish mortality.

Environmental and occupational exposure to hazardous substances accelerates biological aging. However, the toxic effects of nanomaterials on telomere and cellular senescence (major hallmarks of the biological aging) remained controversial. This study was to synthesize all published evidence to explore the effects of nanomaterial exposure on the telomere change, cellular senescence and mortality of model animals. Thirty-five studies were included by searching electronic databases (PubMed, Embase and Web of Science). The pooled analysis by Stata 15.0 software showed that compared with the control, nanomaterial exposure could significantly shorten the telomere length [measured as kbp: standardized mean difference (SMD) = -1.88; 95% confidence interval (CI) = -3.13 - - 0.64; % of control: SMD = -1.26; 95%CI = -2.11- - 0.42; < 3 kbp %: SMD = 5.76; 95%CI = 2.92 - 8.60), increase the telomerase activity (SMD = -1.00; 95%CI = -1.74 to -0.26), senescence-associated ß-galactosidase levels in cells (SMD = 8.20; 95%CI = 6.05 - 10.34) and zebrafish embryos (SMD = 7.32; 95%CI = 4.70 - 9.94) as well as the mortality of zebrafish (SMD = 3.83; 95%CI = 2.94 - 4.72)]. The expression levels of telomerase TERT, shelterin components (TRF1, TRF2 and POT1) and senescence biomarkers (p21, p16) were respectively identified to be decreased or increased in subgroup analyses. In conclusion, this meta-analysis demonstrates that nanomaterial exposure is associated with telomere attrition, cell senescence and organismal death.

Covalent organic framework in situ grown on the metal-organic framework as fiber coating for solid-phase microextraction of polycyclic aromatic hydrocarbons in tea.

A novel MIL-88-NH2@COF composite was produced by in situ growth of covalent organic framework (COF) on the metal-organic framework (MOF) surface. To obtain a coating fiber for solid-phase microextraction (SPME), the MIL-88-NH2@COF composite physically adhered to the stainless steel wire. Combined with gas chromatography-flame ionization detection (GC-FID), various analytes such as chlorophenols (CPs), phthalates (PAEs), and polycyclic aromatic hydrocarbons (PAHs) were extracted and determined to evaluate the extraction performance of MIL-88-NH2@COF coated fibers and explore their extraction mechanism. This composite exhibit excellent extraction performance and adsorption capacity for various analytes, especially for PAHs with enrichment factor up to 9858. The SPME-GC-FID method based on MIL-88-NH2@COF fiber was established for the determination of five PAHs after the main extraction conditions were optimized. Under optimal conditions, the proposed technique showed a wide linear range (1-150 ng mL-1) with a low limit of detection (0.019 ng mL-1) and a high coefficient of determination (R2 > 0.99). The developed SPME-GC-FID method was used to determine PAHs in green tea and black tea samples, with good recoveries of 51.70-103.64% and 68.56-103.64%, respectively. It is worth mentioning that this is the first time MIL-88-NH2@COF composites have been prepared and applied to SPME. The preparation method of the composite provides a new idea in adsorbent preparation, which will contribute to the field of SPME.

Organic acid-induced triple fluorescent emission carbon quantum dots identification of distilled liquor.

An acid-sensitive carbon dot fluorescence sensing array was investigated for the differentiated recognition of distilled spirits. Due to the electrostatic interactions between CDs and organic acids, organic acids affect the protonation and fluorescence properties of CDs, which in turn modify the CDs triple fluorescence emission. The regular linear variation of the fluorescence sensor was found under acidic conditions (3.0 < pH < 6.2). A comprehensive study of acids with selectivity, different concentrations (0.1 mM, 1 mM, 10 mM, 40 mM), different types (8 species) and mixed acids (formic acid and acetic acid), and good quantification capability for acetic acid (0.01-1 mM). Demonstrating good recognition ability of the sensor array for complex analyte. On this basis, the fluorescence sensor array was applied to the classification and recognition of liquors. LDA has realized the identification of 16 kinds of Baijiu and 21 kinds of distilled liquors with an accuracy of 100%.