Interactive effects of users' openness and robot reliability on trust: evidence from psychological intentions, task performance, visual behaviours, and cerebral activations.

Although trust plays a vital role in human-robot interaction, there is currently a dearth of literature examining the effect of users' openness personality on trust in actual interaction. This study aims to investigate the interaction effects of users' openness and robot reliability on trust. We designed a voice-based walking task and collected subjective trust ratings, task metrics, eye-tracking data, and fNIRS signals from users with different openness to unravel the psychological intentions, task performance, visual behaviours, and cerebral activations underlying trust. The results showed significant interaction effects. Users with low openness exhibited lower subjective trust, more fixations, and higher activation of rTPJ in the highly reliable condition than those with high openness. The results suggested that users with low openness might be more cautious and suspicious about the highly reliable robot and allocate more visual attention and neural processing to monitor and infer robot status than users with high openness.

The study could deepen practitioners' understanding of the effect of openness on trust in robots by examining the psychological intention, task performance, visual behaviours, and physiological activations. Moreover, the interaction effect could provide guidelines for designing robots adaptive to users' personalities, and the multimodal method would be practical for measuring trust in interaction.

Developing active and intelligent biodegradable packaging from food waste and byproducts: A review of sources, properties, film production methods, and their application in food preservation.

Food waste and byproducts (FWBP) are a global issue impacting economies, resources, and health. Recycling and utilizing these wastes, due to processing and economic constraints, face various challenges. However, valuable components in food waste inspire efficient solutions like active intelligent packaging. Though research on this is booming, its material selectivity, effectiveness, and commercial viability require further analysis. This paper categorizes FWBP and explores their potential for producing packaging from both animal and plant perspectives. In addition, the preparation/fabrication methods of these films/coatings have also been summarized comprehensively, focusing on the advantages and disadvantages of these methods and their commercial adaptability. Finally, the functions of these films/coatings and their ultimate performance in protecting food (meat, dairy products, fruits, and vegetables) are also reviewed systematically. FWBP provide a variety of methods for the application of edible films, including being made into coatings, films, and fibers for food preservation, or extracting active substances directly or indirectly from them (in the form of encapsulation) and adding them to packaging to endow them with functions such as barrier, antibacterial, antioxidant, and pH response. In addition, the casting method is the most commonly used method for producing edible films, but more film production methods (extrusion, electrospinning, 3D printing) need to be tried to make up for the shortcomings of the current methods. Finally, researchers need to conduct more in-depth research on various active compounds from FWBP to achieve better application effects and commercial adaptability.

Effects of umami substances as taste enhancers on salt reduction in meat products: A review.

Sodium is one of the essential additives in meat processing, but excessive sodium intake may increase risk of hypertension and cardiovascular disease. However, reducing salt content while preserving its preservative effect, organoleptic properties, and technological characteristics poses challenges. In this review, the mechanism of salt reduction of umami substances was introduced from the perspective of gustation-taste interaction, and the effects of the addition of traditional umami substances (amino acids, nucleotides, organic acids(OAs)) and natural umami ingredients (mushrooms, seaweeds, tomatoes, soybeans, tea, grains) on the sensory properties of the meat with reduced-salt contents were summarized. In addition, the impacts of taste enhancers on eating quality (color, sensory, textural characteristics, and water-holding capacity (WHC)), and processing quality (lipid oxidation, pH) of meat products (MP) and their related mechanisms were also discussed. Among them, natural umami ingredients exhibit distinct advantages over traditional umami substances in terms of enhancing quality and nutritional value. On the basis of salt reduction, natural umami ingredients improve the flavor, texture, WHC and antioxidant capacity. This comprehensive review may provide the food industry with a theoretical foundation for mitigating salt consumption through the utilization of umami substances and natural ingredients.

Impact of coconut-fiber biochar on lead translocation, accumulation, and detoxification mechanisms in a soil-rice system under elevated lead stress.

Biochar, an environmentally friendly material, was found to passivate lead (Pb) in contaminated soil effectively. This study utilized spectroscopic investigations and partial least squares path modeling (PLS-PM) analysis to examine the impact of coconut-fiber biochar (CFB) on the translocation, accumulation, and detoxification mechanisms of Pb in soil-rice systems. The results demonstrated a significant decrease (p < 0.05) in bioavailable Pb concentration in paddy soils with CFB amendment, as well as reduced Pb concentrations in rice roots, shoots, and brown rice. Synchrotron-based micro X-ray fluorescence analyses revealed that CFB application inhibited the migration of Pb to the rhizospheric soil region, leading to reduced Pb uptake by rice roots. Additionally, the CFB treatment decreased Pb concentrations in the cellular protoplasm of both roots and shoots, and enhanced the activity of antioxidant enzymes in rice plants, improving their Pb stress tolerance. PLS-PM analyses quantified the effects of CFB on the accumulation and detoxification pathways of Pb in the soil-rice system. Understanding how biochar influences the immobilization and detoxification of Pb in soil-rice systems could provide valuable insights for strategically using biochar to address hazardous elements in complex agricultural settings.

Raman spectroscopy coupled with chemometrics for identification of adulteration and fraud in muscle foods: a review.

Muscle foods, valued for their significant nutrient content such as high-quality protein, vitamins, and minerals, are vulnerable to adulteration and fraud, stemming from dishonest vendor practices and insufficient market oversight. Traditional analytical methods, often limited to laboratory-scale., may not effectively detect adulteration and fraud in complex applications. Raman spectroscopy (RS), encompassing techniques like Surface-enhanced RS (SERS), Dispersive RS (DRS), Fourier transform RS (FTRS), Resonance Raman spectroscopy (RRS), and Spatially offset RS (SORS) combined with chemometrics, presents a potent approach for both qualitative and quantitative analysis of muscle food adulteration. This technology is characterized by its efficiency, rapidity, and noninvasive nature. This paper systematically summarizes and comparatively analyzes RS technology principles, emphasizing its practicality and efficacy in detecting muscle food adulteration and fraud when combined with chemometrics. The paper also discusses the existing challenges and future prospects in this field, providing essential insights for reviews and scientific research in related fields.

RABGGTB plays a critical role in ALS pathogenesis.

Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disease with unknown causes, which mainly affects motor neurons in the anterior horn of the spinal cord, brain stem, and cerebral cortex, also known as motor neuron disease. An important pathological feature of ALS is the formation of aggregates of mutant SOD1 protein, CTF25 of TDP-43, or other abnormal proteins in motor neurons, which require autophagy for degradation. Protein prenylation is known to participate in membrane association and proper localization of proteins. RABGGTB is the ß subunit of GGTase II (one of the prenyltransferases) that can regulate autophagy via Rab7 geranylgeranylation. In this study, we overexpressed RABGGTB via lentiviral transfection in NSC34-hSOD1G93A and TDP-43 cells. Overexpression of RABGGTB improved ALS cell proliferation by facilitating autophagosome-lysosome fusion. Furthermore, the abnormal aggregation of SOD1 protein was reduced. This indicates that protein prenylation is important for the proliferation and autophagy of cells autophagy. Enhanced autophagy has been observed in two of the most widely used ALS cell models. These findings indicate the widespread applicability of prenylation in ALS. In summary, overexpression of RABGGTB improved the geranylgeranylation of the Rab7 protein and had a positive effect on cells. These findings provide insights into the development of a novel therapeutic strategy for ALS.

Metaphyseal Metal Sleeves for Reconstruction of Severe Knee Bone Defects: Excellent Survival Rate at a Mean Follow-Up of 6.4 Years.

OBJECTIVE: Management of bone loss in complex primary and revision total knee arthroplasty is key to the surgeries. Metaphyseal metal sleeves have been increasingly used recently to reconstruct severe knee metaphyseal bone defects. This study aimed to investigate the outcomes of the metaphyseal sleeve reconstructing Anderson Orthopedic Research Institute (AORI) type II and type III bone defects of knee joint. METHODS: From 2014 to 2019, a total of 44 knees were enrolled in this clinical retrospective study after the screening, including seven cases of primary TKA and 37 cases of revision TKA. The types of bone defects involved in this study were AORI types II and III, and did not involve AORI type I bone defects. Patients' knee function preoperatively and postoperatively as well as quality of life were recorded and analyzed. Analysis included the American Knee Society Score (KSS), hospital for special surgery knee score (HSS), the Western Ontario and McMaster Universities (WOMAC) index, the Short Form 12 (SF-12) health survey, visual analogue scale score, and radiographic assessment with a mean follow-up of 6.4 years. Paired t-tests were used to determine the significance of changes in clinical scores and knee mobility. RESULTS: A mean follow-up of 77.2 (±17.6, standard deviation [SD]) months was performed, and none of the patients underwent knee revision for infection or aseptic loosening. At the last follow-up, the KSS knee score changed statistically from 37.1 (±19.7) preoperatively to 86.5 (±13.6, SD, p < 0.001) postoperatively and the KSS function score from 32.7 (±24.0) preoperatively to 78.3 (±15.6, SD, p < 0.001) postoperatively. The knee mobility improved from a mean of preoperative 72.61° (±33.42°, SD) to 108.52° (±24.15°, SD, p < 0.001). Postoperative radiographs showed that the host bone was tightly integrated with the metaphyseal metal sleeve, and there was no obvious translucent line formation around the sleeve. Of the patients, 86.4% had a postoperative satisfaction score ≥8 (10-point scale). CONCLUSION: At the mean follow-up of 6.4 years, the survival rate of the metaphyseal sleeves was 100%. Metaphyseal sleeves combined with cementless stems is an excellent and viable option for reconstruction of AORI type II and type III bone defects of the knee.

Flat bands, non-trivial band topology and rotation symmetry breaking in layered kagome-lattice RbTi3Bi5.

A representative class of kagome materials, AV3Sb5 (A = K, Rb, Cs), hosts several unconventional phases such as superconductivity, [Formula: see text] non-trivial topological states, and electronic nematic states. These can often coexist with intertwined charge-density wave states. Recently, the discovery of the isostructural titanium-based single-crystals, ATi3Bi5 (A = K, Rb, Cs), which exhibit similar multiple exotic states but without the concomitant charge-density wave, has opened an opportunity to disentangle these complex states in kagome lattices. Here, we combine high-resolution angle-resolved photoemission spectroscopy and first-principles calculations to investigate the low-lying electronic structure of RbTi3Bi5. We demonstrate the coexistence of flat bands and several non-trivial states, including type-II Dirac nodal lines and [Formula: see text] non-trivial topological surface states. Our findings also provide evidence for rotational symmetry breaking in RbTi3Bi5, suggesting a directionality to the electronic structure and the possible emergence of pure electronic nematicity in this family of kagome compounds.

MIR-107/HMGB1/FGF-2 axis responds to excessive mechanical stretch to promote rapid repair of vascular endothelial cells.

The increase of vascular wall tension can lead to endothelial injury during hypertension, but its potential mechanism remains to be studied. Our results of previous study showed that HUVECs could induce changes in HMGB1/RAGE to resist abnormal mechanical environments in pathological mechanical stretching. In this study, we applied two different kinds of mechanical tension to endothelial cells using the in vitro mechanical loading system FlexCell-5000T and focused on exploring the expression of miR-107 related pathways in HUVECs with excessive mechanical tension. The results showed that miR-107 negatively regulated the expression of the HMGB1/RAGE axis under excessive mechanical tension. Excessive mechanical stretching reduced the expression of miR-107 in HUVECs, and increased the expression of the HMGB1/RAGE axis. When miR-107 analog was transfected into HUVECs with lipo3000 reagent, the overexpression of miR-107 slowed down the increase of the HMGB1/RAGE axis caused by excessive mechanical stretching. At the same time, the overexpression of miR-107 inhibited the proliferation and migration of HUVECs to a certain extent. On the contrary, when miR-107 was silent, the proliferation and migration of HUVECs showed an upward trend. In addition, the study also showed that under excessive mechanical tension, miR-107 could regulate the expression of FGF-2 by HMGB1. In conclusion, these findings suggest that pathological mechanical stretching promote resistance to abnormal mechanical stimulation on HUVECs through miR-107/HMGB1/RAGE/FGF-2 pathway, thus promote vascular repair after endothelial injury. The suggest that miR-107 is a potential therapeutic target for hypertension.

Application of three-dimensional cell culture technology in screening anticancer drugs.

The drug development process involves a variety of drug activity evaluations, which can determine drug efficacy, strictly analyze the biological indicators after the drug action, and use these indicators as the preclinical drug evaluation criteria. At present, most of the screening of preclinical anticancer drugs mainly relies on traditional 2D cell culture. However, this traditional technology cannot simulate the tumor microenvironment in vivo, let alone reflect the characteristics of solid tumors in vivo, and has a relatively poor ability to predict drug activity. 3D cell culture is a technology between 2D cell culture and animal experiments, which can better reflect the biological state in vivo and reduce the consumption of animal experiments. 3D cell culture can link the individual study of cells with the study of the whole organism, reproduce in vitro the biological phenotype of cells in vivo more greatly, and thus predict the activity and resistance of anti-tumor drugs more accurately. In this paper, the common techniques of 3D cell culture are discussed, with emphasis on its main advantages and application in the evaluation of anti-tumor resistance, which can provide strategies for the screening of anti-tumor drugs.

Observation of Electronic Nematicity Driven by the Three-Dimensional Charge Density Wave in Kagome Lattice KV3Sb5.

Kagome superconductors AV3Sb5 (A = K, Rb, Cs) provide a fertile playground for studying intriguing phenomena, including nontrivial band topology, superconductivity, giant anomalous Hall effect, and charge density wave (CDW). Recently, a C2 symmetric nematic phase prior to the superconducting state in AV3Sb5 drew enormous attention due to its potential inheritance of the symmetry of the unusual superconductivity. However, direct evidence of the rotation symmetry breaking of the electronic structure in the CDW state from the reciprocal space is still rare, and the underlying mechanism remains ambiguous. The observation shows unconventional unidirectionality, indicative of rotation symmetry breaking from six-fold to two-fold. The interlayer coupling between adjacent planes with π-phase offset in the 2 × 2 × 2 CDW phase leads to the preferred two-fold symmetric electronic structure. These rarely observed unidirectional back-folded bands in KV3Sb5 may provide important insights into its peculiar charge order and superconductivity.

A combination of acidic electrolyzed water with modified atmosphere packaging improves quality of jujube during cold storage by enhancing antioxidant activity.

This study aimed to investigate the effects of a combination of acidic electrolyzed water (AEW) and modified atmosphere packaging (MAP) on the quality of jujube stored at 1 ± 0.5°C for 40 days. Jujube was treated with AEW + MAP, AEW, and MAP, respectively, to identify an appropriate preservation method based on the changes of quality indicators, activities of antioxidant enzymes and nonenzymatic antioxidant systems, malondialdehyde (MDA) content, and cell membrane permeability. Results showed that the combined treatment maintained higher storage quality of jujube than the other three treatments. The combined treatment significantly suppressed softening, weight, and color loss and maintained total soluble solid and titratable acidity. Moreover, the combined treatment improved antioxidant capacity showing high levels of nonenzymatic antioxidant systems (ascorbic acid and 1,1-diphenyl-2-picrylhydrazyl radical scavenging capacity), and the activities of antioxidant enzymes (ascorbate peroxidase, superoxide dismutase, and catalase). These effects remarkably suppressed the increase of MDA level and cell membrane permeability, thereby inhibiting oxidative damage and alleviating quality deterioration. Furthermore, kinetic model indicated that AEW + MAP decreased rate constant of quality deterioration. Principal component analysis also showed that AEW + MAP treatment alleviated quality deterioration, with higher comprehensive score than other treatments. In summary, AEW + MAP was an effective preservation method to maintain storage quality and delay postharvest senescence of jujube. PRACTICAL APPLICATION: In this study, a combination of acidic electrolyzed water (AEW) with modified atmosphere packaging (MAP) has been found to have effective preservation effects on jujube. AEW + MAP treatment improved quality of jujube during cold storage mainly by enhancing antioxidant capacity. The combined treatment may provide a new preservation technology for jujube.

Exosomes from adipose-derived mesenchymal stem cells can attenuate liver injury caused by minimally invasive hemihepatectomy combined with ischemia-reperfusion in minipigs by modulating the endoplasmic reticulum stress response.

AIMS: Hepatic ischemia-reperfusion injury (IRI) impairs postoperative recovery of liver function after liver resection or transplantation. It is crucial to minimize liver injury during surgery in order to improve patient survival and quality of life. The aim of this study was to explore the therapeutic efficacy of exosomes from adipose-derived mesenchymal stem cells (ADSCs-exo) against hepatectomy combined with IRI injury and compare that with the effect of adipose-derived mesenchymal stem cells (ADSCs). MAIN METHOD: Minimally invasive hemihepatectomy combined with hepatic IRI was established in minipigs. A single dose of ADSCs-exo, ADSCs or PBS was injected through the portal vein. The histopathological features and function of the liver, and the oxidative stress levels, endoplasmic reticulum (ER) ultrastructure and ER stress (ERS) response were analyzed pre- and postoperatively. KEY FINDINGS: ADSCs-exo alleviated the histopathological injuries and ultrastructural changes in the ER, and significantly improved ALP, TP and CAT levels. Furthermore, ADSCs-exo treatment also downregulated ERS-related factors such as GRP78, ATF6, IRE1α/XBP1, PERK/eIF2α/ATF4, JNK and CHOP. The therapeutic effects of ADSCs-exo and ADSCs were similar. SIGNIFICANCE: Intravenous administration of a single dose of ADSCs-exo is a novel cell-free therapeutic approach to improve surgery-related liver injury. Our findings provide evidence of the paracrine effect of ADSCs and an experimental basis for treating liver injury with ADSCs-exo instead of ADSCs.

ADSCs-exo attenuates hepatic ischemia-reperfusion injury after hepatectomy by inhibiting endoplasmic reticulum stress and inflammation.

Hepatic ischemia-reperfusion (I/R) injury commonly occurs during liver surgery. Exosomes from adipose-derived stem cells (ADSCs-exo) induce a hepatoprotective effect during hepatic I/R injury. This study aimed to investigate the possible mechanism by which ADSCs-exo attenuates hepatic I/R injury in rats. Rats were randomly divided into four groups: Sham, I30R + PH, ADSCs, and ADSCs-exo groups. Liver tissues were collected immediately after 24 h of reperfusion for further analyses. The content of inflammatory factors in liver tissue was detected using enzyme-linked immunosorbent assay. The pathological changes in liver tissue were analyzed using HE staining. Transmission electron microscopy was used to visualize the ultrastructural changes of hepatocytes. Real-time quantitative polymerase chain reaction (RT-qPCR) and western blot analysis were used to detect the expression of endoplasmic reticulum stress (ERS)-related genes and proteins. Liver histomorphology and hepatocyte ultrastructure changes improved after ADSCs-exo treatment. Moreover, ADSCs-exo treatment significantly downregulated tumor necrosis factor-α, interleukin-1ß (IL-1ß), and IL-6 levels while upregulating IL-10 levels. Western blot analysis suggested that the protein expressions of GRP78, p-PERK, p-eIF2α, p-IRE1α, XBP1s, ATF-6, ATF-4, CHOP, p-JNK, cleaved-Caspase-3, cleaved Caspase-9, and cleaved Caspase-12 significantly decreased after ADSCs-exo treatment. RT-qPCR results demonstrated that mRNA expression of GRP78, IRE1α, XBP1, ATF-6, ATF-4, CHOP, JNK, Caspase-3, Caspase-9, and Caspase-12 markedly reduced after ADSCs-exo treatment. In conclusion, ADSCs-exo protects against hepatic I/R injury after hepatectomy by inhibiting ERS and inflammation. Therefore, ADSCs-exo can be considered as a viable option for the treatment of hepatic I/R injury.

Lithium-plasmon-based low-powered dynamic color display.

Display and power supply have been two essential and independent cornerstones of modern electronics. Here, we report a lithium-plasmon-based low-powered dynamic color display with intrinsic dual functionality (plasmonic display and energy recycling unit) which is a result of the electric-field-driven transformation of nanostructured lithium metals. Dynamic color displays are enabled by plasmonic transformation through electrodeposition (electrostripping) of lithium metals during the charging (discharging) process, while the consumed energy for coloring can be retrieved in the inverse process respectively. Energy recycling of lithium metals brings energy consumption down to 0.390 mW cm-2 (0.105 mW cm-2) for the active (static) coloration state of a proof-of-concept display/battery device, which approaches nearly-zero-energy-consumption in the near-100%-energy-efficiency limit of commercial lithium batteries. Combining the subwavelength feature of plasmonics with effective energy recycling, the lithium-plasmon-based dynamic display offers a promising route towards next-generation integrated photonic devices, with the intriguing advantages of low energy consumption, a small footprint and high resolution.

HMGB1/RAGE axis accelerates the repair of HUVECs injured by pathological mechanical stretching via promoting bFGF expression.

AIM: During hypertension-induced endothelial dysfunction, periodic mechanical stretching (MS) activates related inflammatory pathways and leads to endothelial damage, but the underlying mechanisms remain unknown. The present study aimed to determine the injury of HUVECs caused by overstretching and the role of HMGB1-RAGE pathway in HUVECs after injury. MAIN METHODS AND KEY FINDINGS: Human umbilical vein endothelial cells (HUVECs) were cultured and seeded in BioFlex™ plates (six wells). Cells were exposed to 5% (physiological state) and 20% (pathological state) mechanical stretch at 1 Hz for 12 or 24 h in a Flexcell-5000™, with unstretched cells serving as controls. It was found that excessive MS can inhibit cell viability, proliferation, and tube-forming ability resulting in disordered cell arrangement and orientation, slowing cell migration. All these changes cause endothelial damage compared to physiological MS. Endothelial cells (ECs) promote cell migration and self-repair after injury by increasing the High-mobility group box 1 (HMGB1) expression. Experiments and protein prediction networks have shown that HMGB1 can also promote the expression of downstream protein bFGF by binding to receptor for advanced glycation end products (RAGE). Interestingly, VEGF protein expression did not change significantly during this repair process, implying that bFGF replaces the role of VEGF in vascular endothelial repair. SIGNIFICANCE: The present study demonstrates that in the context of endothelial injury caused by excessive MS, the HMGB1/RAGE/bFGF pathway is activated and promotes endothelial repair after injury. Therefore, understanding these mechanisms will help find new therapies for diseases such as hypertension, atherosclerosis, and aneurysm formation.

Study on Long-Term Tracing of Fibroblasts on Three-Dimensional Tissue Engineering Scaffolds Based on Graphene Quantum Dots.

In order to find a convenient and stable way to trace human skin fibroblasts (HSFs) in three-dimensional tissue engineering scaffolds for a long time, in this experiment, Graphene Oxide Quantum Dots (GOQDs), Amino Graphene Quantum Dots (AGQDs) and Carboxyl Graphene Quantum Dots (CGQDs) were used as the material source for labeling HSFs. Exploring the possibility of using it as a long-term tracer of HSFs in three-dimensional tissue engineering scaffolds, the contents of the experiment are as follows: the HSFs were cultured in a cell-culture medium composed of three kinds of Graphene Quantum Dots for 24 h, respectively; (1) using Cell Counting Kit 8 (CCK8), Transwell migration chamber and Phalloidin-iFlior 488 to detect the effect of Graphene Quantum Dots on the biocompatibility of HSFs; (2) using a living cell workstation to detect the fluorescence labeling results of three kinds of Graphene Quantum Dots on HSFs, and testing the fluorescence attenuation of HSFs for 7 days; (3) the HSFs labeled with Graphene Quantum Dots were inoculated on the three-dimensional chitosan demethylcellulose sodium scaffold, and the living cell workstation was used to detect the spatial distribution of the HSFs on the three-dimensional scaffold through the fluorescence properties of the HSFs.. Experimental results: (1) the results of CCK8, Transwell migration, and FITC-Phalloidin cytoskeleton test showed that the three kinds of Graphene Quantum Dots had no effect on the biological properties of HSFs (p < 0.05); (2) the results of the fluorescence labeling experiment showed that only AGQDs could make HSFs fluorescent, and cells showed orange−red fluorescence; (3) the results of long-range tracing of HSFs which were labeled by with AGQDs showed that the fluorescence life of the HSFs were as long as 7 days; (4) The spatial distribution of HSFs can be detected on the three-dimensional scaffold based on their fluorescence properties, and the detection time can be up to 7 days.

The responses to long-term nitrogen addition of soil bacterial, fungal, and archaeal communities in a desert ecosystem.

Nitrogen (N) deposition is a worldwide issue caused by human activity. Long-term deposition of N strongly influences plant productivity and community composition. However, it is still unclear how the microbial community responds to long-term N addition in a desert ecosystem. Therefore, a long-term experiment was conducted in the Gurbantonggut Desert in northwestern China in 2015. Four N addition rates, 0 (CK), 5 (N1), 20 (N2), and 80 (N3) kg N ha-1 yr.-1, were tested and the soil was sampled after 6 years of N addition. High-throughput sequencing (HTS) was used to analyze the soil microbial composition. The HTS results showed that N addition had no significant effect on the bacterial α-diversity and ß-diversity (p > 0.05) but significantly reduced the archaeal ß-diversity (p < 0.05). The fungal Chao1 and ACE indexes in the N2 treatment increased by 24.10 and 26.07%, respectively. In addition, N addition affected the bacterial and fungal community structures. For example, compared to CK, the relative abundance of Actinobacteria increased by 17.80%, and the relative abundance of Bacteroidetes was reduced by 44.46% under N3 treatment. Additionally, N addition also changed the bacterial and fungal community functions. The N3 treatment showed increased relative abundance of nitrate-reducing bacteria (27.06% higher than CK). The relative abundance of symbiotrophic fungi was increased in the N1 treatment (253.11% higher than CK). SOC and NH4 +-N could explain 62% of the changes in the fungal community function. N addition can directly affect the bacterial community function or indirectly through NO3 --N. These results suggest that different microbial groups may have various responses to N addition. Compared with bacteria and fungi, the effect of N addition was less on the archaeal community. Meanwhile, N-mediated changes of the soil properties play an essential role in changes in the microbial community. The results in the present study provided a reliable basis for an understanding of how the microbial community in a desert ecosystem adapts to long-term N deposition.

The optimal screw-hole positions of the eccentric revision cup based on a morphological study.

BACKGROUND: Bridging bone defects in revision total hip arthroplasty is a challenge to orthopedic surgeons. The eccentric revision cup is a progression of jumbo cup. Our aim is to confirm the optimal screw-hole positions of the eccentric revision cup by morphological measurements of three-dimensional pelvic reconstruction. METHODS: Eighty CT images were converted to virtual three-dimensional bones. After simulating the surgery procedure, all available screw holes were inserted with the screws in virtual. By measuring the length of the screw in the pelvic bone, we determined the rich bone stock area. Then the screw holes were designed according to the characteristics of bone stock distribution. The peripheral screw-hole cluster and inner screw-hole cluster were studied respectively. RESULTS: For peripheral screw-hole cluster, five screw holes were evenly distributed between point A and point B in the thicker rim. For inner screw-hole cluster, screw hole 1 and screw hole 2 are the recommended inner screw holes. CONCLUSION: The eccentric revision cup has inherited the strengths of jumbo cup besides several unique advantages, including using the peripheral screws enhancing primary stability; decreasing the shift of hip rotation center and restoring biomechanical function; reducing the risk of dislocation because of the smaller head-cup differences; increasing the contact area between the outer cup and the host bone while maintaining a normal inclination of the inner cup. In this study, we confirmed the optimal screw-hole positions of the eccentric revision cup by surgical simulation and morphological measurement. However, biomechanical tests are still being further explored.

The application of custom-made 3D-printed titanium augments designed through surgical simulation for severe bone defects in complex revision total hip arthroplasty.

BACKGROUND: With the development of radiology and three-dimensional (3D) printing technology, custom-made 3D-printed titanium augments have been more widely used. However, the radiological and clinical outcomes of custom-made augments lack reports. To better understand the clinical effect of using 3D-printed titanium augments and the significance of accurate placement, the aim of this study was to assess the outcomes when using custom-made 3D-printed titanium augments and to validate the idea that surgical simulation should be done before designing custom-made augments. METHODS: A retrospective review was conducted on 31 surgical simulations and revision total hip arthroplasties using custom-made 3D-printed titanium augments. The safe zone, cup position, and hip rotation center were measured on anteroposterior radiographs. Clinical outcomes were assessed with a mean 21.1 months of follow-up. RESULTS: All patients were positioned within the safe zone, and none of the acetabular cups nor the custom-made augments had any evidence of migration at the latest follow-up. A strong correlation was found between the planned cup position and the postoperative position. The average vertical position of the center of rotation was significantly increased from 3.55 cm to 2.35 cm. The mean Harris Hip Score was increased from 40.81 preoperatively to 65.46 postoperatively. Complications included gait abnormality, groin pain, fracture of the greater trochanter, and partial palsy of the sciatic nerve. However, patient satisfaction reached 92.3%. CONCLUSION: Surgical simulations help to design custom-made augments accurately and improve surgical plans. Acetabular components supported with custom-made 3D-printed augments is a useful method to bridge severe bone deficiencies. In this study, both the radiologic results and clinical outcomes were favorable. LEVEL OF EVIDENCE: Level 4.